Re: uli526x link problem solved, fix not on 2.6.25-rc2
El Sun, 17 Feb 2008 10:42:25 +0100 Santiago Garcia Mantinan <[EMAIL PROTECTED]> escribió: > Hi! > > There was a problem that affected all tulip based drivers and which has been > fixed in most of them, for uli526x the problem remains on 2.6.25-rc2 as the > fix has not yet been applied. > > A discusion of this bug and the patch to fix it is at > http://bugzilla.kernel.org/show_bug.cgi?id=5839 > Several people including myself have tested the patch and have stated that > it works ok. > > I would encourage people with the proper permissions to submit this patch so > that it ends up on 2.6.25. Maybe CCing Jeff Garzik (manteiner) helps on this regard. > > Thanks in advance! > > Regards... -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: uli526x link problem solved, fix not on 2.6.25-rc2
El Sun, 17 Feb 2008 10:42:25 +0100 Santiago Garcia Mantinan [EMAIL PROTECTED] escribió: Hi! There was a problem that affected all tulip based drivers and which has been fixed in most of them, for uli526x the problem remains on 2.6.25-rc2 as the fix has not yet been applied. A discusion of this bug and the patch to fix it is at http://bugzilla.kernel.org/show_bug.cgi?id=5839 Several people including myself have tested the patch and have stated that it works ok. I would encourage people with the proper permissions to submit this patch so that it ends up on 2.6.25. Maybe CCing Jeff Garzik (manteiner) helps on this regard. Thanks in advance! Regards... -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [Bugme-new] [Bug 9906] New: Weird hang with NPTL and SIGPROF.
El Thu, 7 Feb 2008 10:56:16 -0500 (EST) Parag Warudkar <[EMAIL PROTECTED]> escribió: > > > On Thu, 7 Feb 2008, Parag Warudkar wrote: > > >x86_64+SMP+PREEMPT+GnuC-4.1.2+Glibc-2.5 = Reproducible. > > > That should of course be > x86_64+SMP+PREEMPT+GnuC-4.1.3+Glibc-2.6.1 = Reproducible. > >From my previous mail Note that i use CC=gcc-4.2 $gcc-4.2 --version gcc-4.2 (GCC) 4.2.1 (Ubuntu 4.2.1-5ubuntu4) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [Bugme-new] [Bug 9906] New: Weird hang with NPTL and SIGPROF.
El Wed, 6 Feb 2008 21:57:38 -0500 (EST) Parag Warudkar <[EMAIL PROTECTED]> escribió: > > > On Wed, 6 Feb 2008, Frank Mayhar wrote: > > > On Wed, 2008-02-06 at 16:50 -0800, Andrew Morton wrote: > > > It's probably better to handle this one via email, so please send that > > > testcase vie reply-to-all to this email, thanks. > > > > Testcase attached. > > > > Build with > > gcc -D_GNU_SOURCE -c hangc-2.c -o hangc-2.o > > gcc -lpthread -o hangc-2 hangc-2.o > > > > Run with > > hangc-2 4500 4500 > > FWIW this is not reproducible on 2.6.24/x86/CentOS-51. (I tried running > it nearly 1500 times in a loop.) Assuming those many tries are sufficient > to reproduce this bug, there seems to be something specific to the > environment/architecture/configuration that's necessary to trigger it. > > It might be helpful to provide full details like glibc version, compiler > version, .config etc. I can reproduce it on my Ubuntu 7.10 kernel 2.6.24 Note i use CC=gcc-4.2 gcc --version gcc-4.2 (GCC) 4.2.1 (Ubuntu 4.2.1-5ubuntu4) If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux Varda 2.6.24 #2 SMP PREEMPT Fri Jan 25 01:05:47 CET 2008 x86_64 GNU/Linux Gnu C 4.1.3 Gnu make 3.81 binutils 2.18 util-linux 2.13 mount 2.13 module-init-tools 3.3-pre2 e2fsprogs 1.40.2 jfsutils 1.1.11 reiserfsprogs 3.6.19 pcmciautils014 PPP2.4.4 Linux C Library2.6.1 Dynamic linker (ldd) 2.6.1 Procps 3.2.7 Net-tools 1.60 Kbd[opcion...][archivo Console-tools 0.2.3 Sh-utils 5.97 udev 113 wireless-tools 29 Modules Loaded af_packet binfmt_misc rfcomm l2cap bluetooth ipv6 powernow_k8 cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand freq_table cpufreq_conservative nf_conntrack_ftp nf_conntrack_irc xt_tcpudp ipt_ULOG xt_limit xt_state iptable_filter nf_conntrack_ipv4 nf_conntrack ip_tables x_tables kvm_amd kvm w83627ehf hwmon_vid lp snd_hda_intel arc4 ecb blkcipher cryptomgr crypto_algapi snd_pcm_oss snd_mixer_oss snd_pcm snd_mpu401 snd_mpu401_uart snd_seq_dummy rt2500pci rt2x00pci rt2x00lib snd_seq_oss rfkill snd_seq_midi input_polldev snd_rawmidi crc_itu_t snd_seq_midi_event snd_seq mac80211 usbhid snd_timer snd_seq_device cfg80211 usblp ff_memless snd eeprom_93cx6 nvidia i2c_ali1535 i2c_ali15x3 evdev snd_page_alloc sr_mod cdrom button soundcore uli526x 8250_pnp 8250 serial_core i2c_core k8temp hwmon parport_pc parport pata_acpi pcspkr rtc floppy sg ata_generic ehci_hcd r8169 ohci_hcd usbcore unix thermal processor fan fuse # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24-rc8 # Thu Jan 24 19:29:41 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_ZONE_DMA=y # CONFIG_QUICKLIST is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 # CONFIG_CGROUPS is not set CONFIG_FAIR_GROUP_SCHED=y CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y
Re: [Bugme-new] [Bug 9906] New: Weird hang with NPTL and SIGPROF.
El Thu, 7 Feb 2008 10:56:16 -0500 (EST) Parag Warudkar [EMAIL PROTECTED] escribió: On Thu, 7 Feb 2008, Parag Warudkar wrote: x86_64+SMP+PREEMPT+GnuC-4.1.2+Glibc-2.5 = Reproducible. That should of course be x86_64+SMP+PREEMPT+GnuC-4.1.3+Glibc-2.6.1 = Reproducible. From my previous mail Note that i use CC=gcc-4.2 $gcc-4.2 --version gcc-4.2 (GCC) 4.2.1 (Ubuntu 4.2.1-5ubuntu4) -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [Bugme-new] [Bug 9906] New: Weird hang with NPTL and SIGPROF.
El Wed, 6 Feb 2008 21:57:38 -0500 (EST) Parag Warudkar [EMAIL PROTECTED] escribió: On Wed, 6 Feb 2008, Frank Mayhar wrote: On Wed, 2008-02-06 at 16:50 -0800, Andrew Morton wrote: It's probably better to handle this one via email, so please send that testcase vie reply-to-all to this email, thanks. Testcase attached. Build with gcc -D_GNU_SOURCE -c hangc-2.c -o hangc-2.o gcc -lpthread -o hangc-2 hangc-2.o Run with hangc-2 4500 4500 FWIW this is not reproducible on 2.6.24/x86/CentOS-51. (I tried running it nearly 1500 times in a loop.) Assuming those many tries are sufficient to reproduce this bug, there seems to be something specific to the environment/architecture/configuration that's necessary to trigger it. It might be helpful to provide full details like glibc version, compiler version, .config etc. I can reproduce it on my Ubuntu 7.10 kernel 2.6.24 Note i use CC=gcc-4.2 gcc --version gcc-4.2 (GCC) 4.2.1 (Ubuntu 4.2.1-5ubuntu4) If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux Varda 2.6.24 #2 SMP PREEMPT Fri Jan 25 01:05:47 CET 2008 x86_64 GNU/Linux Gnu C 4.1.3 Gnu make 3.81 binutils 2.18 util-linux 2.13 mount 2.13 module-init-tools 3.3-pre2 e2fsprogs 1.40.2 jfsutils 1.1.11 reiserfsprogs 3.6.19 pcmciautils014 PPP2.4.4 Linux C Library2.6.1 Dynamic linker (ldd) 2.6.1 Procps 3.2.7 Net-tools 1.60 Kbd[opcion...][archivo Console-tools 0.2.3 Sh-utils 5.97 udev 113 wireless-tools 29 Modules Loaded af_packet binfmt_misc rfcomm l2cap bluetooth ipv6 powernow_k8 cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand freq_table cpufreq_conservative nf_conntrack_ftp nf_conntrack_irc xt_tcpudp ipt_ULOG xt_limit xt_state iptable_filter nf_conntrack_ipv4 nf_conntrack ip_tables x_tables kvm_amd kvm w83627ehf hwmon_vid lp snd_hda_intel arc4 ecb blkcipher cryptomgr crypto_algapi snd_pcm_oss snd_mixer_oss snd_pcm snd_mpu401 snd_mpu401_uart snd_seq_dummy rt2500pci rt2x00pci rt2x00lib snd_seq_oss rfkill snd_seq_midi input_polldev snd_rawmidi crc_itu_t snd_seq_midi_event snd_seq mac80211 usbhid snd_timer snd_seq_device cfg80211 usblp ff_memless snd eeprom_93cx6 nvidia i2c_ali1535 i2c_ali15x3 evdev snd_page_alloc sr_mod cdrom button soundcore uli526x 8250_pnp 8250 serial_core i2c_core k8temp hwmon parport_pc parport pata_acpi pcspkr rtc floppy sg ata_generic ehci_hcd r8169 ohci_hcd usbcore unix thermal processor fan fuse # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24-rc8 # Thu Jan 24 19:29:41 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_ZONE_DMA=y # CONFIG_QUICKLIST is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST=/lib/modules/$UNAME_RELEASE/.config # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION= CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 # CONFIG_CGROUPS is not set CONFIG_FAIR_GROUP_SCHED=y CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE= # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y
Re: [2.6 patch] remove smbfs
El Tue, 5 Feb 2008 00:18:05 -0800
Andrew Morton <[EMAIL PROTECTED]> escribió:
> struct smb_fattr root;
> int ver;
> void *mem;
> + static int warn_count;
> +
> + if (warn_count < 5) {
> + warn_count++;
> + printk(KERN_EMERG "smbfs is deprecated and will be removed in"
> + " December, 2006. Please migrate to cifs\n");
Surely you mean ??? ¿2008?
> + }
>
> if (!raw_data)
> goto out_no_data;
> _
>
>
> queued for over 1.5 years waiting for the go-ahead from Steve.
>
> It looks like it's time? If so, what should I set the date to?
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: [2.6 patch] remove smbfs
El Tue, 5 Feb 2008 00:18:05 -0800
Andrew Morton [EMAIL PROTECTED] escribió:
struct smb_fattr root;
int ver;
void *mem;
+ static int warn_count;
+
+ if (warn_count 5) {
+ warn_count++;
+ printk(KERN_EMERG smbfs is deprecated and will be removed in
+ December, 2006. Please migrate to cifs\n);
Surely you mean ??? ¿2008?
+ }
if (!raw_data)
goto out_no_data;
_
queued for over 1.5 years waiting for the go-ahead from Steve.
It looks like it's time? If so, what should I set the date to?
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[PATCH] sata_via.c: Remove missleading comment.
Maybe for the trivial tree... sata_via.c has PATA support since: d73f30e1c9a9af14757fa5bf4014343926047156 sata_via: PATA support AFAICS so the TODO list is no longer true. --- diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 3ef072f..30caa03 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -30,8 +30,6 @@ * Hardware documentation available under NDA. * * - * To-do list: - * - VT6421 PATA support * */ signature.asc Description: Esta parte del mensaje está firmada digitalmente
[PATCH] sata_via.c: Remove missleading comment.
Maybe for the trivial tree... sata_via.c has PATA support since: d73f30e1c9a9af14757fa5bf4014343926047156 sata_via: PATA support AFAICS so the TODO list is no longer true. --- diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 3ef072f..30caa03 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -30,8 +30,6 @@ * Hardware documentation available under NDA. * * - * To-do list: - * - VT6421 PATA support * */ signature.asc Description: Esta parte del mensaje está firmada digitalmente
Re: how to tell i386 from x86-64 kernel
El Fri, 1 Feb 2008 01:59:03 +0100 (CET) Jan Engelhardt <[EMAIL PROTECTED]> escribió: > > # uname -m > I won't tell you. > # linux32 uname -m > i686 Ubuntu 7.10 64 bit userland 2.6.24 $ uname -m x86_64 $ linux32 uname -m i686 > > Now what? :-) > > Well, the answer is simple, a 64-bit kernel will allow you > (minus selinux voodoo) to load 64-bit binaries. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: how to tell i386 from x86-64 kernel
El Fri, 1 Feb 2008 01:59:03 +0100 (CET) Jan Engelhardt [EMAIL PROTECTED] escribió: # uname -m I won't tell you. # linux32 uname -m i686 Ubuntu 7.10 64 bit userland 2.6.24 $ uname -m x86_64 $ linux32 uname -m i686 Now what? :-) Well, the answer is simple, a 64-bit kernel will allow you (minus selinux voodoo) to load 64-bit binaries. -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Section Missmatch in current git
Just one more try Ubuntu x86_64 gcc-4.2 WARNING: vmlinux.o(.text.head+0xe4): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64') WARNING: vmlinux.o(.text.head+0xeb): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64') Config Follows # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24-rc8 # Fri Jan 18 21:26:22 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_ZONE_DMA=y # CONFIG_QUICKLIST is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 # CONFIG_CGROUPS is not set CONFIG_FAIR_GROUP_SCHED=y CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=m CONFIG_IOSCHED_CFQ=m CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_PREEMPT_NOTIFIERS=y # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_X86_VSMP is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set CONFIG_MK8=y # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_HPET_TIMER=y CONFIG_GART_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_BKL=y
Section Missmatch in current git
Just one more try Ubuntu x86_64 gcc-4.2 WARNING: vmlinux.o(.text.head+0xe4): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64') WARNING: vmlinux.o(.text.head+0xeb): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64') Config Follows # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24-rc8 # Fri Jan 18 21:26:22 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_ZONE_DMA=y # CONFIG_QUICKLIST is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST=/lib/modules/$UNAME_RELEASE/.config # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION= CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 # CONFIG_CGROUPS is not set CONFIG_FAIR_GROUP_SCHED=y CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE= # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=m CONFIG_IOSCHED_CFQ=m CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED=anticipatory CONFIG_PREEMPT_NOTIFIERS=y # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_X86_VSMP is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set CONFIG_MK8=y # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_HPET_TIMER=y CONFIG_GART_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_BKL=y CONFIG_X86_LOCAL_APIC=y
Re: Spammed logs again rt2500pci 2.6.24-rc8
El Fri, 18 Jan 2008 11:56:05 +0100 Mattias Nissler <[EMAIL PROTECTED]> escribió: > Hi, > > we currently think this is due to a race condition in the packet queue > code. Ivo is currently reworking the packet queues, which I hope will > resolve this situation. Thanks for the quick answer. > > Mattias Regards; Alejandro > > On Thu, 2008-01-17 at 22:57 +0100, Alejandro Riveira Fernández wrote: > > Running > > > > Linux Varda 2.6.24-rc8 #1 SMP PREEMPT Wed Jan 16 15:09:43 CET 2008 x86_64 > > GNU/Linux > > > > my logs are spmmed with: > > > > > > [20126.343240] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free > > entry in the non-full queue 1. > > [20126.343242] Please file bug report to http://rt2x00.serialmonkey.com. > > [20126.848277] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free > > entry in the non-full queue 1. > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: Spammed logs again rt2500pci 2.6.24-rc8
El Fri, 18 Jan 2008 11:56:05 +0100 Mattias Nissler [EMAIL PROTECTED] escribió: Hi, we currently think this is due to a race condition in the packet queue code. Ivo is currently reworking the packet queues, which I hope will resolve this situation. Thanks for the quick answer. Mattias Regards; Alejandro On Thu, 2008-01-17 at 22:57 +0100, Alejandro Riveira Fernández wrote: Running Linux Varda 2.6.24-rc8 #1 SMP PREEMPT Wed Jan 16 15:09:43 CET 2008 x86_64 GNU/Linux my logs are spmmed with: [20126.343240] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20126.343242] Please file bug report to http://rt2x00.serialmonkey.com. [20126.848277] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Spammed logs again rt2500pci 2.6.24-rc8
Running Linux Varda 2.6.24-rc8 #1 SMP PREEMPT Wed Jan 16 15:09:43 CET 2008 x86_64 GNU/Linux my logs are spmmed with: [20126.343240] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20126.343242] Please file bug report to http://rt2x00.serialmonkey.com. [20126.848277] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20126.848280] Please file bug report to http://rt2x00.serialmonkey.com. [20126.851693] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20126.851696] Please file bug report to http://rt2x00.serialmonkey.com. [20126.851854] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20126.851856] Please file bug report to http://rt2x00.serialmonkey.com. [20126.852082] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20126.852084] Please file bug report to http://rt2x00.serialmonkey.com. [20126.852224] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20126.852226] Please file bug report to http://rt2x00.serialmonkey.com. [20127.349691] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20127.349694] Please file bug report to http://rt2x00.serialmonkey.com. [20127.352425] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20127.352428] Please file bug report to http://rt2x00.serialmonkey.com. [20127.853345] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20127.853348] Please file bug report to http://rt2x00.serialmonkey.com. [20127.853699] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20127.853701] Please file bug report to http://rt2x00.serialmonkey.com. [20128.858569] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20128.858572] Please file bug report to http://rt2x00.serialmonkey.com. [20131.875550] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20131.875554] Please file bug report to http://rt2x00.serialmonkey.com. [20154.693853] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20154.693856] Please file bug report to http://rt2x00.serialmonkey.com. [20185.527974] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20185.527977] Please file bug report to http://rt2x00.serialmonkey.com. [20189.812334] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20189.812337] Please file bug report to http://rt2x00.serialmonkey.com. [20189.812374] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20189.812376] Please file bug report to http://rt2x00.serialmonkey.com. [20189.812507] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20189.812509] Please file bug report to http://rt2x00.serialmonkey.com. [20189.813100] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20189.813102] Please file bug report to http://rt2x00.serialmonkey.com. [20189.813474] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20189.813476] Please file bug report to http://rt2x00.serialmonkey.com. [20189.813909] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20189.813911] Please file bug report to http://rt2x00.serialmonkey.com. [20212.242858] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20212.242861] Please file bug report to http://rt2x00.serialmonkey.com. [20212.243587] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20212.243589] Please file bug report to http://rt2x00.serialmonkey.com. As the last time the thing is triggered with a p2p app making a lot of connections (this time not bt but mldonkey) Back to top View user's profile Send private message -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Spammed logs again rt2500pci 2.6.24-rc8
Running Linux Varda 2.6.24-rc8 #1 SMP PREEMPT Wed Jan 16 15:09:43 CET 2008 x86_64 GNU/Linux my logs are spmmed with: [20126.343240] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20126.343242] Please file bug report to http://rt2x00.serialmonkey.com. [20126.848277] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20126.848280] Please file bug report to http://rt2x00.serialmonkey.com. [20126.851693] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20126.851696] Please file bug report to http://rt2x00.serialmonkey.com. [20126.851854] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20126.851856] Please file bug report to http://rt2x00.serialmonkey.com. [20126.852082] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20126.852084] Please file bug report to http://rt2x00.serialmonkey.com. [20126.852224] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20126.852226] Please file bug report to http://rt2x00.serialmonkey.com. [20127.349691] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20127.349694] Please file bug report to http://rt2x00.serialmonkey.com. [20127.352425] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20127.352428] Please file bug report to http://rt2x00.serialmonkey.com. [20127.853345] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20127.853348] Please file bug report to http://rt2x00.serialmonkey.com. [20127.853699] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20127.853701] Please file bug report to http://rt2x00.serialmonkey.com. [20128.858569] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20128.858572] Please file bug report to http://rt2x00.serialmonkey.com. [20131.875550] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20131.875554] Please file bug report to http://rt2x00.serialmonkey.com. [20154.693853] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20154.693856] Please file bug report to http://rt2x00.serialmonkey.com. [20185.527974] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20185.527977] Please file bug report to http://rt2x00.serialmonkey.com. [20189.812334] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20189.812337] Please file bug report to http://rt2x00.serialmonkey.com. [20189.812374] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20189.812376] Please file bug report to http://rt2x00.serialmonkey.com. [20189.812507] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20189.812509] Please file bug report to http://rt2x00.serialmonkey.com. [20189.813100] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20189.813102] Please file bug report to http://rt2x00.serialmonkey.com. [20189.813474] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20189.813476] Please file bug report to http://rt2x00.serialmonkey.com. [20189.813909] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20189.813911] Please file bug report to http://rt2x00.serialmonkey.com. [20212.242858] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20212.242861] Please file bug report to http://rt2x00.serialmonkey.com. [20212.243587] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 1. [20212.243589] Please file bug report to http://rt2x00.serialmonkey.com. As the last time the thing is triggered with a p2p app making a lot of connections (this time not bt but mldonkey) Back to top View user's profile Send private message -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: section mismatch warning in head_64.S
El Mon, 7 Jan 2008 17:31:39 +0100 Sam Ravnborg <[EMAIL PROTECTED]> escribió: > On Mon, Jan 07, 2008 at 04:53:44PM +0100, Alejandro Riveira Fernández wrote: > > > >MODPOST vmlinux.o > > WARNING: vmlinux.o(.text.head+0xe4): Section mismatch: reference to > > .init.data.2:trampoline_level4_pgt (between 'ident_complete' and > > 'secondary_startup_64') > > WARNING: vmlinux.o(.text.head+0xeb): Section mismatch: reference to > > .init.data.2:trampoline_level4_pgt (between 'ident_complete' and > > 'secondary_startup_64') Still seeing this as of v2.6.24-rc7-205-g5d5d800 (5d5d80001df3fbd06bd2b8893b6e3847e38a12d6) > > Caused by following patch: > commit 1ab60e0f72f71ec54831e525a3e1154f1c092408 > Author: Vivek Goyal <[EMAIL PROTECTED]> > Date: Wed May 2 19:27:07 2007 +0200 > > [PATCH] x86-64: Relocatable Kernel Support > > Vivek - will you look after this? > > Sam # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24-rc7 # Sun Jan 13 19:31:41 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_ZONE_DMA=y # CONFIG_QUICKLIST is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CGROUPS is not set CONFIG_FAIR_GROUP_SCHED=y CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=m CONFIG_IOSCHED_CFQ=m CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_PREEMPT_NOTIFIERS=y # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_X86_VSMP is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set CONFIG_MK8=y # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # C
Re: section mismatch warning in head_64.S
El Mon, 7 Jan 2008 17:31:39 +0100 Sam Ravnborg [EMAIL PROTECTED] escribió: On Mon, Jan 07, 2008 at 04:53:44PM +0100, Alejandro Riveira Fernández wrote: MODPOST vmlinux.o WARNING: vmlinux.o(.text.head+0xe4): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64') WARNING: vmlinux.o(.text.head+0xeb): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64') Still seeing this as of v2.6.24-rc7-205-g5d5d800 (5d5d80001df3fbd06bd2b8893b6e3847e38a12d6) Caused by following patch: commit 1ab60e0f72f71ec54831e525a3e1154f1c092408 Author: Vivek Goyal [EMAIL PROTECTED] Date: Wed May 2 19:27:07 2007 +0200 [PATCH] x86-64: Relocatable Kernel Support Vivek - will you look after this? Sam # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24-rc7 # Sun Jan 13 19:31:41 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_ZONE_DMA=y # CONFIG_QUICKLIST is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST=/lib/modules/$UNAME_RELEASE/.config # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION= CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CGROUPS is not set CONFIG_FAIR_GROUP_SCHED=y CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE= # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=m CONFIG_IOSCHED_CFQ=m CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED=anticipatory CONFIG_PREEMPT_NOTIFIERS=y # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_X86_VSMP is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set CONFIG_MK8=y # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=64
Re: The ext3 way of journalling
El Mon, 14 Jan 2008 11:18:28 -0500 [EMAIL PROTECTED] (Lennart Sorensen) escribió: > On Mon, Jan 14, 2008 at 01:46:56PM +0100, Krzysztof Halasa wrote: > > Nothing will make it work reliably if the system clock isn't stable. > > I remember my nforce2 board having totally insane clock behaviour back > around 2.6.14/2.6.15 or so. It has since been fixed in newer kernels. My experience too with a Uli 1697 based mb. Estrange clock behaviour with kernel around .15-20 but fixed now (suffering too with ext3 fsck now i use jfs) Back in the day i blamed the new mb but now that it runs fine i can only blame the kernel or ubuntu user space. > I seem to recall some ATI chipsets were even more insane than the nvidia > at the time, with some running double speed for the system time. > > -- > Len Sorensen > -- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: The ext3 way of journalling
El Mon, 14 Jan 2008 11:18:28 -0500 [EMAIL PROTECTED] (Lennart Sorensen) escribió: On Mon, Jan 14, 2008 at 01:46:56PM +0100, Krzysztof Halasa wrote: Nothing will make it work reliably if the system clock isn't stable. I remember my nforce2 board having totally insane clock behaviour back around 2.6.14/2.6.15 or so. It has since been fixed in newer kernels. My experience too with a Uli 1697 based mb. Estrange clock behaviour with kernel around .15-20 but fixed now (suffering too with ext3 fsck now i use jfs) Back in the day i blamed the new mb but now that it runs fine i can only blame the kernel or ubuntu user space. I seem to recall some ATI chipsets were even more insane than the nvidia at the time, with some running double speed for the system time. -- Len Sorensen -- -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: Linux 2.6.24-rc7
El Tue, 8 Jan 2008 16:30:30 +0100 Michael Buesch <[EMAIL PROTECTED]> escribió: > On Monday 07 January 2008 21:23:44 Alejandro Riveira Fernández wrote: > > > > > How can I check? The source code I build does indeed have the line > > you quoted on net/mac80211/rx.c:1486 Is that what you are asking for? > > > > WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3); > > Yes fine. > Patches are on their way. Ignore the warning for now. It is harmless. > Thank you very much for your time. Keep on the good work :) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: smpboot_64 section mismatch warning
El Mon, 07 Jan 2008 23:27:35 + David Howells <[EMAIL PROTECTED]> escribió: > Sam Ravnborg <[EMAIL PROTECTED]> wrote: > > > David - will you look into this? > > Do you have a config? > > David My config follows: # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24-rc6 # Sun Jan 6 17:11:46 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_ZONE_DMA=y # CONFIG_QUICKLIST is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CGROUPS is not set CONFIG_FAIR_GROUP_SCHED=y CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=m CONFIG_IOSCHED_CFQ=m CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_PREEMPT_NOTIFIERS=y # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_X86_VSMP is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set CONFIG_MK8=y # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_HPET_TIMER=y CONFIG_GART_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_BKL=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_MCE=y # CONFIG_X86_MCE_INTEL is not set CONFIG_X86_MCE_AMD=y # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y
Re: smpboot_64 section mismatch warning
El Mon, 07 Jan 2008 23:27:35 + David Howells [EMAIL PROTECTED] escribió: Sam Ravnborg [EMAIL PROTECTED] wrote: David - will you look into this? Do you have a config? David My config follows: # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24-rc6 # Sun Jan 6 17:11:46 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_ZONE_DMA=y # CONFIG_QUICKLIST is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST=/lib/modules/$UNAME_RELEASE/.config # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION= CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CGROUPS is not set CONFIG_FAIR_GROUP_SCHED=y CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE= # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=m CONFIG_IOSCHED_CFQ=m CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED=anticipatory CONFIG_PREEMPT_NOTIFIERS=y # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_X86_VSMP is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set CONFIG_MK8=y # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_HPET_TIMER=y CONFIG_GART_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_BKL=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_MCE=y # CONFIG_X86_MCE_INTEL is not set CONFIG_X86_MCE_AMD=y # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y # CONFIG_NUMA
Re: Linux 2.6.24-rc7
El Tue, 8 Jan 2008 16:30:30 +0100 Michael Buesch [EMAIL PROTECTED] escribió: On Monday 07 January 2008 21:23:44 Alejandro Riveira Fernández wrote: How can I check? The source code I build does indeed have the line you quoted on net/mac80211/rx.c:1486 Is that what you are asking for? WARN_ON_ONCE(((unsigned long)(skb-data + hdrlen)) 3); Yes fine. Patches are on their way. Ignore the warning for now. It is harmless. Thank you very much for your time. Keep on the good work :) -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: Linux 2.6.24-rc7
El Mon, 7 Jan 2008 18:30:51 +0100 Michael Buesch <[EMAIL PROTECTED]> escribió: > On Monday 07 January 2008 17:52:48 Alejandro Riveira Fernández wrote: > > El Mon, 7 Jan 2008 17:24:03 +0100 > > Michael Buesch <[EMAIL PROTECTED]> escribió: > > > > > > > > > > > > Can you post the lines above this? > > > This might be a WARN_ON_ONCE() triggering, for which fixes are on their > > > way into > > > the wireless-2.6 tree. > > > > This? > > > > > > [ 37.043990] WARNING: at > > /home/alex/kernel/linux-2.6/net/mac80211/rx.c:1486 __ieee80211_rx() > > [ 37.043996] Pid: 0, comm: swapper Not tainted 2.6.24-rc7 #3 > > > > [ 37.043998] > > > > [ 37.043999] Call Trace: > > > > [ 37.044001][] enqueue_task+0x13/0x30 > > > > [ 37.044040] [] :mac80211:__ieee80211_rx+0xc7e/0xd30 > > > > [ 37.044044] [] activate_task+0x32/0x50 > > > > [ 37.044073] [] > > :mac80211:ieee80211_tasklet_handler+0xbb/0x120 > > > > [ 37.044086] [] tasklet_action+0x48/0xb0 > > > > [ 37.044091] [] __do_softirq+0x69/0xe0 > > > > [ 37.044097] [] call_softirq+0x1c/0x30 > > > > [ 37.044101] [] do_softirq+0x35/0x90 > > > > [ 37.044105] [] irq_exit+0x95/0xa0 > > > > [ 37.044108] [] do_IRQ+0x80/0x100 > > > > [ 37.044111] [] default_idle+0x0/0x40 > > > > [ 37.044115] [] ret_from_intr+0x0/0xa > > > > [ 37.044117][] default_idle+0x29/0x40 > > > > [ 37.044130] [] cpu_idle+0x75/0xc0 > > > > [ 37.044146] > > > > > Can you check if that is the > WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3); > in rx.c line 1486? How can I check? The source code I build does indeed have the line you quoted on net/mac80211/rx.c:1486 Is that what you are asking for? WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3); > If that is the one, then fixes are already on their way upstream. > Ignore the harmless warning for now. Thanks for your time > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: Linux 2.6.24-rc7
El Mon, 7 Jan 2008 17:24:03 +0100 Michael Buesch <[EMAIL PROTECTED]> escribió: > > Can you post the lines above this? > This might be a WARN_ON_ONCE() triggering, for which fixes are on their way > into > the wireless-2.6 tree. This? [ 37.043990] WARNING: at /home/alex/kernel/linux-2.6/net/mac80211/rx.c:1486 __ieee80211_rx() [ 37.043996] Pid: 0, comm: swapper Not tainted 2.6.24-rc7 #3 [ 37.043998] [ 37.043999] Call Trace: [ 37.044001][] enqueue_task+0x13/0x30 [ 37.044040] [] :mac80211:__ieee80211_rx+0xc7e/0xd30 [ 37.044044] [] activate_task+0x32/0x50 [ 37.044073] [] :mac80211:ieee80211_tasklet_handler+0xbb/0x120 [ 37.044086] [] tasklet_action+0x48/0xb0 [ 37.044091] [] __do_softirq+0x69/0xe0 [ 37.044097] [] call_softirq+0x1c/0x30 [ 37.044101] [] do_softirq+0x35/0x90 [ 37.044105] [] irq_exit+0x95/0xa0 [ 37.044108] [] do_IRQ+0x80/0x100 [ 37.044111] [] default_idle+0x0/0x40 [ 37.044115] [] ret_from_intr+0x0/0xa [ 37.044117][] default_idle+0x29/0x40 [ 37.044130] [] cpu_idle+0x75/0xc0 [ 37.044146] > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: Linux 2.6.24-rc7
El Sun, 6 Jan 2008 14:19:16 -0800 (PST) Linus Torvalds <[EMAIL PROTECTED]> escribió: > > It's been two weeks since rc6, but let's face it, with xmas and new years > (and birthdays) in between, there hasn't actually been a lot of working > days, and the incremental patch from -rc6 is about half the size of the > one from rc5->rc6. > > And I'll be charitable and claim it's because it's all stabilizing, and > not because we've all been in a drunken stupor over the holidays. > > The shortlog (appended below) is short and fairly informative. It's all > really just a lot of rather small changes. The diffstat shows a lot of > one- and two-liners, with just a few drivers (and the Cell platform) > getting a bit more attention, and the SLUB support of /proc/slabinfo > showing up as a blip. > > Both git trees and tar-balls/patches pushed out, should be mirroring out > within minutes. So there are no excuses to not try it out, and see if your > favorite regression has been fixed. > > Linus > Booted with it and I see [ 37.043998] [ 37.043999] Call Trace: [ 37.044001][] enqueue_task+0x13/0x30 [ 37.044040] [] :mac80211:__ieee80211_rx+0xc7e/0xd30 [ 37.044044] [] activate_task+0x32/0x50 [ 37.044073] [] :mac80211:ieee80211_tasklet_handler+0xbb/0x120 [ 37.044086] [] tasklet_action+0x48/0xb0 [ 37.044091] [] __do_softirq+0x69/0xe0 [ 37.044097] [] call_softirq+0x1c/0x30 [ 37.044101] [] do_softirq+0x35/0x90 [ 37.044105] [] irq_exit+0x95/0xa0 [ 37.044108] [] do_IRQ+0x80/0x100 [ 37.044111] [] default_idle+0x0/0x40 [ 37.044115] [] ret_from_intr+0x0/0xa [ 37.044117][] default_idle+0x29/0x40 [ 37.044130] [] cpu_idle+0x75/0xc0 [ 37.044146] If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux Varda 2.6.24-rc7 #3 SMP PREEMPT Mon Jan 7 14:47:13 CET 2008 x86_64 GNU/Linux Gnu C 4.1.3 Gnu make 3.81 binutils 2.18 util-linux 2.13 mount 2.13 module-init-tools 3.3-pre2 e2fsprogs 1.40.2 jfsutils 1.1.11 reiserfsprogs 3.6.19 pcmciautils014 PPP2.4.4 Linux C Library2.6.1 Dynamic linker (ldd) 2.6.1 Procps 3.2.7 Net-tools 1.60 Kbd[opcion...][archivo Console-tools 0.2.3 Sh-utils 5.97 udev 113 wireless-tools 29 Modules Loaded af_packet binfmt_misc rfcomm l2cap bluetooth ipv6 powernow_k8 cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand freq_table cpufreq_conservative nf_conntrack_ftp nf_conntrack_irc xt_tcpudp ipt_ULOG xt_limit xt_state iptable_filter nf_conntrack_ipv4 nf_conntrack ip_tables x_tables kvm_amd kvm w83627ehf hwmon_vid lp arc4 ecb blkcipher cryptomgr snd_hda_intel crypto_algapi snd_pcm_oss snd_mixer_oss snd_pcm rt2500pci rt2x00pci rt2x00lib snd_seq_dummy rfkill snd_mpu401 input_polldev snd_seq_oss snd_mpu401_uart crc_itu_t snd_seq_midi snd_seq_midi_event mac80211 8250_pnp snd_rawmidi snd_seq parport_pc parport 8250 serial_core usbhid cfg80211 snd_timer snd_seq_device rtc evdev pcspkr ff_memless k8temp hwmon usblp snd eeprom_93cx6 i2c_ali1535 i2c_ali15x3 soundcore i2c_core snd_page_alloc button uli526x floppy sr_mod cdrom sg ehci_hcd ohci_hcd pata_acpi ata_generic r8169 usbcore unix thermal processor fan fuse # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24-rc6 # Sun Jan 6 17:11:46 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y
Re: Linux 2.6.24-rc7
El Sun, 6 Jan 2008 14:19:16 -0800 (PST) Linus Torvalds <[EMAIL PROTECTED]> escribió: > > It's been two weeks since rc6, but let's face it, with xmas and new years > (and birthdays) in between, there hasn't actually been a lot of working > days, and the incremental patch from -rc6 is about half the size of the > one from rc5->rc6. > > And I'll be charitable and claim it's because it's all stabilizing, and > not because we've all been in a drunken stupor over the holidays. > > The shortlog (appended below) is short and fairly informative. It's all > really just a lot of rather small changes. The diffstat shows a lot of > one- and two-liners, with just a few drivers (and the Cell platform) > getting a bit more attention, and the SLUB support of /proc/slabinfo > showing up as a blip. > > Both git trees and tar-balls/patches pushed out, should be mirroring out > within minutes. So there are no excuses to not try it out, and see if your > favorite regression has been fixed. > > Linus > MODPOST vmlinux.o WARNING: vmlinux.o(.text+0x10508): Section mismatch: reference to .init.text:fork_idle (between 'do_fork_idle' and 'lapic_timer_broadcast') WARNING: vmlinux.o(.text.head+0xe4): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64') WARNING: vmlinux.o(.text.head+0xeb): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64') Config: # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24-rc6 # Sun Jan 6 17:11:46 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_ZONE_DMA=y # CONFIG_QUICKLIST is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CGROUPS is not set CONFIG_FAIR_GROUP_SCHED=y CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=m CONFIG_IOSCHED_CFQ=m CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_PREEMPT_NOTIFIERS=y # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_X86_VSMP is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set #
Re: Linux 2.6.24-rc7
El Sun, 6 Jan 2008 14:19:16 -0800 (PST) Linus Torvalds [EMAIL PROTECTED] escribió: It's been two weeks since rc6, but let's face it, with xmas and new years (and birthdays) in between, there hasn't actually been a lot of working days, and the incremental patch from -rc6 is about half the size of the one from rc5-rc6. And I'll be charitable and claim it's because it's all stabilizing, and not because we've all been in a drunken stupor over the holidays. The shortlog (appended below) is short and fairly informative. It's all really just a lot of rather small changes. The diffstat shows a lot of one- and two-liners, with just a few drivers (and the Cell platform) getting a bit more attention, and the SLUB support of /proc/slabinfo showing up as a blip. Both git trees and tar-balls/patches pushed out, should be mirroring out within minutes. So there are no excuses to not try it out, and see if your favorite regression has been fixed. Linus MODPOST vmlinux.o WARNING: vmlinux.o(.text+0x10508): Section mismatch: reference to .init.text:fork_idle (between 'do_fork_idle' and 'lapic_timer_broadcast') WARNING: vmlinux.o(.text.head+0xe4): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64') WARNING: vmlinux.o(.text.head+0xeb): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64') Config: # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24-rc6 # Sun Jan 6 17:11:46 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_ZONE_DMA=y # CONFIG_QUICKLIST is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST=/lib/modules/$UNAME_RELEASE/.config # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION= CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CGROUPS is not set CONFIG_FAIR_GROUP_SCHED=y CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE= # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=m CONFIG_IOSCHED_CFQ=m CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED=anticipatory CONFIG_PREEMPT_NOTIFIERS=y # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_X86_VSMP is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686
Re: Linux 2.6.24-rc7
El Sun, 6 Jan 2008 14:19:16 -0800 (PST) Linus Torvalds [EMAIL PROTECTED] escribió: It's been two weeks since rc6, but let's face it, with xmas and new years (and birthdays) in between, there hasn't actually been a lot of working days, and the incremental patch from -rc6 is about half the size of the one from rc5-rc6. And I'll be charitable and claim it's because it's all stabilizing, and not because we've all been in a drunken stupor over the holidays. The shortlog (appended below) is short and fairly informative. It's all really just a lot of rather small changes. The diffstat shows a lot of one- and two-liners, with just a few drivers (and the Cell platform) getting a bit more attention, and the SLUB support of /proc/slabinfo showing up as a blip. Both git trees and tar-balls/patches pushed out, should be mirroring out within minutes. So there are no excuses to not try it out, and see if your favorite regression has been fixed. Linus Booted with it and I see [ 37.043998] [ 37.043999] Call Trace: [ 37.044001] IRQ [80227fe3] enqueue_task+0x13/0x30 [ 37.044040] [88178cbe] :mac80211:__ieee80211_rx+0xc7e/0xd30 [ 37.044044] [80228062] activate_task+0x32/0x50 [ 37.044073] [8816a28b] :mac80211:ieee80211_tasklet_handler+0xbb/0x120 [ 37.044086] [80238d08] tasklet_action+0x48/0xb0 [ 37.044091] [80238c09] __do_softirq+0x69/0xe0 [ 37.044097] [8020ce2c] call_softirq+0x1c/0x30 [ 37.044101] [8020efe5] do_softirq+0x35/0x90 [ 37.044105] [80238aa5] irq_exit+0x95/0xa0 [ 37.044108] [8020f0c0] do_IRQ+0x80/0x100 [ 37.044111] [8020a840] default_idle+0x0/0x40 [ 37.044115] [8020c181] ret_from_intr+0x0/0xa [ 37.044117] EOI [8020a869] default_idle+0x29/0x40 [ 37.044130] [8020a8f5] cpu_idle+0x75/0xc0 [ 37.044146] If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux Varda 2.6.24-rc7 #3 SMP PREEMPT Mon Jan 7 14:47:13 CET 2008 x86_64 GNU/Linux Gnu C 4.1.3 Gnu make 3.81 binutils 2.18 util-linux 2.13 mount 2.13 module-init-tools 3.3-pre2 e2fsprogs 1.40.2 jfsutils 1.1.11 reiserfsprogs 3.6.19 pcmciautils014 PPP2.4.4 Linux C Library2.6.1 Dynamic linker (ldd) 2.6.1 Procps 3.2.7 Net-tools 1.60 Kbd[opcion...][archivo Console-tools 0.2.3 Sh-utils 5.97 udev 113 wireless-tools 29 Modules Loaded af_packet binfmt_misc rfcomm l2cap bluetooth ipv6 powernow_k8 cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand freq_table cpufreq_conservative nf_conntrack_ftp nf_conntrack_irc xt_tcpudp ipt_ULOG xt_limit xt_state iptable_filter nf_conntrack_ipv4 nf_conntrack ip_tables x_tables kvm_amd kvm w83627ehf hwmon_vid lp arc4 ecb blkcipher cryptomgr snd_hda_intel crypto_algapi snd_pcm_oss snd_mixer_oss snd_pcm rt2500pci rt2x00pci rt2x00lib snd_seq_dummy rfkill snd_mpu401 input_polldev snd_seq_oss snd_mpu401_uart crc_itu_t snd_seq_midi snd_seq_midi_event mac80211 8250_pnp snd_rawmidi snd_seq parport_pc parport 8250 serial_core usbhid cfg80211 snd_timer snd_seq_device rtc evdev pcspkr ff_memless k8temp hwmon usblp snd eeprom_93cx6 i2c_ali1535 i2c_ali15x3 soundcore i2c_core snd_page_alloc button uli526x floppy sr_mod cdrom sg ehci_hcd ohci_hcd pata_acpi ata_generic r8169 usbcore unix thermal processor fan fuse # # Automatically generated make config: don't edit
Re: Linux 2.6.24-rc7
El Mon, 7 Jan 2008 17:24:03 +0100 Michael Buesch [EMAIL PROTECTED] escribió: Can you post the lines above this? This might be a WARN_ON_ONCE() triggering, for which fixes are on their way into the wireless-2.6 tree. This? [ 37.043990] WARNING: at /home/alex/kernel/linux-2.6/net/mac80211/rx.c:1486 __ieee80211_rx() [ 37.043996] Pid: 0, comm: swapper Not tainted 2.6.24-rc7 #3 [ 37.043998] [ 37.043999] Call Trace: [ 37.044001] IRQ [80227fe3] enqueue_task+0x13/0x30 [ 37.044040] [88178cbe] :mac80211:__ieee80211_rx+0xc7e/0xd30 [ 37.044044] [80228062] activate_task+0x32/0x50 [ 37.044073] [8816a28b] :mac80211:ieee80211_tasklet_handler+0xbb/0x120 [ 37.044086] [80238d08] tasklet_action+0x48/0xb0 [ 37.044091] [80238c09] __do_softirq+0x69/0xe0 [ 37.044097] [8020ce2c] call_softirq+0x1c/0x30 [ 37.044101] [8020efe5] do_softirq+0x35/0x90 [ 37.044105] [80238aa5] irq_exit+0x95/0xa0 [ 37.044108] [8020f0c0] do_IRQ+0x80/0x100 [ 37.044111] [8020a840] default_idle+0x0/0x40 [ 37.044115] [8020c181] ret_from_intr+0x0/0xa [ 37.044117] EOI [8020a869] default_idle+0x29/0x40 [ 37.044130] [8020a8f5] cpu_idle+0x75/0xc0 [ 37.044146] -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: Linux 2.6.24-rc7
El Mon, 7 Jan 2008 18:30:51 +0100 Michael Buesch [EMAIL PROTECTED] escribió: On Monday 07 January 2008 17:52:48 Alejandro Riveira Fernández wrote: El Mon, 7 Jan 2008 17:24:03 +0100 Michael Buesch [EMAIL PROTECTED] escribió: Can you post the lines above this? This might be a WARN_ON_ONCE() triggering, for which fixes are on their way into the wireless-2.6 tree. This? [ 37.043990] WARNING: at /home/alex/kernel/linux-2.6/net/mac80211/rx.c:1486 __ieee80211_rx() [ 37.043996] Pid: 0, comm: swapper Not tainted 2.6.24-rc7 #3 [ 37.043998] [ 37.043999] Call Trace: [ 37.044001] IRQ [80227fe3] enqueue_task+0x13/0x30 [ 37.044040] [88178cbe] :mac80211:__ieee80211_rx+0xc7e/0xd30 [ 37.044044] [80228062] activate_task+0x32/0x50 [ 37.044073] [8816a28b] :mac80211:ieee80211_tasklet_handler+0xbb/0x120 [ 37.044086] [80238d08] tasklet_action+0x48/0xb0 [ 37.044091] [80238c09] __do_softirq+0x69/0xe0 [ 37.044097] [8020ce2c] call_softirq+0x1c/0x30 [ 37.044101] [8020efe5] do_softirq+0x35/0x90 [ 37.044105] [80238aa5] irq_exit+0x95/0xa0 [ 37.044108] [8020f0c0] do_IRQ+0x80/0x100 [ 37.044111] [8020a840] default_idle+0x0/0x40 [ 37.044115] [8020c181] ret_from_intr+0x0/0xa [ 37.044117] EOI [8020a869] default_idle+0x29/0x40 [ 37.044130] [8020a8f5] cpu_idle+0x75/0xc0 [ 37.044146] Can you check if that is the WARN_ON_ONCE(((unsigned long)(skb-data + hdrlen)) 3); in rx.c line 1486? How can I check? The source code I build does indeed have the line you quoted on net/mac80211/rx.c:1486 Is that what you are asking for? WARN_ON_ONCE(((unsigned long)(skb-data + hdrlen)) 3); If that is the one, then fixes are already on their way upstream. Ignore the harmless warning for now. Thanks for your time -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Section mismatch reference to: .... in latest git
I'm getting this on latest git (v2.6.24-rc6-174-gdc51281) WARNING: vmlinux.o(.text+0x104f8): Section mismatch: reference to .init.text:fork_idle (between 'do_fork_idle' and 'lapic_timer_broadcast') WARNING: vmlinux.o(.text.head+0xe4): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64') WARNING: vmlinux.o(.text.head+0xeb): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64') If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux Varda 2.6.24-rc6-g5b825ed2 #4 SMP PREEMPT Sat Dec 22 10:36:34 CET 2007 x86_64 GNU/Linux Gnu C 4.1.3 Gnu make 3.81 binutils 2.18 util-linux 2.13 mount 2.13 module-init-tools 3.3-pre2 e2fsprogs 1.40.2 jfsutils 1.1.11 reiserfsprogs 3.6.19 pcmciautils014 PPP2.4.4 Linux C Library2.6.1 Dynamic linker (ldd) 2.6.1 Procps 3.2.7 Net-tools 1.60 Kbd[opcion...][archivo Console-tools 0.2.3 Sh-utils 5.97 udev 113 wireless-tools 29 Modules Loaded af_packet binfmt_misc rfcomm l2cap bluetooth ipv6 powernow_k8 cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand freq_table cpufreq_conservative nf_conntrack_ftp nf_conntrack_irc xt_tcpudp ipt_ULOG xt_limit xt_state iptable_filter nf_conntrack_ipv4 nf_conntrack ip_tables x_tables kvm_amd kvm w83627ehf hwmon_vid lp snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm arc4 ecb blkcipher cryptomgr crypto_algapi snd_mpu401 snd_mpu401_uart snd_seq_dummy snd_seq_oss rt2500pci rt2x00pci rt2x00lib snd_seq_midi rfkill snd_rawmidi snd_seq_midi_event input_polldev crc_itu_t snd_seq mac80211 snd_timer usbhid snd_seq_device cfg80211 ff_memless snd i2c_ali1535 i2c_ali15x3 nvidia sr_mod usblp cdrom evdev k8temp eeprom_93cx6 soundcore snd_page_alloc button pata_acpi 8250_pnp 8250 serial_core i2c_core hwmon uli526x parport_pc parport pcspkr rtc floppy sg r8169 ata_generic ehci_hcd ohci_hcd usbcore unix thermal processor fan fuse Config Follows # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24-rc6 # Wed Dec 26 23:27:59 2007 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_ZONE_DMA=y # CONFIG_QUICKLIST is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CGROUPS is not set CONFIG_FAIR_GROUP_SCHED=y CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y
Section mismatch reference to: .... in latest git
I'm getting this on latest git (v2.6.24-rc6-174-gdc51281) WARNING: vmlinux.o(.text+0x104f8): Section mismatch: reference to .init.text:fork_idle (between 'do_fork_idle' and 'lapic_timer_broadcast') WARNING: vmlinux.o(.text.head+0xe4): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64') WARNING: vmlinux.o(.text.head+0xeb): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64') If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux Varda 2.6.24-rc6-g5b825ed2 #4 SMP PREEMPT Sat Dec 22 10:36:34 CET 2007 x86_64 GNU/Linux Gnu C 4.1.3 Gnu make 3.81 binutils 2.18 util-linux 2.13 mount 2.13 module-init-tools 3.3-pre2 e2fsprogs 1.40.2 jfsutils 1.1.11 reiserfsprogs 3.6.19 pcmciautils014 PPP2.4.4 Linux C Library2.6.1 Dynamic linker (ldd) 2.6.1 Procps 3.2.7 Net-tools 1.60 Kbd[opcion...][archivo Console-tools 0.2.3 Sh-utils 5.97 udev 113 wireless-tools 29 Modules Loaded af_packet binfmt_misc rfcomm l2cap bluetooth ipv6 powernow_k8 cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand freq_table cpufreq_conservative nf_conntrack_ftp nf_conntrack_irc xt_tcpudp ipt_ULOG xt_limit xt_state iptable_filter nf_conntrack_ipv4 nf_conntrack ip_tables x_tables kvm_amd kvm w83627ehf hwmon_vid lp snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm arc4 ecb blkcipher cryptomgr crypto_algapi snd_mpu401 snd_mpu401_uart snd_seq_dummy snd_seq_oss rt2500pci rt2x00pci rt2x00lib snd_seq_midi rfkill snd_rawmidi snd_seq_midi_event input_polldev crc_itu_t snd_seq mac80211 snd_timer usbhid snd_seq_device cfg80211 ff_memless snd i2c_ali1535 i2c_ali15x3 nvidia sr_mod usblp cdrom evdev k8temp eeprom_93cx6 soundcore snd_page_alloc button pata_acpi 8250_pnp 8250 serial_core i2c_core hwmon uli526x parport_pc parport pcspkr rtc floppy sg r8169 ata_generic ehci_hcd ohci_hcd usbcore unix thermal processor fan fuse Config Follows # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24-rc6 # Wed Dec 26 23:27:59 2007 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_ZONE_DMA=y # CONFIG_QUICKLIST is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST=/lib/modules/$UNAME_RELEASE/.config # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION= CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CGROUPS is not set CONFIG_FAIR_GROUP_SCHED=y CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE= # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y
Re: rt2x00 is sapmming my logs
El Sun, 23 Dec 2007 00:04:42 +0100 "Rafael J. Wysocki" <[EMAIL PROTECTED]> escribió: > On Saturday, 22 of December 2007, Alejandro Riveira Fernández wrote: > > > I have created a bugzilla entry for this problem at: > http://bugzilla.kernel.org/show_bug.cgi?id=9622 > and added it to the list of reported regressions. Thanks! > > Thanks, > Rafael > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
rt2x00 is sapmming my logs
I have a rt2500pci card on an 64 bit system (Ubuntu) AMD X2 processor and i'm trying latest vanilla kernels i've used a 2.6.24-rc5 kernel without mayor issues (except that i have to issue a sudo iwconfig wlan0 rate 54M because it allways connect at 1Mbit and it is dog slow) but now with v2.6.24-rc6-83-g5b825ed i have my dmesg spammed with: [ 1122.323489] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.323491] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.326139] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.326142] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.327508] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.327511] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.329405] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.329409] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.332519] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.332522] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.33] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.334447] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.336847] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.336850] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.338654] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.338657] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.340844] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.340847] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.343035] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.343038] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.344301] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.344303] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.347146] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.347148] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.349381] phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. The connection seems top work anyways so i do not think this is critical. Thanks in advance for your time. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
rt2x00 is sapmming my logs
I have a rt2500pci card on an 64 bit system (Ubuntu) AMD X2 processor and i'm trying latest vanilla kernels i've used a 2.6.24-rc5 kernel without mayor issues (except that i have to issue a sudo iwconfig wlan0 rate 54M because it allways connect at 1Mbit and it is dog slow) but now with v2.6.24-rc6-83-g5b825ed i have my dmesg spammed with: [ 1122.323489] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.323491] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.326139] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.326142] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.327508] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.327511] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.329405] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.329409] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.332519] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.332522] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.33] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.334447] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.336847] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.336850] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.338654] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.338657] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.340844] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.340847] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.343035] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.343038] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.344301] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.344303] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.347146] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. [ 1122.347148] Please file bug report to http://rt2x00.serialmonkey.com. [ 1122.349381] phy0 - rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 0. The connection seems top work anyways so i do not think this is critical. Thanks in advance for your time. -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: rt2x00 is sapmming my logs
El Sun, 23 Dec 2007 00:04:42 +0100 Rafael J. Wysocki [EMAIL PROTECTED] escribió: On Saturday, 22 of December 2007, Alejandro Riveira Fernández wrote: I have created a bugzilla entry for this problem at: http://bugzilla.kernel.org/show_bug.cgi?id=9622 and added it to the list of reported regressions. Thanks! Thanks, Rafael -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [RFT] Port 0x80 I/O speed
El Wed, 12 Dec 2007 01:16:06 +0100 Rene Herman <[EMAIL PROTECTED]> escribió: > On 12-12-07 01:09, Alejandro Riveira Fernández wrote: [...] > > Great, thanks much for reporting. Sort of interesting in itself that without > -O2 you do still get correct results on 64-bit but for some other time. > > You're the first one to go significantly below 1 us it seems. :( I have seen the other msg and i have to say that the tests where done at 1GHz not at full speed. At full speed i see cycles: out 3025, in 1653 cycles: out 3040, in 1708 cycles: out 3044, in 1650 cycles: out 3034, in 1652 cycles: out 3035, in 1652 cycles: out 3037, in 1652 cycles: out 3043, in 1709 cycles: out 3032, in 1648 cycles: out 3039, in 1652 cycles: out 3041, in 1652 cycles: out 3048, in 1704 cycles: out 3040, in 1650 cycles: out 3023, in 1631 cycles: out 3036, in 1652 cycles: out 3042, in 1706 cycles: out 3047, in 1708 cycles: out 3047, in 1711 cycles: out 3036, in 1652 > > Rene. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [RFT] Port 0x80 I/O speed
El Wed, 12 Dec 2007 01:16:06 +0100 Rene Herman [EMAIL PROTECTED] escribió: On 12-12-07 01:09, Alejandro Riveira Fernández wrote: [...] Great, thanks much for reporting. Sort of interesting in itself that without -O2 you do still get correct results on 64-bit but for some other time. You're the first one to go significantly below 1 us it seems. :( I have seen the other msg and i have to say that the tests where done at 1GHz not at full speed. At full speed i see cycles: out 3025, in 1653 cycles: out 3040, in 1708 cycles: out 3044, in 1650 cycles: out 3034, in 1652 cycles: out 3035, in 1652 cycles: out 3037, in 1652 cycles: out 3043, in 1709 cycles: out 3032, in 1648 cycles: out 3039, in 1652 cycles: out 3041, in 1652 cycles: out 3048, in 1704 cycles: out 3040, in 1650 cycles: out 3023, in 1631 cycles: out 3036, in 1652 cycles: out 3042, in 1706 cycles: out 3047, in 1708 cycles: out 3047, in 1711 cycles: out 3036, in 1652 Rene. -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [RFT] Port 0x80 I/O speed
El Wed, 12 Dec 2007 00:51:25 +0100 Rene Herman <[EMAIL PROTECTED]> escribió: > On 12-12-07 00:43, Alejandro Riveira Fernández wrote: > > > On my AMD 3800 X2 (2000MHz) ULi M1697 2.6.24-rc5 i get: > > > > cycles: out 1844674407370808, in 1844674407369087 > > > > It is not constant but variations are not significant afaics > > Eh, oh, I guess you need to compile as a 32-bit binary... I tried without -O2 as Nigel Cunningham... cycles: out 1562, in 865 cycles: out 1562, in 866 cycles: out 1555, in 858 cycles: out 1562, in 866 With -m32 -O2 cycles: out 1566, in 876 cycles: out 1555, in 865 cycles: out 1594, in 931 cycles: out 1559, in 874 ... > > Rene. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [RFT] Port 0x80 I/O speed
El Wed, 12 Dec 2007 00:31:18 +0100 Rene Herman <[EMAIL PROTECTED]> escribió: > Good day. > > Would some people on x86 (both 32 and 64) be kind enough to compile and run > the attached program? This is about testing how long I/O port access to port > 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting. > > Posted a previous incarnation of this before, buried in the outb 0x80 thread > which had a serialising problem. This one should as far as I can see measure > the right thing though. Please yell if you disagree... > > For me, on a Duron 1300 (AMD756 chipset) I have a constant: > > [EMAIL PROTECTED]:~/src/port80$ su -c ./port80 > cycles: out 2400, in 2400 > > and on a PII 400 (Intel 440BX chipset) a constant: > > [EMAIL PROTECTED]:~/src/port80$ su -c ./port80 > cycles: out 553, in 251 > > Results are (mostly) independent of compiler optimisation, but testing with > an -O2 compile should be most useful. Thanks! > > Rene. On my AMD 3800 X2 (2000MHz) ULi M1697 2.6.24-rc5 i get: cycles: out 1844674407370808, in 1844674407369087 It is not constant but variations are not significant afaics -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [RFT] Port 0x80 I/O speed
El Wed, 12 Dec 2007 00:31:18 +0100 Rene Herman [EMAIL PROTECTED] escribió: Good day. Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting. Posted a previous incarnation of this before, buried in the outb 0x80 thread which had a serialising problem. This one should as far as I can see measure the right thing though. Please yell if you disagree... For me, on a Duron 1300 (AMD756 chipset) I have a constant: [EMAIL PROTECTED]:~/src/port80$ su -c ./port80 cycles: out 2400, in 2400 and on a PII 400 (Intel 440BX chipset) a constant: [EMAIL PROTECTED]:~/src/port80$ su -c ./port80 cycles: out 553, in 251 Results are (mostly) independent of compiler optimisation, but testing with an -O2 compile should be most useful. Thanks! Rene. On my AMD 3800 X2 (2000MHz) ULi M1697 2.6.24-rc5 i get: cycles: out 1844674407370808, in 1844674407369087 It is not constant but variations are not significant afaics -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [RFT] Port 0x80 I/O speed
El Wed, 12 Dec 2007 00:51:25 +0100 Rene Herman [EMAIL PROTECTED] escribió: On 12-12-07 00:43, Alejandro Riveira Fernández wrote: On my AMD 3800 X2 (2000MHz) ULi M1697 2.6.24-rc5 i get: cycles: out 1844674407370808, in 1844674407369087 It is not constant but variations are not significant afaics Eh, oh, I guess you need to compile as a 32-bit binary... I tried without -O2 as Nigel Cunningham... cycles: out 1562, in 865 cycles: out 1562, in 866 cycles: out 1555, in 858 cycles: out 1562, in 866 With -m32 -O2 cycles: out 1566, in 876 cycles: out 1555, in 865 cycles: out 1594, in 931 cycles: out 1559, in 874 ... Rene. -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [patch/backport] CFS scheduler, -v22, for v2.6.23-rc8, v2.6.22.8, v2.6.21.7, v2.6.20.20
El Sun, 30 Sep 2007 17:26:22 +0200 Ingo Molnar <[EMAIL PROTECTED]> escribió: > > > hm. There are no similar reports so far. Could you try to run the wine > program from a VGA text console (first do 'xhost +' in an xterm under X > and then 'export DISPLAY=:0' in the text console) and see whether > anything gets output to that console? Also enable nmi_watchdog=2 - which > could print a backtrace of the point of the hard lockup. Ignore the last mail there was no need to use pictures this no an oops on boot ;) This is the back trace Oct 2 17:37:13 localhost kernel: [ 886.216868] BUG: unable to handle kernel NULL pointer dereference at virtual address 012c Oct 2 17:37:13 localhost kernel: [ 886.216874] printing eip: Oct 2 17:37:13 localhost kernel: [ 886.216876] f9374d0c Oct 2 17:37:13 localhost kernel: [ 886.216877] *pde = Oct 2 17:37:13 localhost kernel: [ 886.216880] Oops: 0002 [#1] Oct 2 17:37:13 localhost kernel: [ 886.216881] PREEMPT SMP Oct 2 17:37:13 localhost kernel: [ 886.216884] Modules linked in: nls_cp850 isofs udf nls_utf8 ntfs binfmt_misc rfcomm l2cap bluetooth ipt_ULOG x_tables jfs ipv6 dm_crypt af_packet kvm_amd kvm fuse w83627ehf hwmon_vid i2c_dev lp snd_mpu401 snd_mpu401_uart snd_hda_intel snd_pcm_oss snd_mixer_oss snd_seq_dummy snd_pcm snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer nvidia(P) snd_seq_device usbhid i2c_ali15x3 i2c_ali1535 8250_pnp usblp ff_memless uli526x snd i2c_core 8250 serial_core button ali_agp parport_pc parport k8temp hwmon pcspkr evdev rtc snd_page_alloc rt2500 soundcore sg floppy sr_mod raid10 cdrom sd_mod ehci_hcd ohci_hcd ata_generic usbcore raid456 async_xor async_memcpy async_tx xor raid1 raid0 multipath linear md_mod thermal processor fan unix dm_mod Oct 2 17:37:13 localhost kernel: [ 886.216933] CPU:0 Oct 2 17:37:13 localhost kernel: [ 886.216934] EIP:0060:[] Tainted: PVLI Oct 2 17:37:13 localhost kernel: [ 886.216935] EFLAGS: 00010246 (2.6.23-rc9-cfs-v22-dirty #82) Oct 2 17:37:13 localhost kernel: [ 886.217129] EIP is at os_set_mlock_capability+0xc/0x30 [nvidia] Oct 2 17:37:13 localhost kernel: [ 886.217131] eax: ebx: ecx: 0050 edx: 0202 Oct 2 17:37:13 localhost kernel: [ 886.217134] esi: f74c3000 edi: f749cc00 ebp: df4b3ff0 esp: d319bed4 Oct 2 17:37:13 localhost kernel: [ 886.217136] ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 Oct 2 17:37:13 localhost kernel: [ 886.217139] Process spirographx (pid: 5512, ti=d319b000 task=c45da540 task.ti=d319b000) Oct 2 17:37:13 localhost kernel: [ 886.217141] Stack: f909cd35 f909ed92 f9655740 e1d42c00 f6ca5bc0 f90a0c26 df4b2000 005b Oct 2 17:37:13 localhost kernel: [ 886.217146]000c f909da32 f9655740 e1d42c00 005b f6ca5bc0 f6ca5bc0 005b Oct 2 17:37:13 localhost kernel: [ 886.217151]f9655740 f9370e98 df4b2000 f9655740 e1d42c00 005b f6ca5bc0 Oct 2 17:37:13 localhost kernel: [ 886.217157] Call Trace: Oct 2 17:37:13 localhost kernel: [ 886.217164] [] _nv002553rm+0x5/0x10 [nvidia] Oct 2 17:37:13 localhost kernel: [ 886.217259] [] rm_write_watch_init+0x3b/0x54 [nvidia] Oct 2 17:37:13 localhost kernel: [ 886.217365] [] _nv002642rm+0x416/0x5e9 [nvidia] Oct 2 17:37:13 localhost kernel: [ 886.217469] [] rm_ioctl+0x3e/0x6d [nvidia] Oct 2 17:37:13 localhost kernel: [ 886.217578] [] nv_kern_ioctl+0xf8/0x3c0 [nvidia] Oct 2 17:37:13 localhost kernel: [ 886.217732] [] nv_kern_unlocked_ioctl+0x18/0x20 [nvidia] Oct 2 17:37:13 localhost kernel: [ 886.217866] [] nv_kern_unlocked_ioctl+0x0/0x20 [nvidia] Oct 2 17:37:13 localhost kernel: [ 886.217989] [do_ioctl+43/144] do_ioctl+0x2b/0x90 Oct 2 17:37:13 localhost kernel: [ 886.217994] [remove_vma+57/80] remove_vma+0x39/0x50 Oct 2 17:37:13 localhost kernel: [ 886.218010] [vfs_ioctl+92/656] vfs_ioctl+0x5c/0x290 Oct 2 17:37:13 localhost kernel: [ 886.218022] [sys_ioctl+114/144] sys_ioctl+0x72/0x90 Oct 2 17:37:13 localhost kernel: [ 886.218032] [sysenter_past_esp+95/133] sysenter_past_esp+0x5f/0x85 Oct 2 17:37:13 localhost kernel: [ 886.218060] === Oct 2 17:37:13 localhost kernel: [ 886.218061] Code: bb 86 da c6 31 c0 c3 90 8d b4 26 00 00 00 00 64 a1 00 f0 3e c0 8b 80 dc 00 00 00 c3 8d 76 00 64 a1 00 f0 3e c0 8b 80 8c 04 00 00 80 2c 01 00 00 ff ff ff ff 64 a1 00 f0 3e c0 81 88 ac 01 00 Oct 2 17:37:13 localhost kernel: [ 886.218083] EIP: [] os_set_mlock_capability+0xc/0x30 [nvidia] SS:ESP 0068:d319bed4 > > but in general there's nothing scheduler-specific about screensavers or > wine - but it could be related to 3D mode of the chip (hence related to > the nvidia module) - do you get a similar lockup if you try to run > 'glxgears'? In fact the backtrace was obtained trying to run glxgears > > Ingo Alejandro -- Nunca discutas con un idiota. Al final te hacen rebajarte a su nivel y
Re: [patch/backport] CFS scheduler, -v22, for v2.6.23-rc8, v2.6.22.8, v2.6.21.7, v2.6.20.20
El Sun, 30 Sep 2007 17:26:22 +0200 Ingo Molnar [EMAIL PROTECTED] escribió: hm. There are no similar reports so far. Could you try to run the wine program from a VGA text console (first do 'xhost +' in an xterm under X and then 'export DISPLAY=:0' in the text console) and see whether anything gets output to that console? Also enable nmi_watchdog=2 - which could print a backtrace of the point of the hard lockup. Ignore the last mail there was no need to use pictures this no an oops on boot ;) This is the back trace Oct 2 17:37:13 localhost kernel: [ 886.216868] BUG: unable to handle kernel NULL pointer dereference at virtual address 012c Oct 2 17:37:13 localhost kernel: [ 886.216874] printing eip: Oct 2 17:37:13 localhost kernel: [ 886.216876] f9374d0c Oct 2 17:37:13 localhost kernel: [ 886.216877] *pde = Oct 2 17:37:13 localhost kernel: [ 886.216880] Oops: 0002 [#1] Oct 2 17:37:13 localhost kernel: [ 886.216881] PREEMPT SMP Oct 2 17:37:13 localhost kernel: [ 886.216884] Modules linked in: nls_cp850 isofs udf nls_utf8 ntfs binfmt_misc rfcomm l2cap bluetooth ipt_ULOG x_tables jfs ipv6 dm_crypt af_packet kvm_amd kvm fuse w83627ehf hwmon_vid i2c_dev lp snd_mpu401 snd_mpu401_uart snd_hda_intel snd_pcm_oss snd_mixer_oss snd_seq_dummy snd_pcm snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer nvidia(P) snd_seq_device usbhid i2c_ali15x3 i2c_ali1535 8250_pnp usblp ff_memless uli526x snd i2c_core 8250 serial_core button ali_agp parport_pc parport k8temp hwmon pcspkr evdev rtc snd_page_alloc rt2500 soundcore sg floppy sr_mod raid10 cdrom sd_mod ehci_hcd ohci_hcd ata_generic usbcore raid456 async_xor async_memcpy async_tx xor raid1 raid0 multipath linear md_mod thermal processor fan unix dm_mod Oct 2 17:37:13 localhost kernel: [ 886.216933] CPU:0 Oct 2 17:37:13 localhost kernel: [ 886.216934] EIP:0060:[f9374d0c] Tainted: PVLI Oct 2 17:37:13 localhost kernel: [ 886.216935] EFLAGS: 00010246 (2.6.23-rc9-cfs-v22-dirty #82) Oct 2 17:37:13 localhost kernel: [ 886.217129] EIP is at os_set_mlock_capability+0xc/0x30 [nvidia] Oct 2 17:37:13 localhost kernel: [ 886.217131] eax: ebx: ecx: 0050 edx: 0202 Oct 2 17:37:13 localhost kernel: [ 886.217134] esi: f74c3000 edi: f749cc00 ebp: df4b3ff0 esp: d319bed4 Oct 2 17:37:13 localhost kernel: [ 886.217136] ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 Oct 2 17:37:13 localhost kernel: [ 886.217139] Process spirographx (pid: 5512, ti=d319b000 task=c45da540 task.ti=d319b000) Oct 2 17:37:13 localhost kernel: [ 886.217141] Stack: f909cd35 f909ed92 f9655740 e1d42c00 f6ca5bc0 f90a0c26 df4b2000 005b Oct 2 17:37:13 localhost kernel: [ 886.217146]000c f909da32 f9655740 e1d42c00 005b f6ca5bc0 f6ca5bc0 005b Oct 2 17:37:13 localhost kernel: [ 886.217151]f9655740 f9370e98 df4b2000 f9655740 e1d42c00 005b f6ca5bc0 Oct 2 17:37:13 localhost kernel: [ 886.217157] Call Trace: Oct 2 17:37:13 localhost kernel: [ 886.217164] [f909cd35] _nv002553rm+0x5/0x10 [nvidia] Oct 2 17:37:13 localhost kernel: [ 886.217259] [f909ed92] rm_write_watch_init+0x3b/0x54 [nvidia] Oct 2 17:37:13 localhost kernel: [ 886.217365] [f90a0c26] _nv002642rm+0x416/0x5e9 [nvidia] Oct 2 17:37:13 localhost kernel: [ 886.217469] [f909da32] rm_ioctl+0x3e/0x6d [nvidia] Oct 2 17:37:13 localhost kernel: [ 886.217578] [f9370e98] nv_kern_ioctl+0xf8/0x3c0 [nvidia] Oct 2 17:37:13 localhost kernel: [ 886.217732] [f9371198] nv_kern_unlocked_ioctl+0x18/0x20 [nvidia] Oct 2 17:37:13 localhost kernel: [ 886.217866] [f9371180] nv_kern_unlocked_ioctl+0x0/0x20 [nvidia] Oct 2 17:37:13 localhost kernel: [ 886.217989] [do_ioctl+43/144] do_ioctl+0x2b/0x90 Oct 2 17:37:13 localhost kernel: [ 886.217994] [remove_vma+57/80] remove_vma+0x39/0x50 Oct 2 17:37:13 localhost kernel: [ 886.218010] [vfs_ioctl+92/656] vfs_ioctl+0x5c/0x290 Oct 2 17:37:13 localhost kernel: [ 886.218022] [sys_ioctl+114/144] sys_ioctl+0x72/0x90 Oct 2 17:37:13 localhost kernel: [ 886.218032] [sysenter_past_esp+95/133] sysenter_past_esp+0x5f/0x85 Oct 2 17:37:13 localhost kernel: [ 886.218060] === Oct 2 17:37:13 localhost kernel: [ 886.218061] Code: bb 86 da c6 31 c0 c3 90 8d b4 26 00 00 00 00 64 a1 00 f0 3e c0 8b 80 dc 00 00 00 c3 8d 76 00 64 a1 00 f0 3e c0 8b 80 8c 04 00 00 c7 80 2c 01 00 00 ff ff ff ff 64 a1 00 f0 3e c0 81 88 ac 01 00 Oct 2 17:37:13 localhost kernel: [ 886.218083] EIP: [f9374d0c] os_set_mlock_capability+0xc/0x30 [nvidia] SS:ESP 0068:d319bed4 but in general there's nothing scheduler-specific about screensavers or wine - but it could be related to 3D mode of the chip (hence related to the nvidia module) - do you get a similar lockup if you try to run 'glxgears'? In fact the backtrace was obtained trying to run glxgears Ingo Alejandro -- Nunca
Re: [patch/backport] CFS scheduler, -v22, for v2.6.23-rc8, v2.6.22.8, v2.6.21.7, v2.6.20.20
El Fri, 28 Sep 2007 23:20:13 -0300 Henrique de Moraes Holschuh <[EMAIL PROTECTED]> escribió: > On Fri, 28 Sep 2007, Alejandro Riveira Fernández wrote: > > I feel it better than 20.5 but the later is more stable. Let me explain. > > > > I patched a 2.6.22.9 kernel with both versions 22 and 20.5[1]. With the 22 > > version if i lock the screen (run screensaver) or i try to run a wine > > program > > i experience a hard lock up no keyboard or mouse and i have to reboot the > > machine (i can not try to access it via ssh because i do not have a second > > machine). > Thanks for the response :D > I have seen that twice with v20.5 under 2.6.22.7/.8. Didn't see it yet with > v22. xterm would get pissed if I tried to "secure keyboard", so something > stole the keyboard focus and wouldn't give it back to xorg. Maybe a locking > bug in xorg somewhere? > > Anyway, my kernel is NOT tainted, so rest assured that at least this one is > not nVidia's fault. > > BTW, v20.5 in 2.6.21.7 would sometimes cause dmcrypt to oops when first > mounting a LUKS volume if there was some non-extra-light disk activity going > on. Probably something missing in the backport to 2.6.21... > > Sorry, days down here have been very busy, so I didn't have time to send a > proper bug report. I can add another data point 2.6.23-rc8-cfs-v22-g1bef7dc0-dirty does not have any problem with wine or xscreensaver is working fine. Again i use nvidia and a 3 party gpl driver for my wifi rt2500 which have compiled fine with the new kernel (surprise surprise!) If you need any more info just ask. Thanks P.S: I use ubuntu feisty fwiw -- Nunca discutas con un idiota. Al final te hacen rebajarte a su nivel y entonces te acaban ganando debido a su mayor experiencia. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [patch/backport] CFS scheduler, -v22, for v2.6.23-rc8, v2.6.22.8, v2.6.21.7, v2.6.20.20
El Fri, 28 Sep 2007 23:20:13 -0300 Henrique de Moraes Holschuh [EMAIL PROTECTED] escribió: On Fri, 28 Sep 2007, Alejandro Riveira Fernández wrote: I feel it better than 20.5 but the later is more stable. Let me explain. I patched a 2.6.22.9 kernel with both versions 22 and 20.5[1]. With the 22 version if i lock the screen (run screensaver) or i try to run a wine program i experience a hard lock up no keyboard or mouse and i have to reboot the machine (i can not try to access it via ssh because i do not have a second machine). Thanks for the response :D I have seen that twice with v20.5 under 2.6.22.7/.8. Didn't see it yet with v22. xterm would get pissed if I tried to secure keyboard, so something stole the keyboard focus and wouldn't give it back to xorg. Maybe a locking bug in xorg somewhere? Anyway, my kernel is NOT tainted, so rest assured that at least this one is not nVidia's fault. BTW, v20.5 in 2.6.21.7 would sometimes cause dmcrypt to oops when first mounting a LUKS volume if there was some non-extra-light disk activity going on. Probably something missing in the backport to 2.6.21... Sorry, days down here have been very busy, so I didn't have time to send a proper bug report. I can add another data point 2.6.23-rc8-cfs-v22-g1bef7dc0-dirty does not have any problem with wine or xscreensaver is working fine. Again i use nvidia and a 3 party gpl driver for my wifi rt2500 which have compiled fine with the new kernel (surprise surprise!) If you need any more info just ask. Thanks P.S: I use ubuntu feisty fwiw -- Nunca discutas con un idiota. Al final te hacen rebajarte a su nivel y entonces te acaban ganando debido a su mayor experiencia. - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [patch/backport] CFS scheduler, -v22, for v2.6.23-rc8, v2.6.22.8, v2.6.21.7, v2.6.20.20
El Wed, 26 Sep 2007 13:13:57 +0200 Ingo Molnar <[EMAIL PROTECTED]> escribió: > By popular demand, here is release -v22 of the CFS scheduler. It is a > full backport of the latest & greatest sched-devel.git code to > v2.6.23-rc8, v2.6.22.8, v2.6.21.7 and v2.6.20.20. The patches can be > downloaded from the usual place: > > http://people.redhat.com/mingo/cfs-scheduler/ > > This is the first time the development version of the scheduler has been > fed back into the stable backport series, so there's many changes since > v20.5: > > 15 files changed, 1103 insertions(+), 840 deletions(-) Thanks for the effort, much apreciated. > > Even if CFS v20.5 worked well for you, please try this release too, with > a good focus on interactivity testing - because, unless some major > showstopper is found, this codebase is intended for a v2.6.24 upstream > merge. > > ( Even a quick, subjective report of: "checked this patch, it didnt > crash and it feels like v20.5" or "laggier than v20.5" or "feels > better than v20.5" is useful to us and enables us to judge the general > direction of interactivity. ) I feel it better than 20.5 but the later is more stable. Let me explain. I patched a 2.6.22.9 kernel with both versions 22 and 20.5[1]. With the 22 version if i lock the screen (run screensaver) or i try to run a wine program i experience a hard lock up no keyboard or mouse and i have to reboot the machine (i can not try to access it via ssh because i do not have a second machine). I run with the nvidia kernel module so I know my report is useless but just for the record... Here it is my config: [1] Hand edited the Makefile hunk no other rejects # # Automatically generated make config: don't edit # Linux kernel version: 2.6.22.9-cfs-v20.5 # Fri Sep 28 16:12:07 2007 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_X86=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_QUICKLIST=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CPUSETS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # # Block layer # CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=m CONFIG_IOSCHED_DEADLINE=m CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_PARAVIRT is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MCORE2 is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set CONFIG_MK8=y # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not
Re: [patch/backport] CFS scheduler, -v22, for v2.6.23-rc8, v2.6.22.8, v2.6.21.7, v2.6.20.20
El Wed, 26 Sep 2007 13:13:57 +0200 Ingo Molnar [EMAIL PROTECTED] escribió: By popular demand, here is release -v22 of the CFS scheduler. It is a full backport of the latest greatest sched-devel.git code to v2.6.23-rc8, v2.6.22.8, v2.6.21.7 and v2.6.20.20. The patches can be downloaded from the usual place: http://people.redhat.com/mingo/cfs-scheduler/ This is the first time the development version of the scheduler has been fed back into the stable backport series, so there's many changes since v20.5: 15 files changed, 1103 insertions(+), 840 deletions(-) Thanks for the effort, much apreciated. Even if CFS v20.5 worked well for you, please try this release too, with a good focus on interactivity testing - because, unless some major showstopper is found, this codebase is intended for a v2.6.24 upstream merge. ( Even a quick, subjective report of: checked this patch, it didnt crash and it feels like v20.5 or laggier than v20.5 or feels better than v20.5 is useful to us and enables us to judge the general direction of interactivity. ) I feel it better than 20.5 but the later is more stable. Let me explain. I patched a 2.6.22.9 kernel with both versions 22 and 20.5[1]. With the 22 version if i lock the screen (run screensaver) or i try to run a wine program i experience a hard lock up no keyboard or mouse and i have to reboot the machine (i can not try to access it via ssh because i do not have a second machine). I run with the nvidia kernel module so I know my report is useless but just for the record... Here it is my config: [1] Hand edited the Makefile hunk no other rejects # # Automatically generated make config: don't edit # Linux kernel version: 2.6.22.9-cfs-v20.5 # Fri Sep 28 16:12:07 2007 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_X86=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_QUICKLIST=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_DEFCONFIG_LIST=/lib/modules/$UNAME_RELEASE/.config # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION= CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CPUSETS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE= # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # # Block layer # CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=m CONFIG_IOSCHED_DEADLINE=m CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED=cfq # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_PARAVIRT is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MCORE2 is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set CONFIG_MK8=y # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set #
[9Pfs] Compilation error
I get this in today's head 8f41958bdd577731f7411c9605cfaa9db6766809 $ make O=../2.6.23 Using /home/alex/kernel/linux-2.6 as source for kernel GEN /home/alex/kernel/2.6.23/Makefile CHK include/linux/version.h CHK include/linux/utsrelease.h CALL/home/alex/kernel/linux-2.6/scripts/checksyscalls.sh CHK include/linux/compile.h CC [M] fs/9p/v9fs.o /home/alex/kernel/linux-2.6/fs/9p/v9fs.c: En la función ‘v9fs_parse_options’: /home/alex/kernel/linux-2.6/fs/9p/v9fs.c:134: error: ‘p9_debug_level’ no se declaró aquí (primer uso en esta función) /home/alex/kernel/linux-2.6/fs/9p/v9fs.c:134: error: (Cada identificador no declarado solamente se reporta una vez /home/alex/kernel/linux-2.6/fs/9p/v9fs.c:134: error: ara cada funcion en la que aparece.) make[3]: *** [fs/9p/v9fs.o] Error 1 make[2]: *** [fs/9p] Error 2 make[1]: *** [fs] Error 2 make: *** [_all] Error 2 * Config # # Automatically generated make config: don't edit # Linux kernel version: 2.6.22 # Mon Jul 16 15:23:24 2007 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_X86=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_QUICKLIST=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CPUSETS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_LSF is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=m CONFIG_IOSCHED_CFQ=m CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_PARAVIRT is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MCORE2 is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set CONFIG_MK8=y # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_HPET_TIMER=y CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_BKL=y
[9Pfs] Compilation error
I get this in today's head 8f41958bdd577731f7411c9605cfaa9db6766809 $ make O=../2.6.23 Using /home/alex/kernel/linux-2.6 as source for kernel GEN /home/alex/kernel/2.6.23/Makefile CHK include/linux/version.h CHK include/linux/utsrelease.h CALL/home/alex/kernel/linux-2.6/scripts/checksyscalls.sh CHK include/linux/compile.h CC [M] fs/9p/v9fs.o /home/alex/kernel/linux-2.6/fs/9p/v9fs.c: En la función ‘v9fs_parse_options’: /home/alex/kernel/linux-2.6/fs/9p/v9fs.c:134: error: ‘p9_debug_level’ no se declaró aquí (primer uso en esta función) /home/alex/kernel/linux-2.6/fs/9p/v9fs.c:134: error: (Cada identificador no declarado solamente se reporta una vez /home/alex/kernel/linux-2.6/fs/9p/v9fs.c:134: error: ara cada funcion en la que aparece.) make[3]: *** [fs/9p/v9fs.o] Error 1 make[2]: *** [fs/9p] Error 2 make[1]: *** [fs] Error 2 make: *** [_all] Error 2 * Config # # Automatically generated make config: don't edit # Linux kernel version: 2.6.22 # Mon Jul 16 15:23:24 2007 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_X86=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_QUICKLIST=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_DEFCONFIG_LIST=/lib/modules/$UNAME_RELEASE/.config # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION= CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CPUSETS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE= # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_LSF is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=m CONFIG_IOSCHED_CFQ=m CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED=anticipatory # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_PARAVIRT is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MCORE2 is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set CONFIG_MK8=y # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_HPET_TIMER=y CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_BKL=y
Re: PATA-disk named sda
El Fri, 6 Jul 2007 10:21:32 +0200 Christoph Pleger <[EMAIL PROTECTED]> escribió: > Hello, > > In the newest Ubuntu Release, my PATA-disk is called sda instead of hda. > Is that a general feature in newer kernel versions or is it a special > feature in Ubuntu? You can get information here https://wiki.ubuntu.com/LibAtaForAtaDisks > > Regards > Christoph > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- Nunca discutas con un idiota. Al final te hacen rebajarte a su nivel y entonces te acaban ganando debido a su mayor experiencia. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: PATA-disk named sda
El Fri, 6 Jul 2007 10:21:32 +0200 Christoph Pleger [EMAIL PROTECTED] escribió: Hello, In the newest Ubuntu Release, my PATA-disk is called sda instead of hda. Is that a general feature in newer kernel versions or is it a special feature in Ubuntu? You can get information here https://wiki.ubuntu.com/LibAtaForAtaDisks Regards Christoph - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ -- Nunca discutas con un idiota. Al final te hacen rebajarte a su nivel y entonces te acaban ganando debido a su mayor experiencia. - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: CONFIG_HIGHMEM4G and 1GB RAM
El Mon, 30 Apr 2007 23:18:28 +0100 Matt Keenan <[EMAIL PROTECTED]> escribió: > William Lee Irwin III wrote: > > The CONFIG_VMSPLIT config options were merged for such cases. > > > > It should be able to split on any 4MB-aligned boundary in > > CONFIG_HIGHMEM4G. CONFIG_VMSPLIT_3G_OPT appears to do something of > > this sort to use an entire 1GB RAM with minimal user address space > > reduction. > > > > This is an ELF ABI violation but the number of major applications > > that break is apparently low. > > > > > wine and some java implementations being two of the big caveats. I'm happily using java6-jre and wine (latest versions) on self compiled vanilla kernels with CONFIG_VMSPLIT_3G_OPT=y For the record i use wine for utorrrent and SwitcherCADIII/LTspice and java for sancho (front end to mldonkey). Some may think it is not a heavy use > > Matt > Alejandro - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: CONFIG_HIGHMEM4G and 1GB RAM
El Mon, 30 Apr 2007 23:18:28 +0100 Matt Keenan [EMAIL PROTECTED] escribió: William Lee Irwin III wrote: The CONFIG_VMSPLIT config options were merged for such cases. It should be able to split on any 4MB-aligned boundary in CONFIG_HIGHMEM4G. CONFIG_VMSPLIT_3G_OPT appears to do something of this sort to use an entire 1GB RAM with minimal user address space reduction. This is an ELF ABI violation but the number of major applications that break is apparently low. wine and some java implementations being two of the big caveats. I'm happily using java6-jre and wine (latest versions) on self compiled vanilla kernels with CONFIG_VMSPLIT_3G_OPT=y For the record i use wine for utorrrent and SwitcherCADIII/LTspice and java for sancho (front end to mldonkey). Some may think it is not a heavy use Matt Alejandro - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: Why is "Memory split" Kconfig option only for EMBEDDED?
El Wed, 6 Dec 2006 14:10:03 +0100 Adrian Bunk <[EMAIL PROTECTED]> escribió: > On Wed, Dec 06, 2006 at 01:19:08PM +0100, Norbert Kiesel wrote: > > On Wed, 2006-12-06 at 12:58 +0100, Arjan van de Ven wrote: > > > On Wed, 2006-12-06 at 12:42 +0100, Norbert Kiesel wrote: > > > > Hi, > > > > > > > > I remember reading on LKML some time ago that using VMSPLIT_3G_OPT would > > > > be optimal for a machine with exactly 1GB memory (like my current > > > > desktop). Why is that option only prompted for after selecting EMBEDDED > > > > (which I normally don't select for desktop machines > > > > > > because it changes the userspace ABI and has some other caveats this > > > is not something you should muck with lightly > > > > > > > Hmm, but it's also marked EXPERIMENTAL. Would that not be the > > sufficient? Assuming I don't use any external/binary drivers and a > > self-compiled kernel w//o any additional patches: is there really any > > downside? > > - Wine doesn't work (I'm not sure about VMSPLIT_3G_OPT, but > VMSPLIT_2G definitely breaks Wine) I use VMSPLIT_3G_OPT=y and wine works just fine (only tested with one program). Edgy + 2.6.19-rc1 > - AFAIR some people reported problems with some Java programs > after fiddling with the vmsplit options > > EMBEDDED isn't exactly the right way to hide it, but the vmsplit options > aren't something you can safely change. > > > > > cu > Adrian > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: Why is Memory split Kconfig option only for EMBEDDED?
El Wed, 6 Dec 2006 14:10:03 +0100 Adrian Bunk [EMAIL PROTECTED] escribió: On Wed, Dec 06, 2006 at 01:19:08PM +0100, Norbert Kiesel wrote: On Wed, 2006-12-06 at 12:58 +0100, Arjan van de Ven wrote: On Wed, 2006-12-06 at 12:42 +0100, Norbert Kiesel wrote: Hi, I remember reading on LKML some time ago that using VMSPLIT_3G_OPT would be optimal for a machine with exactly 1GB memory (like my current desktop). Why is that option only prompted for after selecting EMBEDDED (which I normally don't select for desktop machines because it changes the userspace ABI and has some other caveats this is not something you should muck with lightly Hmm, but it's also marked EXPERIMENTAL. Would that not be the sufficient? Assuming I don't use any external/binary drivers and a self-compiled kernel w//o any additional patches: is there really any downside? - Wine doesn't work (I'm not sure about VMSPLIT_3G_OPT, but VMSPLIT_2G definitely breaks Wine) I use VMSPLIT_3G_OPT=y and wine works just fine (only tested with one program). Edgy + 2.6.19-rc1 - AFAIR some people reported problems with some Java programs after fiddling with the vmsplit options EMBEDDED isn't exactly the right way to hide it, but the vmsplit options aren't something you can safely change. /nk cu Adrian - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
