Re: 2 Morse Taper

2019-08-05 Thread Ryan Jurgens 
The pictures brought back memories of my machine shop days. I ran a 120"
VTM, a 5" Horizontal mill, 10' tracer lath, and a host of othe machines. At
the Rexnord/Nordberg plant where I worked they had a 26' VTM. Always loved
seeing the massive parts being machined on that HUGE machine. Then I went
into welding, and that was my most fun job!

On Mon, Aug 5, 2019, 1:22 PM  wrote:

> Mac I would too but that was many years ago and I lost  any photos in the
> house fire but here is a similar one about the same size you can get the
> idea also shavings from a cut and here is a video of a little one turned on
> https://www.youtube.com/watch?v=lmsP-1GMjz8
>
>
>
> And also some pictures of lake hume water valves with one of the 4 working
> I made them its not the biggest I made but definitely up there
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *MWF
> *Sent:* Tuesday, 6 August 2019 1:38 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: 2 Morse Taper
>
>
>
> Hi Bill,
>
> Since Curtis is on vacation, and will not see your email for another week
> or two, I'll go ahead and respond for him:
>
> "We would all LOVE to see photos of that machine."
>
> (Curtis always asks for photos.  I, for one, appreciate him asking for
> them - and folks providing them.)
>
> Thanks - we look forward to seeing photos of the vertical boring machine.
> I realize that was so long ago that the photos may be of the "tintype"
> variety - but they will be better than none. ;-)
>
> Mac
> --
> ----------
>
>
>
> -Original Message-
> From: bulke...@mmnet.com.au
> Sent: Aug 5, 2019 1:18 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: 2 Morse Taper
>
>
> My biggest machine was a vertical borer it had a 26ft chuck, among jobs I
> machined was big valves off some of our biggest lakes operating the machine
> one story off the ground watching all that mass revolving around below you,
> it did feel like controlling the world you could drive a truck through the
> middle of it ,man that was so long ago now I couldn’t even clime up on the
> machine to work it lolol it sure sux to get old.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Krause
> *Sent:* Monday, 5 August 2019 2:15 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* RE: 2 Morse Taper
>
>
>
> So off topic, but my favorite is an old Clausing lathe and an old no brand
> T-lathe off of a battle ship! That monster could swing around 4 or 5 feet
> diameter. Scariest machine I ran but you felt like you controlled the word!
>
> Back to the legacy topics please.
>
> On Aug 4, 2019, at 4:10 AM, bulke...@mmnet.com.au wrote:
>
> VDF lathe I remember them really good lathe I worked on one making pump
> shafts and impellers for a while in my engineering days
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Richard Ellis
> *Sent:* Sunday, 4 August 2019 7:24 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Re: 2 Morse Taper
>
>
>
> Thanks Tim
>
> I have the single locking collar for the chuck, have tried that with the
> chuck and all is o.k. I am well aware of morse tapers having bought and
> sold quite a few metal working lathes. The best one of all of them was a
> VDF German made lathe See http://www.lathes.co.uk/
>
> Cheers
>
> Richard
>
> On Sunday, August 4, 2019 at 6:11:43 AM UTC+1, Tim wrote:
>
> No one mentioned to NOT hammer it in like you would a lathe.  In fact I
> would  recommend  that you take it out frequently.   You remove the knob
> from the end of the spindle and use the 1/4" Allen wrench to tap it out.
>
> If you don't follow this advice, you will find the drive gets stuck inside
> the socket and heavier means are necessary.
>
> If you really don't take this advice, the two metals will become one and
> they are seriously not for woodworkers to attempt getting them apart!
>
> So some of this was said tongue in check, but the double locking collar is
> the definitive way to go.  Last I checked, legacy still had then in stock.
> They are just two locking collars welded together. One has a smooth 1" bore
> that tightens on the drive an the other collar I threaded 1-8 that tightens
> on the spindle
>
> If you choose to use a chuck or a face plate you will need a smooth bore
> split collar to make the accessories turn true

RE: 2 Morse Taper

2019-08-05 Thread MWF 
Hi Bill,Since Curtis is on vacation, and will not see your email for another week or two, I'll go ahead and respond for him:"We would all LOVE to see photos of that machine." (Curtis always asks for photos.  I, for one, appreciate him asking for them - and folks providing them.)Thanks - we look forward to seeing photos of the vertical boring machine.  I realize that was so long ago that the photos may be of the "tintype" variety - but they will be better than none. ;-)Mac-Original Message-
From: bulke...@mmnet.com.au
Sent: Aug 5, 2019 1:18 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: 2 Morse Taper

My biggest machine was a vertical borer it had a 26ft chuck, among jobs I machined was big valves off some of our biggest lakes operating the machine one story off the ground watching all that mass revolving around below you, it did feel like controlling the world you could drive a truck through the middle of it ,man that was so long ago now I couldn’t even clime up on the machine to work it lolol it sure sux to get old. Bill From: legacy-ornamental-mills@googlegroups.com  On Behalf Of Tim KrauseSent: Monday, 5 August 2019 2:15 PMTo: Legacy Ornamental Mills Subject: RE: 2 Morse Taper So off topic, but my favorite is an old Clausing lathe and an old no brand T-lathe off of a battle ship! That monster could swing around 4 or 5 feet diameter. Scariest machine I ran but you felt like you controlled the word!Back to the legacy topics please.On Aug 4, 2019, at 4:10 AM, bulke...@mmnet.com.au wrote:VDF lathe I remember them really good lathe I worked on one making pump shafts and impellers for a while in my engineering days   Bill   From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Richard EllisSent: Sunday, 4 August 2019 7:24 PMTo: Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com>Subject: Re: 2 Morse Taper   Thanks Tim I have the single locking collar for the chuck, have tried that with the chuck and all is o.k. I am well aware of morse tapers having bought and sold quite a few metal working lathes. The best one of all of them was a VDF German made lathe See http://www.lathes.co.uk/ Cheers RichardOn Sunday, August 4, 2019 at 6:11:43 AM UTC+1, Tim wrote: No one mentioned to NOT hammer it in like you would a lathe.  In fact I would  recommend  that you take it out frequently.   You remove the knob from the end of the spindle and use the 1/4" Allen wrench to tap it out.  If you don't follow this advice, you will find the drive gets stuck inside the socket and heavier means are necessary. If you really don't take this advice, the two metals will become one and they are seriously not for woodworkers to attempt getting them apart! So some of this was said tongue in check, but the double locking collar is the definitive way to go.  Last I checked, legacy still had then in stock.  They are just two locking collars welded together. One has a smooth 1" bore that tightens on the drive an the other collar I threaded 1-8 that tightens on the spindle If you choose to use a chuck or a face plate you will need a smooth bore split collar to make the accessories turn true. Hope that helps On Aug 3, 2019, at 2:41 AM, Richard Ellis <rchrd...@gmail.com> wrote: I have just put together my shortened 900 However I am not to impressed with the head stock 2 morse. Will there be a chance of it slipping if the tailstock dead center loosens and the pressure on the 2 morse eases . Do I need to locktite it or pin it somehow ?? Richard -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/dc917fc2-cadb-4270-ab4f-4fb17d815674%40googlegroups.com.  Virus-free. www.avast.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/01d54ab5%24240c75b0%246c256110%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/85f87775-022f-4012-b426-3644c85b8056%40comcast.net.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe fro

RE: 2 Morse Taper

2019-08-04 Thread bulkeley 
My biggest machine was a vertical borer it had a 26ft chuck, among jobs I 
machined was big valves off some of our biggest lakes operating the machine one 
story off the ground watching all that mass revolving around below you, it did 
feel like controlling the world you could drive a truck through the middle of 
it ,man that was so long ago now I couldn’t even clime up on the machine to 
work it lolol it sure sux to get old.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Krause
Sent: Monday, 5 August 2019 2:15 PM
To: Legacy Ornamental Mills 
Subject: RE: 2 Morse Taper

 

So off topic, but my favorite is an old Clausing lathe and an old no brand 
T-lathe off of a battle ship! That monster could swing around 4 or 5 feet 
diameter. Scariest machine I ran but you felt like you controlled the word!

Back to the legacy topics please.

On Aug 4, 2019, at 4:10 AM, bulke...@mmnet.com.au 
<mailto:bulke...@mmnet.com.au>  wrote:

VDF lathe I remember them really good lathe I worked on one making pump shafts 
and impellers for a while in my engineering days 

  

Bill 

  

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Richard Ellis
Sent: Sunday, 4 August 2019 7:24 PM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: 2 Morse Taper 

  

Thanks Tim 

I have the single locking collar for the chuck, have tried that with the chuck 
and all is o.k. I am well aware of morse tapers having bought and sold quite a 
few metal working lathes. The best one of all of them was a VDF German made 
lathe See http://www.lathes.co.uk/ 

Cheers 

Richard

On Sunday, August 4, 2019 at 6:11:43 AM UTC+1, Tim wrote: 

No one mentioned to NOT hammer it in like you would a lathe.  In fact I would  
recommend  that you take it out frequently.   You remove the knob from the end 
of the spindle and use the 1/4" Allen wrench to tap it out.  

If you don't follow this advice, you will find the drive gets stuck inside the 
socket and heavier means are necessary. 

If you really don't take this advice, the two metals will become one and they 
are seriously not for woodworkers to attempt getting them apart! 

So some of this was said tongue in check, but the double locking collar is the 
definitive way to go.  Last I checked, legacy still had then in stock.  They 
are just two locking collars welded together. One has a smooth 1" bore that 
tightens on the drive an the other collar I threaded 1-8 that tightens on the 
spindle 

If you choose to use a chuck or a face plate you will need a smooth bore split 
collar to make the accessories turn true. 

Hope that helps 

On Aug 3, 2019, at 2:41 AM, Richard Ellis  > 
wrote: 

I have just put together my shortened 900 However I am not to impressed with 
the head stock 2 morse. Will there be a chance of it slipping if the tailstock 
dead center loosens and the pressure on the 2 morse eases . Do I need to 
locktite it or pin it somehow ?? 

Richard 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/dc917fc2-cadb-4270-ab4f-4fb17d815674%40googlegroups.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/dc917fc2-cadb-4270-ab4f-4fb17d815674%40googlegroups.com?utm_medium=email_source=footer>
 . 

 


 
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group. 
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . 
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d54ab5%24240c75b0%246c256110%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/01d54ab5%24240c75b0%246c256110%24%40mmnet.com.au?utm_medium=email_source=footer>
 . 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.

RE: 2 Morse Taper

2019-08-04 Thread Tim Krause 
So off topic, but my favorite is an old Clausing lathe and an old no brand 
T-lathe off of a battle ship! That monster could swing around 4 or 5 feet 
diameter. Scariest machine I ran but you felt like you controlled the word!

Back to the legacy topics please.

On Aug 4, 2019, 4:10 AM, at 4:10 AM, bulke...@mmnet.com.au wrote:
>VDF lathe I remember them really good lathe I worked on one making pump
>shafts and impellers for a while in my engineering days 
>
> 
>
>Bill
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
> On Behalf Of Richard Ellis
>Sent: Sunday, 4 August 2019 7:24 PM
>To: Legacy Ornamental Mills 
>Subject: Re: 2 Morse Taper
>
> 
>
>Thanks Tim
>
>I have the single locking collar for the chuck, have tried that with
>the chuck and all is o.k. I am well aware of morse tapers having bought
>and sold quite a few metal working lathes. The best one of all of them
>was a VDF German made lathe See http://www.lathes.co.uk/
>
>Cheers
>
>Richard
>
>On Sunday, August 4, 2019 at 6:11:43 AM UTC+1, Tim wrote:
>
>No one mentioned to NOT hammer it in like you would a lathe.  In fact I
>would  recommend  that you take it out frequently.   You remove the
>knob from the end of the spindle and use the 1/4" Allen wrench to tap
>it out.  
>
>If you don't follow this advice, you will find the drive gets stuck
>inside the socket and heavier means are necessary. 
>
>If you really don't take this advice, the two metals will become one
>and they are seriously not for woodworkers to attempt getting them
>apart!
>
>So some of this was said tongue in check, but the double locking collar
>is the definitive way to go.  Last I checked, legacy still had then in
>stock.  They are just two locking collars welded together. One has a
>smooth 1" bore that tightens on the drive an the other collar I
>threaded 1-8 that tightens on the spindle
>
>If you choose to use a chuck or a face plate you will need a smooth
>bore split collar to make the accessories turn true.
>
>Hope that helps
>
>On Aug 3, 2019, at 2:41 AM, Richard Ellis  > wrote:
>
>I have just put together my shortened 900 However I am not to impressed
>with the head stock 2 morse. Will there be a chance of it slipping if
>the tailstock dead center loosens and the pressure on the 2 morse eases
>. Do I need to locktite it or pin it somehow ??
>
>Richard
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com
><mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/dc917fc2-cadb-4270-ab4f-4fb17d815674%40googlegroups.com
><https://groups.google.com/d/msgid/legacy-ornamental-mills/dc917fc2-cadb-4270-ab4f-4fb17d815674%40googlegroups.com?utm_medium=email_source=footer>
>.
>
>
>
>---
>This email has been checked for viruses by Avast antivirus software.
>https://www.avast.com/antivirus
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/01d54ab5%24240c75b0%246c256110%24%40mmnet.com.au.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/85f87775-022f-4012-b426-3644c85b8056%40comcast.net.

RE: 2 Morse Taper

2019-08-04 Thread bulkeley 
VDF lathe I remember them really good lathe I worked on one making pump shafts 
and impellers for a while in my engineering days 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Richard Ellis
Sent: Sunday, 4 August 2019 7:24 PM
To: Legacy Ornamental Mills 
Subject: Re: 2 Morse Taper

 

Thanks Tim

I have the single locking collar for the chuck, have tried that with the chuck 
and all is o.k. I am well aware of morse tapers having bought and sold quite a 
few metal working lathes. The best one of all of them was a VDF German made 
lathe See http://www.lathes.co.uk/

Cheers

Richard

On Sunday, August 4, 2019 at 6:11:43 AM UTC+1, Tim wrote:

No one mentioned to NOT hammer it in like you would a lathe.  In fact I would  
recommend  that you take it out frequently.   You remove the knob from the end 
of the spindle and use the 1/4" Allen wrench to tap it out.  

If you don't follow this advice, you will find the drive gets stuck inside the 
socket and heavier means are necessary. 

If you really don't take this advice, the two metals will become one and they 
are seriously not for woodworkers to attempt getting them apart!

So some of this was said tongue in check, but the double locking collar is the 
definitive way to go.  Last I checked, legacy still had then in stock.  They 
are just two locking collars welded together. One has a smooth 1" bore that 
tightens on the drive an the other collar I threaded 1-8 that tightens on the 
spindle

If you choose to use a chuck or a face plate you will need a smooth bore split 
collar to make the accessories turn true.

Hope that helps

On Aug 3, 2019, at 2:41 AM, Richard Ellis  > 
wrote:

I have just put together my shortened 900 However I am not to impressed with 
the head stock 2 morse. Will there be a chance of it slipping if the tailstock 
dead center loosens and the pressure on the 2 morse eases . Do I need to 
locktite it or pin it somehow ??

Richard

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/dc917fc2-cadb-4270-ab4f-4fb17d815674%40googlegroups.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/dc917fc2-cadb-4270-ab4f-4fb17d815674%40googlegroups.com?utm_medium=email_source=footer>
 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d54ab5%24240c75b0%246c256110%24%40mmnet.com.au.

Re: 2 Morse Taper

2019-08-04 Thread Richard Ellis 
Hi Bill
Having reached the age of 84, and the good Wife thought it would be a good 
idea if we moved closer to the Daughters Great and great Grand.
We bought a small house near them. Not much room for all my lathes milling 
machine welders etc etc etc. So had to dispose of it, gave most of it to a 
younger chap who used to work for me in the Forestrry contacting job.
It feels like a big mistake now to have got rid of it all /!!??
I will send you an email about the two lathes Revo &900 a little later when 
I have cooled down, ( Not just the weather )
Richard

On Saturday, August 3, 2019 at 11:36:43 PM UTC+1, aussiman wrote:
>
> Ps Richard as for the morse slipping I’m sure you can make your own double 
> locking collar knowing you can work a metal lathe quite well
>
>  
>
> Bill
>
>  
>
> *From:* legacy-orna...@googlegroups.com  <
> legacy-orna...@googlegroups.com > *On Behalf Of *
> bulk...@mmnet.com.au 
> *Sent:* Sunday, 4 August 2019 8:29 AM
> *To:* legacy-orna...@googlegroups.com 
> *Subject:* RE: 2 Morse Taper
>
>  
>
> Go this way
>
> Bill
>
> *From:* legacy-orna...@googlegroups.com  <
> legacy-orna...@googlegroups.com > *On Behalf Of *Richard 
> Ellis
> *Sent:* Sunday, 4 August 2019 1:24 AM
> *To:* Legacy Ornamental Mills  >
> *Subject:* Re: 2 Morse Taper
>
>  
>
> Hi Bill
>
> I know I only bought the 900 for the leadscrew and rails, but it is in a 
> bit of a state. It has a single locking collar with the male morse with 
> drive dog welded on and nothing else.Lots of other things that have 
> been put together wrongly. even the stick-on label on the headstock is back 
> to front !!! Not that I need it.
>
> The stops on the leadscrew don't fit my Revo leadscrew just to loose. I 
> will swap them with the Revo ones that has the 900 leadscrew --I 
> just hope they fit 
>
> On Saturday, August 3, 2019 at 1:20:00 PM UTC+1, aussiman wrote:
>
> That’s what the double locking collar is for[image: Double Locking Collar] 
> screws on to the headstock and locks on to what ever is in the morse taper
>
>  
>
> Bill
>
>  
>
> *From:* legacy-orna...@googlegroups.com  *On 
> Behalf Of *Richard Ellis
> *Sent:* Saturday, 3 August 2019 7:41 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* 2 Morse Taper
>
>  
>
> I have just put together my shortened 900 However I am not to impressed 
> with the head stock 2 morse. Will there be a chance of it slipping if the 
> tailstock dead center loosens and the pressure on the 2 morse eases . Do I 
> need to locktite it or pin it somehow ??
>
> Richard
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/358d7bda-fa12-4371-a526-7b4fd6aeeb1e%40googlegroups.com
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/358d7bda-fa12-4371-a526-7b4fd6aeeb1e%40googlegroups.com?utm_medium=email_source=footer>
> .
>
>  
>
>
> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
> Virus-free. www.avast.com 
> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>  
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/0e9ccd33-111f-48fd-a466-4d0e6f8a71c9%40googlegroups.com
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/0e9ccd33-111f-48fd-a466-4d0e6f8a71c9%40googlegroups.com?utm_medium=email_source=footer>
> .
>
>  
>
>
> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
> Virus-free. www.avast.com 
> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>  
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legac

Re: 2 Morse Taper

2019-08-04 Thread Richard Ellis 
Thanks Tim
I have the single locking collar for the chuck, have tried that with the 
chuck and all is o.k. I am well aware of morse tapers having bought and 
sold quite a few metal working lathes. The best one of all of them was a 
VDF German made lathe See http://www.lathes.co.uk/
Cheers
Richard

On Sunday, August 4, 2019 at 6:11:43 AM UTC+1, Tim wrote:
>
> No one mentioned to NOT hammer it in like you would a lathe.  In fact I 
> would  recommend  that you take it out frequently.   You remove the knob 
> from the end of the spindle and use the 1/4" Allen wrench to tap it out.  
>
> If you don't follow this advice, you will find the drive gets stuck inside 
> the socket and heavier means are necessary. 
>
> If you really don't take this advice, the two metals will become one and 
> they are seriously not for woodworkers to attempt getting them apart!
>
> So some of this was said tongue in check, but the double locking collar is 
> the definitive way to go.  Last I checked, legacy still had then in stock.  
> They are just two locking collars welded together. One has a smooth 1" bore 
> that tightens on the drive an the other collar I threaded 1-8 that tightens 
> on the spindle
>
> If you choose to use a chuck or a face plate you will need a smooth bore 
> split collar to make the accessories turn true.
>
> Hope that helps
> On Aug 3, 2019, at 2:41 AM, Richard Ellis  > wrote:
>>
>> I have just put together my shortened 900 However I am not to impressed 
>> with the head stock 2 morse. Will there be a chance of it slipping if the 
>> tailstock dead center loosens and the pressure on the 2 morse eases . Do I 
>> need to locktite it or pin it somehow ??
>> Richard
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/dc917fc2-cadb-4270-ab4f-4fb17d815674%40googlegroups.com.

Re: 2 Morse Taper

2019-08-03 Thread Tim Krause 
No one mentioned to NOT hammer it in like you would a lathe.  In fact I would  
recommend  that you take it out frequently.   You remove the knob from the end 
of the spindle and use the 1/4" Allen wrench to tap it out.  

If you don't follow this advice, you will find the drive gets stuck inside the 
socket and heavier means are necessary. 

If you really don't take this advice, the two metals will become one and they 
are seriously not for woodworkers to attempt getting them apart!

So some of this was said tongue in check, but the double locking collar is the 
definitive way to go.  Last I checked, legacy still had then in stock.  They 
are just two locking collars welded together. One has a smooth 1" bore that 
tightens on the drive an the other collar I threaded 1-8 that tightens on the 
spindle

If you choose to use a chuck or a face plate you will need a smooth bore split 
collar to make the accessories turn true.

Hope that helps


On Aug 3, 2019, 2:41 AM, at 2:41 AM, Richard Ellis  
wrote:
>I have just put together my shortened 900 However I am not to impressed
>
>with the head stock 2 morse. Will there be a chance of it slipping if
>the 
>tailstock dead center loosens and the pressure on the 2 morse eases .
>Do I 
>need to locktite it or pin it somehow ??
>Richard
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/358d7bda-fa12-4371-a526-7b4fd6aeeb1e%40googlegroups.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/4e149861-e6f6-45a6-8e08-1609855b98ed%40comcast.net.

RE: 2 Morse Taper

2019-08-03 Thread bulkeley 
Ps Richard as for the morse slipping I’m sure you can make your own double 
locking collar knowing you can work a metal lathe quite well

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Sunday, 4 August 2019 8:29 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: 2 Morse Taper

 

Go this way

Bill

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Richard Ellis
Sent: Sunday, 4 August 2019 1:24 AM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: 2 Morse Taper

 

Hi Bill

I know I only bought the 900 for the leadscrew and rails, but it is in a bit of 
a state. It has a single locking collar with the male morse with drive dog 
welded on and nothing else.Lots of other things that have been put together 
wrongly. even the stick-on label on the headstock is back to front !!! Not that 
I need it.

The stops on the leadscrew don't fit my Revo leadscrew just to loose. I will 
swap them with the Revo ones that has the 900 leadscrew --I just hope 
they fit 

On Saturday, August 3, 2019 at 1:20:00 PM UTC+1, aussiman wrote:

That’s what the double locking collar is for  
<https://groups.google.com/group/legacy-ornamental-mills/attach/cc40f5fae0be6/image001.jpg?part=0.1=0>
 screws on to the headstock and locks on to what ever is in the morse taper

 

Bill

 

From: legacy-orna...@googlegroups.com   
 > On Behalf Of Richard Ellis
Sent: Saturday, 3 August 2019 7:41 PM
To: Legacy Ornamental Mills  >
Subject: 2 Morse Taper

 

I have just put together my shortened 900 However I am not to impressed with 
the head stock 2 morse. Will there be a chance of it slipping if the tailstock 
dead center loosens and the pressure on the 2 morse eases . Do I need to 
locktite it or pin it somehow ??

Richard

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com  .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/358d7bda-fa12-4371-a526-7b4fd6aeeb1e%40googlegroups.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/358d7bda-fa12-4371-a526-7b4fd6aeeb1e%40googlegroups.com?utm_medium=email_source=footer>
 .

 


 
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/0e9ccd33-111f-48fd-a466-4d0e6f8a71c9%40googlegroups.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/0e9ccd33-111f-48fd-a466-4d0e6f8a71c9%40googlegroups.com?utm_medium=email_source=footer>
 .

 


 
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d54a4a%24eaa8bd20%24bffa3760%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/01d54a4a%24eaa8bd20%24bffa3760%24%40mmnet.com.au?utm_medium=email_source=footer>
 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d54a4b%24e55dccb0%24b0196610%24%40mmnet.com.au.

Re: 2 Morse Taper

2019-08-03 Thread Richard Ellis 
Hi Ray
Pop over and see I do know about Metal working lathes !!
Richard

On Saturday, August 3, 2019 at 4:18:17 PM UTC+1, Brafield Bodger wrote:
>
> What make you think the 2MT will slip - they don't on a lathe which has 
> much high rotational forces placed on it then a 900.
>
> On Saturday, 3 August 2019 10:41:11 UTC+1, Richard Ellis wrote:
>>
>> I have just put together my shortened 900 However I am not to impressed 
>> with the head stock 2 morse. Will there be a chance of it slipping if the 
>> tailstock dead center loosens and the pressure on the 2 morse eases . Do I 
>> need to locktite it or pin it somehow ??
>> Richard
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/db725361-5572-48d1-89e2-d46f563de016%40googlegroups.com.

Re: 2 Morse Taper

2019-08-03 Thread Richard Ellis 
Hi Bill
I know I only bought the 900 for the leadscrew and rails, but it is in a 
bit of a state. It has a single locking collar with the male morse with 
drive dog welded on and nothing else.Lots of other things that have 
been put together wrongly. even the stick-on label on the headstock is back 
to front !!! Not that I need it.
The stops on the leadscrew don't fit my Revo leadscrew just to loose. I 
will swap them with the Revo ones that has the 900 leadscrew --I 
just hope they fit 

On Saturday, August 3, 2019 at 1:20:00 PM UTC+1, aussiman wrote:
>
> That’s what the double locking collar is for[image: Double Locking Collar] 
> screws on to the headstock and locks on to what ever is in the morse taper
>
>  
>
> Bill
>
>  
>
> *From:* legacy-orna...@googlegroups.com  <
> legacy-orna...@googlegroups.com > *On Behalf Of *Richard 
> Ellis
> *Sent:* Saturday, 3 August 2019 7:41 PM
> *To:* Legacy Ornamental Mills  >
> *Subject:* 2 Morse Taper
>
>  
>
> I have just put together my shortened 900 However I am not to impressed 
> with the head stock 2 morse. Will there be a chance of it slipping if the 
> tailstock dead center loosens and the pressure on the 2 morse eases . Do I 
> need to locktite it or pin it somehow ??
>
> Richard
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/358d7bda-fa12-4371-a526-7b4fd6aeeb1e%40googlegroups.com
>  
> 
> .
>
>
> 
>  Virus-free. 
> www.avast.com 
> 
>  
> <#000b01d549f5$bedf2d50$3c9d87f0$@mmnet.com.au_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/0e9ccd33-111f-48fd-a466-4d0e6f8a71c9%40googlegroups.com.

Re: 2 Morse Taper

2019-08-03 Thread Brafield Bodger 
What make you think the 2MT will slip - they don't on a lathe which has 
much high rotational forces placed on it then a 900.

On Saturday, 3 August 2019 10:41:11 UTC+1, Richard Ellis wrote:
>
> I have just put together my shortened 900 However I am not to impressed 
> with the head stock 2 morse. Will there be a chance of it slipping if the 
> tailstock dead center loosens and the pressure on the 2 morse eases . Do I 
> need to locktite it or pin it somehow ??
> Richard
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/04a2f0c0-3073-435c-b95c-4fdcaaeda3d2%40googlegroups.com.

RE: 2 Morse Taper

2019-08-03 Thread bulkeley 
That’s what the double locking collar is for screws on to the headstock and 
locks on to what ever is in the morse taper

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Richard Ellis
Sent: Saturday, 3 August 2019 7:41 PM
To: Legacy Ornamental Mills 
Subject: 2 Morse Taper

 

I have just put together my shortened 900 However I am not to impressed with 
the head stock 2 morse. Will there be a chance of it slipping if the tailstock 
dead center loosens and the pressure on the 2 morse eases . Do I need to 
locktite it or pin it somehow ??

Richard

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/358d7bda-fa12-4371-a526-7b4fd6aeeb1e%40googlegroups.com
 

 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000b01d549f5%24bedf2d50%243c9d87f0%24%40mmnet.com.au.