Re: [linux-dvb] Twinhan DTV Ter 3028 frontend support (zl10353 chip)

2007-11-21 Thread Manu Abraham 
antonym antonymm wrote:
 Twinhan DTV Ter 3028 frontend support (zl10353 chip)
 
 can anything be done to assist in the development of zl10353 support
 for mantis based adapters?  Specifically my card which is a Twinhan
 DTV Ter 3028 ?
 
 (http://www.twinhan.com/product_terrestrial_3028.asp)
 

Currently, the Hopper chip is not supported as it is, I will add support 
for the same alongwith the mantis tree. But that alone is not sufficient 
for the 3028 to work, since it needs a better zl10353 driver.

Will address this as some of the other work is done

 Thanks,
 Antony

Regards,
Manu


___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[linux-dvb] Twinhan DTV Ter 3028 frontend support (zl10353 chip)

2007-11-20 Thread antonym antonymm 
Twinhan DTV Ter 3028 frontend support (zl10353 chip)

can anything be done to assist in the development of zl10353 support
for mantis based adapters?  Specifically my card which is a Twinhan
DTV Ter 3028 ?

(http://www.twinhan.com/product_terrestrial_3028.asp)

Thanks,
Antony

___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[linux-dvb] Twinhan DTV Ter 3028 frontend

2007-11-10 Thread antonym antonymm 
Any idea if the development of zl10353
support for mantis based adapters (Twinhan 3028) will occur?  Any help needed?

BTW:
Greg Kroah-Hartman ( [EMAIL PROTECTED]) is offering Free Linux Driver 
Development.

Thanks,
Antony

___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Twinhan DTV Ter 3028 frontend

2007-03-26 Thread Andreas Vinsander 

Manu Abraham wrote:

On 3/17/07, Simeon Walker [EMAIL PROTECTED] wrote:

Hi,

I have the Twinhan DTV Ter 3028 and have downloaded the mantis.tar.bz2. I
compiled and installed the drivers under 2.6.17 (Ubuntu Edgy). That much
went fine.

The problem is that no frontend is found in the /dev/dvb/adapter 
directory.

Is this card supported? Does anyone know which frontend should be in use?



It is not yet supported. The frontend on the card is the zl10353 chip
from Zarlink.


Manu, can we do anything to assist you in the development of zl10353 
support for mantis based adapters?


BR,
/Andreas

___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Twinhan DTV Ter 3028 frontend

2007-03-18 Thread Simeon Walker 

Ok, thanks for the reply.

Simeon

On 17/03/07, Manu Abraham [EMAIL PROTECTED] wrote:


On 3/17/07, Simeon Walker [EMAIL PROTECTED] wrote:
 Hi,

 I have the Twinhan DTV Ter 3028 and have downloaded the mantis.tar.bz2.
I
 compiled and installed the drivers under 2.6.17 (Ubuntu Edgy). That much
 went fine.

 The problem is that no frontend is found in the /dev/dvb/adapter
directory.
 Is this card supported? Does anyone know which frontend should be in
use?


It is not yet supported. The frontend on the card is the zl10353 chip
from Zarlink.


manu

___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[linux-dvb] Twinhan DTV Ter 3028 frontend

2007-03-17 Thread Simeon Walker 

Hi,

I have the Twinhan DTV Ter 3028 and have downloaded the mantis.tar.bz2. I
compiled and installed the drivers under 2.6.17 (Ubuntu Edgy). That much
went fine.

The problem is that no frontend is found in the /dev/dvb/adapter directory.
Is this card supported? Does anyone know which frontend should be in use?

lspci -vv gives:

02:02.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI
Bridge Controller [Ver 1.0] (rev 01)
   Subsystem: Twinhan Technology Co. Ltd Unknown device 0028
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium TAbort-
TAbort- MAbort- SERR- PERR-
   Latency: 32 (2000ns min, 63750ns max)
   Interrupt: pin A routed to IRQ 3
   Region 0: Memory at ec00 (32-bit, prefetchable) [size=4K]
   Capabilities: [40] Power Management version 2
   Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
   Status: D0 PME-Enable- DSel=0 DScale=0 PME-

This is the dmesg from when DVB is loaded to the last DVB related message:

[17179583.528000] Linux video capture interface: v2.00
[17179584.008000] saa7146: register extension 'budget dvb'.
[17179584.008000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 4
[17179584.008000] PCI: setting IRQ 4 as level-triggered
[17179584.008000] ACPI: PCI Interrupt :02:01.0[A] - Link [LNKC] - GSI
4 (level, low) - IRQ 4
[17179584.008000] saa7146: found saa7146 @ mem f8904000 (revision 1, irq 4)
(0x13c2,0x1005).
[17179584.008000] saa7146 (0): dma buffer size 192512
[17179584.008000] DVB: registering new adapter (TT-Budget/WinTV-NOVA-T
PCI).
[17179584.044000] adapter has MAC addr = 00:d0:5c:21:2a:b6
[17179584.108000] bttv: driver version 0.9.16 loaded
[17179584.108000] bttv: using 8 buffers with 2080k (520 pages) each for
capture
[17179584.12] DVB: registering frontend 0 (LSI L64781 DVB-T)...
[17179584.12] bttv: Bt8xx card found (0).
[17179584.12] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 7
[17179584.12] PCI: setting IRQ 7 as level-triggered
[17179584.12] ACPI: PCI Interrupt :02:03.0[A] - Link [LNKF] - GSI
7 (level, low) - IRQ 7
[17179584.12] bttv0: Bt878 (rev 17) at :02:03.0, irq: 7, latency:
32, mmio: 0xec001000
[17179584.12] bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI
subsystem ID is 1822:0001
[17179584.12] bttv0: using: Twinhan DST + clones [card=113,autodetected]
[17179584.12] bttv0: gpio: en=, out= in=00f3edfe [init]
[17179584.12] bttv0: using tuner=4
[17179584.148000] bttv0: add subdevice dvb0
[17179584.148000] bttv: Bt8xx card found (1).
[17179584.148000] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 5
[17179584.148000] PCI: setting IRQ 5 as level-triggered
[17179584.148000] ACPI: PCI Interrupt :02:04.0[A] - Link [LNK0] - GSI
5 (level, low) - IRQ 5
[17179584.148000] bttv1: Bt878 (rev 17) at :02:04.0, irq: 5, latency:
32, mmio: 0xec003000
[17179584.148000] bttv1: detected: Twinhan VisionPlus DVB [card=113], PCI
subsystem ID is 1822:0001
[17179584.148000] bttv1: using: Twinhan DST + clones [card=113,autodetected]
[17179584.148000] bttv1: gpio: en=, out= in=00f3edfe [init]
[17179584.148000] bttv1: using tuner=4
[17179584.164000] bttv1: add subdevice dvb1
[17179584.164000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[17179584.164000] PCI: setting IRQ 10 as level-triggered
[17179584.164000] ACPI: PCI Interrupt :02:00.0[A] - Link [LNKB] - GSI
10 (level, low) - IRQ 10
[17179584.164000] 3c59x: Donald Becker and others.
www.scyld.com/network/vortex.html
[17179584.164000] :02:00.0: 3Com PCI 3c905C Tornado at f8b16000.
[17179584.188000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
[17179584.188000] PCI: setting IRQ 3 as level-triggered
[17179584.188000] ACPI: PCI Interrupt :02:02.0[A] - Link [LNKD] - GSI
3 (level, low) - IRQ 3
[17179584.188000] Mantis Rev 1, irq: 3, latency: 32
[17179584.188000]  memory: 0xec00, mmio: 0xf8966000
[17179584.24] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179584.244000] sd 0:0:1:0: Attached scsi generic sg1 type 0
[17179584.256000] bt878: AUDIO driver version 0.0.0 loaded
[17179584.264000] ACPI: PCI Interrupt :02:00.0[A] - Link [LNKB] - GSI
10 (level, low) - IRQ 10
[17179584.268000] eth0:  setting full-duplex.
[17179584.356000] get_mac_address (1): MAC Address=[00:08:ca:00:00:00]
[17179584.428000] get_subvendor_id (1): Sub Vendor ID=[0x1822]
[17179584.50] get_subdevice_id (1): Sub Device ID=[0x0028]
[17179584.50] mantis_alloc_buffers (1): DMA=0x37a2 cpu=0xf7a2
size=65536
[17179584.50] mantis_alloc_buffers (1): RISC=0x190a000 cpu=0xc190a000
size=1000
[17179584.50] DVB: registering new adapter (Mantis dvb adapter).
[17179584.628000] NET: Registered protocol family 10
[17179584.628000] lo: Disabled Privacy Extensions
[17179584.628000] IPv6 over IPv4 tunneling driver
[17179585.02]

Re: [linux-dvb] Twinhan DTV Ter 3028 frontend

2007-03-17 Thread Manu Abraham 

On 3/17/07, Simeon Walker [EMAIL PROTECTED] wrote:

Hi,

I have the Twinhan DTV Ter 3028 and have downloaded the mantis.tar.bz2. I
compiled and installed the drivers under 2.6.17 (Ubuntu Edgy). That much
went fine.

The problem is that no frontend is found in the /dev/dvb/adapter directory.
Is this card supported? Does anyone know which frontend should be in use?



It is not yet supported. The frontend on the card is the zl10353 chip
from Zarlink.


manu

___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb