Re: eth1

2016-07-07 Por tema Roy Alvear 
Estimado, para el eth1 debe decir su archivo:

DEVICE=eth1

Y el 

HWADDR=00:15:60:0E:FF:A3

Según lo que se lee un los resultados de sus correos anteriores.

Saludos.

El 7 de julio de 2016 18:35:23 GMT-04:00, Luis Enrique Araneda 
 escribió:
>jajajjaj! utilizaré ese pulento scritp antes de aplicarlo le
>saque
>las chacharas a la interface ifcfg-eth1 y la dejé asi tal cual
>
>DEVICE=eth0
>BOOTPROTO=none
>HWADDR=AA:BB:BB:DD:EE:FF
>NM_CONTROLLED=no
>ONBOOT=yes
>IPADDR=192.168.56.7
>NETMASK=255.255.255.0
>
>
>Gracias estimadisimos
>
>
>
>2016-07-07 18:12 GMT-04:00 barbudone :
>
>> El 'atao' es NetworkManager:
>>
>> #!/bin/bash
>>
>> ATAO=NetworkManager
>> service $ATAO stop ; chkconfig --level 35 $ATAO off
>> service netwok restart
>> echo happy ; logout
>>
>> -eof-
>>
>>
>> 2016-07-07 17:59 GMT-04:00 Luis Enrique Araneda :
>>
>> > Amigos, con esta les hago un queque!
>> >
>> > Le configuré la ip correspondiente a este tarro y me arroja este
>error:
>> >
>> > [root@mail network-scripts]# service network restart
>> > Shutting down interface Auto_eth0:  Device state: 3 (disconnected)
>> >[  OK  ]
>> > Shutting down interface eth1:  Error: Device 'eth1'
>> > (/org/freedesktop/NetworkManager/Devices/1) disconnecting failed:
>This
>> > device is not active
>> >[FAILED]
>> > Shutting down loopback interface:  [  OK  ]
>> > Bringing up loopback interface:[  OK  ]
>> > Bringing up interface Auto_eth0:  Active connection state:
>activated
>> > Active connection path:
>> /org/freedesktop/NetworkManager/ActiveConnection/1
>> >[  OK  ]
>> >
>> > la config esta bien...!!! cual será el atao?
>> >
>> >
>> > Auto_eth0 Link encap:Ethernet  HWaddr 00:15:60:0E:FF:A4
>> >   inet addr:10.198.3.7  Bcast:10.198.3.127 
>Mask:255.255.255.128
>> >   inet6 addr: fe80::215:60ff:fe0e:ffa4/64 Scope:Link
>> >   UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>> >   RX packets:4565 errors:0 dropped:0 overruns:0 frame:0
>> >   TX packets:6853 errors:0 dropped:0 overruns:0 carrier:0
>> >   collisions:0 txqueuelen:1000
>> >   RX bytes:382184 (373.2 KiB)  TX bytes:6539263 (6.2 MiB)
>> >   Interrupt:25
>> >
>> > eth1  Link encap:Ethernet  HWaddr 00:15:60:0E:FF:A3
>> >   inet6 addr: fe80::215:60ff:fe0e:ffa3/64 Scope:Link
>> >   UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>> >   RX packets:605 errors:0 dropped:0 overruns:0 frame:0
>> >   TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
>> >   collisions:0 txqueuelen:1000
>> >   RX bytes:48642 (47.5 KiB)  TX bytes:492 (492.0 b)
>> >   Interrupt:26
>> >
>> >
>> > --
>> > Luis Enrique Araneda
>> >
>>
>>
>>
>> --
>> barbud...@gmail.com
>>
>
>
>
>-- 
>Luis Enrique Araneda
>Ingeniero en sistemas

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.

Re: eth1

2016-07-07 Por tema Christian Pedreros 
Pregunta, estas levantando la red con nerworkmanager o Ifup?
El 7 jul. 2016 18:33, "Juan Carlos Inostroza"  escribió:

> La solucion no seria deshabilitar un servicio, sino saber por que esta
> haciendo eso.
>
> Verificate las reglas de udev. En una de esas, quedo apuntando con
> otra eth (/etc/udev.d). Requiere reiniciar udev o reiniciar el tarro.
>
> Saludos,
>
> On Thu, Jul 7, 2016 at 6:12 PM, barbudone  wrote:
> > El 'atao' es NetworkManager:
> >
> > #!/bin/bash
> >
> > ATAO=NetworkManager
> > service $ATAO stop ; chkconfig --level 35 $ATAO off
> > service netwok restart
> > echo happy ; logout
> >
> > -eof-
> >
> >
> > 2016-07-07 17:59 GMT-04:00 Luis Enrique Araneda :
> >
> >> Amigos, con esta les hago un queque!
> >>
> >> Le configuré la ip correspondiente a este tarro y me arroja este error:
> >>
> >> [root@mail network-scripts]# service network restart
> >> Shutting down interface Auto_eth0:  Device state: 3 (disconnected)
> >>[  OK  ]
> >> Shutting down interface eth1:  Error: Device 'eth1'
> >> (/org/freedesktop/NetworkManager/Devices/1) disconnecting failed: This
> >> device is not active
> >>[FAILED]
> >> Shutting down loopback interface:  [  OK  ]
> >> Bringing up loopback interface:[  OK  ]
> >> Bringing up interface Auto_eth0:  Active connection state: activated
> >> Active connection path:
> /org/freedesktop/NetworkManager/ActiveConnection/1
> >>[  OK  ]
> >>
> >> la config esta bien...!!! cual será el atao?
> >>
> >>
> >> Auto_eth0 Link encap:Ethernet  HWaddr 00:15:60:0E:FF:A4
> >>   inet addr:10.198.3.7  Bcast:10.198.3.127  Mask:255.255.255.128
> >>   inet6 addr: fe80::215:60ff:fe0e:ffa4/64 Scope:Link
> >>   UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >>   RX packets:4565 errors:0 dropped:0 overruns:0 frame:0
> >>   TX packets:6853 errors:0 dropped:0 overruns:0 carrier:0
> >>   collisions:0 txqueuelen:1000
> >>   RX bytes:382184 (373.2 KiB)  TX bytes:6539263 (6.2 MiB)
> >>   Interrupt:25
> >>
> >> eth1  Link encap:Ethernet  HWaddr 00:15:60:0E:FF:A3
> >>   inet6 addr: fe80::215:60ff:fe0e:ffa3/64 Scope:Link
> >>   UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >>   RX packets:605 errors:0 dropped:0 overruns:0 frame:0
> >>   TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
> >>   collisions:0 txqueuelen:1000
> >>   RX bytes:48642 (47.5 KiB)  TX bytes:492 (492.0 b)
> >>   Interrupt:26
> >>
> >>
> >> --
> >> Luis Enrique Araneda
> >>
> >
> >
> >
> > --
> > barbud...@gmail.com
>
>
>
> --
> Juan C. Inostroza
> 
> "You're a ghost driving a meat coated skeleton made from stardust.
> What do you have to be afraid of?"
>

Re: eth1

2016-07-07 Por tema Luis Enrique Araneda 
jajajjaj! utilizaré ese pulento scritp antes de aplicarlo le saque
las chacharas a la interface ifcfg-eth1 y la dejé asi tal cual

DEVICE=eth0
BOOTPROTO=none
HWADDR=AA:BB:BB:DD:EE:FF
NM_CONTROLLED=no
ONBOOT=yes
IPADDR=192.168.56.7
NETMASK=255.255.255.0


Gracias estimadisimos



2016-07-07 18:12 GMT-04:00 barbudone :

> El 'atao' es NetworkManager:
>
> #!/bin/bash
>
> ATAO=NetworkManager
> service $ATAO stop ; chkconfig --level 35 $ATAO off
> service netwok restart
> echo happy ; logout
>
> -eof-
>
>
> 2016-07-07 17:59 GMT-04:00 Luis Enrique Araneda :
>
> > Amigos, con esta les hago un queque!
> >
> > Le configuré la ip correspondiente a este tarro y me arroja este error:
> >
> > [root@mail network-scripts]# service network restart
> > Shutting down interface Auto_eth0:  Device state: 3 (disconnected)
> >[  OK  ]
> > Shutting down interface eth1:  Error: Device 'eth1'
> > (/org/freedesktop/NetworkManager/Devices/1) disconnecting failed: This
> > device is not active
> >[FAILED]
> > Shutting down loopback interface:  [  OK  ]
> > Bringing up loopback interface:[  OK  ]
> > Bringing up interface Auto_eth0:  Active connection state: activated
> > Active connection path:
> /org/freedesktop/NetworkManager/ActiveConnection/1
> >[  OK  ]
> >
> > la config esta bien...!!! cual será el atao?
> >
> >
> > Auto_eth0 Link encap:Ethernet  HWaddr 00:15:60:0E:FF:A4
> >   inet addr:10.198.3.7  Bcast:10.198.3.127  Mask:255.255.255.128
> >   inet6 addr: fe80::215:60ff:fe0e:ffa4/64 Scope:Link
> >   UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >   RX packets:4565 errors:0 dropped:0 overruns:0 frame:0
> >   TX packets:6853 errors:0 dropped:0 overruns:0 carrier:0
> >   collisions:0 txqueuelen:1000
> >   RX bytes:382184 (373.2 KiB)  TX bytes:6539263 (6.2 MiB)
> >   Interrupt:25
> >
> > eth1  Link encap:Ethernet  HWaddr 00:15:60:0E:FF:A3
> >   inet6 addr: fe80::215:60ff:fe0e:ffa3/64 Scope:Link
> >   UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >   RX packets:605 errors:0 dropped:0 overruns:0 frame:0
> >   TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
> >   collisions:0 txqueuelen:1000
> >   RX bytes:48642 (47.5 KiB)  TX bytes:492 (492.0 b)
> >   Interrupt:26
> >
> >
> > --
> > Luis Enrique Araneda
> >
>
>
>
> --
> barbud...@gmail.com
>



-- 
Luis Enrique Araneda
Ingeniero en sistemas

Re: eth1

2016-07-07 Por tema Juan Carlos Inostroza 
La solucion no seria deshabilitar un servicio, sino saber por que esta
haciendo eso.

Verificate las reglas de udev. En una de esas, quedo apuntando con
otra eth (/etc/udev.d). Requiere reiniciar udev o reiniciar el tarro.

Saludos,

On Thu, Jul 7, 2016 at 6:12 PM, barbudone  wrote:
> El 'atao' es NetworkManager:
>
> #!/bin/bash
>
> ATAO=NetworkManager
> service $ATAO stop ; chkconfig --level 35 $ATAO off
> service netwok restart
> echo happy ; logout
>
> -eof-
>
>
> 2016-07-07 17:59 GMT-04:00 Luis Enrique Araneda :
>
>> Amigos, con esta les hago un queque!
>>
>> Le configuré la ip correspondiente a este tarro y me arroja este error:
>>
>> [root@mail network-scripts]# service network restart
>> Shutting down interface Auto_eth0:  Device state: 3 (disconnected)
>>[  OK  ]
>> Shutting down interface eth1:  Error: Device 'eth1'
>> (/org/freedesktop/NetworkManager/Devices/1) disconnecting failed: This
>> device is not active
>>[FAILED]
>> Shutting down loopback interface:  [  OK  ]
>> Bringing up loopback interface:[  OK  ]
>> Bringing up interface Auto_eth0:  Active connection state: activated
>> Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/1
>>[  OK  ]
>>
>> la config esta bien...!!! cual será el atao?
>>
>>
>> Auto_eth0 Link encap:Ethernet  HWaddr 00:15:60:0E:FF:A4
>>   inet addr:10.198.3.7  Bcast:10.198.3.127  Mask:255.255.255.128
>>   inet6 addr: fe80::215:60ff:fe0e:ffa4/64 Scope:Link
>>   UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>>   RX packets:4565 errors:0 dropped:0 overruns:0 frame:0
>>   TX packets:6853 errors:0 dropped:0 overruns:0 carrier:0
>>   collisions:0 txqueuelen:1000
>>   RX bytes:382184 (373.2 KiB)  TX bytes:6539263 (6.2 MiB)
>>   Interrupt:25
>>
>> eth1  Link encap:Ethernet  HWaddr 00:15:60:0E:FF:A3
>>   inet6 addr: fe80::215:60ff:fe0e:ffa3/64 Scope:Link
>>   UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>>   RX packets:605 errors:0 dropped:0 overruns:0 frame:0
>>   TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
>>   collisions:0 txqueuelen:1000
>>   RX bytes:48642 (47.5 KiB)  TX bytes:492 (492.0 b)
>>   Interrupt:26
>>
>>
>> --
>> Luis Enrique Araneda
>>
>
>
>
> --
> barbud...@gmail.com



-- 
Juan C. Inostroza

"You're a ghost driving a meat coated skeleton made from stardust.
What do you have to be afraid of?"

Re: eth1

2016-07-07 Por tema barbudone 
El 'atao' es NetworkManager:

#!/bin/bash

ATAO=NetworkManager
service $ATAO stop ; chkconfig --level 35 $ATAO off
service netwok restart
echo happy ; logout

-eof-


2016-07-07 17:59 GMT-04:00 Luis Enrique Araneda :

> Amigos, con esta les hago un queque!
>
> Le configuré la ip correspondiente a este tarro y me arroja este error:
>
> [root@mail network-scripts]# service network restart
> Shutting down interface Auto_eth0:  Device state: 3 (disconnected)
>[  OK  ]
> Shutting down interface eth1:  Error: Device 'eth1'
> (/org/freedesktop/NetworkManager/Devices/1) disconnecting failed: This
> device is not active
>[FAILED]
> Shutting down loopback interface:  [  OK  ]
> Bringing up loopback interface:[  OK  ]
> Bringing up interface Auto_eth0:  Active connection state: activated
> Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/1
>[  OK  ]
>
> la config esta bien...!!! cual será el atao?
>
>
> Auto_eth0 Link encap:Ethernet  HWaddr 00:15:60:0E:FF:A4
>   inet addr:10.198.3.7  Bcast:10.198.3.127  Mask:255.255.255.128
>   inet6 addr: fe80::215:60ff:fe0e:ffa4/64 Scope:Link
>   UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>   RX packets:4565 errors:0 dropped:0 overruns:0 frame:0
>   TX packets:6853 errors:0 dropped:0 overruns:0 carrier:0
>   collisions:0 txqueuelen:1000
>   RX bytes:382184 (373.2 KiB)  TX bytes:6539263 (6.2 MiB)
>   Interrupt:25
>
> eth1  Link encap:Ethernet  HWaddr 00:15:60:0E:FF:A3
>   inet6 addr: fe80::215:60ff:fe0e:ffa3/64 Scope:Link
>   UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>   RX packets:605 errors:0 dropped:0 overruns:0 frame:0
>   TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
>   collisions:0 txqueuelen:1000
>   RX bytes:48642 (47.5 KiB)  TX bytes:492 (492.0 b)
>   Interrupt:26
>
>
> --
> Luis Enrique Araneda
>



-- 
barbud...@gmail.com

eth1

2016-07-07 Por tema Luis Enrique Araneda 
Amigos, con esta les hago un queque!

Le configuré la ip correspondiente a este tarro y me arroja este error:

[root@mail network-scripts]# service network restart
Shutting down interface Auto_eth0:  Device state: 3 (disconnected)
   [  OK  ]
Shutting down interface eth1:  Error: Device 'eth1'
(/org/freedesktop/NetworkManager/Devices/1) disconnecting failed: This
device is not active
   [FAILED]
Shutting down loopback interface:  [  OK  ]
Bringing up loopback interface:[  OK  ]
Bringing up interface Auto_eth0:  Active connection state: activated
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/1
   [  OK  ]

la config esta bien...!!! cual será el atao?


Auto_eth0 Link encap:Ethernet  HWaddr 00:15:60:0E:FF:A4
  inet addr:10.198.3.7  Bcast:10.198.3.127  Mask:255.255.255.128
  inet6 addr: fe80::215:60ff:fe0e:ffa4/64 Scope:Link
  UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
  RX packets:4565 errors:0 dropped:0 overruns:0 frame:0
  TX packets:6853 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:1000
  RX bytes:382184 (373.2 KiB)  TX bytes:6539263 (6.2 MiB)
  Interrupt:25

eth1  Link encap:Ethernet  HWaddr 00:15:60:0E:FF:A3
  inet6 addr: fe80::215:60ff:fe0e:ffa3/64 Scope:Link
  UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
  RX packets:605 errors:0 dropped:0 overruns:0 frame:0
  TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:1000
  RX bytes:48642 (47.5 KiB)  TX bytes:492 (492.0 b)
  Interrupt:26


-- 
Luis Enrique Araneda