Re: [libvirt] libvirt-libxl driver defaulting to tap disk and not working (ubuntu 12.10 + xen 4.5 + libvirt 1.2.3 + openstack)
On 21.04.2014 23:53, Jim Fehlig wrote: Tian, Shuangtai wrote: Hi, Jim The blktap seems not a module in xen 4.5, when I tried the load it , can not find the module, is there something wrong I did? It would be provided by your dom0 kernel, not Xen. The Ubuntu Xen kernel doesn't provide a blktap module? There is a blktap source package which can be installed separately. Though I must admit I never tried to use it. There is some code for blktap(2) in the Xen source but I had to disable that because it would otherwise clash with the external package. Tian, you may try to sudo apt-get install blktap-utils which should pull in the other pieces (libraryies/dkms module). -Stefan Regards, Jim BTW ,I compiled the xen4.5 by myself. Thanks ! -Original Message- From: Jim Fehlig [mailto:jfeh...@suse.com] Sent: Friday, April 18, 2014 11:52 PM To: Tian, Shuangtai Cc: libvir-list@redhat.com Subject: Re: [libvirt] libvirt-libxl driver defaulting to tap disk and not working (ubuntu 12.10 + xen 4.5 + libvirt 1.2.3 + openstack) Tian, Shuangtai wrote: HI I am an openstacker, when I used the latest libvirt and xen code to run the openstack. Can not create the vm. there is an error in libxl log, you can see the log: Os : Ubuntu 12.10 Compiled against library: libvirt 1.2.3 Using library: libvirt 1.2.3 Using API: Xen 1.2.3 Running hypervisor: Xen 4.5.0 libxl: debug: libxl_create.c:1356:do_domain_create: ao 0x7f7894002810: create: how=(nil) callback=(nil) poller=0x7f7894001bb0 libxl: debug: libxl_device.c:251:libxl__device_disk_set_backend: Disk vdev=xvda spec.backend=tap libxl: debug: libxl_device.c:210:disk_try_backend: Disk vdev=xvda, backend tap unsuitable because blktap not available In addition to John's suggestions, try loading a blktap module in dom0. It should work if a blktap driver is available. Regards, Jim libxl: error: libxl_device.c:289:libxl__device_disk_set_backend: no suitable backend for disk xvda libxl: debug: libxl_event.c:1739:libxl__ao_complete: ao 0x7f7894002810: complete, rc=-3 libxl: debug: libxl_create.c:1370:do_domain_create: ao 0x7f7894002810: inprogress: poller=0x7f7894001bb0, flags=ic libxl: debug: libxl_event.c:1711:libxl__ao__destroy: ao 0x7f7894002810: destroy The blktap does work, and I also find the same error someone has posted, (http://www.redhat.com/archives/libvir-list/2013-February/msg01124.htm l) When I change the type to “phy”, it also doesnot work. And try to change the type to other options, also does not work. Can someone give me some suggestions? Thanks ! The XML from the openstack is : domain type=xen uuid9e9ed86c-8892-40da-acd1-31ec6303abfe/uuid nameinstance-0001/name memory524288/memory vcpu1/vcpu os typexen/type kernel/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec630 3abfe/kernel/kernel initrd/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec630 3abfe/ramdisk/initrd cmdlinero root=/dev/xvda/cmdline /os features acpi/ apic/ /features clock offset=utc/ devices disk type=file device=disk driver name=tap2 type=raw cache=none/ source file=/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec6303a bfe/disk/ target bus=xen dev=xvda/ /disk disk type=file device=cdrom driver name=tap2 type=raw cache=none/ source file=/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec6303a bfe/disk.config/ target bus=ide dev=xvdd/ /disk interface type=bridge mac address=fa:16:3e:d8:c3:c0/ source bridge=br100/ filterref filter=nova-instance-instance-0001-fa163ed8c3c0/ /interface console type=pty/ graphics type=vnc autoport=yes keymap=en-us listen=127.0.0.1/ video model type=xen/ /video /devices /domain Best regards, Tian, Shuangtai -- -- -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list signature.asc Description: OpenPGP digital signature -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
Re: [libvirt] libvirt-libxl driver defaulting to tap disk and not working (ubuntu 12.10 + xen 4.5 + libvirt 1.2.3 + openstack)
Jim and Stefan Thanks , I will check my environment again. -Original Message- From: Stefan Bader [mailto:stefan.ba...@canonical.com] Sent: Tuesday, April 22, 2014 4:20 PM To: Jim Fehlig; Tian, Shuangtai Cc: libvir-list@redhat.com Subject: Re: [libvirt] libvirt-libxl driver defaulting to tap disk and not working (ubuntu 12.10 + xen 4.5 + libvirt 1.2.3 + openstack) On 21.04.2014 23:53, Jim Fehlig wrote: Tian, Shuangtai wrote: Hi, Jim The blktap seems not a module in xen 4.5, when I tried the load it , can not find the module, is there something wrong I did? It would be provided by your dom0 kernel, not Xen. The Ubuntu Xen kernel doesn't provide a blktap module? There is a blktap source package which can be installed separately. Though I must admit I never tried to use it. There is some code for blktap(2) in the Xen source but I had to disable that because it would otherwise clash with the external package. Tian, you may try to sudo apt-get install blktap-utils which should pull in the other pieces (libraryies/dkms module). -Stefan Regards, Jim BTW ,I compiled the xen4.5 by myself. Thanks ! -Original Message- From: Jim Fehlig [mailto:jfeh...@suse.com] Sent: Friday, April 18, 2014 11:52 PM To: Tian, Shuangtai Cc: libvir-list@redhat.com Subject: Re: [libvirt] libvirt-libxl driver defaulting to tap disk and not working (ubuntu 12.10 + xen 4.5 + libvirt 1.2.3 + openstack) Tian, Shuangtai wrote: HI I am an openstacker, when I used the latest libvirt and xen code to run the openstack. Can not create the vm. there is an error in libxl log, you can see the log: Os : Ubuntu 12.10 Compiled against library: libvirt 1.2.3 Using library: libvirt 1.2.3 Using API: Xen 1.2.3 Running hypervisor: Xen 4.5.0 libxl: debug: libxl_create.c:1356:do_domain_create: ao 0x7f7894002810: create: how=(nil) callback=(nil) poller=0x7f7894001bb0 libxl: debug: libxl_device.c:251:libxl__device_disk_set_backend: Disk vdev=xvda spec.backend=tap libxl: debug: libxl_device.c:210:disk_try_backend: Disk vdev=xvda, backend tap unsuitable because blktap not available In addition to John's suggestions, try loading a blktap module in dom0. It should work if a blktap driver is available. Regards, Jim libxl: error: libxl_device.c:289:libxl__device_disk_set_backend: no suitable backend for disk xvda libxl: debug: libxl_event.c:1739:libxl__ao_complete: ao 0x7f7894002810: complete, rc=-3 libxl: debug: libxl_create.c:1370:do_domain_create: ao 0x7f7894002810: inprogress: poller=0x7f7894001bb0, flags=ic libxl: debug: libxl_event.c:1711:libxl__ao__destroy: ao 0x7f7894002810: destroy The blktap does work, and I also find the same error someone has posted, (http://www.redhat.com/archives/libvir-list/2013-February/msg01124.h tm l) When I change the type to “phy”, it also doesnot work. And try to change the type to other options, also does not work. Can someone give me some suggestions? Thanks ! The XML from the openstack is : domain type=xen uuid9e9ed86c-8892-40da-acd1-31ec6303abfe/uuid nameinstance-0001/name memory524288/memory vcpu1/vcpu os typexen/type kernel/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec6 30 3abfe/kernel/kernel initrd/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec6 30 3abfe/ramdisk/initrd cmdlinero root=/dev/xvda/cmdline /os features acpi/ apic/ /features clock offset=utc/ devices disk type=file device=disk driver name=tap2 type=raw cache=none/ source file=/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec630 3a bfe/disk/ target bus=xen dev=xvda/ /disk disk type=file device=cdrom driver name=tap2 type=raw cache=none/ source file=/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec630 3a bfe/disk.config/ target bus=ide dev=xvdd/ /disk interface type=bridge mac address=fa:16:3e:d8:c3:c0/ source bridge=br100/ filterref filter=nova-instance-instance-0001-fa163ed8c3c0/ /interface console type=pty/ graphics type=vnc autoport=yes keymap=en-us listen=127.0.0.1/ video model type=xen/ /video /devices /domain Best regards, Tian, Shuangtai -- -- -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
Re: [libvirt] libvirt-libxl driver defaulting to tap disk and not working (ubuntu 12.10 + xen 4.5 + libvirt 1.2.3 + openstack)
Tian, Shuangtai wrote: Hi, Jim The blktap seems not a module in xen 4.5, when I tried the load it , can not find the module, is there something wrong I did? It would be provided by your dom0 kernel, not Xen. The Ubuntu Xen kernel doesn't provide a blktap module? Regards, Jim BTW ,I compiled the xen4.5 by myself. Thanks ! -Original Message- From: Jim Fehlig [mailto:jfeh...@suse.com] Sent: Friday, April 18, 2014 11:52 PM To: Tian, Shuangtai Cc: libvir-list@redhat.com Subject: Re: [libvirt] libvirt-libxl driver defaulting to tap disk and not working (ubuntu 12.10 + xen 4.5 + libvirt 1.2.3 + openstack) Tian, Shuangtai wrote: HI I am an openstacker, when I used the latest libvirt and xen code to run the openstack. Can not create the vm. there is an error in libxl log, you can see the log: Os : Ubuntu 12.10 Compiled against library: libvirt 1.2.3 Using library: libvirt 1.2.3 Using API: Xen 1.2.3 Running hypervisor: Xen 4.5.0 libxl: debug: libxl_create.c:1356:do_domain_create: ao 0x7f7894002810: create: how=(nil) callback=(nil) poller=0x7f7894001bb0 libxl: debug: libxl_device.c:251:libxl__device_disk_set_backend: Disk vdev=xvda spec.backend=tap libxl: debug: libxl_device.c:210:disk_try_backend: Disk vdev=xvda, backend tap unsuitable because blktap not available In addition to John's suggestions, try loading a blktap module in dom0. It should work if a blktap driver is available. Regards, Jim libxl: error: libxl_device.c:289:libxl__device_disk_set_backend: no suitable backend for disk xvda libxl: debug: libxl_event.c:1739:libxl__ao_complete: ao 0x7f7894002810: complete, rc=-3 libxl: debug: libxl_create.c:1370:do_domain_create: ao 0x7f7894002810: inprogress: poller=0x7f7894001bb0, flags=ic libxl: debug: libxl_event.c:1711:libxl__ao__destroy: ao 0x7f7894002810: destroy The blktap does work, and I also find the same error someone has posted, (http://www.redhat.com/archives/libvir-list/2013-February/msg01124.htm l) When I change the type to “phy”, it also doesnot work. And try to change the type to other options, also does not work. Can someone give me some suggestions? Thanks ! The XML from the openstack is : domain type=xen uuid9e9ed86c-8892-40da-acd1-31ec6303abfe/uuid nameinstance-0001/name memory524288/memory vcpu1/vcpu os typexen/type kernel/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec630 3abfe/kernel/kernel initrd/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec630 3abfe/ramdisk/initrd cmdlinero root=/dev/xvda/cmdline /os features acpi/ apic/ /features clock offset=utc/ devices disk type=file device=disk driver name=tap2 type=raw cache=none/ source file=/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec6303a bfe/disk/ target bus=xen dev=xvda/ /disk disk type=file device=cdrom driver name=tap2 type=raw cache=none/ source file=/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec6303a bfe/disk.config/ target bus=ide dev=xvdd/ /disk interface type=bridge mac address=fa:16:3e:d8:c3:c0/ source bridge=br100/ filterref filter=nova-instance-instance-0001-fa163ed8c3c0/ /interface console type=pty/ graphics type=vnc autoport=yes keymap=en-us listen=127.0.0.1/ video model type=xen/ /video /devices /domain Best regards, Tian, Shuangtai -- -- -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
Re: [libvirt] libvirt-libxl driver defaulting to tap disk and not working (ubuntu 12.10 + xen 4.5 + libvirt 1.2.3 + openstack)
Hi ,John , You are right , this problem is solved when use the default driver, But I found the blktap in xen4.5 was not a module, it seems a library, am I right? And the VM also cannot start, I am not familiar whit xen, did you ever meet the below error, Thanks for helping me so much! 328 libxl: debug: libxl_event.c:606:libxl__ev_xswatch_deregister: watch w=0x7f102c0b9518 wpath=/local/domain/0/device-model/12/state token=3/0: deregister slotnum=3 329 libxl: error: libxl_dm.c:1371:device_model_spawn_outcome: domain 12 device model: spawn failed (rc=-3) 330 libxl: error: libxl_create.c:1194:domcreate_devmodel_started: device model did not start: -3 331 libxl: error: libxl_dm.c:1475:kill_device_model: Device Model already exited 332 libxl: debug: libxl_event.c:618:libxl__ev_xswatch_deregister: watch w=0x7f102c0cb640: deregister unregistered 333 libxl: debug: libxl_event.c:618:libxl__ev_xswatch_deregister: watch w=0x7f102c0cb850: deregister unregistered 334 libxl: debug: libxl_event.c:618:libxl__ev_xswatch_deregister: watch w=0x7f102c0cb220: deregister unregistered 335 libxl: debug: libxl_event.c:1739:libxl__ao_complete: ao 0x7f102c0c8820: complete, rc=-3 336 libxl: debug: libxl_event.c:1711:libxl__ao__destroy: ao 0x7f102c0c8820: destroy -Original Message- From: John Haxby [mailto:john.ha...@oracle.com] Sent: Thursday, April 17, 2014 10:31 PM To: Tian, Shuangtai; libvir-list@redhat.com Subject: Re: [libvirt] libvirt-libxl driver defaulting to tap disk and not working (ubuntu 12.10 + xen 4.5 + libvirt 1.2.3 + openstack) On 17/04/14 10:51, Tian, Shuangtai wrote: driver name=tap2 type=raw cache=none/ As I recall, tap2 is deprecated and libxl will fail with it. Perhaps try tap or just leaving the driver as default? jch -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
Re: [libvirt] libvirt-libxl driver defaulting to tap disk and not working (ubuntu 12.10 + xen 4.5 + libvirt 1.2.3 + openstack)
Hi, Jim The blktap seems not a module in xen 4.5, when I tried the load it , can not find the module, is there something wrong I did? BTW ,I compiled the xen4.5 by myself. Thanks ! -Original Message- From: Jim Fehlig [mailto:jfeh...@suse.com] Sent: Friday, April 18, 2014 11:52 PM To: Tian, Shuangtai Cc: libvir-list@redhat.com Subject: Re: [libvirt] libvirt-libxl driver defaulting to tap disk and not working (ubuntu 12.10 + xen 4.5 + libvirt 1.2.3 + openstack) Tian, Shuangtai wrote: HI I am an openstacker, when I used the latest libvirt and xen code to run the openstack. Can not create the vm. there is an error in libxl log, you can see the log: Os : Ubuntu 12.10 Compiled against library: libvirt 1.2.3 Using library: libvirt 1.2.3 Using API: Xen 1.2.3 Running hypervisor: Xen 4.5.0 libxl: debug: libxl_create.c:1356:do_domain_create: ao 0x7f7894002810: create: how=(nil) callback=(nil) poller=0x7f7894001bb0 libxl: debug: libxl_device.c:251:libxl__device_disk_set_backend: Disk vdev=xvda spec.backend=tap libxl: debug: libxl_device.c:210:disk_try_backend: Disk vdev=xvda, backend tap unsuitable because blktap not available In addition to John's suggestions, try loading a blktap module in dom0. It should work if a blktap driver is available. Regards, Jim libxl: error: libxl_device.c:289:libxl__device_disk_set_backend: no suitable backend for disk xvda libxl: debug: libxl_event.c:1739:libxl__ao_complete: ao 0x7f7894002810: complete, rc=-3 libxl: debug: libxl_create.c:1370:do_domain_create: ao 0x7f7894002810: inprogress: poller=0x7f7894001bb0, flags=ic libxl: debug: libxl_event.c:1711:libxl__ao__destroy: ao 0x7f7894002810: destroy The blktap does work, and I also find the same error someone has posted, (http://www.redhat.com/archives/libvir-list/2013-February/msg01124.htm l) When I change the type to “phy”, it also doesnot work. And try to change the type to other options, also does not work. Can someone give me some suggestions? Thanks ! The XML from the openstack is : domain type=xen uuid9e9ed86c-8892-40da-acd1-31ec6303abfe/uuid nameinstance-0001/name memory524288/memory vcpu1/vcpu os typexen/type kernel/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec630 3abfe/kernel/kernel initrd/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec630 3abfe/ramdisk/initrd cmdlinero root=/dev/xvda/cmdline /os features acpi/ apic/ /features clock offset=utc/ devices disk type=file device=disk driver name=tap2 type=raw cache=none/ source file=/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec6303a bfe/disk/ target bus=xen dev=xvda/ /disk disk type=file device=cdrom driver name=tap2 type=raw cache=none/ source file=/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec6303a bfe/disk.config/ target bus=ide dev=xvdd/ /disk interface type=bridge mac address=fa:16:3e:d8:c3:c0/ source bridge=br100/ filterref filter=nova-instance-instance-0001-fa163ed8c3c0/ /interface console type=pty/ graphics type=vnc autoport=yes keymap=en-us listen=127.0.0.1/ video model type=xen/ /video /devices /domain Best regards, Tian, Shuangtai -- -- -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
Re: [libvirt] libvirt-libxl driver defaulting to tap disk and not working (ubuntu 12.10 + xen 4.5 + libvirt 1.2.3 + openstack)
Tian, Shuangtai wrote: HI I am an openstacker, when I used the latest libvirt and xen code to run the openstack. Can not create the vm. there is an error in libxl log, you can see the log: Os : Ubuntu 12.10 Compiled against library: libvirt 1.2.3 Using library: libvirt 1.2.3 Using API: Xen 1.2.3 Running hypervisor: Xen 4.5.0 libxl: debug: libxl_create.c:1356:do_domain_create: ao 0x7f7894002810: create: how=(nil) callback=(nil) poller=0x7f7894001bb0 libxl: debug: libxl_device.c:251:libxl__device_disk_set_backend: Disk vdev=xvda spec.backend=tap libxl: debug: libxl_device.c:210:disk_try_backend: Disk vdev=xvda, backend tap unsuitable because blktap not available In addition to John's suggestions, try loading a blktap module in dom0. It should work if a blktap driver is available. Regards, Jim libxl: error: libxl_device.c:289:libxl__device_disk_set_backend: no suitable backend for disk xvda libxl: debug: libxl_event.c:1739:libxl__ao_complete: ao 0x7f7894002810: complete, rc=-3 libxl: debug: libxl_create.c:1370:do_domain_create: ao 0x7f7894002810: inprogress: poller=0x7f7894001bb0, flags=ic libxl: debug: libxl_event.c:1711:libxl__ao__destroy: ao 0x7f7894002810: destroy The blktap does work, and I also find the same error someone has posted, (http://www.redhat.com/archives/libvir-list/2013-February/msg01124.html) When I change the type to “phy”, it also doesnot work. And try to change the type to other options, also does not work. Can someone give me some suggestions? Thanks ! The XML from the openstack is : domain type=xen uuid9e9ed86c-8892-40da-acd1-31ec6303abfe/uuid nameinstance-0001/name memory524288/memory vcpu1/vcpu os typexen/type kernel/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec6303abfe/kernel/kernel initrd/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec6303abfe/ramdisk/initrd cmdlinero root=/dev/xvda/cmdline /os features acpi/ apic/ /features clock offset=utc/ devices disk type=file device=disk driver name=tap2 type=raw cache=none/ source file=/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec6303abfe/disk/ target bus=xen dev=xvda/ /disk disk type=file device=cdrom driver name=tap2 type=raw cache=none/ source file=/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec6303abfe/disk.config/ target bus=ide dev=xvdd/ /disk interface type=bridge mac address=fa:16:3e:d8:c3:c0/ source bridge=br100/ filterref filter=nova-instance-instance-0001-fa163ed8c3c0/ /interface console type=pty/ graphics type=vnc autoport=yes keymap=en-us listen=127.0.0.1/ video model type=xen/ /video /devices /domain Best regards, Tian, Shuangtai -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
[libvirt] libvirt-libxl driver defaulting to tap disk and not working (ubuntu 12.10 + xen 4.5 + libvirt 1.2.3 + openstack)
HI I am an openstacker, when I used the latest libvirt and xen code to run the openstack. Can not create the vm. there is an error in libxl log, you can see the log: Os : Ubuntu 12.10 Compiled against library: libvirt 1.2.3 Using library: libvirt 1.2.3 Using API: Xen 1.2.3 Running hypervisor: Xen 4.5.0 libxl: debug: libxl_create.c:1356:do_domain_create: ao 0x7f7894002810: create: how=(nil) callback=(nil) poller=0x7f7894001bb0 libxl: debug: libxl_device.c:251:libxl__device_disk_set_backend: Disk vdev=xvda spec.backend=tap libxl: debug: libxl_device.c:210:disk_try_backend: Disk vdev=xvda, backend tap unsuitable because blktap not available libxl: error: libxl_device.c:289:libxl__device_disk_set_backend: no suitable backend for disk xvda libxl: debug: libxl_event.c:1739:libxl__ao_complete: ao 0x7f7894002810: complete, rc=-3 libxl: debug: libxl_create.c:1370:do_domain_create: ao 0x7f7894002810: inprogress: poller=0x7f7894001bb0, flags=ic libxl: debug: libxl_event.c:1711:libxl__ao__destroy: ao 0x7f7894002810: destroy The blktap does work, and I also find the same error someone has posted, (http://www.redhat.com/archives/libvir-list/2013-February/msg01124.html) When I change the type to phy, it also doesnot work. And try to change the type to other options, also does not work. Can someone give me some suggestions? Thanks ! The XML from the openstack is : domain type=xen uuid9e9ed86c-8892-40da-acd1-31ec6303abfe/uuid nameinstance-0001/name memory524288/memory vcpu1/vcpu os typexen/type kernel/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec6303abfe/kernel/kernel initrd/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec6303abfe/ramdisk/initrd cmdlinero root=/dev/xvda/cmdline /os features acpi/ apic/ /features clock offset=utc/ devices disk type=file device=disk driver name=tap2 type=raw cache=none/ source file=/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec6303abfe/disk/ target bus=xen dev=xvda/ /disk disk type=file device=cdrom driver name=tap2 type=raw cache=none/ source file=/opt/stack/data/nova/instances/9e9ed86c-8892-40da-acd1-31ec6303abfe/disk.config/ target bus=ide dev=xvdd/ /disk interface type=bridge mac address=fa:16:3e:d8:c3:c0/ source bridge=br100/ filterref filter=nova-instance-instance-0001-fa163ed8c3c0/ /interface console type=pty/ graphics type=vnc autoport=yes keymap=en-us listen=127.0.0.1/ video model type=xen/ /video /devices /domain Best regards, Tian, Shuangtai -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
Re: [libvirt] libvirt-libxl driver defaulting to tap disk and not working (ubuntu 12.10 + xen 4.5 + libvirt 1.2.3 + openstack)
On 17/04/14 10:51, Tian, Shuangtai wrote: driver name=tap2 type=raw cache=none/ As I recall, tap2 is deprecated and libxl will fail with it. Perhaps try tap or just leaving the driver as default? jch -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list