Re: Rotary Table odd question
Hi ppl.yup my mdf.was a tad proud and I had to shave it,I use a Revo,but the rotary table needed lubing and the Delron spacers shaved to all match,but it is a great addition to anybody's tools,MAC. On Jun 18, 6:05 am, Tim Krause artmarb...@comcast.net wrote: I never machined my top on my rotary table. I know others have. I guess that would true up the surface rather than fixing the delrin pads. I do know your table top would run into my 20 tooth gear and I would not be able to turn my table. The large gear is 13.5 diameter. Here's a picture that show how my 20 tooth gear stick above the rotary table by .110. I did a quick and dirty trim job on the waste board to make it fit originally. Is this the way it looks on everyone's table? -Tim - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, June 17, 2010 7:17 PM Subject: Re: Rotary Table odd question sorry Tim I was incorrect before... measuring with a tape my large gear on the rotary table is just over 13 1/2 dia and to correct my self I need to learn to read a tape ha ha the blank is 13 3/8 dia it sits nice just smaller than the teeth on the large gear I don't know if mine is strait or not I just machined it true after attaching my blank to it Bill - Original Message - From: Tim Krause To: legacy-ornamental-mills@googlegroups.com Sent: Friday, June 18, 2010 10:47 AM Subject: Re: Rotary Table odd question Hi Bill, So your stock table is hanging over the gears on the large diameter gear? That would really cause problems on mine. I also found out last night that the table is not level to the base. The 4 delrin spacers that support the table are all different heights on my table. That's an easy fix, but a bit of a surprise. Also discovered the table has a huge dip in the center. With the mdf in place it does not matter, but interesting to note. -Tim - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, June 17, 2010 5:12 PM Subject: Re: Rotary Table odd question well my table is for the revo which I add too to fit the 900 as well but it seems to be the same dia gears my blank is 13 5/8 dia which is 1/8 larger than what I think you said yours was Bill - Original Message - From: Tim Krause To: legacy-ornamental-mills@googlegroups.com Sent: Friday, June 18, 2010 3:21 AM Subject: Re: Rotary Table odd question What's the diameter of the stock one? - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, June 17, 2010 7:22 AM Subject: Re: Rotary Table odd question I still have my board unused I made my own and turned it as well so I don't know if it hits either Bill ps Tim what did you think a bout my crazy idea? - Original Message - From: Tim Krause To: Legacy-Ornamental-Mills@googlegroups.com Sent: Thursday, June 17, 2010 5:26 PM Subject: Rotary Table odd question Hello All, When I bought my rotary table I discovered that the mdf waste board provided by Legacy was too big for the table. It was 13.25 in diameter. The diameter made it hard to turn because the 20 tooth gear on the rotary table ate into the mdf and left dimples where the teeth were hitting. I ended up turning the table down to 13.125 and it fits just fine. My question is this, did anyone else have the same problem? -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group athttp://groups.google.com/group/legacy-ornamental-mills?hl=en. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group athttp://groups.google.com/group/legacy-ornamental-mills?hl=en. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send
Rotary Table odd question
Hello All, When I bought my rotary table I discovered that the mdf waste board provided by Legacy was too big for the table. It was 13.25 in diameter. The diameter made it hard to turn because the 20 tooth gear on the rotary table ate into the mdf and left dimples where the teeth were hitting. I ended up turning the table down to 13.125 and it fits just fine. My question is this, did anyone else have the same problem? -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en.
Re: Rotary Table odd question
I still have my board unused I made my own and turned it as well so I don't know if it hits either Bill ps Tim what did you think a bout my crazy idea? - Original Message - From: Tim Krause To: Legacy-Ornamental-Mills@googlegroups.com Sent: Thursday, June 17, 2010 5:26 PM Subject: Rotary Table odd question Hello All, When I bought my rotary table I discovered that the mdf waste board provided by Legacy was too big for the table. It was 13.25 in diameter. The diameter made it hard to turn because the 20 tooth gear on the rotary table ate into the mdf and left dimples where the teeth were hitting. I ended up turning the table down to 13.125 and it fits just fine. My question is this, did anyone else have the same problem? -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en.
Re: Rotary Table odd question
What's the diameter of the stock one? - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, June 17, 2010 7:22 AM Subject: Re: Rotary Table odd question I still have my board unused I made my own and turned it as well so I don't know if it hits either Bill ps Tim what did you think a bout my crazy idea? - Original Message - From: Tim Krause To: Legacy-Ornamental-Mills@googlegroups.com Sent: Thursday, June 17, 2010 5:26 PM Subject: Rotary Table odd question Hello All, When I bought my rotary table I discovered that the mdf waste board provided by Legacy was too big for the table. It was 13.25 in diameter. The diameter made it hard to turn because the 20 tooth gear on the rotary table ate into the mdf and left dimples where the teeth were hitting. I ended up turning the table down to 13.125 and it fits just fine. My question is this, did anyone else have the same problem? -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en.
Re: Rotary Table odd question
well my table is for the revo which I add too to fit the 900 as well but it seems to be the same dia gears my blank is 13 5/8 dia which is 1/8 larger than what I think you said yours was Bill - Original Message - From: Tim Krause To: legacy-ornamental-mills@googlegroups.com Sent: Friday, June 18, 2010 3:21 AM Subject: Re: Rotary Table odd question What's the diameter of the stock one? - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, June 17, 2010 7:22 AM Subject: Re: Rotary Table odd question I still have my board unused I made my own and turned it as well so I don't know if it hits either Bill ps Tim what did you think a bout my crazy idea? - Original Message - From: Tim Krause To: Legacy-Ornamental-Mills@googlegroups.com Sent: Thursday, June 17, 2010 5:26 PM Subject: Rotary Table odd question Hello All, When I bought my rotary table I discovered that the mdf waste board provided by Legacy was too big for the table. It was 13.25 in diameter. The diameter made it hard to turn because the 20 tooth gear on the rotary table ate into the mdf and left dimples where the teeth were hitting. I ended up turning the table down to 13.125 and it fits just fine. My question is this, did anyone else have the same problem? -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en.
Re: Rotary Table odd question
Hello all. Bill what is your crazy idea? I haven't heard any thing that sounded crazy from anyone on this topic so far. If you have an off the wall idea, I for one would like to hear it. ;-) C.A.G. - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, June 17, 2010 10:22 AM Subject: Re: Rotary Table odd question I still have my board unused I made my own and turned it as well so I don't know if it hits either Bill ps Tim what did you think a bout my crazy idea? - Original Message - From: Tim Krause To: Legacy-Ornamental-Mills@googlegroups.com Sent: Thursday, June 17, 2010 5:26 PM Subject: Rotary Table odd question Hello All, When I bought my rotary table I discovered that the mdf waste board provided by Legacy was too big for the table. It was 13.25 in diameter. The diameter made it hard to turn because the 20 tooth gear on the rotary table ate into the mdf and left dimples where the teeth were hitting. I ended up turning the table down to 13.125 and it fits just fine. My question is this, did anyone else have the same problem? -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en.
Re: Rotary Table odd question
That was another topic for only me. - Original Message - From: curt george To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, June 17, 2010 5:27 PM Subject: Re: Rotary Table odd question Hello all. Bill what is your crazy idea? I haven't heard any thing that sounded crazy from anyone on this topic so far. If you have an off the wall idea, I for one would like to hear it. ;-) C.A.G. - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, June 17, 2010 10:22 AM Subject: Re: Rotary Table odd question I still have my board unused I made my own and turned it as well so I don't know if it hits either Bill ps Tim what did you think a bout my crazy idea? - Original Message - From: Tim Krause To: Legacy-Ornamental-Mills@googlegroups.com Sent: Thursday, June 17, 2010 5:26 PM Subject: Rotary Table odd question Hello All, When I bought my rotary table I discovered that the mdf waste board provided by Legacy was too big for the table. It was 13.25 in diameter. The diameter made it hard to turn because the 20 tooth gear on the rotary table ate into the mdf and left dimples where the teeth were hitting. I ended up turning the table down to 13.125 and it fits just fine. My question is this, did anyone else have the same problem? -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en.
Re: Rotary Table odd question
Hi Bill, So your stock table is hanging over the gears on the large diameter gear? That would really cause problems on mine. I also found out last night that the table is not level to the base. The 4 delrin spacers that support the table are all different heights on my table. That's an easy fix, but a bit of a surprise. Also discovered the table has a huge dip in the center. With the mdf in place it does not matter, but interesting to note. -Tim - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, June 17, 2010 5:12 PM Subject: Re: Rotary Table odd question well my table is for the revo which I add too to fit the 900 as well but it seems to be the same dia gears my blank is 13 5/8 dia which is 1/8 larger than what I think you said yours was Bill - Original Message - From: Tim Krause To: legacy-ornamental-mills@googlegroups.com Sent: Friday, June 18, 2010 3:21 AM Subject: Re: Rotary Table odd question What's the diameter of the stock one? - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, June 17, 2010 7:22 AM Subject: Re: Rotary Table odd question I still have my board unused I made my own and turned it as well so I don't know if it hits either Bill ps Tim what did you think a bout my crazy idea? - Original Message - From: Tim Krause To: Legacy-Ornamental-Mills@googlegroups.com Sent: Thursday, June 17, 2010 5:26 PM Subject: Rotary Table odd question Hello All, When I bought my rotary table I discovered that the mdf waste board provided by Legacy was too big for the table. It was 13.25 in diameter. The diameter made it hard to turn because the 20 tooth gear on the rotary table ate into the mdf and left dimples where the teeth were hitting. I ended up turning the table down to 13.125 and it fits just fine. My question is this, did anyone else have the same problem? -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To post to this group, send email to legacy-ornamental-mi...@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en.