Re: 2.4.6-pre8 build error of aic7xxxt
Alan Cox wrote: > > > > gcc -I/usr/include -I. -ldb aicasm_gram.c aicasm_scan.c aicasm.c aicasm_symbol.c >-o aicasm > > > /usr/i486-linux/bin/ld: cannot open -ldb: No such file or directory > > > collect2: ld returned 1 exit status > > > make[5]: *** [aicasm] Error 1 > > > [...] > > > -- > > > > may be a 'make mrproper' solves your problem, > > Unlikely since the problem is the fact that the scsi firmware assembler wants > a library that isnt installed. It is not necessary to re-build the firmware (according to Justin). Disable that option and try to rebuild again. -- Rafael - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: 2.4.6-pre8 build error of aic7xxxt
Alan Cox wrote: gcc -I/usr/include -I. -ldb aicasm_gram.c aicasm_scan.c aicasm.c aicasm_symbol.c -o aicasm /usr/i486-linux/bin/ld: cannot open -ldb: No such file or directory collect2: ld returned 1 exit status make[5]: *** [aicasm] Error 1 [...] -- may be a 'make mrproper' solves your problem, Unlikely since the problem is the fact that the scsi firmware assembler wants a library that isnt installed. It is not necessary to re-build the firmware (according to Justin). Disable that option and try to rebuild again. -- Rafael - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: SMP module compilation on UP?
Mark Mokryn wrote: > Is it possible to build an SMP module on a machine running a UP kernel > (or vice versa)? We of course get unresolved symbols during module load > due to the smp prefix on the ksyms, and haven't seen how to get around > it. (Defining __SMP__ does not cut it, though I believe this used to > work a while ago). Yes. It does not matter what kernel you are running. What's important is that you configure your sources. Configure your kernel for SMP and do a 'make dep', then compile your module. -- Rafael - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: SMP module compilation on UP?
Mark Mokryn wrote: Is it possible to build an SMP module on a machine running a UP kernel (or vice versa)? We of course get unresolved symbols during module load due to the smp prefix on the ksyms, and haven't seen how to get around it. (Defining __SMP__ does not cut it, though I believe this used to work a while ago). Yes. It does not matter what kernel you are running. What's important is that you configure your sources. Configure your kernel for SMP and do a 'make dep', then compile your module. -- Rafael - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: Matrox G400 Dualhead
The problem reported here before was switching from X to the console. The video signal would be lost and the computer would hang. The responses pointed out the it was the switch of video modes; XFree would change the internals of the video controller which the frame buffer could not cope with. You were part of the discussion. The matrox drivers have not changed since april, so its interactions with the frame buffer may be still buggy. -- Rafael - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: Matrox G400 Dualhead
The problem reported here before was switching from X to the console. The video signal would be lost and the computer would hang. The responses pointed out the it was the switch of video modes; XFree would change the internals of the video controller which the frame buffer could not cope with. You were part of the discussion. The matrox drivers have not changed since april, so its interactions with the frame buffer may be still buggy. -- Rafael - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: Hard lockup switching to X from vc; Matrox G400 AGP
I experienced lost of the signal when switching from X to the console when booting with vga=ext or some of the graphic modes. It was reported here that the problem was the Matrox drivers. Recently, with kernel 2.4.4+ and XFree 4.0.3 (@1280x1024/head)+ Matrox drivers (http://matrox.com/mga/support/drivers/files/linux_06.cfm) and booting with vga=794 (1280x1024) I have not had problems. I've a G450. -- Rafael - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: Matrox G400 Dualhead
It would help if you reported which version of kernel and XF86 you are using. I had problems using the framebuffer in the console awhile back. Currently, running 2.4.4+ and XFree86 4.0.3 + Matrox's drivers (http://matrox.com/mga/support/drivers/files/linux_06.cfm) give me no problem. I don't run the frame buffer for X for dual head. -- Rafael - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: Matrox G400 Dualhead
It would help if you reported which version of kernel and XF86 you are using. I had problems using the framebuffer in the console awhile back. Currently, running 2.4.4+ and XFree86 4.0.3 + Matrox's drivers (http://matrox.com/mga/support/drivers/files/linux_06.cfm) give me no problem. I don't run the frame buffer for X for dual head. -- Rafael - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: Hard lockup switching to X from vc; Matrox G400 AGP
I experienced lost of the signal when switching from X to the console when booting with vga=ext or some of the graphic modes. It was reported here that the problem was the Matrox drivers. Recently, with kernel 2.4.4+ and XFree 4.0.3 (@1280x1024/head)+ Matrox drivers (http://matrox.com/mga/support/drivers/files/linux_06.cfm) and booting with vga=794 (1280x1024) I have not had problems. I've a G450. -- Rafael - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: write to dvd ram
I tried to give you some pointers in a personal email. So it's not true you didn't receive any response. Also reminded you of the best place to look for info, namely, that driver's mailing list. You don't seem to have made any additional attempts at resolving it yourself since you reposted your original message. Get newer kernel sources, read the driver's documentation more thoroughly. -- Rafael - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: write to dvd ram
I tried to give you some pointers in a personal email. So it's not true you didn't receive any response. Also reminded you of the best place to look for info, namely, that driver's mailing list. You don't seem to have made any additional attempts at resolving it yourself since you reposted your original message. Get newer kernel sources, read the driver's documentation more thoroughly. -- Rafael - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: monitor file writes
This may be what you are looking for: http://oss.sgi.com/projects/fam/ -- Rafael - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: monitor file writes
This may be what you are looking for: http://oss.sgi.com/projects/fam/ -- Rafael - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
