Re: Brand new LOM 200 for sale

2019-08-01 Thread MWF 
That photo sheds a different light on the idea/meaning of "LOM".Appears to be one with fairly precise control of the cutter.Mac-Original Message-
From: 4 Jim Carpenter 
Sent: Aug 1, 2019 2:02 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Brand new LOM 200 for sale

Along the lines of small - LOM - This one and two others are available. Used to make and repair pool cue's. All Jim's - 62226 zipMetro St. Louis, Mo.On Wed, Jul 31, 2019 at 7:31 PM Tim Krause <artmarb...@comcast.net> wrote:You have two choices, 1- 1/2" and something close to .039".  You just need to swap the gears.  Could wrong, on the smaller number, I don't that information near me.  
A pen is made with a 1/2" roping bit and you would do a three start twist ( pitch / router bit dia = number of starts ).
The smaller pitch is used with a cove bit to make your stock round.  It's not the best finish. The flat bit has an okay finish, but it needs to be offset like our big machine. You can only run the bit down the centers.
Tim
On Jul 31, 2019, at 4:21 PM, bulke...@mmnet.com.au wrote:
Not sure how many pitch options those 200s have I would have to look the only one I know is ½ inch Bill From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Tim ZieglerSent: Thursday, 1 August 2019 9:08 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Brand new LOM 200 for sale Lets get those pix back up to the front of this post and look again?Along with the link etc...Curtis did state he really wanted one of these. If He decides after his trip he's going to pass on it I may consider it too for small stuff, or a new Toy. Tool lolSo in the mean time lets cycle it back up to the front here?Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Wed, Jul 31, 2019 at 8:58 AM Tracy Smith <trlsmit...@gmail.com> wrote:No problem at all.  My offer stand for anyone in the group that may be interested in that LOM 200.  I can see that it is still available. This group is great for answering questions and sharing insights so it's the least I can do. Have a great Wednesday. TracyOn Sat, Jul 27, 2019 at 8:49 PM MWF <mwfos...@earthlink.net> wrote:Tracy,That is a VERY Kind offer.The world needs more folks that think like you did.Mac-Original Message- From: Tracy Smith Sent: Jul 27, 2019 8:06 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Brand new LOM 200 for sale Curt, I talked to the guy a couple of times.  I know he will come down in price.  If you need any help picking it up and shipping, I'll be glad to help. TracyOn Fri, Jul 26, 2019 at 10:14 PM 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote:Hello  I have wanted a 200 for quite a while now.You are right Bill vertical template follower. The machine is limited, but it to offers some very real possibility's I will check on it tomorrow.  If I miss this one, then I just might go out and make my own unit? With Linear rail selling for a more reasonable prices today.  Making my own unit is starting to sound more like a very real possibility..With my Dream machine, I would go longer, and give the carriage a Y movement, (the 200 only cuts on the center line of the spindle.) I would also like to figure out a way to tilt the Z axis so to cut face-plate type of work... ;-) Well I did say my Dream machine... ;-pI have to run... Have a good night. C.A.G. On Friday, July 26, 2019, 09:49:17 PM EDT, <bulke...@mmnet.com.au> wrote:  The legacy 200 a great mill for pen makers and small work if I remember it has a vertical template follower BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Tracy SmithSent: Saturday, 27 July 2019 4:34 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Brand new LOM 200 for sale Hello all, Someone in my area is selling a never used LOW 200.  The machine is still in the original packaging.  It includes a router.  After looking into it, it is too small for me to make use of. Here is the link to his online ad in case anyone is interested: https://classifieds.ksl.com/listing/56802557. Tracy



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1708103923.8668.1564704218313%40wamui-berry.atl.sa.earthlink.net.

RE: Brand new LOM 200 for sale

2019-07-31 Thread Tim Krause 
You have two choices, 1- 1/2" and something close to .039".  You just need to 
swap the gears.  Could wrong, on the smaller number, I don't that information 
near me.  

A pen is made with a 1/2" roping bit and you would do a three start twist ( 
pitch / router bit dia = number of starts ).

The smaller pitch is used with a cove bit to make your stock round.  It's not 
the best finish. The flat bit has an okay finish, but it needs to be offset 
like our big machine. You can only run the bit down the centers.

Tim




On Jul 31, 2019, 4:21 PM, at 4:21 PM, bulke...@mmnet.com.au wrote:
>Not sure how many pitch options those 200s have I would have to look
>the only one I know is ½ inch
>
> 
>
>Bill
>
> 
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
> On Behalf Of Tim Ziegler
>Sent: Thursday, 1 August 2019 9:08 AM
>To: legacy-ornamental-mills@googlegroups.com
>Subject: Re: Brand new LOM 200 for sale
>
> 
>
>Lets get those pix back up to the front of this post and look again?
>
>Along with the link etc...
>
>Curtis did state he really wanted one of these. 
>
>If He decides after his trip he's going to pass on it I may consider it
>too for small stuff, or a new Toy. Tool lol
>
>So in the mean time lets cycle it back up to the front here?
>
>
>Kind Regards,
>
> 
>
>Timothy J. Ziegler
>
>Ziegler WoodWork & Specialty
>
>14171 160th Ave.
>
>Foreston MN 56330
>
> 
>
>320-294-5798 shop
>
>320-630-2243 cell
>
> 
>
> 
>
>On Wed, Jul 31, 2019 at 8:58 AM Tracy Smith <mailto:trlsmit...@gmail.com> > wrote:
>
>No problem at all.  My offer stand for anyone in the group that may be
>interested in that LOM 200.  I can see that it is still available.
>
> 
>
>This group is great for answering questions and sharing insights so
>it's the least I can do.
>
> 
>
>Have a great Wednesday.
>
> 
>
>Tracy
>
> 
>
>On Sat, Jul 27, 2019 at 8:49 PM MWF <mailto:mwfos...@earthlink.net> > wrote:
>
>Tracy,
>
>That is a VERY Kind offer.
>
>The world needs more folks that think like you did.
>
>Mac
>
>
>  _  
>
>
>  _  
>
>
>-Original Message- 
>From: Tracy Smith 
>Sent: Jul 27, 2019 8:06 PM 
>To: legacy-ornamental-mills@googlegroups.com
><mailto:legacy-ornamental-mills@googlegroups.com>  
>Subject: Re: Brand new LOM 200 for sale 
>
>Curt,
>
> 
>
>I talked to the guy a couple of times.  I know he will come down in
>price.  If you need any help picking it up and shipping, I'll be glad
>to help.
>
> 
>
>Tracy
>
> 
>
>On Fri, Jul 26, 2019 at 10:14 PM 'Curt George' via Legacy Ornamental
>Mills <mailto:legacy-ornamental-mills@googlegroups.com> > wrote:
>
>Hello 
>
> 
>
>I have wanted a 200 for quite a while now.
>
>You are right Bill vertical template follower. The machine is limited,
>but it to offers some very real possibility's
>
> 
>
>I will check on it tomorrow. 
>
> 
>
>If I miss this one, then I just might go out and make my own unit? With
>Linear rail selling for a more reasonable prices today.  Making my own
>unit is starting to sound more like a very real possibility..
>
>With my Dream machine, I would go longer, and give the carriage a Y
>movement, (the 200 only cuts on the center line of the spindle.) I
>would also like to figure out a way to tilt the Z axis so to cut
>face-plate type of work... ;-)
>
> 
>
>Well I did say my Dream machine... ;-p
>
>I have to run... Have a good night.
>
> 
>
>C.A.G.
>
> 
>
>On Friday, July 26, 2019, 09:49:17 PM EDT, <mailto:bulke...@mmnet.com.au> > wrote: 
>
> 
>
> 
>
>The legacy 200 a great mill for pen makers and small work if I remember
>it has a vertical template follower
>
> 
>
>Bill
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
><mailto:legacy-ornamental-mills@googlegroups.com> 
><mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tracy
>Smith
>Sent: Saturday, 27 July 2019 4:34 AM
>To: legacy-ornamental-mills@googlegroups.com
><mailto:legacy-ornamental-mills@googlegroups.com> 
>Subject: Brand new LOM 200 for sale
>
> 
>
>Hello all,
>
> 
>
>Someone in my area is selling a never used LOW 200.  The machine is
>still in the original packaging.  It includes a router.  After looking
>into it, it is too small for me to make use of.
>
> 
>
>Here is the link to his online ad in case anyone is interested:
>https://classifieds.ksl.com/listing/56802557.
>
> 
>
>Tracy
>
>-- 
>You received this message beca

RE: Brand new LOM 200 for sale

2019-07-31 Thread bulkeley 
Not sure how many pitch options those 200s have I would have to look the only 
one I know is ½ inch

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Thursday, 1 August 2019 9:08 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Brand new LOM 200 for sale

 

Lets get those pix back up to the front of this post and look again?

Along with the link etc...

Curtis did state he really wanted one of these. 

If He decides after his trip he's going to pass on it I may consider it too for 
small stuff, or a new Toy. Tool lol

So in the mean time lets cycle it back up to the front here?


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Jul 31, 2019 at 8:58 AM Tracy Smith mailto:trlsmit...@gmail.com> > wrote:

No problem at all.  My offer stand for anyone in the group that may be 
interested in that LOM 200.  I can see that it is still available.

 

This group is great for answering questions and sharing insights so it's the 
least I can do.

 

Have a great Wednesday.

 

Tracy

 

On Sat, Jul 27, 2019 at 8:49 PM MWF mailto:mwfos...@earthlink.net> > wrote:

Tracy,

That is a VERY Kind offer.

The world needs more folks that think like you did.

Mac


  _  


  _  


-Original Message- 
From: Tracy Smith 
Sent: Jul 27, 2019 8:06 PM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: Re: Brand new LOM 200 for sale 

Curt,

 

I talked to the guy a couple of times.  I know he will come down in price.  If 
you need any help picking it up and shipping, I'll be glad to help.

 

Tracy

 

On Fri, Jul 26, 2019 at 10:14 PM 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

Hello 

 

I have wanted a 200 for quite a while now.

You are right Bill vertical template follower. The machine is limited, but it 
to offers some very real possibility's

 

I will check on it tomorrow. 

 

If I miss this one, then I just might go out and make my own unit? With Linear 
rail selling for a more reasonable prices today.  Making my own unit is 
starting to sound more like a very real possibility..

With my Dream machine, I would go longer, and give the carriage a Y movement, 
(the 200 only cuts on the center line of the spindle.) I would also like to 
figure out a way to tilt the Z axis so to cut face-plate type of work... ;-)

 

Well I did say my Dream machine... ;-p

I have to run... Have a good night.

 

C.A.G.

 

On Friday, July 26, 2019, 09:49:17 PM EDT, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

The legacy 200 a great mill for pen makers and small work if I remember it has 
a vertical template follower

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tracy Smith
Sent: Saturday, 27 July 2019 4:34 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Brand new LOM 200 for sale

 

Hello all,

 

Someone in my area is selling a never used LOW 200.  The machine is still in 
the original packaging.  It includes a router.  After looking into it, it is 
too small for me to make use of.

 

Here is the link to his online ad in case anyone is interested: 
https://classifieds.ksl.com/listing/56802557.

 

Tracy

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1379590078.8610.1564282149076%40wamui-agami.atl.sa.earthlink.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1379590078.8610.1564282149076%40wamui-agami.atl.sa.earthlink.net?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPnmKgDBDNg%2ByCjLCmZc9eyqMh2S3Sm0iW0LpNdfmtj7Wr7qSQ%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPnmKgDBDNg%2ByCjLCmZc9eyqMh2S3Sm0iW0LpNdfmtj7Wr7qSQ%40mail.gmail.com?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"L

Re: Brand new LOM 200 for sale

2019-07-31 Thread Tim Ziegler 
Lets get those pix back up to the front of this post and look again?
Along with the link etc...
Curtis did state he really wanted one of these.
If He decides after his trip he's going to pass on it I may consider it too
for small stuff, or a new Toy. Tool lol
So in the mean time lets cycle it back up to the front here?
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Jul 31, 2019 at 8:58 AM Tracy Smith  wrote:

> No problem at all.  My offer stand for anyone in the group that may be
> interested in that LOM 200.  I can see that it is still available.
>
> This group is great for answering questions and sharing insights so it's
> the least I can do.
>
> Have a great Wednesday.
>
> Tracy
>
> On Sat, Jul 27, 2019 at 8:49 PM MWF  wrote:
>
>> Tracy,
>> That is a VERY Kind offer.
>> The world needs more folks that think like you did.
>> Mac
>> --
>> --
>>
>> -Original Message-
>> From: Tracy Smith
>> Sent: Jul 27, 2019 8:06 PM
>> To: legacy-ornamental-mills@googlegroups.com
>> Subject: Re: Brand new LOM 200 for sale
>>
>> Curt,
>>
>> I talked to the guy a couple of times.  I know he will come down in
>> price.  If you need any help picking it up and shipping, I'll be glad to
>> help.
>>
>> Tracy
>>
>> On Fri, Jul 26, 2019 at 10:14 PM 'Curt George' via Legacy Ornamental
>> Mills  wrote:
>>
>>> Hello
>>>
>>> I have wanted a 200 for quite a while now.
>>> You are right Bill vertical template follower. The machine is limited,
>>> but it to offers some very real possibility's
>>>
>>> I will check on it tomorrow.
>>>
>>> If I miss this one, then I just might go out and make my own unit? With
>>> Linear rail selling for a more reasonable prices today.  Making my own unit
>>> is starting to sound more like a very real possibility..
>>> With my Dream machine, I would go longer, and give the carriage a Y
>>> movement, (the 200 only cuts on the center line of the spindle.) I would
>>> also like to figure out a way to tilt the Z axis so to cut face-plate type
>>> of work... ;-)
>>>
>>> Well I did say my Dream machine... ;-p
>>> I have to run... Have a good night.
>>>
>>> C.A.G.
>>>
>>> On Friday, July 26, 2019, 09:49:17 PM EDT, 
>>> wrote:
>>>
>>>
>>> The legacy 200 a great mill for pen makers and small work if I remember
>>> it has a vertical template follower
>>>
>>>
>>>
>>> Bill
>>>
>>>
>>>
>>> *From:* legacy-ornamental-mills@googlegroups.com <
>>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tracy Smith
>>> *Sent:* Saturday, 27 July 2019 4:34 AM
>>> *To:* legacy-ornamental-mills@googlegroups.com
>>> *Subject:* Brand new LOM 200 for sale
>>>
>>>
>>>
>>> Hello all,
>>>
>>>
>>>
>>> Someone in my area is selling a never used LOW 200.  The machine is
>>> still in the original packaging.  It includes a router.  After looking into
>>> it, it is too small for me to make use of.
>>>
>>>
>>>
>>> Here is the link to his online ad in case anyone is interested:
>>> https://classifieds.ksl.com/listing/56802557.
>>>
>>>
>>>
>>> Tracy
>>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/1379590078.8610.1564282149076%40wamui-agami.atl.sa.earthlink.net
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1379590078.8610.1564282149076%40wamui-agami.atl.sa.earthlink.net?utm_medium=email_source=footer>
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPnmKgDBDNg%2ByCjLCmZc9eyqMh2S3Sm0iW0LpNdfmtj7Wr7qSQ%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPnmKgDBDNg%2ByCjLCmZc9eyqMh2S3Sm0iW0LpNdfmtj7Wr7qSQ%40mail.gmail.com?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLE4KGSd5HNcHRaq4ZPPH3KmE60M%2B_hPFQUVsyoGJ6-HoQ%40mail.gmail.com.

Re: Brand new LOM 200 for sale

2019-07-31 Thread Tracy Smith 
No problem at all.  My offer stand for anyone in the group that may be
interested in that LOM 200.  I can see that it is still available.

This group is great for answering questions and sharing insights so it's
the least I can do.

Have a great Wednesday.

Tracy

On Sat, Jul 27, 2019 at 8:49 PM MWF  wrote:

> Tracy,
> That is a VERY Kind offer.
> The world needs more folks that think like you did.
> Mac
> --
> --
>
> -Original Message-
> From: Tracy Smith
> Sent: Jul 27, 2019 8:06 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Brand new LOM 200 for sale
>
> Curt,
>
> I talked to the guy a couple of times.  I know he will come down in
> price.  If you need any help picking it up and shipping, I'll be glad to
> help.
>
> Tracy
>
> On Fri, Jul 26, 2019 at 10:14 PM 'Curt George' via Legacy Ornamental Mills
>  wrote:
>
>> Hello
>>
>> I have wanted a 200 for quite a while now.
>> You are right Bill vertical template follower. The machine is limited,
>> but it to offers some very real possibility's
>>
>> I will check on it tomorrow.
>>
>> If I miss this one, then I just might go out and make my own unit? With
>> Linear rail selling for a more reasonable prices today.  Making my own unit
>> is starting to sound more like a very real possibility..
>> With my Dream machine, I would go longer, and give the carriage a Y
>> movement, (the 200 only cuts on the center line of the spindle.) I would
>> also like to figure out a way to tilt the Z axis so to cut face-plate type
>> of work... ;-)
>>
>> Well I did say my Dream machine... ;-p
>> I have to run... Have a good night.
>>
>> C.A.G.
>>
>> On Friday, July 26, 2019, 09:49:17 PM EDT, 
>> wrote:
>>
>>
>> The legacy 200 a great mill for pen makers and small work if I remember
>> it has a vertical template follower
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tracy Smith
>> *Sent:* Saturday, 27 July 2019 4:34 AM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Brand new LOM 200 for sale
>>
>>
>>
>> Hello all,
>>
>>
>>
>> Someone in my area is selling a never used LOW 200.  The machine is still
>> in the original packaging.  It includes a router.  After looking into it,
>> it is too small for me to make use of.
>>
>>
>>
>> Here is the link to his online ad in case anyone is interested:
>> https://classifieds.ksl.com/listing/56802557.
>>
>>
>>
>> Tracy
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1379590078.8610.1564282149076%40wamui-agami.atl.sa.earthlink.net
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1379590078.8610.1564282149076%40wamui-agami.atl.sa.earthlink.net?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPnmKgDBDNg%2ByCjLCmZc9eyqMh2S3Sm0iW0LpNdfmtj7Wr7qSQ%40mail.gmail.com.

Re: Brand new LOM 200 for sale

2019-07-27 Thread MWF 
Tracy,That is a VERY Kind offer.The world needs more folks that think like you did.Mac-Original Message-
From: Tracy Smith 
Sent: Jul 27, 2019 8:06 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Brand new LOM 200 for sale

Curt,I talked to the guy a couple of times.  I know he will come down in price.  If you need any help picking it up and shipping, I'll be glad to help.TracyOn Fri, Jul 26, 2019 at 10:14 PM 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote:
Hello I have wanted a 200 for quite a while now.You are right Bill vertical template follower. The machine is limited, but it to offers some very real possibility'sI will check on it tomorrow. If I miss this one, then I just might go out and make my own unit? With Linear rail selling for a more reasonable prices today.  Making my own unit is starting to sound more like a very real possibility..With my Dream machine, I would go longer, and give the carriage a Y movement, (the 200 only cuts on the center line of the spindle.) I would also like to figure out a way to tilt the Z axis so to cut face-plate type of work... ;-)Well I did say my Dream machine... ;-pI have to run... Have a good night.C.A.G.





On Friday, July 26, 2019, 09:49:17 PM EDT,  <bulke...@mmnet.com.au> wrote:



The legacy 200 a great mill for pen makers and small work if I remember it has a vertical template follower  Bill  From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Tracy SmithSent: Saturday, 27 July 2019 4:34 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Brand new LOM 200 for sale  Hello all,  Someone in my area is selling a never used LOW 200.  The machine is still in the original packaging.  It includes a router.  After looking into it, it is too small for me to make use of.  Here is the link to his online ad in case anyone is interested: https://classifieds.ksl.com/listing/56802557.  Tracy



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1379590078.8610.1564282149076%40wamui-agami.atl.sa.earthlink.net.

Re: Brand new LOM 200 for sale

2019-07-27 Thread Tracy Smith 
Curt,

I talked to the guy a couple of times.  I know he will come down in price.
If you need any help picking it up and shipping, I'll be glad to help.

Tracy

On Fri, Jul 26, 2019 at 10:14 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hello
>
> I have wanted a 200 for quite a while now.
> You are right Bill vertical template follower. The machine is limited, but
> it to offers some very real possibility's
>
> I will check on it tomorrow.
>
> If I miss this one, then I just might go out and make my own unit? With
> Linear rail selling for a more reasonable prices today.  Making my own unit
> is starting to sound more like a very real possibility..
> With my Dream machine, I would go longer, and give the carriage a Y
> movement, (the 200 only cuts on the center line of the spindle.) I would
> also like to figure out a way to tilt the Z axis so to cut face-plate type
> of work... ;-)
>
> Well I did say my Dream machine... ;-p
> I have to run... Have a good night.
>
> C.A.G.
>
> On Friday, July 26, 2019, 09:49:17 PM EDT,  wrote:
>
>
> The legacy 200 a great mill for pen makers and small work if I remember it
> has a vertical template follower
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tracy Smith
> *Sent:* Saturday, 27 July 2019 4:34 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Brand new LOM 200 for sale
>
>
>
> Hello all,
>
>
>
> Someone in my area is selling a never used LOW 200.  The machine is still
> in the original packaging.  It includes a router.  After looking into it,
> it is too small for me to make use of.
>
>
>
> Here is the link to his online ad in case anyone is interested:
> https://classifieds.ksl.com/listing/56802557.
>
>
>
> Tracy
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPnmKgBRjXoX1n_f2yqstwsPgn2-TLaVqodbs_nNGNoiDpuxtQ%40mail.gmail.com
> 
> .
>
>
> 
>  Virus-free.
> www.avast.com
> 
> <#m_703450908599351551_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001501d5441d%247bf74280%2473e5c780%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/539330565.1139451.1564200884074%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPnmKgDYc-3fuaF_zah3ebBRtFSHzfSTfnCK03wd-O9CJB56tg%40mail.gmail.com.

RE: Brand new LOM 200 for sale

2019-07-27 Thread Tim Krause 
Steve Jacob's has one.  

On Jul 26, 2019, 10:00 PM, at 10:00 PM, bulke...@mmnet.com.au wrote:
>Good luck curt I hope you get it. I think Tim K is the only other
>member with one isn’t he?
>
> 
>
>Bill
>
> 
>
>From: 'Curt George' via Legacy Ornamental Mills
> 
>Sent: Saturday, 27 July 2019 2:15 PM
>To: legacy-ornamental-mills@googlegroups.com
>Subject: Re: Brand new LOM 200 for sale
>
> 
>
>Hello 
>
> 
>
>I have wanted a 200 for quite a while now.
>
>You are right Bill vertical template follower. The machine is limited,
>but it to offers some very real possibility's
>
> 
>
>I will check on it tomorrow. 
>
> 
>
>If I miss this one, then I just might go out and make my own unit? With
>Linear rail selling for a more reasonable prices today.  Making my own
>unit is starting to sound more like a very real possibility..
>
>With my Dream machine, I would go longer, and give the carriage a Y
>movement, (the 200 only cuts on the center line of the spindle.) I
>would also like to figure out a way to tilt the Z axis so to cut
>face-plate type of work... ;-)
>
> 
>
>Well I did say my Dream machine... ;-p
>
>I have to run... Have a good night.
>
> 
>
>C.A.G.
>
> 
>
>On Friday, July 26, 2019, 09:49:17 PM EDT, <mailto:bulke...@mmnet.com.au> > wrote: 
>
> 
>
> 
>
>The legacy 200 a great mill for pen makers and small work if I remember
>it has a vertical template follower
>
> 
>
>Bill
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
><mailto:legacy-ornamental-mills@googlegroups.com> 
><mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tracy
>Smith
>Sent: Saturday, 27 July 2019 4:34 AM
>To: legacy-ornamental-mills@googlegroups.com
><mailto:legacy-ornamental-mills@googlegroups.com> 
>Subject: Brand new LOM 200 for sale
>
> 
>
>Hello all,
>
> 
>
>Someone in my area is selling a never used LOW 200.  The machine is
>still in the original packaging.  It includes a router.  After looking
>into it, it is too small for me to make use of.
>
> 
>
>Here is the link to his online ad in case anyone is interested:
>https://classifieds.ksl.com/listing/56802557.
>
> 
>
>Tracy
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com
><mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPnmKgBRjXoX1n_f2yqstwsPgn2-TLaVqodbs_nNGNoiDpuxtQ%40mail.gmail.com
><https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPnmKgBRjXoX1n_f2yqstwsPgn2-TLaVqodbs_nNGNoiDpuxtQ%40mail.gmail.com?utm_medium=email_source=footer>
>.
>
> 
>
>
><https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
>
>Virus-free. 
><https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>www.avast.com 
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com
><mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/001501d5441d%247bf74280%2473e5c780%24%40mmnet.com.au
><https://groups.google.com/d/msgid/legacy-ornamental-mills/001501d5441d%247bf74280%2473e5c780%24%40mmnet.com.au?utm_medium=email_source=footer>
>.
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com
><mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/539330565.1139451.1564200884074%40mail.yahoo.com
><https://groups.google.com/d/msgid/legacy-ornamental-mills/539330565.1139451.1564200884074%40mail.yahoo.com?utm_medium=email_source=footer>
>.
>
>
>
>---
>This email has been checked for viruses by Avast antivirus software.
>https://www.avast.com/antivirus
>
>-- 
>You received this message because you are subscribed to the Google
>Groups &quo

RE: Brand new LOM 200 for sale

2019-07-26 Thread bulkeley 
Good luck curt I hope you get it. I think Tim K is the only other member with 
one isn’t he?

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Saturday, 27 July 2019 2:15 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Brand new LOM 200 for sale

 

Hello 

 

I have wanted a 200 for quite a while now.

You are right Bill vertical template follower. The machine is limited, but it 
to offers some very real possibility's

 

I will check on it tomorrow. 

 

If I miss this one, then I just might go out and make my own unit? With Linear 
rail selling for a more reasonable prices today.  Making my own unit is 
starting to sound more like a very real possibility..

With my Dream machine, I would go longer, and give the carriage a Y movement, 
(the 200 only cuts on the center line of the spindle.) I would also like to 
figure out a way to tilt the Z axis so to cut face-plate type of work... ;-)

 

Well I did say my Dream machine... ;-p

I have to run... Have a good night.

 

C.A.G.

 

On Friday, July 26, 2019, 09:49:17 PM EDT, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

The legacy 200 a great mill for pen makers and small work if I remember it has 
a vertical template follower

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tracy Smith
Sent: Saturday, 27 July 2019 4:34 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Brand new LOM 200 for sale

 

Hello all,

 

Someone in my area is selling a never used LOW 200.  The machine is still in 
the original packaging.  It includes a router.  After looking into it, it is 
too small for me to make use of.

 

Here is the link to his online ad in case anyone is interested: 
https://classifieds.ksl.com/listing/56802557.

 

Tracy

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPnmKgBRjXoX1n_f2yqstwsPgn2-TLaVqodbs_nNGNoiDpuxtQ%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPnmKgBRjXoX1n_f2yqstwsPgn2-TLaVqodbs_nNGNoiDpuxtQ%40mail.gmail.com?utm_medium=email_source=footer>
 .

 


 
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001501d5441d%247bf74280%2473e5c780%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/001501d5441d%247bf74280%2473e5c780%24%40mmnet.com.au?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/539330565.1139451.1564200884074%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/539330565.1139451.1564200884074%40mail.yahoo.com?utm_medium=email_source=footer>
 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d54438%2427a72360%2476f56a20%24%40mmnet.com.au.

Re: Brand new LOM 200 for sale

2019-07-26 Thread 'Curt George' via Legacy Ornamental Mills 
 Hello 
I have wanted a 200 for quite a while now.You are right Bill vertical template 
follower. The machine is limited, but it to offers some very real possibility's
I will check on it tomorrow. 
If I miss this one, then I just might go out and make my own unit? With Linear 
rail selling for a more reasonable prices today.  Making my own unit is 
starting to sound more like a very real possibility..With my Dream machine, I 
would go longer, and give the carriage a Y movement, (the 200 only cuts on the 
center line of the spindle.) I would also like to figure out a way to tilt the 
Z axis so to cut face-plate type of work... ;-)
Well I did say my Dream machine... ;-pI have to run... Have a good night.
C.A.G.
On Friday, July 26, 2019, 09:49:17 PM EDT,  wrote:  
 
 #yiv2796442213 #yiv2796442213 -- _filtered #yiv2796442213 {panose-1:2 4 5 3 5 
4 6 3 2 4;} _filtered #yiv2796442213 {font-family:Calibri;panose-1:2 15 5 2 2 2 
4 3 2 4;}#yiv2796442213 #yiv2796442213 p.yiv2796442213MsoNormal, #yiv2796442213 
li.yiv2796442213MsoNormal, #yiv2796442213 div.yiv2796442213MsoNormal 
{margin:0cm;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;}#yiv2796442213
 a:link, #yiv2796442213 span.yiv2796442213MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv2796442213 a:visited, #yiv2796442213 
span.yiv2796442213MsoHyperlinkFollowed 
{color:purple;text-decoration:underline;}#yiv2796442213 
p.yiv2796442213msonormal0, #yiv2796442213 li.yiv2796442213msonormal0, 
#yiv2796442213 div.yiv2796442213msonormal0 
{margin-right:0cm;margin-left:0cm;font-size:11.0pt;font-family:sans-serif;}#yiv2796442213
 span.yiv2796442213EmailStyle19 
{font-family:sans-serif;color:windowtext;}#yiv2796442213 
.yiv2796442213MsoChpDefault {font-family:sans-serif;} _filtered #yiv2796442213 
{margin:72.0pt 72.0pt 72.0pt 72.0pt;}#yiv2796442213 
div.yiv2796442213WordSection1 {}#yiv2796442213 
The legacy 200 a great mill for pen makers and small work if I remember it has 
a vertical template follower

  

Bill

  

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tracy Smith
Sent: Saturday, 27 July 2019 4:34 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Brand new LOM 200 for sale

  

Hello all,

  

Someone in my area is selling a never used LOW 200.  The machine is still in 
the original packaging.  It includes a router.  After looking into it, it is 
too small for me to make use of.

  

Here is the link to his online ad in case anyone is interested: 
https://classifieds.ksl.com/listing/56802557.

  

Tracy

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPnmKgBRjXoX1n_f2yqstwsPgn2-TLaVqodbs_nNGNoiDpuxtQ%40mail.gmail.com.


|  | Virus-free. www.avast.com  |

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001501d5441d%247bf74280%2473e5c780%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/539330565.1139451.1564200884074%40mail.yahoo.com.

RE: Brand new LOM 200 for sale

2019-07-26 Thread bulkeley 
The legacy 200 a great mill for pen makers and small work if I remember it has 
a vertical template follower

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tracy Smith
Sent: Saturday, 27 July 2019 4:34 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Brand new LOM 200 for sale

 

Hello all,

 

Someone in my area is selling a never used LOW 200.  The machine is still in 
the original packaging.  It includes a router.  After looking into it, it is 
too small for me to make use of.

 

Here is the link to his online ad in case anyone is interested: 
https://classifieds.ksl.com/listing/56802557.

 

Tracy

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPnmKgBRjXoX1n_f2yqstwsPgn2-TLaVqodbs_nNGNoiDpuxtQ%40mail.gmail.com
 

 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001501d5441d%247bf74280%2473e5c780%24%40mmnet.com.au.

RE: Brand new LOM 200 for sale

2019-07-26 Thread Ray Clements 
Link says I’m forbidden to view – probably just as well – lol

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tracy Smith
Sent: Friday, July 26, 2019 10:51 PM
To: Legacy Ornamental Mills 
Subject: Brand new LOM 200 for sale

 

Hello all,

 

Someone in my area is selling a never used LOM 200.  The machine is still in 
the original packaging.  It includes a router.  After looking into it, it is 
too small for me to make use of.

 

Here is the link to his online ad in case anyone is interested:  
 
https://classifieds.ksl.com/listing/56802557.

 

Tracy

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/441602a7-591b-4f7c-8d70-33f31910ff26%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAuAAWidzIP7QpEnnD3kqJmMtQBAMO2jhD3dRHOtM0AqgC7tuYAAA4AABBMXXrdD0/zQKEpWnGEVltBAQA%3D%40sky.com.