Re: revo drive motor

2020-08-28 Thread Richard Ellis 
Hi Bill
Excellent job I have been toying with a similar idea. Using a small 3 phase 
geared motor controlled by an inverter. I was thinking about using a flat 
pulley driven by the shaft of the motor covered in leather. The whole thing 
counterbalanced.Years ago I used to shear sheep with a similar set up
Richard

On Thursday, August 27, 2020 at 12:04:08 PM UTC+1, aussiman wrote:
>
> I finally mounted a drive motor to my revo today I’m sick of winding the 
> handle also added more of my folding stops
>
>  
>
> https://youtu.be/p2olosNXa80
>
>  
>
> Bill
>
>  
>
>
> 
>  Virus-free. 
> www.avast.com 
> 
>  
> <#01d67c61$c2770420$47650c60$@mmnet.com.au_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/314b1aff-e4eb-4918-8fea-4fcc2abb3172o%40googlegroups.com.

RE: revo drive motor

2020-08-28 Thread bulkeley 
I bought them they are real cheap on ebay

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Friday, 28 August 2020 2:22 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: revo drive motor

 

Very nice Bill.

 

did you buy those stops, or make them...? AND how about a close up photo.

 

C.A.G.

 

On Thursday, August 27, 2020, 11:03:51 AM EDT, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

The flip stops are manual they are used to set the carriage at specific places 
for doing reliefs, end of spirals,feet,knobs and such anything to do with a 
repeated measured distance. The electric limit switches are there I just 
haven’t shown them yet my next video is going to show milling a 4 inch single 
start rope moulding spiral done with the combination bits I was going to do a 
barley but the blank is not big enough I need a bit of strength to it so I’m 
trying a rope instead That’s when I will try out the limit switches.

 

Bill 

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Thursday, 27 August 2020 11:10 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: revo drive motor

 

Very Nice Bill !

 

One question, is your limit switch on the carriage its self, so your flip down 
stops don't have to be wired? Or are they just manual?

Your set up is very nice.

thanks for showing us your set-up...

 

C.A.G.

On Thursday, August 27, 2020, 07:10:21 AM EDT, bulke...@mmnet.com.au 
<mailto:bulke...@mmnet.com.au>  mailto:bulke...@mmnet.com.au> > wrote: 

 

 

I finally mounted a drive motor to my revo today I’m sick of winding the handle 
also added more of my folding stops

 

https://youtu.be/p2olosNXa80

 

Bill

 

 


 
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
 

Virus-free.  
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d67c61%24c2770420%2447650c60%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/01d67c61%24c2770420%2447650c60%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2057280419.6198694.1598533808068%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/2057280419.6198694.1598533808068%40mail.yahoo.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d67c83%244144b470%24c3ce1d50%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/01d67c83%244144b470%24c3ce1d50%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1855777990.6531424.1598588531148%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1855777990.6531424.1598588531148%40mail.yahoo.com?utm_medium=email&utm_source=footer>
 .



-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group a

Re: revo drive motor

2020-08-27 Thread 'Curt George' via Legacy Ornamental Mills 
 Very nice Bill.
did you buy those stops, or make them...? AND how about a close up photo.
C.A.G.
On Thursday, August 27, 2020, 11:03:51 AM EDT,  
wrote:  
 
 #yiv7534427660 #yiv7534427660 -- _filtered {} _filtered {} _filtered 
{}#yiv7534427660 #yiv7534427660 p.yiv7534427660MsoNormal, #yiv7534427660 
li.yiv7534427660MsoNormal, #yiv7534427660 div.yiv7534427660MsoNormal 
{margin:0cm;font-size:11.0pt;font-family:sans-serif;}#yiv7534427660 a:link, 
#yiv7534427660 span.yiv7534427660MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv7534427660 p.yiv7534427660msonormal, 
#yiv7534427660 li.yiv7534427660msonormal, #yiv7534427660 
div.yiv7534427660msonormal 
{margin-right:0cm;margin-left:0cm;font-size:11.0pt;font-family:sans-serif;}#yiv7534427660
 span.yiv7534427660EmailStyle29 
{font-family:sans-serif;color:windowtext;}#yiv7534427660 
.yiv7534427660MsoChpDefault {font-size:10.0pt;} _filtered {}#yiv7534427660 
div.yiv7534427660WordSection1 {}#yiv7534427660 
The flip stops are manual they are used to set the carriage at specific places 
for doing reliefs, end of spirals,feet,knobs and such anything to do with a 
repeated measured distance. The electric limit switches are there I just 
haven’t shown them yet my next video is going to show milling a 4 inch single 
start rope moulding spiral done with the combination bits I was going to do a 
barley but the blank is not big enough I need a bit of strength to it so I’m 
trying a rope instead That’s when I will try out the limit switches.

  

Bill 

  

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Thursday, 27 August 2020 11:10 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: revo drive motor

  

Very Nice Bill !

  

One question, is your limit switch on the carriage its self, so your flip down 
stops don't have to be wired? Or are they just manual?

Your set up is very nice.

thanks for showing us your set-up...

  

C.A.G.

On Thursday, August 27, 2020, 07:10:21 AM EDT, bulke...@mmnet.com.au 
 wrote: 

  

  

I finally mounted a drive motor to my revo today I’m sick of winding the handle 
also added more of my folding stops

 

https://youtu.be/p2olosNXa80

 

Bill

 

  

| 

 | 
Virus-free. www.avast.com 
 |


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d67c61%24c2770420%2447650c60%24%40mmnet.com.au.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2057280419.6198694.1598533808068%40mail.yahoo.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d67c83%244144b470%24c3ce1d50%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1855777990.6531424.1598588531148%40mail.yahoo.com.

RE: revo drive motor

2020-08-27 Thread bulkeley 
The flip stops are manual they are used to set the carriage at specific places 
for doing reliefs, end of spirals,feet,knobs and such anything to do with a 
repeated measured distance. The electric limit switches are there I just 
haven’t shown them yet my next video is going to show milling a 4 inch single 
start rope moulding spiral done with the combination bits I was going to do a 
barley but the blank is not big enough I need a bit of strength to it so I’m 
trying a rope instead That’s when I will try out the limit switches.

 

Bill 

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Thursday, 27 August 2020 11:10 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: revo drive motor

 

Very Nice Bill !

 

One question, is your limit switch on the carriage its self, so your flip down 
stops don't have to be wired? Or are they just manual?

Your set up is very nice.

thanks for showing us your set-up...

 

C.A.G.

On Thursday, August 27, 2020, 07:10:21 AM EDT, bulke...@mmnet.com.au 
<mailto:bulke...@mmnet.com.au>  mailto:bulke...@mmnet.com.au> > wrote: 

 

 

I finally mounted a drive motor to my revo today I’m sick of winding the handle 
also added more of my folding stops

 

https://youtu.be/p2olosNXa80

 

Bill

 

 


 
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
 

Virus-free.  
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d67c61%24c2770420%2447650c60%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/01d67c61%24c2770420%2447650c60%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2057280419.6198694.1598533808068%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/2057280419.6198694.1598533808068%40mail.yahoo.com?utm_medium=email&utm_source=footer>
 .



-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d67c83%244144b470%24c3ce1d50%24%40mmnet.com.au.

Re: revo drive motor

2020-08-27 Thread 'Curt George' via Legacy Ornamental Mills 
 Very Nice Bill !
One question, is your limit switch on the carriage its self, so your flip down 
stops don't have to be wired? Or are they just manual?Your set up is very 
nice.thanks for showing us your set-up...
C.A.G.On Thursday, August 27, 2020, 07:10:21 AM EDT, bulke...@mmnet.com.au 
 wrote:  
 
 
I finally mounted a drive motor to my revo today I’m sick of winding the handle 
also added more of my folding stops

  

https://youtu.be/p2olosNXa80

  

Bill

  


|  | Virus-free. www.avast.com  |

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d67c61%24c2770420%2447650c60%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2057280419.6198694.1598533808068%40mail.yahoo.com.

Re: revo drive motor

2020-08-27 Thread Tim Ziegler 
Gottcha,
So far one complete woodchuck and a 1200 Legacy. with another on its way
once the cash is available.

Have a great day.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Aug 27, 2020 at 6:55 AM  wrote:

> Only 2 my revo and my double ended hybrid legacy made out of 3 or 4 mills
> bits
>
>
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Thursday, 27 August 2020 9:43 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: revo drive motor
>
>
>
> Nice job Bill.
>
> So how many Legacy's do you have hidden in that domain? lol
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Thu, Aug 27, 2020 at 6:04 AM  wrote:
>
> I finally mounted a drive motor to my revo today I’m sick of winding the
> handle also added more of my folding stops
>
>
>
> https://youtu.be/p2olosNXa80
>
>
>
> Bill
>
>
>
>
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
>
> Virus-free. www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d67c61%24c2770420%2447650c60%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/01d67c61%24c2770420%2447650c60%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF60QJM4cECohGjk%2BY9ctjsunCiyRJ3o3U7kVeZ0PWs-g%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF60QJM4cECohGjk%2BY9ctjsunCiyRJ3o3U7kVeZ0PWs-g%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000a01d67c68%24fd326670%24f7973350%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000a01d67c68%24fd326670%24f7973350%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGugi%2BS8f0phDwppkL5XRQj%2B%3Do5dFVVOzHyGY-WuH%2BWdQ%40mail.gmail.com.

RE: revo drive motor

2020-08-27 Thread bulkeley 
Only 2 my revo and my double ended hybrid legacy made out of 3 or 4 mills bits

 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Thursday, 27 August 2020 9:43 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: revo drive motor

 

Nice job Bill. 

So how many Legacy's do you have hidden in that domain? lol 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Thu, Aug 27, 2020 at 6:04 AM mailto:bulke...@mmnet.com.au> > wrote:

I finally mounted a drive motor to my revo today I’m sick of winding the handle 
also added more of my folding stops

 

https://youtu.be/p2olosNXa80

 

Bill

 

 


 
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
 

Virus-free.  
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d67c61%24c2770420%2447650c60%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/01d67c61%24c2770420%2447650c60%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF60QJM4cECohGjk%2BY9ctjsunCiyRJ3o3U7kVeZ0PWs-g%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF60QJM4cECohGjk%2BY9ctjsunCiyRJ3o3U7kVeZ0PWs-g%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .



-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000a01d67c68%24fd326670%24f7973350%24%40mmnet.com.au.

Re: revo drive motor

2020-08-27 Thread Tim Ziegler 
Nice job Bill.
So how many Legacy's do you have hidden in that domain? lol
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Aug 27, 2020 at 6:04 AM  wrote:

> I finally mounted a drive motor to my revo today I’m sick of winding the
> handle also added more of my folding stops
>
>
>
> https://youtu.be/p2olosNXa80
>
>
>
> Bill
>
>
>
>
> 
>  Virus-free.
> www.avast.com
> 
> <#m_7353428273616878051_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d67c61%24c2770420%2447650c60%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF60QJM4cECohGjk%2BY9ctjsunCiyRJ3o3U7kVeZ0PWs-g%40mail.gmail.com.

revo drive motor

2020-08-27 Thread bulkeley 
I finally mounted a drive motor to my revo today I'm sick of winding the
handle also added more of my folding stops

 

https://youtu.be/p2olosNXa80

 

Bill

 



-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d67c61%24c2770420%2447650c60%24%40mmnet.com.au.