[linux-dvb] Fwd: Frequencies at-Graz/at-STMK
Christoph -- Weitergeleitete Nachricht -- Betreff: Frequencies at-Graz/at-STMK Datum: Mittwoch 30 Januar 2008 Von: Caner Tekin [EMAIL PROTECTED] An: [EMAIL PROTECTED] # All official DVB-T Transponders run by the ORS (for Austria) # updated: 06/2007 (valid until autumn 2007) # T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy T 49000 8MHz 3/4 NONE QAM16 8k 1/4 NONE #K23, Innsbruck #T 49800 8MHz 3/4 NONE QAM16 8k 1/4 NONE #K24, Bregenz T 51400 8MHz 3/4 NONE QAM16 8k 1/4 NONE #T 56200 8MHz 3/4 NONE QAM16 8k 1/4 NONE #K24, Salzburg (w/ overspill to Germany) #T 57800 8MHz 3/4 NONE QAM16 8k 1/4 NONE #K31, Wien #T 56200 8MHz 3/4 NONE QAM16 8k 1/4 NONE #K43, Linz, Amstetten (NÖ) #T 75400 8MHz 3/4 NONE QAM16 8k 1/4 NONE #K56, Eisenstadt #T 79400 8MHz 3/4 NONE QAM16 8k 1/4 NONE #K61, Wien #T 80200 8MHz 3/4 NONE QAM16 8k 1/4 NONE #K62, Graz #T 85000 8MHz 3/4 NONE QAM16 8k 1/4 NONE #K68, St.Pölten #T 80200 8MHz 3/4 NONE QAM16 8k 1/4 NONE #K69, Graz, Klagenfurt, Viktring (Ktn.) --- ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Nova-T 500 issues - losing one tuner
On Friday 01 February 2008 21:43:51 Nicolas Will wrote: On Fri, 2008-02-01 at 21:07 +, Ben Firshman wrote: Feb 1 20:52:04 mythtv kernel: [ 11.072000] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware Feb 1 20:52:04 mythtv kernel: [ 11.132000] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw' ... Feb 1 20:52:04 mythtv kernel: [ 11.844000] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. Feb 1 20:52:04 mythtv kernel: [ 11.844000] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Feb 1 20:52:04 mythtv kernel: [ 11.844000] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) Feb 1 20:52:04 mythtv kernel: [ 11.956000] DVB: registering frontend 1 (DiBcom 3000MC/P)... ... Feb 1 20:52:04 mythtv kernel: [ 12.50] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Feb 1 20:52:04 mythtv kernel: [ 12.50] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) Feb 1 20:52:04 mythtv kernel: [ 12.508000] DVB: registering frontend 2 (DiBcom 3000MC/P)... Feb 1 20:52:04 mythtv kernel: [ 13.068000] input: IR-receiver inside an USB DVB receiver as /class/input/input2 Feb 1 20:52:04 mythtv kernel: [ 13.068000] dvb-usb: schedule remote query interval to 150 msecs. Feb 1 20:52:04 mythtv kernel: [ 13.068000] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. Got the tree from the day of your message, and I'm still having problems. I'm not the only one either: http://www.linuxtv.org/pipermail/linux-dvb/2008-January/022629.html Thanks Ben Nicolas Will wrote: On Sun, 2008-01-27 at 14:30 +, Ben Firshman wrote: I am using the (almost) latest SVN version of mythtv. I am using the v4l-dvb sources from a couple of days back. I have followed and used the patches that were on (are they in the repos now?): http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500 After a short while, one of the tuners dies. I get a (L__) Partial Lock message from mythtv. If it's any help, I also get messages like: DVB: frontend 0 frequency limits undefined - fix the driver In syslog, but that's even when it's working fine. Weird issue that I never encountered since I started using the card in August... Get a brand new tree, there have been a lot of changes very recently, merge of old patches and new fixes too. Make sure that you have the right firmware too. Then do a cold reboot, going through a power down, then check in the messages that the card was found in a cold state before a firmware upload. http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#Firmware Nico Ben, I'm at loss for an explanation. I'm just not experiencing your problem. People with a better brain than mine will need to jump in. Have you tried turning debugging on for the modules, and get a more verbose log from mythbackend ? Nico ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb Hi, I have been experiencing this problem for a few months now. I think it is related to the use of the remote control. I have written a workaround application for Ubuntu Linux that scans for a mt2060 error in the dmesg log. If found it will restart mythtv-backend. This seems to mitigate tha problem. I can't wait for this issue to be fixed. Shaun ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] script to automatically get signal strength and BER
On Fri, 2008-02-01 at 14:43 +, Nicolas Will wrote: Hi all, Before I try to make one, did anyone write a script that goes through a channels.conf file and outputs human readable signal strength, BER and such for all channels? I received 2 scripts by pers. email. Thanks guys ! I have created a wiki page containing the scripts http://linuxtv.org/wiki/index.php/Testing_reception_quality Hope this helps. Nico ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] diseqc amplifier
Hi, I got a old dvb-s FF card (hauppauge nexus 2.1), and I would like to drive a diseqc motor (with VDR motor plugin). Unfortunately the card can't provide enough power to drive the motor (the motor start to move the dish, but often the card became crazy (firmware hand/reboot, ...)). I remember some time ago to see a sort of diseqc amplifier/relay (may be in the spec) that could be put between the dvb-s card and the motor, and that will provide the extra power needed. Does some people have tried such thing ? What is your amplifier/ where did you buy it ? Thanks Matthieu ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Bugfix for make_atsc_chanconf.pl
Hi,
2008/1/30, Noah Magram [EMAIL PROTECTED]:
Hello all,
The antennaweb.org scraper make_atsc_chanconf.pl is broken due to
changes on the antennaweb.org site, specifically the need for cookies
and an additional mapping page that gets displayed when only a zipcode
is entered.
The latest in CVS gives this error as a result:
CVS is outdated and superseded by mercurial. Regenerated patch
attached - Mike, can I have your $0.02 please?
No such field 'stationXml' at ./make_atsc_chanconf.pl line 62
I have attached a patch that gets it working again.
Best,
-N
Christoph
diff -r baa56aaf9a5d util/szap/channels-conf/atsc/make_atsc_chanconf.pl
--- a/util/szap/channels-conf/atsc/make_atsc_chanconf.pl Mon Jan 28 13:50:42 2008 +0100
+++ b/util/szap/channels-conf/atsc/make_atsc_chanconf.pl Sat Feb 02 17:15:06 2008 +0100
@@ -6,6 +6,7 @@
use LWP;
use HTML::Form;
+ use HTTP::Cookies;
use XML::XPath;
use XML::XPath::XMLParser;
@@ -37,20 +38,24 @@
}
$ua = LWP::UserAgent-new;
+ $ua-cookie_jar({});
push @{$ua-requests_redirectable}, 'POST';
$response = $ua-get($WEBSITE);
if ($response-is_success) {
$form = HTML::Form-parse($response);
- $request = $form-click;
+ $request = $form-click(btnStart);
$response2 = $ua-request($request);
if ($response2-is_success) {
$form2 = HTML::Form-parse($response2);
$form2-param($ZIPCODE, $zipCode);
- $request2 = $form2-click;
+ $request2 = $form2-click(btnSubmit);
$response3 = $ua-request($request2);
- if ($response3-is_success) {
- $form3 = HTML::Form-parse($response3);
- $xml = $form3-value($XML);
+ $form3 = HTML::Form-parse($response3);
+ $request3 = $form3-click(btnContinue);
+ $response4 = $ua-request($request3);
+ if ($response4-is_success) {
+ $form4 = HTML::Form-parse($response4);
+ $xml = $form4-value($XML);
$xml =~ s/%22//g;
$xml =~ s/%2c/,/g;
$xml =~ s/%2f/\//g;
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Full list of Digitenne frequencies (DVB-T The Netherlands) (was: Fwd: [Kaffeine-user] nl-Groningen)
Hi, 2008/1/29, Mark van Cuijk [EMAIL PROTECTED]: Hi, I have not converted these to scan files, but I found this page, which might be useful to anyone who wants to use DVB-T in The Netherlands (Digitenne): http://home.planet.nl/~ploe2070/fmtv/dvbt/digitenne-kpntv.html Thanks, this page allows me to create a nl-All file, which I'll add instead :) Gr, Mark Christoph Pfister schreef: snip Christoph ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] Satelco EasyWatch + Cryptoworks
Hi, following the suggestion by Manu, I ditched the Twinhan VP1032 (which had problems with the Cryptoworks CAM) and bought a SAA7146-based Satelco EasyWatch PCI card with CI module. This gets recognized as device 1131/7146 subsystem 1894/001b and appears to work with the budget_av + dvb_pll + stv0299 module combination from a vanilla 2.6.24 kernel. Reception of FTA channels is OK, but the CI section looks even more problematic than the VP1032's. The kernel logs dvb_ca adapter 0: DVB CAM detected and initialised successfully However, any attempt to access the CAM fails: [EMAIL PROTECTED]:~$ dst_test -c main: Capabilities APP: Slots=[1] APP: Type=[2] APP: Descrambler keys=[0] APP: Type=[0] [EMAIL PROTECTED]:~$ dst_test -i main: Info No CI Slots found [EMAIL PROTECTED]:~$ dst_test -a main: App Info dst_comms: Msg=[9f 80 30 ] dst_comms: ioctl failed .. dst_get_app_info: Dst communication failed Maybe I'm missing something obvious? Thanks, David -- David Santinoli Tieffe Sistemi S.r.l. viale Piceno 21, Milano www.tieffesistemi.com tel. +39 02 76115215 ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Satelco EasyWatch + Cryptoworks
Hi, 2008/2/2, David Santinoli [EMAIL PROTECTED]: Hi, following the suggestion by Manu, I ditched the Twinhan VP1032 (which had problems with the Cryptoworks CAM) and bought a SAA7146-based Satelco EasyWatch PCI card with CI module. This gets recognized as device 1131/7146 subsystem 1894/001b and appears to work with the budget_av + dvb_pll + stv0299 module combination from a vanilla 2.6.24 kernel. Reception of FTA channels is OK, but the CI section looks even more problematic than the VP1032's. The kernel logs dvb_ca adapter 0: DVB CAM detected and initialised successfully However, any attempt to access the CAM fails: [EMAIL PROTECTED]:~$ dst_test -c snip Maybe I'm missing something obvious? Yes, those dst_* tools are only needed (and usable) for a few cards. Try gnutv or a normal dvb application (kaffeine, vdr, mythtv, ...). Thanks, David -- David Santinoli Tieffe Sistemi S.r.l. viale Piceno 21, Milano www.tieffesistemi.com tel. +39 02 76115215 Christoph ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
