Re: Spring is coming, and so is Valentine's Day
The attachment is a LibreOffice Calc workbook. It should open correctly in Excel. It's the same file as before, so I'm not sure why it wouldn't work now. Make sure it's version 11.2. DanK On Thursday, February 8, 2024 at 11:58:59 PM UTC-5 Curt George wrote: > Hello Everyone. (just got home from work.) > Very nice Dan. I am having a problem opening your file. (I am down > loading it now, and then perhaps I will be able to see what you have there?) > > I do like your vases. Keep up the good work. > Thank you. > > C.A.G. > On Thursday, February 8, 2024 at 07:22:31 PM EST, Tim Ziegler < > timjz...@gmail.com> wrote: > > > Hey Curt you see this? When you get home from work of course. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > Ziegler Laser Worx LLC > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 <(320)%20294-5798> shop > 320-630-2243 <(320)%20630-2243> cell > > > On Thu, Feb 8, 2024 at 3:32 PM cdkr...@gmail.com > wrote: > > Well, it didn't take very long. I didn't realize that there were still > external links > hanging around in some remote formulas. Got those fixed, so NOW the > Legacy Charts 11.2 should work. > Can Curt or somebody remove the attachment of 11.1 in previous message > to eliminate more confusion? Please? > DanK > > On Thursday, February 8, 2024 at 12:29:14 PM UTC-5 cdkr...@gmail.com > wrote: > > I finished another vase this morning indexing 12 cuts around the > bottom and 5 cuts around the top to start the petals without changing > the setup. Just used a different move chart. Again, turned > on lathe, moved to REVO, then hand carved petals. Apple and pear > are very hard to carve. They burn easily under power tools. > So now I'm pretty confident that I have the vernier operation on > the 72 hole ring down pat and the charts I printed out are accurate. > It goes fast when you know what to do. And it's nice to have a lathe > adapter > that holds the Legacy drive plate spurs. > [image: VaseApple.PNG] > > I am attaching Legacy Charts 11.1 with the completed and now > verified updates. It seems that every time I post it, I find an error > just after posting it! Grandsons helped a lot with the underlying > math. It has a new sheet with the underlying development laid > out and it is *only* for supporting the cells on "Vernier Operation" > sheet, and on the VO sheet there is only one cell to interact with. > Many things not needed by the operator are hidden, and you will > notice the output range changes depending upon how many moves > the required index takes. The sheets are protected without password > to prevent accidental changes. You may have to unprotect the VO > sheet to select print range, otherwise it will print 17 pages of blanks.. > The "Vernier Operation" sheet has operation description and pictures. > > With this setup, it's like having 30 (and more) index rings. In addition, > indexing is done very precisely on the fly without referring to rulers > on the frame. It allows to make multiple passes or even incremental > offset passes while maintaining the full range of pitches the gear > system offers. > > I'll try to answer any questions. > DanK > On Thursday, February 8, 2024 at 9:58:11 AM UTC-5 Tim Ziegler wrote: > > Cant wait to see it for sure. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > Ziegler Laser Worx LLC > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Thu, Feb 8, 2024 at 7:44 AM cdkr...@gmail.com > wrote: > > Thank you, guys. It is a combo project, turned on lathe, decorated on > REVO with top cut 60° V cutter making 15 indexed 6" pitch cuts, and > then carved on the top. This is unfinished pear wood. I put Danish > Oil on it an gave it away immediately to shop visitor, so didn't get a > picture of it with finish. Next one is already turned, indexed at 12 cuts > because it is slightly smaller, and will carve on the top today a different > style of "petals". I already like it better. > DanK > > On Thursday, February 8, 2024 at 12:15:17 AM UTC-5 Curt George wrote: > > Hey Dan! That's Very nice looking flower pot/vase. > > Did you rope form the side of the vase? (3/9"O"clock position.) > > C.A.G. > On Thursday, February 8, 2024 at 12:04:02 AM EST, M.W.Foscue < > mwfo...@earthlink.net> wrote: > > > Dan, > > > > Very nice - thank you for sharing. > > Is this a "combination turning & carving" project? > >
Re: Spring is coming, and so is Valentine's Day
Hello Everyone. (just got home from work.)Very nice Dan. I am having a problem opening your file. (I am down loading it now, and then perhaps I will be able to see what you have there?) I do like your vases. Keep up the good work.Thank you. C.A.G.On Thursday, February 8, 2024 at 07:22:31 PM EST, Tim Ziegler wrote: Hey Curt you see this? When you get home from work of course. Kind Regards, Timothy J. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Thu, Feb 8, 2024 at 3:32 PM cdkr...@gmail.com wrote: Well, it didn't take very long. I didn't realize that there were still external linkshanging around in some remote formulas. Got those fixed, so NOW theLegacy Charts 11.2 should work. Can Curt or somebody remove the attachment of 11.1 in previous messageto eliminate more confusion? Please?DanK On Thursday, February 8, 2024 at 12:29:14 PM UTC-5 cdkr...@gmail.com wrote: I finished another vase this morning indexing 12 cuts around the bottom and 5 cuts around the top to start the petals without changingthe setup. Just used a different move chart. Again, turned on lathe, moved to REVO, then hand carved petals. Apple and pearare very hard to carve. They burn easily under power tools.So now I'm pretty confident that I have the vernier operation on the 72 hole ring down pat and the charts I printed out are accurate.It goes fast when you know what to do. And it's nice to have a lathe adapterthat holds the Legacy drive plate spurs. I am attaching Legacy Charts 11.1 with the completed and now verified updates. It seems that every time I post it, I find an errorjust after posting it! Grandsons helped a lot with the underlyingmath. It has a new sheet with the underlying development laidout and it is only for supporting the cells on "Vernier Operation" sheet, and on the VO sheet there is only one cell to interact with. Many things not needed by the operator are hidden, and you willnotice the output range changes depending upon how many movesthe required index takes. The sheets are protected without passwordto prevent accidental changes. You may have to unprotect the VO sheet to select print range, otherwise it will print 17 pages of blanks..The "Vernier Operation" sheet has operation description and pictures. With this setup, it's like having 30 (and more) index rings. In addition,indexing is done very precisely on the fly without referring to rulerson the frame. It allows to make multiple passes or even incremental offset passes while maintaining the full range of pitches the gearsystem offers. I'll try to answer any questions. DanK On Thursday, February 8, 2024 at 9:58:11 AM UTC-5 Tim Ziegler wrote: Cant wait to see it for sure. Kind Regards, Timothy J. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Thu, Feb 8, 2024 at 7:44 AM cdkr...@gmail.com wrote: Thank you, guys. It is a combo project, turned on lathe, decorated on REVO with top cut 60° V cutter making 15 indexed 6" pitch cuts, andthen carved on the top. This is unfinished pear wood. I put DanishOil on it an gave it away immediately to shop visitor, so didn't get apicture of it with finish. Next one is already turned, indexed at 12 cutsbecause it is slightly smaller, and will carve on the top today a differentstyle of "petals". I already like it better. DanK On Thursday, February 8, 2024 at 12:15:17 AM UTC-5 Curt George wrote: Hey Dan! That's Very nice looking flower pot/vase. Did you rope form the side of the vase? (3/9"O"clock position.) C.A.G.On Thursday, February 8, 2024 at 12:04:02 AM EST, M.W.Foscue wrote: Dan, Very nice - thank you for sharing. Is this a "combination turning & carving" project? Turning the vase, indexing where the petals' start, center point, and end points are while vase is still in the lathe using the indexing plate? And then removing it from lathe and carving the petals? Thanks again. Mac -Original Message- From: Sent: Feb 7, 2024 10:19 PM To: Subject: Re: Spring is coming, and so is Valentine's Day Very cool and we appreciate all you are doing with those charts. Kind Regards, Timothy J. ZieglerOn Wed, Feb 7, 2024 at 7:08 PM cdkr...@gmail.com wrote: In the process of verifying the vernier operations of the 72 hole index gear, I'm making several vases of different forms as the knife roams. Part of the process is discovering what looks good at the top. This form doesn't please me, so I tried to distract with some spirals at the bottom w indexed dots. The top has 5 petals and there are 15 stripes. There is an plastic insert so real flowers can sit in water. Works a charm. After a couple more are made, I
Re: Spring is coming, and so is Valentine's Day
Hey Curt you see this? When you get home from work of course. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Thu, Feb 8, 2024 at 3:32 PM cdkr...@gmail.com wrote: > Well, it didn't take very long. I didn't realize that there were still > external links > hanging around in some remote formulas. Got those fixed, so NOW the > Legacy Charts 11.2 should work. > Can Curt or somebody remove the attachment of 11.1 in previous message > to eliminate more confusion? Please? > DanK > > On Thursday, February 8, 2024 at 12:29:14 PM UTC-5 cdkr...@gmail.com > wrote: > >> I finished another vase this morning indexing 12 cuts around the >> bottom and 5 cuts around the top to start the petals without changing >> the setup. Just used a different move chart. Again, turned >> on lathe, moved to REVO, then hand carved petals. Apple and pear >> are very hard to carve. They burn easily under power tools. >> So now I'm pretty confident that I have the vernier operation on >> the 72 hole ring down pat and the charts I printed out are accurate. >> It goes fast when you know what to do. And it's nice to have a lathe >> adapter >> that holds the Legacy drive plate spurs. >> [image: VaseApple.PNG] >> >> I am attaching Legacy Charts 11.1 with the completed and now >> verified updates. It seems that every time I post it, I find an error >> just after posting it! Grandsons helped a lot with the underlying >> math. It has a new sheet with the underlying development laid >> out and it is *only* for supporting the cells on "Vernier Operation" >> sheet, and on the VO sheet there is only one cell to interact with. >> Many things not needed by the operator are hidden, and you will >> notice the output range changes depending upon how many moves >> the required index takes. The sheets are protected without password >> to prevent accidental changes. You may have to unprotect the VO >> sheet to select print range, otherwise it will print 17 pages of blanks.. >> The "Vernier Operation" sheet has operation description and pictures. >> >> With this setup, it's like having 30 (and more) index rings. In addition, >> indexing is done very precisely on the fly without referring to rulers >> on the frame. It allows to make multiple passes or even incremental >> offset passes while maintaining the full range of pitches the gear >> system offers. >> >> I'll try to answer any questions. >> DanK >> On Thursday, February 8, 2024 at 9:58:11 AM UTC-5 Tim Ziegler wrote: >> >>> Cant wait to see it for sure. >>> >>> Kind Regards, >>> >>> Timothy J. Ziegler >>> Ziegler WoodWork & Specialty >>> Ziegler Laser Worx LLC >>> 14171 160th Ave. >>> Foreston MN 56330 >>> >>> 320-294-5798 <(320)%20294-5798> shop >>> 320-630-2243 <(320)%20630-2243> cell >>> >>> >>> On Thu, Feb 8, 2024 at 7:44 AM cdkr...@gmail.com >>> wrote: >>> >>>> Thank you, guys. It is a combo project, turned on lathe, decorated on >>>> REVO with top cut 60° V cutter making 15 indexed 6" pitch cuts, and >>>> then carved on the top. This is unfinished pear wood. I put Danish >>>> Oil on it an gave it away immediately to shop visitor, so didn't get a >>>> picture of it with finish. Next one is already turned, indexed at 12 >>>> cuts >>>> because it is slightly smaller, and will carve on the top today a >>>> different >>>> style of "petals". I already like it better. >>>> DanK >>>> >>>> On Thursday, February 8, 2024 at 12:15:17 AM UTC-5 Curt George wrote: >>>> >>>>> Hey Dan! That's Very nice looking flower pot/vase. >>>>> >>>>> Did you rope form the side of the vase? (3/9"O"clock position.) >>>>> >>>>> C.A.G. >>>>> On Thursday, February 8, 2024 at 12:04:02 AM EST, M.W.Foscue < >>>>> mwfo...@earthlink.net> wrote: >>>>> >>>>> >>>>> Dan, >>>>> >>>>> >>>>> >>>>> Very nice - thank you for sharing. >>>>> >>>>> Is this a "combination turning & carving" project? >>>>> >>>>> Turning the vase, indexing where the petals' start, center point, and >&g
Re: Spring is coming, and so is Valentine's Day
Cant wait to see it for sure. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Thu, Feb 8, 2024 at 7:44 AM cdkr...@gmail.com wrote: > Thank you, guys. It is a combo project, turned on lathe, decorated on > REVO with top cut 60° V cutter making 15 indexed 6" pitch cuts, and > then carved on the top. This is unfinished pear wood. I put Danish > Oil on it an gave it away immediately to shop visitor, so didn't get a > picture of it with finish. Next one is already turned, indexed at 12 cuts > because it is slightly smaller, and will carve on the top today a different > style of "petals". I already like it better. > DanK > > On Thursday, February 8, 2024 at 12:15:17 AM UTC-5 Curt George wrote: > >> Hey Dan! That's Very nice looking flower pot/vase. >> >> Did you rope form the side of the vase? (3/9"O"clock position.) >> >> C.A.G. >> On Thursday, February 8, 2024 at 12:04:02 AM EST, M.W.Foscue < >> mwfo...@earthlink.net> wrote: >> >> >> Dan, >> >> >> >> Very nice - thank you for sharing. >> >> Is this a "combination turning & carving" project? >> >> Turning the vase, indexing where the petals' start, center point, and end >> points are while vase is still in the lathe using the indexing plate? >> >> And then removing it from lathe and carving the petals? >> >> >> >> Thanks again. >> >> Mac >> -- >> -- >> >> -Original Message- >> From: >> Sent: Feb 7, 2024 10:19 PM >> To: >> Subject: Re: Spring is coming, and so is Valentine's Day >> >> >> Very cool and we appreciate all you are doing with those charts. >> >> Kind Regards, >> >> Timothy J. Ziegler >> -- >> -- >> On Wed, Feb 7, 2024 at 7:08 PM cdkr...@gmail.com >> wrote: >> >> In the process of verifying the vernier operations of the 72 hole index >> gear, I'm making several vases of different forms as the knife roams. Part >> of the process is discovering what looks good at the top. This form >> doesn't please me, so I tried to distract with some spirals at the bottom w >> indexed dots. The top has 5 petals and there are 15 stripes. There is an >> plastic insert so real flowers can sit in water. >> >> Works a charm. After a couple more are made, I'll post the latest tried >> and true version of Legacy Charts. It's frustrating to find errors AFTER >> it's posted. They're hard to find. >> [image: Vase.PNG] >> The lazy Susan in the background was posted before. >> DanK >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/27726bdf-eef3-fc85-463d-246ada81e49a%40earthlink.net >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/27726bdf-eef3-fc85-463d-246ada81e49a%40earthlink.net?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/536c6f38-44fd-4b84-aa8b-a304c091df5an%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/536c6f38-44fd-4b84-aa8b-a304c091df5an%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHLhrt3XA5KChgmVHf2nm_UA5zKNe5EKXC5ijYDqesw0A%40mail.gmail.com.
Re: Spring is coming, and so is Valentine's Day
Thank you, guys. It is a combo project, turned on lathe, decorated on REVO with top cut 60° V cutter making 15 indexed 6" pitch cuts, and then carved on the top. This is unfinished pear wood. I put Danish Oil on it an gave it away immediately to shop visitor, so didn't get a picture of it with finish. Next one is already turned, indexed at 12 cuts because it is slightly smaller, and will carve on the top today a different style of "petals". I already like it better. DanK On Thursday, February 8, 2024 at 12:15:17 AM UTC-5 Curt George wrote: > Hey Dan! That's Very nice looking flower pot/vase. > > Did you rope form the side of the vase? (3/9"O"clock position.) > > C.A.G. > On Thursday, February 8, 2024 at 12:04:02 AM EST, M.W.Foscue < > mwfo...@earthlink.net> wrote: > > > Dan, > > > > Very nice - thank you for sharing. > > Is this a "combination turning & carving" project? > > Turning the vase, indexing where the petals' start, center point, and end > points are while vase is still in the lathe using the indexing plate? > > And then removing it from lathe and carving the petals? > > > > Thanks again. > > Mac > -------------- > ---------- > > -Original Message- > From: > Sent: Feb 7, 2024 10:19 PM > To: > Subject: Re: Spring is coming, and so is Valentine's Day > > > Very cool and we appreciate all you are doing with those charts. > > Kind Regards, > > Timothy J. Ziegler > -- > -- > On Wed, Feb 7, 2024 at 7:08 PM cdkr...@gmail.com > wrote: > > In the process of verifying the vernier operations of the 72 hole index > gear, I'm making several vases of different forms as the knife roams. Part > of the process is discovering what looks good at the top. This form > doesn't please me, so I tried to distract with some spirals at the bottom w > indexed dots. The top has 5 petals and there are 15 stripes. There is an > plastic insert so real flowers can sit in water. > > Works a charm. After a couple more are made, I'll post the latest tried > and true version of Legacy Charts. It's frustrating to find errors AFTER > it's posted. They're hard to find. > [image: Vase.PNG] > The lazy Susan in the background was posted before. > DanK > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/27726bdf-eef3-fc85-463d-246ada81e49a%40earthlink.net > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/27726bdf-eef3-fc85-463d-246ada81e49a%40earthlink.net?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/536c6f38-44fd-4b84-aa8b-a304c091df5an%40googlegroups.com.