Re: libata not working for sis5533
Chuck Ebbert ha scritto: On 08/31/2007 06:20 PM, Patrizio Bassi wrote: Patrizio Bassi ha scritto: Michal Piotrowski ha scritto: Hi, [Adding IDE wizards to CC] On 26/08/07, Patrizio Bassi [EMAIL PROTECTED] wrote: My sis630 chipset shipped with Asus A1000 doesn't work properly with suspend with ide drivers (http://bugzilla.kernel.org/show_bug.cgi?id=7077) i tried to switch to libata but i cannot boot. I've enabled generic ide and sis specific code, both in-kernel. of course scsi too. when i boot i get: irq #14 nobody cared and stop i have to remove battery to reboot pc. I'm using 2.6.22.5, but i never got any libata kernel working. Patrizio ps. i'm writing from my desktop as i'm doing hardware mainteinance on the laptop and could not boot it Please CC me. lspci: 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11) 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 80) 00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) 00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 01) 00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) 00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80) 00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80) 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter (rev 11) Regards, Michal i've been out for a week, but found no notice, did i lost any email or no activity on this issue? I assume you tried the standard workarounds, like pci=nommconf,nomsi pci=noacpi pci=biosirq (one at at time, not all at once.) I waited 2.6.23 to be out and tried again, but still no chance to get libata working for my notebook. Anything i can try? --- Patrizio Bassi www.patriziobassi.it - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: libata not working for sis5533
Chuck Ebbert ha scritto: On 08/31/2007 06:20 PM, Patrizio Bassi wrote: Patrizio Bassi ha scritto: Michal Piotrowski ha scritto: Hi, [Adding IDE wizards to CC] On 26/08/07, Patrizio Bassi [EMAIL PROTECTED] wrote: My sis630 chipset shipped with Asus A1000 doesn't work properly with suspend with ide drivers (http://bugzilla.kernel.org/show_bug.cgi?id=7077) i tried to switch to libata but i cannot boot. I've enabled generic ide and sis specific code, both in-kernel. of course scsi too. when i boot i get: irq #14 nobody cared and stop i have to remove battery to reboot pc. I'm using 2.6.22.5, but i never got any libata kernel working. Patrizio ps. i'm writing from my desktop as i'm doing hardware mainteinance on the laptop and could not boot it Please CC me. lspci: 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11) 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 80) 00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) 00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 01) 00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) 00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80) 00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80) 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter (rev 11) Regards, Michal i've been out for a week, but found no notice, did i lost any email or no activity on this issue? I assume you tried the standard workarounds, like pci=nommconf,nomsi pci=noacpi pci=biosirq (one at at time, not all at once.) i just fineshed to try (had an hardware problem, could not be faster) but got no results :( libata is unusable on my system. i'll wait 2.6.23 to be out to try again. -- Patrizio Bassi www.patriziobassi.it - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: libata not working for sis5533
On Sep 11 2007 15:46, Andrew Morton wrote: Patrizio Bassi [EMAIL PROTECTED] wrote: Jan Engelhardt ha scritto: On Sep 8 2007 11:38, Patrizio Bassi wrote: Jan Engelhardt wrote: I shall give this a spin too, since I happen to have sis5513. Just booted this fresh ata-enabled system (a matter of mkinitrd). It has not exploded yet. don't you have the irq 14 issue? No, does not seem so. For Alan, libata devs...hope can help debug... this is http://www.patriziobassi.it/downloads/libata_issue.jpg Looks more like a platform irq routing issue than an ata issue. Perhaps an x86 or an acpi person can help out with this. Patrizio, have you tried with the old IDE? (And without suspend at that...) Jan -- - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: libata not working for sis5533
Jan Engelhardt ha scritto: On Sep 11 2007 15:46, Andrew Morton wrote: Patrizio Bassi [EMAIL PROTECTED] wrote: Jan Engelhardt ha scritto: On Sep 8 2007 11:38, Patrizio Bassi wrote: Jan Engelhardt wrote: I shall give this a spin too, since I happen to have sis5513. Just booted this fresh ata-enabled system (a matter of mkinitrd). It has not exploded yet. don't you have the irq 14 issue? No, does not seem so. For Alan, libata devs...hope can help debug... this is http://www.patriziobassi.it/downloads/libata_issue.jpg Looks more like a platform irq routing issue than an ata issue. Perhaps an x86 or an acpi person can help out with this. Patrizio, have you tried with the old IDE? (And without suspend at that...) yes yes old IDE works ok, but the suspend functionality is broken so, as i compile scsi subsystem for usb-storage i wanted to move to the new libata, but i found this issue... Patrizio - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: libata not working for sis5533
On Sep 12 2007 20:49, Patrizio Bassi wrote: Looks more like a platform irq routing issue than an ata issue. Perhaps an x86 or an acpi person can help out with this. Patrizio, have you tried with the old IDE? (And without suspend at that...) yes yes old IDE works ok, but the suspend functionality is broken Well, that is a starting point. Now it is time for some ide dev :) Jan -- - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: libata not working for sis5533
Hi, On Wednesday 12 September 2007, Patrizio Bassi wrote: Jan Engelhardt ha scritto: On Sep 11 2007 15:46, Andrew Morton wrote: Patrizio Bassi [EMAIL PROTECTED] wrote: Jan Engelhardt ha scritto: On Sep 8 2007 11:38, Patrizio Bassi wrote: Jan Engelhardt wrote: I shall give this a spin too, since I happen to have sis5513. Just booted this fresh ata-enabled system (a matter of mkinitrd). It has not exploded yet. don't you have the irq 14 issue? No, does not seem so. For Alan, libata devs...hope can help debug... this is http://www.patriziobassi.it/downloads/libata_issue.jpg Looks more like a platform irq routing issue than an ata issue. Perhaps an x86 or an acpi person can help out with this. Patrizio, have you tried with the old IDE? (And without suspend at that...) yes yes old IDE works ok, but the suspend functionality is broken so, as i compile scsi subsystem for usb-storage i wanted to move to the new libata, but i found this issue... w.r.t. to suspend problem (http://bugzilla.kernel.org/show_bug.cgi?id=7077): please try latest -mm kernel, it contains many fixes for sis5513 host driver. Thanks, Bart - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: libata not working for sis5533
On 08/31/2007 06:20 PM, Patrizio Bassi wrote: Patrizio Bassi ha scritto: Michal Piotrowski ha scritto: Hi, [Adding IDE wizards to CC] On 26/08/07, Patrizio Bassi [EMAIL PROTECTED] wrote: My sis630 chipset shipped with Asus A1000 doesn't work properly with suspend with ide drivers (http://bugzilla.kernel.org/show_bug.cgi?id=7077) i tried to switch to libata but i cannot boot. I've enabled generic ide and sis specific code, both in-kernel. of course scsi too. when i boot i get: irq #14 nobody cared and stop i have to remove battery to reboot pc. I'm using 2.6.22.5, but i never got any libata kernel working. Patrizio ps. i'm writing from my desktop as i'm doing hardware mainteinance on the laptop and could not boot it Please CC me. lspci: 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11) 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 80) 00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) 00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 01) 00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) 00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80) 00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80) 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter (rev 11) Regards, Michal i've been out for a week, but found no notice, did i lost any email or no activity on this issue? I assume you tried the standard workarounds, like pci=nommconf,nomsi pci=noacpi pci=biosirq (one at at time, not all at once.) - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: libata not working for sis5533
On Sun, 09 Sep 2007 13:35:26 +0200 Patrizio Bassi [EMAIL PROTECTED] wrote: Patrizio Bassi ha scritto: Jan Engelhardt ha scritto: On Sep 8 2007 11:38, Patrizio Bassi wrote: Jan Engelhardt wrote: I shall give this a spin too, since I happen to have sis5513. Just booted this fresh ata-enabled system (a matter of mkinitrd). It has not exploded yet. don't you have the irq 14 issue? No, does not seem so. can you post here your .config? http://rafb.net/p/vfTX0966.html Maybe it is solved in 2.6.22.3? (I don't remember what your version was.) Jan For Alan, libata devs...hope can help debug... this is http://www.patriziobassi.it/downloads/libata_issue.jpg Looks more like a platform irq routing issue than an ata issue. Perhaps an x86 or an acpi person can help out with this. Probably nothing will happen, in which case I'll get back to you later and ask you to raise a bugzilla entry, not that this will get it fixed :( and this is the relative config i'm using http://www.patriziobassi.it/downloads/config Let me know Patrizio more debug: I tried as suggested with the irqpoll option, i just get a faster panic as i don't have the 3 xfermode lines...but always impossibile to boot... Patrizio - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: libata not working for sis5533
Jan Engelhardt ha scritto: On Sep 8 2007 11:38, Patrizio Bassi wrote: Jan Engelhardt wrote: I shall give this a spin too, since I happen to have sis5513. Just booted this fresh ata-enabled system (a matter of mkinitrd). It has not exploded yet. don't you have the irq 14 issue? No, does not seem so. can you post here your .config? http://rafb.net/p/vfTX0966.html Maybe it is solved in 2.6.22.3? (I don't remember what your version was.) Jan For Alan, libata devs...hope can help debug... this is http://www.patriziobassi.it/downloads/libata_issue.jpg and this is the relative config i'm using http://www.patriziobassi.it/downloads/config Let me know Patrizio - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: libata not working for sis5533
Patrizio Bassi ha scritto: Jan Engelhardt ha scritto: On Sep 8 2007 11:38, Patrizio Bassi wrote: Jan Engelhardt wrote: I shall give this a spin too, since I happen to have sis5513. Just booted this fresh ata-enabled system (a matter of mkinitrd). It has not exploded yet. don't you have the irq 14 issue? No, does not seem so. can you post here your .config? http://rafb.net/p/vfTX0966.html Maybe it is solved in 2.6.22.3? (I don't remember what your version was.) Jan For Alan, libata devs...hope can help debug... this is http://www.patriziobassi.it/downloads/libata_issue.jpg and this is the relative config i'm using http://www.patriziobassi.it/downloads/config Let me know Patrizio more debug: I tried as suggested with the irqpoll option, i just get a faster panic as i don't have the 3 xfermode lines...but always impossibile to boot... Patrizio - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: libata not working for sis5533
On Sep 2 2007 11:40, Alan Cox wrote: i've been out for a week, but found no notice, did i lost any email or no activity on this issue? I tagged it onto the obscure IDE report pile. It doesn't contain any really useful information and its probably not an IDE layer bug as of itself. But its on the todo list for further investigation and to see if patterns emerge I shall give this a spin too, since I happen to have sis5513. Just booted this fresh ata-enabled system (a matter of mkinitrd). It has not exploded yet. Jan -- - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: libata not working for sis5533
On Sep 8 2007 11:38, Patrizio Bassi wrote: Jan Engelhardt wrote: I shall give this a spin too, since I happen to have sis5513. Just booted this fresh ata-enabled system (a matter of mkinitrd). It has not exploded yet. don't you have the irq 14 issue? No, does not seem so. can you post here your .config? http://rafb.net/p/vfTX0966.html Maybe it is solved in 2.6.22.3? (I don't remember what your version was.) Jan -- - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: libata not working for sis5533
On Sep 2 2007 11:40, Alan Cox wrote: i've been out for a week, but found no notice, did i lost any email or no activity on this issue? I tagged it onto the obscure IDE report pile. It doesn't contain any really useful information and its probably not an IDE layer bug as of itself. But its on the todo list for further investigation and to see if patterns emerge I shall give this a spin too, since I happen to have sis5513. Jan -- - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: libata not working for sis5533
Jan Engelhardt ha scritto: On Sep 2 2007 11:40, Alan Cox wrote: i've been out for a week, but found no notice, did i lost any email or no activity on this issue? I tagged it onto the obscure IDE report pile. It doesn't contain any really useful information and its probably not an IDE layer bug as of itself. But its on the todo list for further investigation and to see if patterns emerge I shall give this a spin too, since I happen to have sis5513. oops i just noticed i made a typo in the subject...5513 for me too Patrizio - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: libata not working for sis5533
i've been out for a week, but found no notice, did i lost any email or no activity on this issue? I tagged it onto the obscure IDE report pile. It doesn't contain any really useful information and its probably not an IDE layer bug as of itself. But its on the todo list for further investigation and to see if patterns emerge - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: libata not working for sis5533
Patrizio Bassi ha scritto: Michal Piotrowski ha scritto: Hi, [Adding IDE wizards to CC] On 26/08/07, Patrizio Bassi [EMAIL PROTECTED] wrote: My sis630 chipset shipped with Asus A1000 doesn't work properly with suspend with ide drivers (http://bugzilla.kernel.org/show_bug.cgi?id=7077) i tried to switch to libata but i cannot boot. I've enabled generic ide and sis specific code, both in-kernel. of course scsi too. when i boot i get: irq #14 nobody cared and stop i have to remove battery to reboot pc. I'm using 2.6.22.5, but i never got any libata kernel working. Patrizio ps. i'm writing from my desktop as i'm doing hardware mainteinance on the laptop and could not boot it Please CC me. lspci: 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11) 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 80) 00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) 00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 01) 00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) 00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80) 00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80) 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter (rev 11) Regards, Michal i've been out for a week, but found no notice, did i lost any email or no activity on this issue? Patrizio - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
