[Libreoffice-bugs] [Bug 139332] UI: Expert Configuration doesn't show Ok/Cancel button
https://bugs.documentfoundation.org/show_bug.cgi?id=139332 --- Comment #3 from Jambunathan K --- I am on a Dell laptop. ~$ lshw -c display WARNING: you should run this program as super-user. *-display description: VGA compatible controller product: Atom Processor Z36xxx/Z37xxx Series Graphics & Display vendor: Intel Corporation physical id: 2 bus info: pci@:00:02.0 version: 0e width: 32 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:91 memory:d000-d03f memory:c000-cfff ioport:f080(size=8) memory:c-d WARNING: output may be incomplete or inaccurate, you should run this program as super-user. ~$ dmidecode | grep -A3 '^System Information' Command 'dmidecode' is available in '/usr/sbin/dmidecode' The command could not be located because '/usr/sbin' is not included in the PATH environment variable. This is most likely caused by the lack of administrative privileges associated with your user account. dmidecode: command not found ~$ sudo dmidecode | grep -A3 '^System Information' System Information Manufacturer: Dell Inc. Product Name: Inspiron 3551 Version: A05 -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139332] UI: Expert Configuration doesn't show Ok/Cancel button
https://bugs.documentfoundation.org/show_bug.cgi?id=139332 --- Comment #2 from Jambunathan K --- > I think there is a ok/cancel button which gets hidden the bottom panel > 'gnome-panel'. In the attached screenshot, you can see that I have moved the bottom panel of the 'gnome-panel' to the right to see if it makes difference. I still see that the form is "overflowing" the laptop display, and there is NO ok/cancel button -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139332] UI: Expert Configuration doesn't show Ok/Cancel button
https://bugs.documentfoundation.org/show_bug.cgi?id=139332 --- Comment #1 from Jambunathan K --- The issue is seen with LibreOfficeDev_7.2.0.0.alpha0_Linux_x86-64_deb master~2020-12-30_12.52.30_LibreOfficeDev_7.2.0.0.alpha0_Linux_x86-64_deb.tar.gz. I am sure that this bug is an OLD one. IIRC, I have seen this in stable LibreOffice 7.0 builds. ~$ uname -a Linux debian 5.9.0-5-amd64 #1 SMP Debian 5.9.15-1 (2020-12-17) x86_64 GNU/Linux ~$ dpkg -l | grep writer ii libreofficedev7.2-writer 7.2.0.0.alpha0-1 amd64Writer brand module for LibreOfficeDev 7.2.0.0.alpha0 ii lodevbasis7.2-writer 7.2.0.0.alpha0-1 amd64Writer module for LibreOfficeDev 7.2.0.0.alpha0 ~$ env | grep SESSION SESSION_MANAGER=local/debian:@/tmp/.ICE-unix/2393,unix/debian:/tmp/.ICE-unix/2393 GNOME_DESKTOP_SESSION_ID=this-is-deprecated DESKTOP_SESSION=gnome-flashback-metacity XDG_SESSION_DESKTOP=gnome-flashback-metacity XDG_SESSION_TYPE=x11 XDG_SESSION_CLASS=user GDMSESSION=gnome-flashback-metacity DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139331] Option to redact/ anonymizing file by replacing images by dummy or make them black (Sanitize media)
https://bugs.documentfoundation.org/show_bug.cgi?id=139331 Telesto changed: What|Removed |Added Keywords||needsUXEval CC||libreoffice-ux-advise@lists ||.freedesktop.org --- Comment #1 from Telesto --- Maybe as kind of redact function -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139332] New: UI: Expert Configuration doesn't show Ok/Cancel button
https://bugs.documentfoundation.org/show_bug.cgi?id=139332 Bug ID: 139332 Summary: UI: Expert Configuration doesn't show Ok/Cancel button Product: LibreOffice Version: 7.2.0.0.alpha0+ Master Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: medium Component: Writer Assignee: libreoffice-bugs@lists.freedesktop.org Reporter: kjambunat...@gmail.com Created attachment 168588 --> https://bugs.documentfoundation.org/attachment.cgi?id=168588=edit Expert Configuration doesn't show OK/Cancel button The attached screenshot shows the problem. 1) Go toTools – Options – LibreOffice – Advanced – Open Expert Configuration 2) search for the string 'prettyprinting' (without quotes). You will be presented with /org.openoffice.Office.Common/Save/Document PrettyPrinting 3) Toggle the value from 'false' to 'true', for example. 4) Close the window. 5) Repeat (1) and (2) above to verify if the new value is saved. 6) Note that new changes are NOT saved. I think there is a ok/cancel button which gets hidden the bottom panel 'gnome-panel'. This bug is similar to the other recently closed bug https://bugs.documentfoundation.org/show_bug.cgi?id=130275 -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139331] New: Option to redact/ anonymizing file by replacing images by dummy or make them black (Sanitize media)
https://bugs.documentfoundation.org/show_bug.cgi?id=139331 Bug ID: 139331 Summary: Option to redact/ anonymizing file by replacing images by dummy or make them black (Sanitize media) Product: LibreOffice Version: 7.2.0.0.alpha0+ Master Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: medium Component: Writer Assignee: libreoffice-bugs@lists.freedesktop.org Reporter: tele...@surfxs.nl Description: Option to redact/ anonymizing file by replacing images by dummy or make them black Steps to Reproduce: certain bug require anonymizing, but also contain images Actual Results: Not possible. see https://wiki.documentfoundation.org/QA/Bugzilla/Sanitizing_Files_Before_Submission Expected Results: A function? Reproducible: Always User Profile Reset: No Additional Info: Version: 7.1.0.0.alpha1+ Build ID: c784b3da15102caf1022e83371863a86766e69cd CPU threads: 4; OS: Mac OS X 10.12.6; UI render: default; VCL: osx Locale: nl-NL (nl_NL.UTF-8); UI: en-US Calc: threaded -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139325] LO writer hangs/crashes--can't access my large ODT data file
https://bugs.documentfoundation.org/show_bug.cgi?id=139325 --- Comment #6 from Telesto --- You could try opening the file in safe-mode with the older version (or newer) help -> safe mode Or copy paste the content into new document.. this sometimes helps.. The last solution might be sending to specific person (release engineer) or attempting to anonymize the file, buts no help for images -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139330] UI is unfriendly, opening a new layer instead of the last one when the layer tab list is full
https://bugs.documentfoundation.org/show_bug.cgi?id=139330 Telesto changed: What|Removed |Added CC||libreoffice-ux-advise@lists ||.freedesktop.org Keywords||needsUXEval -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 103683] PDF export mediabox trimbox cropbox bleedbox artbox
https://bugs.documentfoundation.org/show_bug.cgi?id=103683 --- Comment #22 from hamilton --- Liteblue is a broad-based resource which allows any Postal employee to obtain critically relevant information, such as payroll, health, benefits, and other careers. Liteblue is the official portal for United States Postal Service employees. Use liteblue usps gov to your Liteblue to manage work. https://liteblue.fun -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 76258] Filter by Colours in LibreOffice Calc - Enchancement
https://bugs.documentfoundation.org/show_bug.cgi?id=76258 --- Comment #26 from hamilton --- QuickPayPortal is one largest & world’s most famous medical bill paying online patient portal for the easiness of patients. The www.quickpayportal.com is also known as Patient Portal. quickpayportal has made online bill portion essentially less difficult. QuickPayPortal entrance is an online bill portion. https://quickpayportal.red -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 115817] Correct implementation or remove the Navigation toolbar (a GSOC 2009 contribution see bug 32869) (comment 3 for history and functional intent)
https://bugs.documentfoundation.org/show_bug.cgi?id=115817 --- Comment #41 from Jim Raykowski --- Here is effort to help improve the recency navigation feature by including additional cursor movements in the recency stack: https://gerrit.libreoffice.org/c/core/+/108529 -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 138951] Moving shape with text box in table splits text box and shape at certain points in DOCX
https://bugs.documentfoundation.org/show_bug.cgi?id=138951 QA Administrators changed: What|Removed |Added Keywords||bibisectRequest -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139296] Text font size changes when scrolling document with a mouse
https://bugs.documentfoundation.org/show_bug.cgi?id=139296 QA Administrators changed: What|Removed |Added Status|NEEDINFO|UNCONFIRMED Ever confirmed|1 |0 -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 138970] Maximum columns exceeded warning is shown while opening an MS Excel file via the SDK
https://bugs.documentfoundation.org/show_bug.cgi?id=138970 QA Administrators changed: What|Removed |Added Whiteboard|| QA:needsComment -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 138979] Dark-colored style previews lack contrast when using a dark theme
https://bugs.documentfoundation.org/show_bug.cgi?id=138979 QA Administrators changed: What|Removed |Added Whiteboard|| QA:needsComment -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 138974] Heading paragraph Style: Border color and width not maintained if no border set
https://bugs.documentfoundation.org/show_bug.cgi?id=138974 QA Administrators changed: What|Removed |Added Whiteboard|| QA:needsComment -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 138977] Automatic OCR text overlay in Libreoffice draw. Horrendously annoying and difficult to turn off
https://bugs.documentfoundation.org/show_bug.cgi?id=138977 QA Administrators changed: What|Removed |Added Whiteboard|| QA:needsComment -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 138947] Image + frame becoming empty white area when dragged to certain position after DOCX export
https://bugs.documentfoundation.org/show_bug.cgi?id=138947 QA Administrators changed: What|Removed |Added Whiteboard| QA:needsComment| -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 138967] Document scrolls when zooming into document with (large) image selected
https://bugs.documentfoundation.org/show_bug.cgi?id=138967 QA Administrators changed: What|Removed |Added Whiteboard|| QA:needsComment -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139325] LO writer hangs/crashes--can't access my large ODT data file
https://bugs.documentfoundation.org/show_bug.cgi?id=139325 --- Comment #5 from QA Administrators --- [Automated Action] NeedInfo-To-Unconfirmed -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 138966] Version 7.0.3.1 does not attach diacritics when we use Insert Special Character for Sanskrit Devanagari fonts
https://bugs.documentfoundation.org/show_bug.cgi?id=138966 QA Administrators changed: What|Removed |Added Whiteboard|| QA:needsComment -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 138247] Calc UI: Make the comment UI more consistent
https://bugs.documentfoundation.org/show_bug.cgi?id=138247 QA Administrators changed: What|Removed |Added Ever confirmed|1 |0 Status|NEEDINFO|UNCONFIRMED -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139325] LO writer hangs/crashes--can't access my large ODT data file
https://bugs.documentfoundation.org/show_bug.cgi?id=139325 QA Administrators changed: What|Removed |Added Ever confirmed|1 |0 Status|NEEDINFO|UNCONFIRMED -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 138247] Calc UI: Make the comment UI more consistent
https://bugs.documentfoundation.org/show_bug.cgi?id=138247 --- Comment #5 from QA Administrators --- [Automated Action] NeedInfo-To-Unconfirmed -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139296] Text font size changes when scrolling document with a mouse
https://bugs.documentfoundation.org/show_bug.cgi?id=139296 --- Comment #6 from QA Administrators --- [Automated Action] NeedInfo-To-Unconfirmed -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 133587] Following the update of W10 Libre Office crashes and stop working. Need to restart the computer
https://bugs.documentfoundation.org/show_bug.cgi?id=133587 --- Comment #4 from QA Administrators --- Dear MIRA, Please read this message in its entirety before proceeding. Your bug report is being closed as INSUFFICIENTDATA due to inactivity and a lack of information which is needed in order to accurately reproduce and confirm the problem. We encourage you to retest your bug against the latest release. If the issue is still present in the latest stable release, we need the following information (please ignore any that you've already provided): a) Provide details of your system including your operating system and the latest version of LibreOffice that you have confirmed the bug to be present b) Provide easy to reproduce steps – the simpler the better c) Provide any test case(s) which will help us confirm the problem d) Provide screenshots of the problem if you think it might help e) Read all comments and provide any requested information Once all of this is done, please set the bug back to UNCONFIRMED and we will attempt to reproduce the issue. Please do not: a) respond via email b) update the version field in the bug or any of the other details on the top section of our bug tracker Warm Regards, QA Team MassPing-NeedInfo-FollowUp -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 133587] Following the update of W10 Libre Office crashes and stop working. Need to restart the computer
https://bugs.documentfoundation.org/show_bug.cgi?id=133587 QA Administrators changed: What|Removed |Added Status|NEEDINFO|RESOLVED Resolution|--- |INSUFFICIENTDATA -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 133495] crash on using scrollbar "Object is nonfunctional" (MacOS Catalina)
https://bugs.documentfoundation.org/show_bug.cgi?id=133495 --- Comment #10 from QA Administrators --- Dear Georg, Please read this message in its entirety before proceeding. Your bug report is being closed as INSUFFICIENTDATA due to inactivity and a lack of information which is needed in order to accurately reproduce and confirm the problem. We encourage you to retest your bug against the latest release. If the issue is still present in the latest stable release, we need the following information (please ignore any that you've already provided): a) Provide details of your system including your operating system and the latest version of LibreOffice that you have confirmed the bug to be present b) Provide easy to reproduce steps – the simpler the better c) Provide any test case(s) which will help us confirm the problem d) Provide screenshots of the problem if you think it might help e) Read all comments and provide any requested information Once all of this is done, please set the bug back to UNCONFIRMED and we will attempt to reproduce the issue. Please do not: a) respond via email b) update the version field in the bug or any of the other details on the top section of our bug tracker Warm Regards, QA Team MassPing-NeedInfo-FollowUp -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 133495] crash on using scrollbar "Object is nonfunctional" (MacOS Catalina)
https://bugs.documentfoundation.org/show_bug.cgi?id=133495 QA Administrators changed: What|Removed |Added Resolution|--- |INSUFFICIENTDATA Status|NEEDINFO|RESOLVED -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 130723] FORMATTING:hyperlinks broken into 2 after saving
https://bugs.documentfoundation.org/show_bug.cgi?id=130723 --- Comment #14 from QA Administrators --- Dear VincentYu, This bug has been in NEEDINFO status with no change for at least 6 months. Please provide the requested information as soon as possible and mark the bug as UNCONFIRMED. Due to regular bug tracker maintenance, if the bug is still in NEEDINFO status with no change in 30 days the QA team will close the bug as INSUFFICIENTDATA due to lack of needed information. For more information about our NEEDINFO policy please read the wiki located here: https://wiki.documentfoundation.org/QA/Bugzilla/Fields/Status/NEEDINFO If you have already provided the requested information, please mark the bug as UNCONFIRMED so that the QA team knows that the bug is ready to be confirmed. Thank you for helping us make LibreOffice even better for everyone! Warm Regards, QA Team MassPing-NeedInfo-Ping -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 134474] not able to type kannada unicode some words like ಯರ್ರಿಸ್ವಾಮಿ
https://bugs.documentfoundation.org/show_bug.cgi?id=134474 --- Comment #2 from QA Administrators --- Dear Director dsert, This bug has been in NEEDINFO status with no change for at least 6 months. Please provide the requested information as soon as possible and mark the bug as UNCONFIRMED. Due to regular bug tracker maintenance, if the bug is still in NEEDINFO status with no change in 30 days the QA team will close the bug as INSUFFICIENTDATA due to lack of needed information. For more information about our NEEDINFO policy please read the wiki located here: https://wiki.documentfoundation.org/QA/Bugzilla/Fields/Status/NEEDINFO If you have already provided the requested information, please mark the bug as UNCONFIRMED so that the QA team knows that the bug is ready to be confirmed. Thank you for helping us make LibreOffice even better for everyone! Warm Regards, QA Team MassPing-NeedInfo-Ping -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 129031] distorted lines
https://bugs.documentfoundation.org/show_bug.cgi?id=129031 --- Comment #18 from QA Administrators --- Dear Jochen, This bug has been in NEEDINFO status with no change for at least 6 months. Please provide the requested information as soon as possible and mark the bug as UNCONFIRMED. Due to regular bug tracker maintenance, if the bug is still in NEEDINFO status with no change in 30 days the QA team will close the bug as INSUFFICIENTDATA due to lack of needed information. For more information about our NEEDINFO policy please read the wiki located here: https://wiki.documentfoundation.org/QA/Bugzilla/Fields/Status/NEEDINFO If you have already provided the requested information, please mark the bug as UNCONFIRMED so that the QA team knows that the bug is ready to be confirmed. Thank you for helping us make LibreOffice even better for everyone! Warm Regards, QA Team MassPing-NeedInfo-Ping -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 127190] FILESAVE: math crashes when export to pdf (steps: comment 8, not always reproducible)
https://bugs.documentfoundation.org/show_bug.cgi?id=127190 --- Comment #29 from QA Administrators --- Dear VincentYu, This bug has been in NEEDINFO status with no change for at least 6 months. Please provide the requested information as soon as possible and mark the bug as UNCONFIRMED. Due to regular bug tracker maintenance, if the bug is still in NEEDINFO status with no change in 30 days the QA team will close the bug as INSUFFICIENTDATA due to lack of needed information. For more information about our NEEDINFO policy please read the wiki located here: https://wiki.documentfoundation.org/QA/Bugzilla/Fields/Status/NEEDINFO If you have already provided the requested information, please mark the bug as UNCONFIRMED so that the QA team knows that the bug is ready to be confirmed. Thank you for helping us make LibreOffice even better for everyone! Warm Regards, QA Team MassPing-NeedInfo-Ping -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 122160] Dragging text on Impress leaves marks behind
https://bugs.documentfoundation.org/show_bug.cgi?id=122160 --- Comment #3 from QA Administrators --- Dear Rodrigo Garcia Martin, To make sure we're focusing on the bugs that affect our users today, LibreOffice QA is asking bug reporters and confirmers to retest open, confirmed bugs which have not been touched for over a year. There have been thousands of bug fixes and commits since anyone checked on this bug report. During that time, it's possible that the bug has been fixed, or the details of the problem have changed. We'd really appreciate your help in getting confirmation that the bug is still present. If you have time, please do the following: Test to see if the bug is still present with the latest version of LibreOffice from https://www.libreoffice.org/download/ If the bug is present, please leave a comment that includes the information from Help - About LibreOffice. If the bug is NOT present, please set the bug's Status field to RESOLVED-WORKSFORME and leave a comment that includes the information from Help - About LibreOffice. Please DO NOT Update the version field Reply via email (please reply directly on the bug tracker) Set the bug's Status field to RESOLVED - FIXED (this status has a particular meaning that is not appropriate in this case) If you want to do more to help you can test to see if your issue is a REGRESSION. To do so: 1. Download and install oldest version of LibreOffice (usually 3.3 unless your bug pertains to a feature added after 3.3) from https://downloadarchive.documentfoundation.org/libreoffice/old/ 2. Test your bug 3. Leave a comment with your results. 4a. If the bug was present with 3.3 - set version to 'inherited from OOo'; 4b. If the bug was not present in 3.3 - add 'regression' to keyword Feel free to come ask questions or to say hello in our QA chat: https://kiwiirc.com/nextclient/irc.freenode.net/#libreoffice-qa Thank you for helping us make LibreOffice even better for everyone! Warm Regards, QA Team MassPing-UntouchedBug -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139191] charts with primary and secondary charts same main lines
https://bugs.documentfoundation.org/show_bug.cgi?id=139191 --- Comment #6 from paulyste...@web.de --- Yes, I see here this feature. It should be automatically calculated, but also with the possibility of its own count value in the options windows of the y-axes. But the max value or the step size should also be corrected by hand like now. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139330] New: UI is unfriendly, opening a new layer instead of the last one when the layer tab list is full
https://bugs.documentfoundation.org/show_bug.cgi?id=139330 Bug ID: 139330 Summary: UI is unfriendly, opening a new layer instead of the last one when the layer tab list is full Product: LibreOffice Version: 7.0.3.1 release Hardware: x86-64 (AMD64) OS: Windows (All) Status: UNCONFIRMED Severity: minor Priority: medium Component: Draw Assignee: libreoffice-bugs@lists.freedesktop.org Reporter: chris.cows...@gmail.com Description: I work with a lot of layers, sometimes too many for the window of layer tabs. When the tab window is full, if I click on the rightmost tab it slides left and shows me a default new layer. That's OK, but if I doubleclick on the rightmost tab, instead of opening the dialogue to let me alter its visibility or protected status, it creates and opens the default new layer. The result is opening a dialogue for an existing layer becomes a click-pause-shiftleft-doubleclick process for the last layer in the list. It would seem more intuitive for the creation and renaming of a new layer to be the less convenient process of the two. Not urgent, obviously. Steps to Reproduce: 1.Use as many layers as will fill the tab space available 2.Right click on the right-most layer tab & protect it 3.Notice that you have just protected a brand new layer, not the one you meant to. Actual Results: 3 above Expected Results: Expected the layer selected to be protected Reproducible: Always User Profile Reset: No Additional Info: [Information automatically included from LibreOffice] Locale: en-GB Module: DrawingDocument [Information guessed from browser] OS: Windows (All) OS is 64bit: no? Yes it is AMD64. Edge is lying gerrit.libreoffice.org / core / d7547858d014d4cf69878db179d326fc3483e082 -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139230] Two images disappear on copy/paste if anchored to single position without a character present
https://bugs.documentfoundation.org/show_bug.cgi?id=139230 neuf...@gmail.com changed: What|Removed |Added Ever confirmed|0 |1 Version|7.2.0.0.alpha0+ Master |7.0.3.1 release Status|UNCONFIRMED |NEW --- Comment #2 from neuf...@gmail.com --- Could reproduce the bug in: Version: 7.0.3.1 (x64) Build ID: d7547858d014d4cf69878db179d326fc3483e082 CPU threads: 4; OS: Windows 10.0 Build 19041; UI render: Skia/Raster; VCL: win Locale: en-US (en_US); UI: en-US Calc: CL Also in: Version: 7.2.0.0.alpha0+ (x64) Build ID: f72a5fd03ddfa94b074b28cf1259284f727139f0 CPU threads: 4; OS: Windows 10.0 Build 19041; UI render: Skia/Raster; VCL: win Locale: en-US (en_US); UI: en-US Calc: CL -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139325] LO writer hangs/crashes--can't access my large ODT data file
https://bugs.documentfoundation.org/show_bug.cgi?id=139325 --- Comment #4 from Hal --- I can't disclose content of my large document because it's confidential. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139325] LO writer hangs/crashes--can't access my large ODT data file
https://bugs.documentfoundation.org/show_bug.cgi?id=139325 --- Comment #3 from Hal --- Here is LibreOffice's info on the crash as displayed on my computer: Problem signature: Problem Event Name: AppHangB1 Application Name: soffice.bin Application Version: 7.1.0.1 Application Timestamp:5fe0aea6 Hang Signature: 41d1 Hang Type:0 OS Version: 6.1.7601.2.1.0.256.1 Locale ID:1033 Additional Hang Signature 1: 41d14a07f412abb51e7c59723139db62 Additional Hang Signature 2: 2807 Additional Hang Signature 3: 28072662d24236c2074800053da32aef Additional Hang Signature 4: 41d1 Additional Hang Signature 5: 41d14a07f412abb51e7c59723139db62 Additional Hang Signature 6: 2807 Additional Hang Signature 7: 28072662d24236c2074800053da32aef Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 97075] GL: flicker creating calc window ...
https://bugs.documentfoundation.org/show_bug.cgi?id=97075 --- Comment #5 from Leyan --- *** Bug 97074 has been marked as a duplicate of this bug. *** -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 97074] flicker creating window ...
https://bugs.documentfoundation.org/show_bug.cgi?id=97074 Leyan changed: What|Removed |Added Resolution|FIXED |DUPLICATE --- Comment #1 from Leyan --- *** This bug has been marked as a duplicate of bug 97075 *** -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139314] Bugzilla / account registration too vulnerable for spammers
https://bugs.documentfoundation.org/show_bug.cgi?id=139314 --- Comment #3 from Buovjaga --- (In reply to Matthijs from comment #2) > (In reply to Buovjaga from comment #1) > > Bugzilla 6 will have antispam functionality > > Thanks Buovjaga for your response. Great that Bugzilla 6 will have antispam > functionality. Any idea when Bugzilla 6 will be implemented? It's a long and painful story (at least how I feel after all this waiting). BZ 6 has been ready for a long time, but tangled in Mozilla's fork. Now, thanks to the harmonising efforts of very dedicated individuals over the years, both in hired & volunteer capacity, it is close to a release. The release is basically waiting for the final polish and validation of this database schema migration code: https://github.com/bugzilla/harmony/pull/52 -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139272] Clear formatting in table causes switch from Table Content style to Default formatting
https://bugs.documentfoundation.org/show_bug.cgi?id=139272 --- Comment #12 from V Stuart Foote --- (In reply to Sascha Z from comment #11) > Just out of curiosity: > Why does LibO not use default paragraph style inside table cells on creation > time? It comes from what is defined in the 'standard' template, and there is actually some thought (bug 47295) to rework the templates so very little would end up with 'Default' PS. Which of course would require additional dev effort to better manage style defaults for fall back when styles by object type are 'cleared'. Styled 'Table contents' are necessary bcz we now also have Table styles. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139328] example Euler-Lagrange equation is wrong
https://bugs.documentfoundation.org/show_bug.cgi?id=139328 --- Comment #3 from Jean-Baptiste Faure --- (In reply to Jean-Baptiste Faure from comment #2) > (In reply to Ming Hua from comment #1) > > Thanks for reporting, this mistake has been fixed in master: > > https://git.libreoffice.org/core/+/ad8485ebe11396aaac68095ef9eec819de6af26c > > > > It probably should be backported for 7.1 though. > > Yes, I just found this commit. > > @Laurent BP: is it possible to backport your commit to 7.0? > > Best regards. JBF Sorry, I meant 7.1. Best regards. JBF -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139325] LO writer hangs/crashes--can't access my large ODT data file
https://bugs.documentfoundation.org/show_bug.cgi?id=139325 --- Comment #2 from Hal --- 1. I can't open my ODT file. When I try to open it, LO Writer simply hangs. 2. I can't send you my ODT data file because it is confidential preventing me from disclosing its content. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139323] Calc stopped calculating
https://bugs.documentfoundation.org/show_bug.cgi?id=139323 Ming Hua changed: What|Removed |Added Ever confirmed|0 |1 CC||ming.v@qq.com Status|UNCONFIRMED |NEEDINFO --- Comment #1 from Ming Hua --- There is a switch in Calc that make it show formula instead of the result, and can be turned on/off via menu View > Show Formula or keyboard shortcut Ctrl+` (` is the key to the left of 1 key on an ordinary English keyboard). Since you can not reproduce the problem, it's likely that you pressed the shortcut by accident and turned on this "show formula instead of result" feature. It does not seem to be saved when closing LibreOffice, which explains why saving document, closing and reopening fixed your problem. If you disagree but can not give exact procedures to reproduce the problem, I'm afraid we can't help you much and have to close this bug. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139328] example Euler-Lagrange equation is wrong
https://bugs.documentfoundation.org/show_bug.cgi?id=139328 Jean-Baptiste Faure changed: What|Removed |Added CC||jumbo4...@yahoo.fr --- Comment #2 from Jean-Baptiste Faure --- (In reply to Ming Hua from comment #1) > Thanks for reporting, this mistake has been fixed in master: > https://git.libreoffice.org/core/+/ad8485ebe11396aaac68095ef9eec819de6af26c > > It probably should be backported for 7.1 though. Yes, I just found this commit. @Laurent BP: is it possible to backport your commit to 7.0? Best regards. JBF -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139272] Clear formatting in table causes switch from Table Content style to Default formatting
https://bugs.documentfoundation.org/show_bug.cgi?id=139272 --- Comment #11 from Sascha Z --- Just out of curiosity: Why does LibO not use default paragraph style inside table cells on creation time? -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139074] CRASH on Paste from clipboard into dialog or other floating window, paste to document canvas is fine; Windows only?
https://bugs.documentfoundation.org/show_bug.cgi?id=139074 Ming Hua changed: What|Removed |Added CC||bright.em...@gmail.com --- Comment #21 from Ming Hua --- *** Bug 139327 has been marked as a duplicate of this bug. *** -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139327] Crash when copy/paste any text into 'Rename sheet' dialogue box
https://bugs.documentfoundation.org/show_bug.cgi?id=139327 Ming Hua changed: What|Removed |Added Resolution|--- |DUPLICATE CC||ming.v@qq.com Status|UNCONFIRMED |RESOLVED --- Comment #1 from Ming Hua --- Thanks for reporting. This is a known issue and has been reported as bug 139074, therefore I'm marking this as a DUPLICATE. *** This bug has been marked as a duplicate of bug 139074 *** -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139328] example Euler-Lagrange equation is wrong
https://bugs.documentfoundation.org/show_bug.cgi?id=139328 Ming Hua changed: What|Removed |Added Whiteboard||target:7.2.0 CC||ming.v@qq.com Ever confirmed|0 |1 Status|UNCONFIRMED |NEW --- Comment #1 from Ming Hua --- Thanks for reporting, this mistake has been fixed in master: https://git.libreoffice.org/core/+/ad8485ebe11396aaac68095ef9eec819de6af26c It probably should be backported for 7.1 though. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139329] Hatching and pattern fill options present on objects but not for page background
https://bugs.documentfoundation.org/show_bug.cgi?id=139329 mwtjunkm...@gmail.com changed: What|Removed |Added CC||mwtjunkm...@gmail.com --- Comment #1 from mwtjunkm...@gmail.com --- Created attachment 168584 --> https://bugs.documentfoundation.org/attachment.cgi?id=168584=edit screen capture of sidebar Difference between setting the fill on an object versus the page background. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139296] Text font size changes when scrolling document with a mouse
https://bugs.documentfoundation.org/show_bug.cgi?id=139296 --- Comment #5 from spokanemagn...@gmail.com --- (In reply to V Stuart Foote from comment #4) > What you show is screen tearing, extending horizontally across entire lines > of text as the document canvas is redrawn with scrolling (by mouse, touch > pad, or cursor arrows). > > It has nothing to do with font metrics and the rendering of the fonts. > Likewise it probably has nothing to do with your mouse hardware & drivers > (the scroll size is not read from your mouse settings, rather from LO > program settings). > > Skia rendering is enabled by default with the Windows builds. You must > explicitly disable it to revert to "default" GDI based rendering by CPU > (with optional CPU controlled Hardware Acceleration). > > We need to know if the tearing continues when you eliminate Skia and switch > to GDI rendering. > > Also, we need to know your graphics hardware, so before disabling Skia--with > Vulkan rendering enabled--copy the contents of the Skia.log from > %APPDATA%\LibreOFfice\4\cache\skia.log and if present the opengl_device.log Ah, the term tearing explains it perfectly. Why I didn't think of that term, I don't know. I found another possible bug in that when I checked for updates, it would tell me I am current--but I found out that there was a newer version (7.0.4.2), so I updated, but that did not fix the problem. I also tried running it as an administrator (even though I only have one account, an administrator account), but that did not fix the problem either. I thought I was onto something when I deselected the Math baseline alignment under Tools>Options>LO Writer>Formatting Aids, but this morning I checked and the checkbox was once again selected--and the tearing problem was back, even though I had pressed Apply and OK the evening before. The %APPDATA%\LO\4\cache\skia.log file that you requested only contained these two lines of text: RenderMethod: raster Compiler: Clang There was on opengl_device.log file. After the change to deselect Skia, which I had done before without it fixing the problem, the %APPDATA%\...\skia.log file contained the following: DriverVersion: 20.19.15.5107 DriverDate: 11-15-2019 DeviceID: PCI\VEN_8086_22B1_10C01043_21 AdapterVendorID: 0x8086 AdapterDeviceID: 0x22b1 AdapterSubsysID: 0x10c01043 DeviceKey: System\CurrentControlSet\Control\Video\{BCDC4E8B-D8FD-11EA-918F-B232891AD31F}\ DeviceString: Intel(R) HD Graphics The dramatic difference in file size makes me think I might have messed up when I copied the file before the skia change (perhaps LO has to be open at the time, and I cannot remember if I had opened it before I hunted for the files you requested. So, I made the change from Skia to using the hardware accelerator, and the Math baseline alignment checkbox is again selected, and I it still fails. I did notice another clue, and that is that if I turn off the Toggle Automatic Spell Checking, then turn it right back on, the tearing text goes away without having to scroll the page up or down passed the torn text and then back again. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139329] New: Hatching and pattern fill options present on objects but not for page background
https://bugs.documentfoundation.org/show_bug.cgi?id=139329 Bug ID: 139329 Summary: Hatching and pattern fill options present on objects but not for page background Product: LibreOffice Version: 7.2.0.0.alpha0+ Master Hardware: x86-64 (AMD64) OS: Windows (All) Status: UNCONFIRMED Severity: normal Priority: medium Component: Draw Assignee: libreoffice-bugs@lists.freedesktop.org Reporter: mwtjunkm...@gmail.com Description: Selecting Hatching or Pattern for a page background does not provide the various types of fills for these options. They're available for objects. Steps to Reproduce: 1. Launch Microsoft Windows LibreOffice 7.2.0.0 2. Create a new Draw document 3. Select either Hatching or Pattern for the background option Actual Results: No hatching or pattern fill options appear after step 3. Expected Results: Hatching or pattern fill options should appear after step 3. Reproducible: Always User Profile Reset: No Additional Info: Version: 7.2.0.0.alpha0+ (x64) Build ID: c0eee433e079d8e3413f4691607e075b99af92b0 CPU threads: 8; OS: Windows 10.0 Build 21277; UI render: Skia/Vulkan; VCL: win Locale: en-US (en_US); UI: en-US Calc: CL -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139328] New: example Euler-Lagrange equation is wrong
https://bugs.documentfoundation.org/show_bug.cgi?id=139328 Bug ID: 139328 Summary: example Euler-Lagrange equation is wrong Product: LibreOffice Version: 7.1.0.1 rc Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: medium Component: Formula Editor Assignee: libreoffice-bugs@lists.freedesktop.org Reporter: jbfa...@libreoffice.org Description: The right parenthesis in the example "Euler-Lagrange equation" is misplaced Steps to Reproduce: 1. Open Math module 2. in the left panel choose example 3. look at Euler-Lagrange equation Actual Results: d over dt left( {partial L}over{partial dot q} = {partial L}over{partial q} right) Expected Results: The right parenthesis must be before the equal sign: d over dt left( {partial L}over{partial dot q} right) = {partial L}over{partial q} Reproducible: Always User Profile Reset: No Additional Info: Version: 7.1.0.1.0+ Build ID: 3c44c403791754207142c60183a118c323b9c297 CPU threads: 4; OS: Linux 4.15; UI render: default; VCL: gtk3 Locale: fr-FR (fr_FR.UTF-8); UI: fr-FR Ubuntu_18.04_x86-64 Calc: threaded -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139316] [WIKIHELP] Wrong use of double quotation marks in sample formula
https://bugs.documentfoundation.org/show_bug.cgi?id=139316 sdc.bla...@youmail.dk changed: What|Removed |Added Assignee|libreoffice-b...@lists.free |sdc.bla...@youmail.dk |desktop.org | -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139261] Image anchor jumping unexpected position
https://bugs.documentfoundation.org/show_bug.cgi?id=139261 mulla.tasa...@gmail.com changed: What|Removed |Added Status|UNCONFIRMED |NEW CC||mulla.tasa...@gmail.com Ever confirmed|0 |1 --- Comment #2 from mulla.tasa...@gmail.com --- Thank you for reporting the bug. I can confirm that the bug is present in Version: 7.0.3.1 (x64) Build ID: d7547858d014d4cf69878db179d326fc3483e082 CPU threads: 4; OS: Windows 6.3 Build 9600; UI render: Skia/Raster; VCL: win Locale: en-US (en_US); UI: en-US Calc: CL Version: 7.2.0.0.alpha0+ (x64) Build ID: 761a672d62df1891b9f4f367a499b220ab2b33fa CPU threads: 4; OS: Windows 6.3 Build 9600; UI render: Skia/Raster; VCL: win Locale: en-US (en_US); UI: en-US Calc: CL -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 70759] Apply Style toolbar "Clear formatting" action sets "Text Body" instead of "Default Style" from LO 4.1+
https://bugs.documentfoundation.org/show_bug.cgi?id=70759 V Stuart Foote changed: What|Removed |Added See Also||https://bugs.documentfounda ||tion.org/show_bug.cgi?id=13 ||9272 -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139272] Clear formatting in table causes switch from Table Content style to Default formatting
https://bugs.documentfoundation.org/show_bug.cgi?id=139272 V Stuart Foote changed: What|Removed |Added See Also||https://bugs.documentfounda ||tion.org/show_bug.cgi?id=70 ||759 Resolution|--- |NOTABUG Keywords|needsUXEval | CC|libreoffice-ux-advise@lists | |.freedesktop.org| Status|UNCONFIRMED |RESOLVED --- Comment #10 from V Stuart Foote --- (In reply to Dave Barton from comment #9) > (In reply to V Stuart Foote from comment #8) > > This is not about clearing "Direct Manual Formatting eg. Ctrl+M", it is > about "Clear Formatting" of styles for one or more selected paragraphs, > using the paragraph styles drop down list in the formatting toolbar. See > point 3 of comment 3. > > The point being that a paragraph within a cell is exactly the same as a > paragraph in any other element of of a Writer document. > > What is being asked for is to change a function of the software that has > existed (with a minor refinement bug 70759) for over 20 years. Oh, sorry. From the 'Set Paragraph Style' listbox, we are not 'Clear Formatting' we are actually applying a default paragraph style. In that case, taking each of the Paragraph objects held in cells back to 'Default paragraph style' is reasonable as it is the only way to assure consistency--and effectively apply a new style. As described resolving the see also bug 70759. It would be much harder to reliably parse the current source template and divine what default style should be applied. Use case here to get back to 'Table Contents', would be no different than what was fixed for bug 70759 where 'Text body' was being applied. So for consistent results, work flows should include a "clear" that reverts to 'Default Paragraph style', and a second style action to apply the final style to selected paragraphs. Agree with the NAB and no change. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139314] Bugzilla / account registration too vulnerable for spammers
https://bugs.documentfoundation.org/show_bug.cgi?id=139314 --- Comment #2 from Matthijs --- (In reply to Buovjaga from comment #1) > Bugzilla 6 will have antispam functionality Thanks Buovjaga for your response. Great that Bugzilla 6 will have antispam functionality. Any idea when Bugzilla 6 will be implemented? -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139327] New: Crash when copy/paste any text into 'Rename sheet' dialogue box
https://bugs.documentfoundation.org/show_bug.cgi?id=139327 Bug ID: 139327 Summary: Crash when copy/paste any text into 'Rename sheet' dialogue box Product: LibreOffice Version: 7.2.0.0.alpha0+ Master Hardware: x86-64 (AMD64) OS: Windows (All) Status: UNCONFIRMED Severity: normal Priority: medium Component: Calc Assignee: libreoffice-bugs@lists.freedesktop.org Reporter: bright.em...@gmail.com Description: LO crashes every time I try to rename a sheet in Calc by pasting anything into the renaming dialogue box. It does not matter if OpenCL is enabled or not. Steps to Reproduce: 1. Open Calc and start a new document 2. Double-click of the sheet's name to bring up the 'Rename sheet' dialogue box 3. Paste anything you copied elsewhere such as the word "Alice" into the dialogue box Actual Results: LO crashes immediately. Expected Results: The pasted text must show in the dialogue box. Reproducible: Always User Profile Reset: No Additional Info: [Information automatically included from LibreOffice] Locale: en-US Module: SpreadsheetDocument [Information guessed from browser] OS: Windows (All) OS is 64bit: yes Processor Intel(R) Core(TM) i5-7400 CPU @ 3.00GHz 3.00 GHz Installed RAM 12.0 GB System type 64-bit operating system, x64-based processor Edition Windows 10 Home Version 20H2 Installed on2020-06-05 OS build19042.685 Experience Windows Feature Experience Pack 120.2212.551.0 -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139266] Page border not exported into DOCX
https://bugs.documentfoundation.org/show_bug.cgi?id=139266 --- Comment #5 from Telesto --- (In reply to NISZ LibreOffice Team from comment #4) > But there is a lot of problems with this one. There is a section followed by > a text:soft-page-break - how does even one create that in Writer? For a difference a self-made doc. Made by the following: Insert -> Section -> Column Tab -> Click Two Column template -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139325] LO writer hangs/crashes--can't access my large ODT data file
https://bugs.documentfoundation.org/show_bug.cgi?id=139325 mulla.tasa...@gmail.com changed: What|Removed |Added Ever confirmed|0 |1 Status|UNCONFIRMED |NEEDINFO CC||mulla.tasa...@gmail.com --- Comment #1 from mulla.tasa...@gmail.com --- Thank you for reporting the bug. Please attach a sample document, as this makes it easier for us to verify the bug. I have set the bug's status to 'NEEDINFO'. Please change it back to 'UNCONFIRMED' once the requested document is provided. (Note that the attachment will be public, remove any sensitive information before attaching it. See the QA FAQ Wiki for further detail.) -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 137826] weird Heading 4
https://bugs.documentfoundation.org/show_bug.cgi?id=137826 Telesto changed: What|Removed |Added Resolution|FIXED |WORKSFORME CC||vstuart.fo...@utsa.edu --- Comment #7 from Telesto --- (In reply to TorrAB from comment #6) > (In reply to Telesto from comment #4) > > It's hidden direct formatting.. remove all direct formatting and it will > > work > > OK. But… what is ‘hidden direct formatting’? How/why would I do it if I > cannot see it? The style Inspector (LibreOffice 7.1) is able to show the issue. The C is formatted with a specific Direct Character formatting. However no clue how this exactly happened.. I think Selecting C.. Changing font size to say 16, and revert it back to 12. So more or less what's debated in bug 135871 Except in this case not about highlighting or bold, but font size -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139326] Crash if I "Use Wizard to Create Report"
https://bugs.documentfoundation.org/show_bug.cgi?id=139326 Tim changed: What|Removed |Added Resolution|--- |FIXED Status|UNCONFIRMED |RESOLVED -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 133092] [META] Crash bugs
https://bugs.documentfoundation.org/show_bug.cgi?id=133092 Bug 133092 depends on bug 135675, which changed state. Bug 135675 Summary: Crash opening Report containing an image in a placeholder control - macOS 10.13 specific https://bugs.documentfoundation.org/show_bug.cgi?id=135675 What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution|--- |FIXED -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 135675] Crash opening Report containing an image in a placeholder control - macOS 10.13 specific
https://bugs.documentfoundation.org/show_bug.cgi?id=135675 Tim changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution|--- |FIXED --- Comment #32 from Tim --- Just downloaded Version 7.0.4.2 and bug is solved!!! Thanks! -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139326] Crash if I "Use Wizard to Create Report"
https://bugs.documentfoundation.org/show_bug.cgi?id=139326 --- Comment #2 from Tim --- I've just downloaded Version 7.0.4.2 and seems to be solved! Now it works, but when I select the Table or Query, I have to hold down the mouse button to be able to select the right one. Also it's solved one of the other bugs, when tryingo to insert an image. Lets see if others are also solved. Thank you for your work! -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 130447] [META] DOCX (OOXML) section-related issues
https://bugs.documentfoundation.org/show_bug.cgi?id=130447 NISZ LibreOffice Team changed: What|Removed |Added Depends on||139266 Referenced Bugs: https://bugs.documentfoundation.org/show_bug.cgi?id=139266 [Bug 139266] Page border not exported into DOCX -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139266] Page border not exported into DOCX
https://bugs.documentfoundation.org/show_bug.cgi?id=139266 NISZ LibreOffice Team changed: What|Removed |Added CC||jl...@mail.com, ||libreoff...@nisz.hu See Also||https://bugs.documentfounda ||tion.org/show_bug.cgi?id=64 ||372 Keywords|bibisectRequest |bibisected, bisected Blocks||130447 --- Comment #4 from NISZ LibreOffice Team --- Border from the second page started to disappear at: https://cgit.freedesktop.org/libreoffice/core/commit/?id=a60b2f7c227709d27d6294558fd396557a9ffd20 author Justin Luth2016-07-04 21:39:37 +0300 committer Miklos Vajna 2016-07-08 07:24:10 + tdf#64372 docx import: don't ignore continuous section break Adding CC to: Justin Luth But there is a lot of problems with this one. There is a section followed by a text:soft-page-break - how does even one create that in Writer? Referenced Bugs: https://bugs.documentfoundation.org/show_bug.cgi?id=130447 [Bug 130447] [META] DOCX (OOXML) section-related issues -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 137826] weird Heading 4
https://bugs.documentfoundation.org/show_bug.cgi?id=137826 tor...@yahoo.com changed: What|Removed |Added Resolution|--- |FIXED Status|NEEDINFO|RESOLVED --- Comment #6 from tor...@yahoo.com --- (In reply to Telesto from comment #4) > It's hidden direct formatting.. remove all direct formatting and it will work OK. But… what is ‘hidden direct formatting’? How/why would I do it if I cannot see it? -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139324] Table of Contents Not Working Properly
https://bugs.documentfoundation.org/show_bug.cgi?id=139324 Jean-Baptiste Faure changed: What|Removed |Added Resolution|--- |WORKSFORME Status|UNCONFIRMED |RESOLVED CC||jbfa...@libreoffice.org --- Comment #2 from Jean-Baptiste Faure --- The bug is on your side: you did not use header styles in your document. https://help.libreoffice.org/latest/en-US/text/swriter/guide/indices_toc.html Closing as WorksForMe. Best regards. JBF -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139326] Crash if I "Use Wizard to Create Report"
https://bugs.documentfoundation.org/show_bug.cgi?id=139326 --- Comment #1 from Tim --- I've just downloaded Version 7.0.4.2 and seems to be solved! Now it works. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 122652] [META] Memory problems in LibreOffice
https://bugs.documentfoundation.org/show_bug.cgi?id=122652 Bug 122652 depends on bug 118339, which changed state. Bug 118339 Summary: Memory used for RTF paste is only released after document close https://bugs.documentfoundation.org/show_bug.cgi?id=118339 What|Removed |Added Status|NEEDINFO|RESOLVED Resolution|--- |WORKSFORME -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 118339] Memory used for RTF paste is only released after document close
https://bugs.documentfoundation.org/show_bug.cgi?id=118339 Telesto changed: What|Removed |Added Status|NEEDINFO|RESOLVED Resolution|--- |WORKSFORME --- Comment #3 from Telesto --- Lets close.. looks reasonably OK.. slowness more annoying -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 109040] [META] RTF paste special bugs and enhancements
https://bugs.documentfoundation.org/show_bug.cgi?id=109040 Bug 109040 depends on bug 118339, which changed state. Bug 118339 Summary: Memory used for RTF paste is only released after document close https://bugs.documentfoundation.org/show_bug.cgi?id=118339 What|Removed |Added Status|NEEDINFO|RESOLVED Resolution|--- |WORKSFORME -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 89606] [META] Table of Contents and Indexes bugs and enhancements
https://bugs.documentfoundation.org/show_bug.cgi?id=89606 Bug 89606 depends on bug 135241, which changed state. Bug 135241 Summary: Table of Contents: allow adjustment of space between text lines and page numbers https://bugs.documentfoundation.org/show_bug.cgi?id=135241 What|Removed |Added Status|NEEDINFO|RESOLVED Resolution|--- |WONTFIX -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 135241] Table of Contents: allow adjustment of space between text lines and page numbers
https://bugs.documentfoundation.org/show_bug.cgi?id=135241 Timur changed: What|Removed |Added Status|NEEDINFO|RESOLVED Resolution|--- |WONTFIX --- Comment #8 from Timur --- No response, so I close.. Anyway, this never was justified. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139321] [META] XLSX (OOXML) Image issues
https://bugs.documentfoundation.org/show_bug.cgi?id=139321 Thomas Lendo changed: What|Removed |Added Status|UNCONFIRMED |NEW CC||thomas.le...@gmail.com Ever confirmed|0 |1 -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139326] New: Crash if I "Use Wizard to Create Report"
https://bugs.documentfoundation.org/show_bug.cgi?id=139326 Bug ID: 139326 Summary: Crash if I "Use Wizard to Create Report" Product: LibreOffice Version: 7.0.3.1 release Hardware: All OS: Mac OS X (All) Status: UNCONFIRMED Severity: normal Priority: medium Component: Base Assignee: libreoffice-bugs@lists.freedesktop.org Reporter: woodf...@pobox.com Description: On an existing Database, with previous Reports I can execute, but not now creat a new Report with Wizard option. I can do it using "Creat Report in Design View" or copy and modify an existing one. Steps to Reproduce: 1.Open Base 2.Use Wizard to Create Report 3. Actual Results: Just clicking on "Use Wizard to Create Report" Expected Results: Have the Wizard going on Reproducible: Always User Profile Reset: Yes Additional Info: It happend allready on one o two previuos release of LibreOffice. I still suffer other crushes reported many months ago without solution. All after changing to embeden Firebird. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139272] Clear formatting in table causes switch from Table Content style to Default formatting
https://bugs.documentfoundation.org/show_bug.cgi?id=139272 --- Comment #9 from Dave Barton --- (In reply to V Stuart Foote from comment #8) This is not about clearing "Direct Manual Formatting eg. Ctrl+M", it is about "Clear Formatting" of styles for one or more selected paragraphs, using the paragraph styles drop down list in the formatting toolbar. See point 3 of comment 3. The point being that a paragraph within a cell is exactly the same as a paragraph in any other element of of a Writer document. What is being asked for is to change a function of the software that has existed (with a minor refinement bug 70759) for over 20 years. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 80430] [META] Documentation gap for new features
https://bugs.documentfoundation.org/show_bug.cgi?id=80430 Bug 80430 depends on bug 116381, which changed state. Bug 116381 Summary: Update Calc documentation for image handling improvements https://bugs.documentfoundation.org/show_bug.cgi?id=116381 What|Removed |Added Status|NEW |RESOLVED Resolution|--- |FIXED -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 116381] Update Calc documentation for image handling improvements
https://bugs.documentfoundation.org/show_bug.cgi?id=116381 Bala changed: What|Removed |Added Status|NEW |RESOLVED Resolution|--- |FIXED -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 80430] [META] Documentation gap for new features
https://bugs.documentfoundation.org/show_bug.cgi?id=80430 Bug 80430 depends on bug 84455, which changed state. Bug 84455 Summary: UI: HELP: Missing hint that {Edit ► Changes ► Record} will disable {Data ► Group and Outline ► Group} https://bugs.documentfoundation.org/show_bug.cgi?id=84455 What|Removed |Added Status|ASSIGNED|RESOLVED Resolution|--- |FIXED -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139325] New: LO writer hangs/crashes--can't access my large ODT data file
https://bugs.documentfoundation.org/show_bug.cgi?id=139325 Bug ID: 139325 Summary: LO writer hangs/crashes--can't access my large ODT data file Product: LibreOffice Version: 7.0.3.1 release Hardware: All OS: Windows (All) Status: UNCONFIRMED Severity: normal Priority: medium Component: Writer Assignee: libreoffice-bugs@lists.freedesktop.org Reporter: tech...@yahoo.com Description: FACTS: I'm using LO 7.0.3.1 writer on Win7 with approx 280 pages in a single ODT document. My ODT document contains written text, tables, and 250 or so resized medium resolution jpg images within Frames. My ODT data file is formatted in book-like fashion to perhaps be published. When I tried to add one more jpg image LO crashes (hangs). I can't access, update, or save my updated ODT file. LO doesn't crash when I open smaller LO data files. My LO ODT data file that crashes is approx 75MB. I reinstalled an earlier LO version and the problem still occurs. Interestingly, when I open a much smaller document containing images LO doesn't crash. For some strange reason it seems LO can't properly handle the large size and complexity of my .odt file. A few of my ODT images are 'compressed' using LO. Others are compressed using Photoshop. I don't want to abandon LO because it is a great software application that I have routinely used for years. QUESTIONS: (1) Is there a problem with LO7 (and earlier versions) with large writer ODT files containing many large images, captions, tablers, etc? (2) Any solutions for the hangup problem? (3) How do I recover my ODT file? NOTE: I can't disclose content of my large document because it's confidential. Actual Results: See above Description of crash description. Expected Results: It crashes/hangs. can't do anything with LO once it crashes. The bottom line shows "Loading document". Expected results: document should have been loaded and accessible for editing. Reproducible: Always User Profile Reset: Yes Additional Info: Version: 7.0.3.1 (x64) Build ID: d7547858d014d4cf69878db179d326fc3483e082 CPU threads: 8; OS: Windows 6.1 Service Pack 1 Build 7601; UI render: Skia/Raster; VCL: win Locale: en-US (en_US); UI: en-US Calc: threaded -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139196] Export macros saves the macros in ANSI format, so special characters replaced with '?'
https://bugs.documentfoundation.org/show_bug.cgi?id=139196 Zoltán Hegedüs changed: What|Removed |Added Severity|minor |normal --- Comment #4 from Zoltán Hegedüs --- This can cause data loss, so this is not a minor problem. But I can not set the severity, so please anybody set to major. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139324] Table of Contents Not Working Properly
https://bugs.documentfoundation.org/show_bug.cgi?id=139324 W Cole changed: What|Removed |Added Keywords||filter:odt -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139324] Table of Contents Not Working Properly
https://bugs.documentfoundation.org/show_bug.cgi?id=139324 --- Comment #1 from W Cole --- Created attachment 168583 --> https://bugs.documentfoundation.org/attachment.cgi?id=168583=edit Technical Document No. 5 w/Problematic ToC The ToC in this document exhibits the problems described in the bug report. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139324] New: Table of Contents Not Working Properly
https://bugs.documentfoundation.org/show_bug.cgi?id=139324 Bug ID: 139324 Summary: Table of Contents Not Working Properly Product: LibreOffice Version: 7.0.3.1 release Hardware: x86-64 (AMD64) OS: All Status: UNCONFIRMED Severity: normal Priority: medium Component: Writer Assignee: libreoffice-bugs@lists.freedesktop.org Reporter: wac1...@gmail.com Description: The ToC in a single document (a) does not indent any index items beyond level 2 and (b) allows editing of the styles but does not implement the edits. The problem seems to be confined to a single document which is attached. Steps to Reproduce: 1. Insert a Table of Contents 2. Create appropriate index entries 3. Update the Index 4. Edit and save the Style for Title for the Index Actual Results: ToC Title format not changed. Index entries greater than level 2 are not indented. Expected Results: ToC Title format is changed. Index entries are indented based on their assigned index levels. Reproducible: Always User Profile Reset: Yes Additional Info: I have only found this problem on one document which is attached. I have taken the following steps to attempt to address the problem: 1. I have reset the user profiles on each machine running LO. 2. Have opened this document on other machines running the same version of LO. The same result was achieved regardless of machine. 2. Have deleted the ToC and all the index entries and then recreated them on the same document. No change in result. 3. Using other Writer documents have successfully entered, updated and edited the index entries and ToC. With regard to OpenGL, I do not show and entry under Tools|LibreOffice|View that is titled "Use OpenGL for all rendering". There is a line for "Use hardware acceleration" but it is grayed-out. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 136278] The left arrow key causes objects to disappear.
https://bugs.documentfoundation.org/show_bug.cgi?id=136278 --- Comment #43 from Buovjaga --- (In reply to Gülşah Köse from comment #42) > I can confirm the bug as described below. This is not a regression caused by > me. It should be another regression. While bisecting please make sure that > the bad situation is like as below. > > > > > Still reproducible with my attachment "simpler repro file", but now with > > different behavior: > > - Start presentation with F5, 5x right arrow, 5x left arrow, 5x right arrow. > > - Expected: Presentation should be in final state (five visible blue boxes). > > - Instead: After 4x right arrow I see 3(!) blue boxes (#1, #2, and #4; #3 is > > missing), and after one additional right-arrow keypress (5 in total) the > > presentation surprisingly is in the white-on-black "Click to exit > > presentation..." end state. Contrary to comment 39, there was no bug before. I double-checked it with linux-64-7.0 repo. Now the regression has changed with https://git.libreoffice.org/core/commit/a63caf49958b40e33e0d7aaedbe6424f78ecdc46 to the one described by Horst in comment 40. I bibisected it with linux-64-7.2. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 118339] Memory used for RTF paste is only released after document close
https://bugs.documentfoundation.org/show_bug.cgi?id=118339 Dieter changed: What|Removed |Added Status|NEW |NEEDINFO --- Comment #2 from Dieter --- Tested again with Version: 7.2.0.0.alpha0+ (x64) Build ID: c0eee433e079d8e3413f4691607e075b99af92b0 CPU threads: 4; OS: Windows 10.0 Build 19042; UI render: Skia/Raster; VCL: win Locale: de-DE (de_DE); UI: en-GB Calc: threaded Result: Maxmium memory usage of 330 MB and LO becomes unresponsive for a while So is this the expected result? Waht do you think, Telesto? => NEEDINFO -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139272] Clear formatting in table causes switch from Table Content style to Default formatting
https://bugs.documentfoundation.org/show_bug.cgi?id=139272 V Stuart Foote changed: What|Removed |Added Summary|Clear formatting in table |Clear formatting in table |causes switch from Table of |causes switch from Table |contents formatting to |Content style to Default |Default formatting |formatting --- Comment #8 from V Stuart Foote --- Hey, I can not confirm STR of OP. An inserted table with 'Standard' template receives 'Table Contents' paragraph style assignments. Selecting the entire table, and clearing Direct Formatting does not clear the 'Table Contents' styles from the Table cells. Otherwise in response to comment 7, if the Table's cells are styled--Clear Direct Formatting should do nothing. If they had been directly formatted--then I would expect they would revert to the 'Table Contents' of the 'standard' template. That seems to happen. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 119727] [META] Paragraph borders bugs and enhancements
https://bugs.documentfoundation.org/show_bug.cgi?id=119727 Bug 119727 depends on bug 114119, which changed state. Bug 114119 Summary: Writer: inconsistent application of borders in texts with different styles https://bugs.documentfoundation.org/show_bug.cgi?id=114119 What|Removed |Added Status|NEW |RESOLVED Resolution|--- |WORKSFORME -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139315] Report Builder displays date field as number when query is executed by "run sql directly"
https://bugs.documentfoundation.org/show_bug.cgi?id=139315 Robert Großkopf changed: What|Removed |Added Summary|report wizard displays date |Report Builder displays |field as number in some |date field as number when |cases |query is executed by "run ||sql directly" -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 108382] [META] Borders bugs and enhancements
https://bugs.documentfoundation.org/show_bug.cgi?id=108382 Bug 108382 depends on bug 114119, which changed state. Bug 114119 Summary: Writer: inconsistent application of borders in texts with different styles https://bugs.documentfoundation.org/show_bug.cgi?id=114119 What|Removed |Added Status|NEW |RESOLVED Resolution|--- |WORKSFORME -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 114119] Writer: inconsistent application of borders in texts with different styles
https://bugs.documentfoundation.org/show_bug.cgi?id=114119 Dieter changed: What|Removed |Added Resolution|--- |WORKSFORME Status|NEW |RESOLVED --- Comment #5 from Dieter --- WORKSFORME with Version: 7.0.4.2 (x64) Build ID: dcf040e67528d9187c66b2379df5ea4407429775 CPU threads: 4; OS: Windows 10.0 Build 19042; UI render: Skia/Raster; VCL: win Locale: de-DE (de_DE); UI: en-GB Calc: threaded One problem remains: There is a little space within the to and bottom border between the two words. But that should be treated as a different bug. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139315] report wizard displays date field as number in some cases
https://bugs.documentfoundation.org/show_bug.cgi?id=139315 Robert Großkopf changed: What|Removed |Added CC||rob...@familiegrosskopf.de --- Comment #8 from Robert Großkopf --- The default value has nothing to do with this behavior. The query could only be executed by direct SQL, because the GUI doesn't know what to do with '- 365'. Remember: DATEADD (and this is a part of it) isn't known in the old internal HSQLDB. So the Report Builder doesn't know how to handle with this query. You also have to set the report builder to Analyze SQL → No for executing a query, which doesn't work with the Query GUI. This query will work: SELECT * FROM "EMP" WHERE WHERE "startdate" > CAST( CURRENT_DATE AS DATE ) - 365 I don't know why, but the GUI will accept this and it will also work together with report builder and format the date directly as a date. One hint: Report Builder will better work with views. He could analyze the SQL, all grouping and sorting will work. The view looks for the report like a table with clear defined types for every field. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 120726] UI - Table protected cells: Add possibility to disable warning message
https://bugs.documentfoundation.org/show_bug.cgi?id=120726 --- Comment #5 from men...@deds.nl --- Please please either fix this bug (120726) or bug https://bugs.documentfoundation.org/show_bug.cgi?id=139304: there are too many rows which slows things down to a crawl (or gives waiting times up to a minute) often when using ctrl+shift+down or ctrl+shift+left and/or applying mark up. Protecting all cells except 20x200 at the top left, could maybe be a good solution to problem 139304. I think anyone of these bugs would achieve my goal to have a quick responding Calc all the time and without any useless warnings. I don't know why Calc slows down so much or gives very long waiting times; but it does NOT do so if I select / apply mark up to a limited number of cells. Than everything is very rapid. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139272] Clear formatting in table causes switch from Table of contents formatting to Default formatting
https://bugs.documentfoundation.org/show_bug.cgi?id=139272 Telesto changed: What|Removed |Added CC||vstuart.fo...@utsa.edu --- Comment #7 from Telesto --- (In reply to Dave Barton from comment #6) > It needs no UX evaluation, because it was evaluated and changed in bug 70759. Thanks for the pointer. It doesn't address the tables specifically :-( Bug 70759 comment 28: V Stuart Foote "Correct action should be to apply Default Style to restore paragraph to match default format when creating paragraphs as from standard template. " I could replace "creating paragraphs" with "creating tables". Which in my reading would result in 'revert to table content style'. However prefer asking the author himself. @Stuart What is clear formatting supposed to do inside a table in your opinion. Revert from Table Content (Paragraph) Style (the default at table insertion) or any other applied style "default paragraph style" or back to "Table of Content Style" -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
[Libreoffice-bugs] [Bug 139304] WAY too many rows. It gives performance problems.
https://bugs.documentfoundation.org/show_bug.cgi?id=139304 --- Comment #2 from men...@deds.nl --- (In reply to m.a.riosv from comment #1) > Created attachment 168575 [details] > Sample file > > Maybe I'm wrong, but it is easy to get it with sheet protection, disabling > 'Select protected cells' > > At least since > Version: 7.0.5.0.0+ (x64) > Build ID: e29387a749edb1bf39ca2b558099964da42b3a4b > CPU threads: 4; OS: Windows 10.0 Build 20180; UI render: Skia/Vulkan; VCL: > win > Locale: es-ES (es_ES); Interfaz: es-ES Calc: CL > Version: 7.1.0.1 (x64) > Build ID: b585d7d90ab863bf29b2d110c174c0c2a98f3ee4 > CPU threads: 4; OS: Windows 10.0 Build 20180; UI render: Skia/Vulkan; VCL: > win > Locale: es-ES (es_ES); UI: es-ES Calc: CL Thank you for your response. I didn't think of that option. But, unfortunately, it it gives a new problem: if you want to copy mark up to the end of a column with ctrl+alt+end, you get a warning that you can't edit cells EVERY single time. It would be helpful if they did something with this bug: https://bugs.documentfoundation.org/show_bug.cgi?id=120726. I will add an entry there. Either way, I think it would be best that there would be a native option to just completely get rid of most rows and columns. Giving the user maximum flexibility/options is key for getting to optimal software. I'm sure that MANY spreadsheet users would use the new option, if it would be implemented. -- You are receiving this mail because: You are the assignee for the bug.___ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs