Re: Converting my REVO to .125 pitch w-gears

2023-05-01 Thread Tim Ziegler 
Hey Dan,

Yeah if you find something that will simplify the process let me know,  but
for now the gear changes are the fastest.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, May 1, 2023 at 9:16 AM cdkr...@gmail.com  wrote:

> This does look interesting, Tim.  Thank you for pictures.  I'm looking at
> light duty worm gear boxes just to see what's out there.
> DanK
>
>
> On Monday, May 1, 2023 at 8:51:01 AM UTC-4 bulk...@mmnet.com.au wrote:
>
>> Of course not, I meant try the hand crank to see if it easier then you
>> will know if its
>>
>> easy and wont be straining your spindle motor or gear sets
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-orna...@googlegroups.com 
>> *On Behalf Of *Tim Ziegler
>> *Sent:* Monday, May 1, 2023 9:35 PM
>> *To:* legacy-orna...@googlegroups.com
>> *Subject:* Re: Converting my REVO to .125 pitch w-gears
>>
>>
>>
>> I was hoping I would not have to crank by hand as I get that small of
>> items my bits may want to burn so
>>
>> the less hand cranking the better.
>>
>> Well will see what the next steps are.
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 <(320)%20294-5798> shop
>>
>> 320-630-2243 <(320)%20630-2243> cell
>>
>>
>>
>>
>>
>> On Mon, May 1, 2023 at 6:24 AM  wrote:
>>
>> Yes
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-orna...@googlegroups.com 
>> *On Behalf Of *Tim Ziegler
>> *Sent:* Monday, May 1, 2023 9:07 PM
>> *To:* legacy-orna...@googlegroups.com
>> *Subject:* Re: Converting my REVO to .125 pitch w-gears
>>
>>
>>
>> you mean by hand crank?
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 <(320)%20294-5798> shop
>>
>> 320-630-2243 <(320)%20630-2243> cell
>>
>>
>>
>>
>>
>> On Sun, Apr 30, 2023 at 10:12 PM  wrote:
>>
>> Try winding it from the spindle instead Tim you might find it will take
>> less power
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-orna...@googlegroups.com 
>> *On Behalf Of *Tim Ziegler
>> *Sent:* Monday, May 1, 2023 12:47 PM
>> *To:* LOM Group ; Tim Ziegler <
>> timjz...@gmail.com>
>> *Subject:* Converting my REVO to .125 pitch w-gears
>>
>>
>>
>> Well I did it with a lot of gear mods and add ins.
>>
>> Also changed the linkage between the drive gear and the duplex gear.
>>
>> I added 4.5 inches and tapped additional holes to move the directional
>> gear
>>
>> to accommodate the X 2 gear as the drive gear. I cut out a spacer on my
>> Laser
>>
>> to allow me to put the elongated holed indexable gear in the place for a
>> drive gear.
>>
>> I have plans to change this already,as it's really changing the power it
>> takes to run it.
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 <(320)%20294-5798> shop
>>
>> 320-630-2243 <(320)%20630-2243> cell
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com?utm_medium=email_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>

Re: Converting my REVO to .125 pitch w-gears

2023-05-01 Thread Tim Ziegler 
Oh of course I have done that I turn the crank slightly to make sure all is
seated well.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, May 1, 2023 at 7:51 AM  wrote:

> Of course not, I meant try the hand crank to see if it easier then you
> will know if its
>
> easy and wont be straining your spindle motor or gear sets
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, May 1, 2023 9:35 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Converting my REVO to .125 pitch w-gears
>
>
>
> I was hoping I would not have to crank by hand as I get that small of
> items my bits may want to burn so
>
> the less hand cranking the better.
>
> Well will see what the next steps are.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, May 1, 2023 at 6:24 AM  wrote:
>
> Yes
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, May 1, 2023 9:07 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Converting my REVO to .125 pitch w-gears
>
>
>
> you mean by hand crank?
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sun, Apr 30, 2023 at 10:12 PM  wrote:
>
> Try winding it from the spindle instead Tim you might find it will take
> less power
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, May 1, 2023 12:47 PM
> *To:* LOM Group ; Tim Ziegler <
> timjzieg...@gmail.com>
> *Subject:* Converting my REVO to .125 pitch w-gears
>
>
>
> Well I did it with a lot of gear mods and add ins.
>
> Also changed the linkage between the drive gear and the duplex gear.
>
> I added 4.5 inches and tapped additional holes to move the directional
> gear
>
> to accommodate the X 2 gear as the drive gear. I cut out a spacer on my
> Laser
>
> to allow me to put the elongated holed indexable gear in the place for a
> drive gear.
>
> I have plans to change this already,as it's really changing the power it
> takes to run it.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com?utm_medium=email_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au?utm_medium=email_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/C

Re: Converting my REVO to .125 pitch w-gears

2023-05-01 Thread cdkr...@gmail.com 
This does look interesting, Tim.  Thank you for pictures.  I'm looking at 
light duty worm gear boxes just to see what's out there.
DanK


On Monday, May 1, 2023 at 8:51:01 AM UTC-4 bulk...@mmnet.com.au wrote:

> Of course not, I meant try the hand crank to see if it easier then you 
> will know if its
>
> easy and wont be straining your spindle motor or gear sets
>
>  
>
> Bill
>
>  
>
> *From:* legacy-orna...@googlegroups.com  *On 
> Behalf Of *Tim Ziegler
> *Sent:* Monday, May 1, 2023 9:35 PM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: Converting my REVO to .125 pitch w-gears
>
>  
>
> I was hoping I would not have to crank by hand as I get that small of 
> items my bits may want to burn so 
>
> the less hand cranking the better. 
>
> Well will see what the next steps are.
>
>
> Kind Regards,
>
>  
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>  
>
> 320-294-5798 <(320)%20294-5798> shop
>
> 320-630-2243 <(320)%20630-2243> cell
>
>  
>
>  
>
> On Mon, May 1, 2023 at 6:24 AM  wrote:
>
> Yes
>
>  
>
> Bill
>
>  
>
> *From:* legacy-orna...@googlegroups.com  *On 
> Behalf Of *Tim Ziegler
> *Sent:* Monday, May 1, 2023 9:07 PM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: Converting my REVO to .125 pitch w-gears
>
>  
>
> you mean by hand crank?
>
>
> Kind Regards,
>
>  
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>  
>
> 320-294-5798 <(320)%20294-5798> shop
>
> 320-630-2243 <(320)%20630-2243> cell
>
>  
>
>  
>
> On Sun, Apr 30, 2023 at 10:12 PM  wrote:
>
> Try winding it from the spindle instead Tim you might find it will take 
> less power
>
>  
>
> Bill
>
>  
>
> *From:* legacy-orna...@googlegroups.com  *On 
> Behalf Of *Tim Ziegler
> *Sent:* Monday, May 1, 2023 12:47 PM
> *To:* LOM Group ; Tim Ziegler <
> timjz...@gmail.com>
> *Subject:* Converting my REVO to .125 pitch w-gears
>
>  
>
> Well I did it with a lot of gear mods and add ins. 
>
> Also changed the linkage between the drive gear and the duplex gear.
>
> I added 4.5 inches and tapped additional holes to move the directional 
> gear 
>
> to accommodate the X 2 gear as the drive gear. I cut out a spacer on my 
> Laser 
>
> to allow me to put the elongated holed indexable gear in the place for a 
> drive gear.
>
> I have plans to change this already,as it's really changing the power it 
> takes to run it. 
>
> Kind Regards,
>
>  
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>  
>
> 320-294-5798 <(320)%20294-5798> shop
>
> 320-630-2243 <(320)%20630-2243> cell
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com?utm_medium=email_source=footer>
> .
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au?utm_medium=email_source=footer>
> .
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com

RE: Converting my REVO to .125 pitch w-gears

2023-05-01 Thread bulkeley 
Of course not, I meant try the hand crank to see if it easier then you will 
know if its

easy and wont be straining your spindle motor or gear sets

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Monday, May 1, 2023 9:35 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Converting my REVO to .125 pitch w-gears

 

I was hoping I would not have to crank by hand as I get that small of items my 
bits may want to burn so 

the less hand cranking the better. 

Well will see what the next steps are.




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, May 1, 2023 at 6:24 AM mailto:bulke...@mmnet.com.au> > wrote:

Yes

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Monday, May 1, 2023 9:07 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Converting my REVO to .125 pitch w-gears

 

you mean by hand crank?




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sun, Apr 30, 2023 at 10:12 PM mailto:bulke...@mmnet.com.au> > wrote:

Try winding it from the spindle instead Tim you might find it will take less 
power

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Monday, May 1, 2023 12:47 PM
To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >; Tim Ziegler 
mailto:timjzieg...@gmail.com> >
Subject: Converting my REVO to .125 pitch w-gears

 

Well I did it with a lot of gear mods and add ins. 

Also changed the linkage between the drive gear and the duplex gear.

I added 4.5 inches and tapped additional holes to move the directional gear 

to accommodate the X 2 gear as the drive gear. I cut out a spacer on my Laser 

to allow me to put the elongated holed indexable gear in the place for a drive 
gear.

I have plans to change this already,as it's really changing the power it takes 
to run it. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000

Re: Converting my REVO to .125 pitch w-gears

2023-05-01 Thread Tim Ziegler 
I was hoping I would not have to crank by hand as I get that small of items
my bits may want to burn so
the less hand cranking the better.
Well will see what the next steps are.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, May 1, 2023 at 6:24 AM  wrote:

> Yes
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, May 1, 2023 9:07 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Converting my REVO to .125 pitch w-gears
>
>
>
> you mean by hand crank?
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sun, Apr 30, 2023 at 10:12 PM  wrote:
>
> Try winding it from the spindle instead Tim you might find it will take
> less power
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, May 1, 2023 12:47 PM
> *To:* LOM Group ; Tim Ziegler <
> timjzieg...@gmail.com>
> *Subject:* Converting my REVO to .125 pitch w-gears
>
>
>
> Well I did it with a lot of gear mods and add ins.
>
> Also changed the linkage between the drive gear and the duplex gear.
>
> I added 4.5 inches and tapped additional holes to move the directional
> gear
>
> to accommodate the X 2 gear as the drive gear. I cut out a spacer on my
> Laser
>
> to allow me to put the elongated holed indexable gear in the place for a
> drive gear.
>
> I have plans to change this already,as it's really changing the power it
> takes to run it.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com?utm_medium=email_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au?utm_medium=email_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com?utm_medium=email_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000a01d97c1f%2477c59c50%246750d4f0%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000a01d97c1f%2477c59c50%246750d4f0%24%40mmnet.com.au?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFGGpt-BU4f3x5cxaiDc5fodQMf0aC7pUEMH6gio_%2BXGw%40mail.gmail.com.

RE: Converting my REVO to .125 pitch w-gears

2023-05-01 Thread bulkeley 
Yes

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Monday, May 1, 2023 9:07 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Converting my REVO to .125 pitch w-gears

 

you mean by hand crank?




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sun, Apr 30, 2023 at 10:12 PM mailto:bulke...@mmnet.com.au> > wrote:

Try winding it from the spindle instead Tim you might find it will take less 
power

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Monday, May 1, 2023 12:47 PM
To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >; Tim Ziegler 
mailto:timjzieg...@gmail.com> >
Subject: Converting my REVO to .125 pitch w-gears

 

Well I did it with a lot of gear mods and add ins. 

Also changed the linkage between the drive gear and the duplex gear.

I added 4.5 inches and tapped additional holes to move the directional gear 

to accommodate the X 2 gear as the drive gear. I cut out a spacer on my Laser 

to allow me to put the elongated holed indexable gear in the place for a drive 
gear.

I have plans to change this already,as it's really changing the power it takes 
to run it. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000a01d97c1f%2477c59c50%246750d4f0%24%40mmnet.com.au.

Re: Converting my REVO to .125 pitch w-gears

2023-05-01 Thread Tim Ziegler 
you mean by hand crank?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Apr 30, 2023 at 10:12 PM  wrote:

> Try winding it from the spindle instead Tim you might find it will take
> less power
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, May 1, 2023 12:47 PM
> *To:* LOM Group ; Tim Ziegler <
> timjzieg...@gmail.com>
> *Subject:* Converting my REVO to .125 pitch w-gears
>
>
>
> Well I did it with a lot of gear mods and add ins.
>
> Also changed the linkage between the drive gear and the duplex gear.
>
> I added 4.5 inches and tapped additional holes to move the directional
> gear
>
> to accommodate the X 2 gear as the drive gear. I cut out a spacer on my
> Laser
>
> to allow me to put the elongated holed indexable gear in the place for a
> drive gear.
>
> I have plans to change this already,as it's really changing the power it
> takes to run it.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com.

RE: Converting my REVO to .125 pitch w-gears

2023-04-30 Thread bulkeley 
Try winding it from the spindle instead Tim you might find it will take less 
power

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Monday, May 1, 2023 12:47 PM
To: LOM Group ; Tim Ziegler 

Subject: Converting my REVO to .125 pitch w-gears

 

Well I did it with a lot of gear mods and add ins. 

Also changed the linkage between the drive gear and the duplex gear.

I added 4.5 inches and tapped additional holes to move the directional gear 

to accommodate the X 2 gear as the drive gear. I cut out a spacer on my Laser 

to allow me to put the elongated holed indexable gear in the place for a drive 
gear.

I have plans to change this already,as it's really changing the power it takes 
to run it. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au.