Re: New design
Bill It looks a nice little machine, in fact it is power to my elbow, I am thinking of taking parts from the Woodchuck motors etc. But early days yet, Richard On Thursday, May 4, 2017 at 5:29:58 AM UTC+1, Curtis wrote: > > Just wanted to know what you all think? > This is just a test piece, I think it will become a pencil holder??? I > just wanted to try something new. > Any and All input is as always welcome! ;-) > > C.A.G. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: New design
Thanks tim i wasn’t sure if it was yours or not. Defiantly a fun accessory for the mills Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Wednesday, 10 May 2017 2:33 PM To: Legacy Ornamental Mills Subject: RE: New design That my waved object. For those that don't know: http://www.artscopes.com/legacyornamentalmill/tools/waveattachment/waveattachment.html -Tim Sent from BlueMail <http://www.bluemail.me/r?b=9660> On May 9, 2017, at 8:44 PM, Bill Bulkeley wrote: Reciprocator or wave attachment usually made by tim on here or made yourself curt has been posting about it a few times recently Here is my version on the revo and also what they can produce I’m not sure who made this wave but one of the original members Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of MWF Sent: Wednesday, 10 May 2017 10:42 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Ok Richard - What's a "Reciprocator"? Is it something that Legacy only sold in "The Empire"? I have never heard of nor seen one in "The Colonies" (USA). Mac _ _ -Original Message- From: Richard Ellis Sent: May 9, 2017 3:14 PM To: Legacy Ornamental Mills Cc: Legacy-Ornamental-Mills@googlegroups.com, curtgeo...@wowway.com Subject: Re: New design Hi Curtis, That piece looks great As you probably know I have just managed to get a Revo, half an hour ago I did my very first cut on it. And that was using the reciprocator that came with it, Now if I can do what you do on your reciprocator I shall be more than pleased, Don't know how long it will be before I get power to the drives??? Cheers Richard On Thursday, May 4, 2017 at 5:29:58 AM UTC+1, Curtis wrote: Just wanted to know what you all think? This is just a test piece, I think it will become a pencil holder??? I just wanted to try something new. Any and All input is as always welcome! ;-) C.A.G. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: New design
That my waved object. For those that don't know: http://www.artscopes.com/legacyornamentalmill/tools/waveattachment/waveattachment.html -Tim Sent from BlueMail On May 9, 2017, 8:44 PM, at 8:44 PM, Bill Bulkeley wrote: > > >Reciprocator or wave attachment usually made by tim on here or made >yourself curt has been posting about it a few times recently > > > >Here is my version on the revo and also what they can produce I’m not >sure who made this wave but one of the original members > > > >Bill > > > > > > > >From: legacy-ornamental-mills@googlegroups.com >[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of MWF >Sent: Wednesday, 10 May 2017 10:42 AM >To: legacy-ornamental-mills@googlegroups.com >Subject: Re: New design > > > >Ok Richard - >What's a "Reciprocator"? Is it something that Legacy only sold in "The >Empire"? >I have never heard of nor seen one in "The Colonies" (USA). >Mac > > _ > > _ > >-Original Message- >From: Richard Ellis >Sent: May 9, 2017 3:14 PM >To: Legacy Ornamental Mills >Cc: Legacy-Ornamental-Mills@googlegroups.com, curtgeo...@wowway.com >Subject: Re: New design > >Hi Curtis, > >That piece looks great > >As you probably know I have just managed to get a Revo, half an hour >ago I did my very first cut on it. And that was using the reciprocator >that came with it, Now if I can do what you do on your reciprocator I >shall be more than pleased, Don't know how long it will be before I get >power to the drives??? > >Cheers > >Richard >On Thursday, May 4, 2017 at 5:29:58 AM UTC+1, Curtis wrote: > >Just wanted to know what you all think? > >This is just a test piece, I think it will become a pencil holder??? I >just wanted to try something new. > >Any and All input is as always welcome! ;-) > > > >C.A.G. > >-- >You received this message because you are subscribed to the Google >Groups "Legacy Ornamental Mills" group. >To unsubscribe from this group and stop receiving emails from it, send >an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >To post to this group, send email to >legacy-ornamental-mills@googlegroups.com. >Visit this group at >https://groups.google.com/group/legacy-ornamental-mills. >For more options, visit https://groups.google.com/d/optout. > > > > > > ><http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > > >Virus-free. ><http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> >www.avg.com > >-- >You received this message because you are subscribed to the Google >Groups "Legacy Ornamental Mills" group. >To unsubscribe from this group and stop receiving emails from it, send >an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >To post to this group, send email to >legacy-ornamental-mills@googlegroups.com. >Visit this group at >https://groups.google.com/group/legacy-ornamental-mills. >For more options, visit https://groups.google.com/d/optout. > >-- >You received this message because you are subscribed to the Google >Groups "Legacy Ornamental Mills" group. >To unsubscribe from this group and stop receiving emails from it, send >an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >To post to this group, send email to >legacy-ornamental-mills@googlegroups.com. >Visit this group at >https://groups.google.com/group/legacy-ornamental-mills. >For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: New design
Ok Richard - What's a "Reciprocator"? Is it something that Legacy only sold in "The Empire"? I have never heard of nor seen one in "The Colonies" (USA). Mac-Original Message- From: Richard Ellis Sent: May 9, 2017 3:14 PM To: Legacy Ornamental Mills Cc: Legacy-Ornamental-Mills@googlegroups.com, curtgeo...@wowway.com Subject: Re: New design Hi Curtis,That piece looks greatAs you probably know I have just managed to get a Revo, half an hour ago I did my very first cut on it. And that was using the reciprocator that came with it, Now if I can do what you do on your reciprocator I shall be more than pleased, Don't know how long it will be before I get power to the drives???Cheers RichardOn Thursday, May 4, 2017 at 5:29:58 AM UTC+1, Curtis wrote:Just wanted to know what you all think?This is just a test piece, I think it will become a pencil holder??? I just wanted to try something new. Any and All input is as always welcome! ;-)C.A.G. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: New design
What are your impressions on the revo so far or is it too early to tell yet? Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis Sent: Wednesday, 10 May 2017 5:14 AM To: Legacy Ornamental Mills Cc: Legacy-Ornamental-Mills@googlegroups.com; curtgeo...@wowway.com Subject: Re: New design Hi Curtis, That piece looks great As you probably know I have just managed to get a Revo, half an hour ago I did my very first cut on it. And that was using the reciprocator that came with it, Now if I can do what you do on your reciprocator I shall be more than pleased, Don't know how long it will be before I get power to the drives??? Cheers Richard On Thursday, May 4, 2017 at 5:29:58 AM UTC+1, Curtis wrote: Just wanted to know what you all think? This is just a test piece, I think it will become a pencil holder??? I just wanted to try something new. Any and All input is as always welcome! ;-) C.A.G. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: New design
Hi Curtis, That piece looks great As you probably know I have just managed to get a Revo, half an hour ago I did my very first cut on it. And that was using the reciprocator that came with it, Now if I can do what you do on your reciprocator I shall be more than pleased, Don't know how long it will be before I get power to the drives??? Cheers Richard On Thursday, May 4, 2017 at 5:29:58 AM UTC+1, Curtis wrote: > > Just wanted to know what you all think? > This is just a test piece, I think it will become a pencil holder??? I > just wanted to try something new. > Any and All input is as always welcome! ;-) > > C.A.G. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: New design
If the roller that contacts the rosette template came in from the side instead of underneath would that make a larger pattern on the work If so have it move from the side to the bottom would change the pattern size or am i on the wrong track Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Sent: Sunday, 7 May 2017 4:10 PM To: Legacy Ornamental Mills Subject: Re: New design It would be nice to be able to increase or decrease the amplitude of the rossette. Any ideas? -Tim On Saturday, May 6, 2017 at 6:12:19 PM UTC-7, aussiman wrote: It’s nice is it possible to get the pattern in the flute to stand out a little more? . I think that would really make it pop Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Sunday, 7 May 2017 8:55 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Hi Bill I agree here is the first thing, that I tried it out on today. Please let me know what you think? C.A.G. _ From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, May 6, 2017 6:25:21 PM Subject: RE: New design It sure is a different and unique pattern something defiantly to keep to be used on future projects Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Sunday, 7 May 2017 6:36 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Hello Everyone Never give up! today's play time turned out something that I will be using more in the future. ;-) Its time of the Happy Dance!!! C.A.G. _ From: "CURTIS GEORGE" To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 5, 2017 9:50:09 AM Subject: Re: New design Thank you. The idea is to get the most of of the Legacy, I started looking as some other Ornamental turning equipment, trying to figure out different ways to make something different, I found an Ornamental slide rest in one of my Holtzappffel turning books. The concept of template following was made in the design of the Legacy, but how could I get more from a template then just following a straight line? Since Tim found the Atkinson"s reciprocating jig (which became the Wave attachment) I figured that the two concepts were close enough to each-other to be useful on the Legacy. I am still playing around with different shapes and sizes of templates. I am finding the simpler template shapes work best, Oval,triangle,square, hart shape ... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) dose not work well with this concept. Now what I am also looking at is , different types of cuts as well. example cutting form the side vs the top. or cutting for off center vs on center... I am planing to try an off center cut today, My theory is off center with a cutter and a more quick changing template, should give me a pumping action look (which is more an OT type of looking cut.) Wish me luck. and I will let you all know how it turns out. ;-) talk to you all more, latter. C.A.G. _ From: "Ccm Ccm" To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 5, 2017 7:21:52 AM Subject: Re: New design Looks nice, I like the idea On Thursday, May 4, 2017, CURTIS GEORGE wrote: No problems there. ;-) I can go into more detail latter. All that I can say at this min. is there are a lot of possibility out there . Im going to hit the hay now. talk to you more latter. Have a good night. C.A.G. _ From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:38:59 AM Subject: RE: New design Oops you already did i didn’t see till i enlarged the pics Nice Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Thursday, 4 May 2017 3:36 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New design That’s great curt can you show the Rosetta that made that pattern Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Thursday, 4 May 2017 3:23 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Just another one on the mill. C.A.G. _ From: "CURTIS GEORGE" To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:17:11 AM Subject: Re: New design HI Bill No but you are close. its my home made jig that I am calling the Rose Follower . I used a 1/8" bull nose bit. and as you can see in the photo, I am playing around with an oval shaped pattern at this time, Switching the pattern/book mark
RE: New design
I like that side reading bit in your pic is it magnates ? how would the pattern go with a 90 degree V side reeding bit? Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Sunday, 7 May 2017 12:09 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design I think so? but at this time I just have not figured out how to do it,yet. I was hoping that with a different router bit will make it more pronounced? (and that still might be... perhaps a smaller cutter?) Tomorrow I am going to try it with a side fluting cutter bit. If that doesn't work, I think its more the template/rosette that needs to be bigger. or perhaps a finer follower...? I wish that I knew? I am having fun, exploring new ideas, and different methods. All the I can say now is, Those OLD DUDES had some very real smarts...( the OT guys.) ;-) If a man could do in back in the late 1700's. Im sure that, with a little work, I should be able to at the very least understand how to get this done. ;-) I want to be fully honest with everyone here, I would like you all to help me. Im sure someone out there could, or perhaps as a part of a collective we could do some Really Cool stuff with our Legacy's At least that's part of my goal. Have a good night. C.A.G. _ From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, May 6, 2017 9:12:09 PM Subject: RE: New design It’s nice is it possible to get the pattern in the flute to stand out a little more? . I think that would really make it pop Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Sunday, 7 May 2017 8:55 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Hi Bill I agree here is the first thing, that I tried it out on today. Please let me know what you think? C.A.G. _ From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, May 6, 2017 6:25:21 PM Subject: RE: New design It sure is a different and unique pattern something defiantly to keep to be used on future projects Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Sunday, 7 May 2017 6:36 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Hello Everyone Never give up! today's play time turned out something that I will be using more in the future. ;-) Its time of the Happy Dance!!! C.A.G. _ From: "CURTIS GEORGE" To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 5, 2017 9:50:09 AM Subject: Re: New design Thank you. The idea is to get the most of of the Legacy, I started looking as some other Ornamental turning equipment, trying to figure out different ways to make something different, I found an Ornamental slide rest in one of my Holtzappffel turning books. The concept of template following was made in the design of the Legacy, but how could I get more from a template then just following a straight line? Since Tim found the Atkinson"s reciprocating jig (which became the Wave attachment) I figured that the two concepts were close enough to each-other to be useful on the Legacy. I am still playing around with different shapes and sizes of templates. I am finding the simpler template shapes work best, Oval,triangle,square, hart shape ... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) dose not work well with this concept. Now what I am also looking at is , different types of cuts as well. example cutting form the side vs the top. or cutting for off center vs on center... I am planing to try an off center cut today, My theory is off center with a cutter and a more quick changing template, should give me a pumping action look (which is more an OT type of looking cut.) Wish me luck. and I will let you all know how it turns out. ;-) talk to you all more, latter. C.A.G. _ From: "Ccm Ccm" To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 5, 2017 7:21:52 AM Subject: Re: New design Looks nice, I like the idea On Thursday, May 4, 2017, CURTIS GEORGE wrote: No problems there. ;-) I can go into more detail latter. All that I can say at this min. is there are a lot of possibility out there . Im going to hit the hay now. talk to you more latter. Have a good night. C.A.G. _ From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:38:59 AM Subject: RE: New design Oops you already did i didn’t see till i enlarged the pics Nice Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@go
Re: New design
It would be nice to be able to increase or decrease the amplitude of the rossette. Any ideas? -Tim On Saturday, May 6, 2017 at 6:12:19 PM UTC-7, aussiman wrote: > > It’s nice is it possible to get the pattern in the flute to stand out a > little more? . I think that would really make it pop > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com [mailto: > legacy-ornamental-mills@googlegroups.com] *On Behalf Of *CURTIS GEORGE > *Sent:* Sunday, 7 May 2017 8:55 AM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: New design > > > > Hi Bill > > I agree here is the first thing, that I tried it out on today. Please let > me know what you think? > > > > C.A.G. > > > -- > > *From: *"Bill Bulkeley" > *To: *legacy-ornamental-mills@googlegroups.com > *Sent: *Saturday, May 6, 2017 6:25:21 PM > *Subject: *RE: New design > > > > It sure is a different and unique pattern something defiantly to keep to > be used on future projects > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com [mailto: > legacy-ornamental-mills@googlegroups.com] *On Behalf Of *CURTIS GEORGE > *Sent:* Sunday, 7 May 2017 6:36 AM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: New design > > > > Hello Everyone > > Never give up! today's play time turned out something that I will be using > more in the future. ;-) > > > > Its time of the Happy Dance!!! > > > > C.A.G. > > > -- > > *From: *"CURTIS GEORGE" > *To: *legacy-ornamental-mills@googlegroups.com > *Sent: *Friday, May 5, 2017 9:50:09 AM > *Subject: *Re: New design > > > > Thank you. > > The idea is to get the most of of the Legacy, I started looking as some > other Ornamental turning equipment, trying to figure out different ways to > make something different, I found an Ornamental slide rest in one of my > Holtzappffel turning books. > > The concept of template following was made in the design of the Legacy, > but how could I get more from a template then just following a straight > line? > > Since Tim found the Atkinson"s reciprocating jig (which became the Wave > attachment) I figured that the two concepts were close enough to each-other > to be useful on the Legacy. > > I am still playing around with different shapes and sizes of templates. I > am finding the simpler template shapes work best, Oval,triangle,square, > hart shape ... work nicely, but more Ornamental (detailed patterns like a > rose lathe uses) dose not work well with this concept. > > Now what I am also looking at is , different types of cuts as well. > example cutting form the side vs the top. or cutting for off center vs on > center... > > I am planing to try an off center cut today, My theory is off center with > a cutter and a more quick changing template, should give me a pumping > action look (which is more an OT type of looking cut.) > > Wish me luck. and I will let you all know how it turns out. ;-) > > > > talk to you all more, latter. > > C.A.G. > > > -- > > *From: *"Ccm Ccm" > *To: *legacy-ornamental-mills@googlegroups.com > *Sent: *Friday, May 5, 2017 7:21:52 AM > *Subject: *Re: New design > > > > Looks nice, I like the idea > > > > On Thursday, May 4, 2017, CURTIS GEORGE wrote: > > > No problems there. ;-) > > I can go into more detail latter. All that I can say at this min. is > there are a lot of possibility out there . > > Im going to hit the hay now. > > talk to you more latter. > > > > Have a good night. > > C.A.G. > > > -- > > *From: *"Bill Bulkeley" > *To: *legacy-ornamental-mills@googlegroups.com > *Sent: *Thursday, May 4, 2017 1:38:59 AM > *Subject: *RE: New design > > > > Oops you already did i didn’t see till i enlarged the pics > > Nice > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com [mailto: > legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Bill Bulkeley > *Sent:* Thursday, 4 May 2017 3:36 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* RE: New design > > > > That’s great curt can you show the Rosetta that made that pattern > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com [mailto: > legacy-ornamental-mills@googlegroups.com] *On Behalf Of *CURTIS GEORGE > *Sent:* Thursday, 4 May 2017 3:23 PM &
Re: New design
Curt, that link that you are pointing to is from an author that is still alive. His name is John Edwards and the book is very enlightening. Please see his website for more information: http://www.ornamentalturning.co.uk/ Max, the sharing of copyrighted legacy material is not encouraged in any manner outside of this group. I have an agreement with Legacy that limit it's distribution. More details will be provided in the future. There is also an on going task of recovering lost information that is no longer available from Legacy. The exchange of money really has nothing to do with the legal sharing. -Tim From: "CURTIS GEORGE" To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, May 6, 2017 6:11:43 PM Subject: Re: New design http://www.ornamentalturning.info/FILES/01-Holtz%20Vol.VI%202nd%20Ed.%20Part%201-%20Chapter%20Intros.pdf this link has some neat ideas! C.A.G. - Original Message - From: "MAX LATHAM" To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, May 6, 2017 7:02:45 PM Subject: Re: New design A beautiful application ! I have "The Lathe" Holtzappffel and think it can be shared if no money changes hands. Likewise almost all the Legacy instructions can be shared via DVD, again without fund transfer? any one know for sure? max From: legacy-ornamental-mills@googlegroups.com on behalf of CURTIS GEORGE Sent: Saturday, May 6, 2017 5:55 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Hi Bill I agree here is the first thing, that I tried it out on today. Please let me know what you think? C.A.G. - Original Message - From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, May 6, 2017 6:25:21 PM Subject: RE: New design It sure is a different and unique pattern something defiantly to keep to be used on future projects Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Sunday, 7 May 2017 6:36 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Hello Everyone Never give up! today's play time turned out something that I will be using more in the future. ;-) Its time of the Happy Dance!!! C.A.G. - Original Message - From: "CURTIS GEORGE" To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 5, 2017 9:50:09 AM Subject: Re: New design Thank you. The idea is to get the most of of the Legacy, I started looking as some other Ornamental turning equipment, trying to figure out different ways to make something different, I found an Ornamental slide rest in one of my Holtzappffel turning books. The concept of template following was made in the design of the Legacy, but how could I get more from a template then just following a straight line? Since Tim found the Atkinson"s reciprocating jig (which became the Wave attachment) I figured that the two concepts were close enough to each-other to be useful on the Legacy. I am still playing around with different shapes and sizes of templates. I am finding the simpler template shapes work best, Oval,triangle,square, hart shape ... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) dose not work well with this concept. Now what I am also looking at is , different types of cuts as well. example cutting form the side vs the top. or cutting for off center vs on center... I am planing to try an off center cut today, My theory is off center with a cutter and a more quick changing template, should give me a pumping action look (which is more an OT type of looking cut.) Wish me luck. and I will let you all know how it turns out. ;-) talk to you all more, latter. C.A.G. - Original Message - From: "Ccm Ccm" To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 5, 2017 7:21:52 AM Subject: Re: New design Looks nice, I like the idea On Thursday, May 4, 2017, CURTIS GEORGE < curtgeo...@wowway.com > wrote: No problems there. ;-) I can go into more detail latter. All that I can say at this min. is there are a lot of possibility out there . Im going to hit the hay now. talk to you more latter. Have a good night. C.A.G. From: "Bill Bulkeley" < bulke...@mmnet.com.au > To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:38:59 AM Subject: RE: New design Oops you already did i didn’t see till i enlarged the pics Nice Bill From: legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com ] On Behalf Of Bill Bulkeley Sent: Thursday, 4 May 2017 3:36 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New design That’s great curt can you show the Rosetta that made th
Re: New design
I think so? but at this time I just have not figured out how to do it,yet. I was hoping that with a different router bit will make it more pronounced? (and that still might be... perhaps a smaller cutter?) Tomorrow I am going to try it with a side fluting cutter bit. If that doesn't work, I think its more the template/rosette that needs to be bigger. or perhaps a finer follower...? I wish that I knew? I am having fun, exploring new ideas, and different methods. All the I can say now is, Those OLD DUDES had some very real smarts...( the OT guys.) ;-) If a man could do in back in the late 1700's. Im sure that, with a little work, I should be able to at the very least understand how to get this done. ;-) I want to be fully honest with everyone here, I would like you all to help me. Im sure someone out there could, or perhaps as a part of a collective we could do some Really Cool stuff with our Legacy's At least that's part of my goal. Have a good night. C.A.G. - Original Message - From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, May 6, 2017 9:12:09 PM Subject: RE: New design It’s nice is it possible to get the pattern in the flute to stand out a little more? . I think that would really make it pop Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Sunday, 7 May 2017 8:55 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Hi Bill I agree here is the first thing, that I tried it out on today. Please let me know what you think? C.A.G. - Original Message - From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, May 6, 2017 6:25:21 PM Subject: RE: New design It sure is a different and unique pattern something defiantly to keep to be used on future projects Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Sunday, 7 May 2017 6:36 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Hello Everyone Never give up! today's play time turned out something that I will be using more in the future. ;-) Its time of the Happy Dance!!! C.A.G. From: "CURTIS GEORGE" To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 5, 2017 9:50:09 AM Subject: Re: New design Thank you. The idea is to get the most of of the Legacy, I started looking as some other Ornamental turning equipment, trying to figure out different ways to make something different, I found an Ornamental slide rest in one of my Holtzappffel turning books. The concept of template following was made in the design of the Legacy, but how could I get more from a template then just following a straight line? Since Tim found the Atkinson"s reciprocating jig (which became the Wave attachment) I figured that the two concepts were close enough to each-other to be useful on the Legacy. I am still playing around with different shapes and sizes of templates. I am finding the simpler template shapes work best, Oval,triangle,square, hart shape ... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) dose not work well with this concept. Now what I am also looking at is , different types of cuts as well. example cutting form the side vs the top. or cutting for off center vs on center... I am planing to try an off center cut today, My theory is off center with a cutter and a more quick changing template, should give me a pumping action look (which is more an OT type of looking cut.) Wish me luck. and I will let you all know how it turns out. ;-) talk to you all more, latter. C.A.G. From: "Ccm Ccm" To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 5, 2017 7:21:52 AM Subject: Re: New design Looks nice, I like the idea On Thursday, May 4, 2017, CURTIS GEORGE < curtgeo...@wowway.com > wrote: No problems there. ;-) I can go into more detail latter. All that I can say at this min. is there are a lot of possibility out there . Im going to hit the hay now. talk to you more latter. Have a good night. C.A.G. From: "Bill Bulkeley" < bulke...@mmnet.com.au > To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:38:59 AM Subject: RE: New design Oops you already did i didn’t see till i enlarged the pics Nice Bill From: legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com ] On Behalf Of Bill Bulkeley Sent: Thursday, 4 May 2017 3:36 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New design That’s great curt can you show the Rosetta that made that pattern
RE: New design
It’s nice is it possible to get the pattern in the flute to stand out a little more? . I think that would really make it pop Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Sunday, 7 May 2017 8:55 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Hi Bill I agree here is the first thing, that I tried it out on today. Please let me know what you think? C.A.G. _ From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, May 6, 2017 6:25:21 PM Subject: RE: New design It sure is a different and unique pattern something defiantly to keep to be used on future projects Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Sunday, 7 May 2017 6:36 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Hello Everyone Never give up! today's play time turned out something that I will be using more in the future. ;-) Its time of the Happy Dance!!! C.A.G. _ From: "CURTIS GEORGE" To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 5, 2017 9:50:09 AM Subject: Re: New design Thank you. The idea is to get the most of of the Legacy, I started looking as some other Ornamental turning equipment, trying to figure out different ways to make something different, I found an Ornamental slide rest in one of my Holtzappffel turning books. The concept of template following was made in the design of the Legacy, but how could I get more from a template then just following a straight line? Since Tim found the Atkinson"s reciprocating jig (which became the Wave attachment) I figured that the two concepts were close enough to each-other to be useful on the Legacy. I am still playing around with different shapes and sizes of templates. I am finding the simpler template shapes work best, Oval,triangle,square, hart shape ... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) dose not work well with this concept. Now what I am also looking at is , different types of cuts as well. example cutting form the side vs the top. or cutting for off center vs on center... I am planing to try an off center cut today, My theory is off center with a cutter and a more quick changing template, should give me a pumping action look (which is more an OT type of looking cut.) Wish me luck. and I will let you all know how it turns out. ;-) talk to you all more, latter. C.A.G. _ From: "Ccm Ccm" To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 5, 2017 7:21:52 AM Subject: Re: New design Looks nice, I like the idea On Thursday, May 4, 2017, CURTIS GEORGE wrote: No problems there. ;-) I can go into more detail latter. All that I can say at this min. is there are a lot of possibility out there . Im going to hit the hay now. talk to you more latter. Have a good night. C.A.G. _ From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:38:59 AM Subject: RE: New design Oops you already did i didn’t see till i enlarged the pics Nice Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Thursday, 4 May 2017 3:36 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New design That’s great curt can you show the Rosetta that made that pattern Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Thursday, 4 May 2017 3:23 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Just another one on the mill. C.A.G. _ From: "CURTIS GEORGE" To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:17:11 AM Subject: Re: New design HI Bill No but you are close. its my home made jig that I am calling the Rose Follower . I used a 1/8" bull nose bit. and as you can see in the photo, I am playing around with an oval shaped pattern at this time, Switching the pattern/book marking. is much easier to do with this jig. I just was looking for something a little different. so far the hart shape is my favorite. different patterns make different designs. more latter. C.A.G. _ From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 12:49:09 AM Subject: RE: New design Nice done with the wave attachment in left and right hand directions ? Or am I totally wrong, looks good I like it also what router bit? Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of C
Re: New design
http://www.ornamentalturning.info/FILES/01-Holtz%20Vol.VI%202nd%20Ed.%20Part%201-%20Chapter%20Intros.pdf this link has some neat ideas! C.A.G. - Original Message - From: "MAX LATHAM" To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, May 6, 2017 7:02:45 PM Subject: Re: New design A beautiful application ! I have "The Lathe" Holtzappffel and think it can be shared if no money changes hands. Likewise almost all the Legacy instructions can be shared via DVD, again without fund transfer? any one know for sure? max From: legacy-ornamental-mills@googlegroups.com on behalf of CURTIS GEORGE Sent: Saturday, May 6, 2017 5:55 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Hi Bill I agree here is the first thing, that I tried it out on today. Please let me know what you think? C.A.G. - Original Message - From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, May 6, 2017 6:25:21 PM Subject: RE: New design It sure is a different and unique pattern something defiantly to keep to be used on future projects Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Sunday, 7 May 2017 6:36 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Hello Everyone Never give up! today's play time turned out something that I will be using more in the future. ;-) Its time of the Happy Dance!!! C.A.G. - Original Message - From: "CURTIS GEORGE" To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 5, 2017 9:50:09 AM Subject: Re: New design Thank you. The idea is to get the most of of the Legacy, I started looking as some other Ornamental turning equipment, trying to figure out different ways to make something different, I found an Ornamental slide rest in one of my Holtzappffel turning books. The concept of template following was made in the design of the Legacy, but how could I get more from a template then just following a straight line? Since Tim found the Atkinson"s reciprocating jig (which became the Wave attachment) I figured that the two concepts were close enough to each-other to be useful on the Legacy. I am still playing around with different shapes and sizes of templates. I am finding the simpler template shapes work best, Oval,triangle,square, hart shape ... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) dose not work well with this concept. Now what I am also looking at is , different types of cuts as well. example cutting form the side vs the top. or cutting for off center vs on center... I am planing to try an off center cut today, My theory is off center with a cutter and a more quick changing template, should give me a pumping action look (which is more an OT type of looking cut.) Wish me luck. and I will let you all know how it turns out. ;-) talk to you all more, latter. C.A.G. - Original Message - From: "Ccm Ccm" To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 5, 2017 7:21:52 AM Subject: Re: New design Looks nice, I like the idea On Thursday, May 4, 2017, CURTIS GEORGE < curtgeo...@wowway.com > wrote: No problems there. ;-) I can go into more detail latter. All that I can say at this min. is there are a lot of possibility out there . Im going to hit the hay now. talk to you more latter. Have a good night. C.A.G. From: "Bill Bulkeley" < bulke...@mmnet.com.au > To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:38:59 AM Subject: RE: New design Oops you already did i didn’t see till i enlarged the pics Nice Bill From: legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com ] On Behalf Of Bill Bulkeley Sent: Thursday, 4 May 2017 3:36 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New design That’s great curt can you show the Rosetta that made that pattern Bill From: legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com ] On Behalf Of CURTIS GEORGE Sent: Thursday, 4 May 2017 3:23 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Just another one on the mill. C.A.G. From: "CURTIS GEORGE" < curtgeo...@wowway.com > To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:17:11 AM Subject: Re: New design HI Bill No but you are close. its my home made jig that I am calling the Rose Follower . I used a 1/8" bull nose bit. and as you can see in the photo, I am playing around with an oval shaped pattern at this time, Switching the pattern/book marking. is much easier to
Re: New design
A beautiful application ! I have "The Lathe" Holtzappffel and think it can be shared if no money changes hands. Likewise almost all the Legacy instructions can be shared via DVD, again without fund transfer? any one know for sure? max From: legacy-ornamental-mills@googlegroups.com on behalf of CURTIS GEORGE Sent: Saturday, May 6, 2017 5:55 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Hi Bill I agree here is the first thing, that I tried it out on today. Please let me know what you think? C.A.G. From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, May 6, 2017 6:25:21 PM Subject: RE: New design It sure is a different and unique pattern something defiantly to keep to be used on future projects Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Sunday, 7 May 2017 6:36 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Hello Everyone Never give up! today's play time turned out something that I will be using more in the future. ;-) Its time of the Happy Dance!!! C.A.G. From: "CURTIS GEORGE" To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 5, 2017 9:50:09 AM Subject: Re: New design Thank you. The idea is to get the most of of the Legacy, I started looking as some other Ornamental turning equipment, trying to figure out different ways to make something different, I found an Ornamental slide rest in one of my Holtzappffel turning books. The concept of template following was made in the design of the Legacy, but how could I get more from a template then just following a straight line? Since Tim found the Atkinson"s reciprocating jig (which became the Wave attachment) I figured that the two concepts were close enough to each-other to be useful on the Legacy. I am still playing around with different shapes and sizes of templates. I am finding the simpler template shapes work best, Oval,triangle,square, hart shape ... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) dose not work well with this concept. Now what I am also looking at is , different types of cuts as well. example cutting form the side vs the top. or cutting for off center vs on center... I am planing to try an off center cut today, My theory is off center with a cutter and a more quick changing template, should give me a pumping action look (which is more an OT type of looking cut.) Wish me luck. and I will let you all know how it turns out. ;-) talk to you all more, latter. C.A.G. From: "Ccm Ccm" To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 5, 2017 7:21:52 AM Subject: Re: New design Looks nice, I like the idea On Thursday, May 4, 2017, CURTIS GEORGE mailto:curtgeo...@wowway.com>> wrote: No problems there. ;-) I can go into more detail latter. All that I can say at this min. is there are a lot of possibility out there . Im going to hit the hay now. talk to you more latter. Have a good night. C.A.G. From: "Bill Bulkeley" > To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:38:59 AM Subject: RE: New design Oops you already did i didn’t see till i enlarged the pics Nice Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Thursday, 4 May 2017 3:36 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New design That’s great curt can you show the Rosetta that made that pattern Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Thursday, 4 May 2017 3:23 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Just another one on the mill. C.A.G. From: "CURTIS GEORGE" > To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:17:11 AM Subject: Re: New design HI Bill No but you are close. its my home made jig that I am calling the Rose Follower . I used a 1/8" bull nose bit. and as you can see in the photo, I am playing around with an oval shaped pattern at this time, Switching the pattern/book marking. is much easier to do with this jig. I just was looking for something a little different. so far the hart shape is my favorite. different patterns make different designs. more latter. C.A.G. From: "Bill Bulkeley" > To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 12:49:09 AM Subject: RE: New design Nice done with the wave attachment in left and right hand directions ? Or am
RE: New design
It sure is a different and unique pattern something defiantly to keep to be used on future projects Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Sunday, 7 May 2017 6:36 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Hello Everyone Never give up! today's play time turned out something that I will be using more in the future. ;-) Its time of the Happy Dance!!! C.A.G. _ From: "CURTIS GEORGE" To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 5, 2017 9:50:09 AM Subject: Re: New design Thank you. The idea is to get the most of of the Legacy, I started looking as some other Ornamental turning equipment, trying to figure out different ways to make something different, I found an Ornamental slide rest in one of my Holtzappffel turning books. The concept of template following was made in the design of the Legacy, but how could I get more from a template then just following a straight line? Since Tim found the Atkinson"s reciprocating jig (which became the Wave attachment) I figured that the two concepts were close enough to each-other to be useful on the Legacy. I am still playing around with different shapes and sizes of templates. I am finding the simpler template shapes work best, Oval,triangle,square, hart shape ... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) dose not work well with this concept. Now what I am also looking at is , different types of cuts as well. example cutting form the side vs the top. or cutting for off center vs on center... I am planing to try an off center cut today, My theory is off center with a cutter and a more quick changing template, should give me a pumping action look (which is more an OT type of looking cut.) Wish me luck. and I will let you all know how it turns out. ;-) talk to you all more, latter. C.A.G. _ From: "Ccm Ccm" To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 5, 2017 7:21:52 AM Subject: Re: New design Looks nice, I like the idea On Thursday, May 4, 2017, CURTIS GEORGE wrote: No problems there. ;-) I can go into more detail latter. All that I can say at this min. is there are a lot of possibility out there . Im going to hit the hay now. talk to you more latter. Have a good night. C.A.G. _ From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:38:59 AM Subject: RE: New design Oops you already did i didn’t see till i enlarged the pics Nice Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Thursday, 4 May 2017 3:36 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New design That’s great curt can you show the Rosetta that made that pattern Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Thursday, 4 May 2017 3:23 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Just another one on the mill. C.A.G. _ From: "CURTIS GEORGE" To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:17:11 AM Subject: Re: New design HI Bill No but you are close. its my home made jig that I am calling the Rose Follower . I used a 1/8" bull nose bit. and as you can see in the photo, I am playing around with an oval shaped pattern at this time, Switching the pattern/book marking. is much easier to do with this jig. I just was looking for something a little different. so far the hart shape is my favorite. different patterns make different designs. more latter. C.A.G. _ From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 12:49:09 AM Subject: RE: New design Nice done with the wave attachment in left and right hand directions ? Or am I totally wrong, looks good I like it also what router bit? Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Thursday, 4 May 2017 2:30 PM To: Legacy-Ornamental-Mills Subject: New design Just wanted to know what you all think? This is just a test piece, I think it will become a pencil holder??? I just wanted to try something new. Any and All input is as always welcome! ;-) C.A.G. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com -- You received this message becau
Re: New design
Hello everyone. I just got home form work. today's Legacy experiments did not work out as expected... But I did learn something new. (so I guess it was not a failure.) ;-) I hope everyone has a Great Weekend. talk to you all more tomorrow. Good night. C.A.G. - Original Message - From: "CURTIS GEORGE" To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 5, 2017 9:50:09 AM Subject: Re: New design Thank you. The idea is to get the most of of the Legacy, I started looking as some other Ornamental turning equipment, trying to figure out different ways to make something different, I found an Ornamental slide rest in one of my Holtzappffel turning books. The concept of template following was made in the design of the Legacy, but how could I get more from a template then just following a straight line? Since Tim found the Atkinson"s reciprocating jig (which became the Wave attachment) I figured that the two concepts were close enough to each-other to be useful on the Legacy. I am still playing around with different shapes and sizes of templates. I am finding the simpler template shapes work best, Oval,triangle,square, hart shape ... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) dose not work well with this concept. Now what I am also looking at is , different types of cuts as well. example cutting form the side vs the top. or cutting for off center vs on center... I am planing to try an off center cut today, My theory is off center with a cutter and a more quick changing template, should give me a pumping action look (which is more an OT type of looking cut.) Wish me luck. and I will let you all know how it turns out. ;-) talk to you all more, latter. C.A.G. - Original Message - From: "Ccm Ccm" To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 5, 2017 7:21:52 AM Subject: Re: New design Looks nice, I like the idea On Thursday, May 4, 2017, CURTIS GEORGE < curtgeo...@wowway.com > wrote: No problems there. ;-) I can go into more detail latter. All that I can say at this min. is there are a lot of possibility out there . Im going to hit the hay now. talk to you more latter. Have a good night. C.A.G. From: "Bill Bulkeley" < bulke...@mmnet.com.au > To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:38:59 AM Subject: RE: New design Oops you already did i didn’t see till i enlarged the pics Nice Bill From: legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com ] On Behalf Of Bill Bulkeley Sent: Thursday, 4 May 2017 3:36 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New design That’s great curt can you show the Rosetta that made that pattern Bill From: legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com ] On Behalf Of CURTIS GEORGE Sent: Thursday, 4 May 2017 3:23 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Just another one on the mill. C.A.G. From: "CURTIS GEORGE" < curtgeo...@wowway.com > To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:17:11 AM Subject: Re: New design HI Bill No but you are close. its my home made jig that I am calling the Rose Follower . I used a 1/8" bull nose bit. and as you can see in the photo, I am playing around with an oval shaped pattern at this time, Switching the pattern/book marking. is much easier to do with this jig. I just was looking for something a little different. so far the hart shape is my favorite. different patterns make different designs. more latter. C.A.G. From: "Bill Bulkeley" < bulke...@mmnet.com.au > To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 12:49:09 AM Subject: RE: New design Nice done with the wave attachment in left and right hand directions ? Or am I totally wrong, looks good I like it also what router bit? Bill From: legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com ] On Behalf Of CURTIS GEORGE Sent: Thursday, 4 May 2017 2:30 PM To: Legacy-Ornamental-Mills Subject: New design Just wanted to know what you all think? This is just a test piece, I think it will become a pencil holder??? I just wanted to try something new. Any and All input is as always welcome! ;-) C.A.G. Virus-free. www.avg.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at https://groups.goo
Re: New design
Thank you. The idea is to get the most of of the Legacy, I started looking as some other Ornamental turning equipment, trying to figure out different ways to make something different, I found an Ornamental slide rest in one of my Holtzappffel turning books. The concept of template following was made in the design of the Legacy, but how could I get more from a template then just following a straight line? Since Tim found the Atkinson"s reciprocating jig (which became the Wave attachment) I figured that the two concepts were close enough to each-other to be useful on the Legacy. I am still playing around with different shapes and sizes of templates. I am finding the simpler template shapes work best, Oval,triangle,square, hart shape ... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) dose not work well with this concept. Now what I am also looking at is , different types of cuts as well. example cutting form the side vs the top. or cutting for off center vs on center... I am planing to try an off center cut today, My theory is off center with a cutter and a more quick changing template, should give me a pumping action look (which is more an OT type of looking cut.) Wish me luck. and I will let you all know how it turns out. ;-) talk to you all more, latter. C.A.G. - Original Message - From: "Ccm Ccm" To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 5, 2017 7:21:52 AM Subject: Re: New design Looks nice, I like the idea On Thursday, May 4, 2017, CURTIS GEORGE < curtgeo...@wowway.com > wrote: No problems there. ;-) I can go into more detail latter. All that I can say at this min. is there are a lot of possibility out there . Im going to hit the hay now. talk to you more latter. Have a good night. C.A.G. From: "Bill Bulkeley" < bulke...@mmnet.com.au > To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:38:59 AM Subject: RE: New design Oops you already did i didn’t see till i enlarged the pics Nice Bill From: legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com ] On Behalf Of Bill Bulkeley Sent: Thursday, 4 May 2017 3:36 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New design That’s great curt can you show the Rosetta that made that pattern Bill From: legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com ] On Behalf Of CURTIS GEORGE Sent: Thursday, 4 May 2017 3:23 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Just another one on the mill. C.A.G. From: "CURTIS GEORGE" < curtgeo...@wowway.com > To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:17:11 AM Subject: Re: New design HI Bill No but you are close. its my home made jig that I am calling the Rose Follower . I used a 1/8" bull nose bit. and as you can see in the photo, I am playing around with an oval shaped pattern at this time, Switching the pattern/book marking. is much easier to do with this jig. I just was looking for something a little different. so far the hart shape is my favorite. different patterns make different designs. more latter. C.A.G. From: "Bill Bulkeley" < bulke...@mmnet.com.au > To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 12:49:09 AM Subject: RE: New design Nice done with the wave attachment in left and right hand directions ? Or am I totally wrong, looks good I like it also what router bit? Bill From: legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com ] On Behalf Of CURTIS GEORGE Sent: Thursday, 4 May 2017 2:30 PM To: Legacy-Ornamental-Mills Subject: New design Just wanted to know what you all think? This is just a test piece, I think it will become a pencil holder??? I just wanted to try something new. Any and All input is as always welcome! ;-) C.A.G. Virus-free. www.avg.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at https://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.
Re: New design
Looks nice, I like the idea On Thursday, May 4, 2017, CURTIS GEORGE wrote: > No problems there. ;-) > I can go into more detail latter. All that I can say at this min. is > there are a lot of possibility out there . > Im going to hit the hay now. > talk to you more latter. > > Have a good night. > C.A.G. > > -- > *From: *"Bill Bulkeley" > > *To: *legacy-ornamental-mills@googlegroups.com > > *Sent: *Thursday, May 4, 2017 1:38:59 AM > *Subject: *RE: New design > > Oops you already did i didn’t see till i enlarged the pics > > Nice > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com > > [mailto:legacy-ornamental-mills@googlegroups.com > ] > *On Behalf Of *Bill Bulkeley > *Sent:* Thursday, 4 May 2017 3:36 PM > *To:* legacy-ornamental-mills@googlegroups.com > > *Subject:* RE: New design > > > > That’s great curt can you show the Rosetta that made that pattern > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com > > [mailto:legacy-ornamental-mills@googlegroups.com > ] > *On Behalf Of *CURTIS GEORGE > *Sent:* Thursday, 4 May 2017 3:23 PM > *To:* legacy-ornamental-mills@googlegroups.com > > *Subject:* Re: New design > > > > Just another one on the mill. > > C.A.G. > > > -- > > *From: *"CURTIS GEORGE" > > *To: *legacy-ornamental-mills@googlegroups.com > > *Sent: *Thursday, May 4, 2017 1:17:11 AM > *Subject: *Re: New design > > > > > > HI Bill > > No but you are close. its my home made jig that I am calling the Rose > Follower . I used a 1/8" bull nose bit. and as you can see in the photo, I > am playing around with an oval shaped pattern at this time, Switching the > pattern/book marking. is much easier to do with this jig. > > I just was looking for something a little different. so far the hart > shape is my favorite. different patterns make different designs. > > > > more latter. > > C.A.G. > -- > > *From: *"Bill Bulkeley" > > *To: *legacy-ornamental-mills@googlegroups.com > > *Sent: *Thursday, May 4, 2017 12:49:09 AM > *Subject: *RE: New design > > > > Nice done with the wave attachment in left and right hand directions ? > > Or am I totally wrong, looks good I like it also what router bit? > > > > Bill > > > > > > *From:* legacy-ornamental-mills@googlegroups.com > > [mailto:legacy-ornamental-mills@googlegroups.com > ] > *On Behalf Of *CURTIS GEORGE > *Sent:* Thursday, 4 May 2017 2:30 PM > *To:* Legacy-Ornamental-Mills > *Subject:* New design > > > > Just wanted to know what you all think? > > This is just a test piece, I think it will become a pencil holder??? I > just wanted to try something new. > > Any and All input is as always welcome! ;-) > > > > C.A.G. > > > > > <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > > Virus-free. www.avg.com > <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com > > . > To post to this group, send email to legacy-ornamental-mills@ > googlegroups.com > > . > Visit this group at https://groups.google.com/ > group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com > > . > To post to this group, send email to legacy-ornamental-mills@ > googlegroups.com > > . > Visit this group at https://groups.google.com/ > group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com > > . > To post to this group, send email to legacy-orna
Re: New design
No problems there. ;-) I can go into more detail latter. All that I can say at this min. is there are a lot of possibility out there . Im going to hit the hay now. talk to you more latter. Have a good night. C.A.G. - Original Message - From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:38:59 AM Subject: RE: New design Oops you already did i didn’t see till i enlarged the pics Nice Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Thursday, 4 May 2017 3:36 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New design That’s great curt can you show the Rosetta that made that pattern Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Thursday, 4 May 2017 3:23 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Just another one on the mill. C.A.G. From: "CURTIS GEORGE" To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:17:11 AM Subject: Re: New design HI Bill No but you are close. its my home made jig that I am calling the Rose Follower . I used a 1/8" bull nose bit. and as you can see in the photo, I am playing around with an oval shaped pattern at this time, Switching the pattern/book marking. is much easier to do with this jig. I just was looking for something a little different. so far the hart shape is my favorite. different patterns make different designs. more latter. C.A.G. From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 12:49:09 AM Subject: RE: New design Nice done with the wave attachment in left and right hand directions ? Or am I totally wrong, looks good I like it also what router bit? Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Thursday, 4 May 2017 2:30 PM To: Legacy-Ornamental-Mills Subject: New design Just wanted to know what you all think? This is just a test piece, I think it will become a pencil holder??? I just wanted to try something new. Any and All input is as always welcome! ;-) C.A.G. Virus-free. www.avg.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at https://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at https://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at https://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at https://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at https://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups
RE: New design
Oops you already did i didn’t see till i enlarged the pics Nice Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Thursday, 4 May 2017 3:36 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New design That’s great curt can you show the Rosetta that made that pattern Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Thursday, 4 May 2017 3:23 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Just another one on the mill. C.A.G. _ From: "CURTIS GEORGE" To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:17:11 AM Subject: Re: New design HI Bill No but you are close. its my home made jig that I am calling the Rose Follower . I used a 1/8" bull nose bit. and as you can see in the photo, I am playing around with an oval shaped pattern at this time, Switching the pattern/book marking. is much easier to do with this jig. I just was looking for something a little different. so far the hart shape is my favorite. different patterns make different designs. more latter. C.A.G. _ From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 12:49:09 AM Subject: RE: New design Nice done with the wave attachment in left and right hand directions ? Or am I totally wrong, looks good I like it also what router bit? Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Thursday, 4 May 2017 2:30 PM To: Legacy-Ornamental-Mills Subject: New design Just wanted to know what you all think? This is just a test piece, I think it will become a pencil holder??? I just wanted to try something new. Any and All input is as always welcome! ;-) C.A.G. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this
RE: New design
That’s great curt can you show the Rosetta that made that pattern Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Thursday, 4 May 2017 3:23 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New design Just another one on the mill. C.A.G. _ From: "CURTIS GEORGE" To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 1:17:11 AM Subject: Re: New design HI Bill No but you are close. its my home made jig that I am calling the Rose Follower . I used a 1/8" bull nose bit. and as you can see in the photo, I am playing around with an oval shaped pattern at this time, Switching the pattern/book marking. is much easier to do with this jig. I just was looking for something a little different. so far the hart shape is my favorite. different patterns make different designs. more latter. C.A.G. _ From: "Bill Bulkeley" To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, May 4, 2017 12:49:09 AM Subject: RE: New design Nice done with the wave attachment in left and right hand directions ? Or am I totally wrong, looks good I like it also what router bit? Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Thursday, 4 May 2017 2:30 PM To: Legacy-Ornamental-Mills Subject: New design Just wanted to know what you all think? This is just a test piece, I think it will become a pencil holder??? I just wanted to try something new. Any and All input is as always welcome! ;-) C.A.G. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: New design
Nice done with the wave attachment in left and right hand directions ? Or am I totally wrong, looks good I like it also what router bit? Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Thursday, 4 May 2017 2:30 PM To: Legacy-Ornamental-Mills Subject: New design Just wanted to know what you all think? This is just a test piece, I think it will become a pencil holder??? I just wanted to try something new. Any and All input is as always welcome! ;-) C.A.G. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.