Re: [PATCH] ARM: dts: Add exynos5422-odroidxu4 board
W dniu 01.09.2015 o 21:18, Javier Martinez Canillas pisze: > Hello Krzysztof, > > On 09/01/2015 02:00 PM, Krzysztof Kozlowski wrote: >> W dniu 01.09.2015 o 17:48, Javier Martinez Canillas pisze: > > [snip] > _5 { status = "okay"; >>> >>> since I believe for the Odroid XU4 we would like this to be disabled. >>> The only I2C device in this I2C bus is the max98090 codec which is >>> not present in the XU4. >> >> hsi2c_5 and i2s_0 are not used by board directly but are connected to >> external connector: >> http://www.hardkernel.com/main/products/prdt_info.php?g_code=G143452239825_idx=2 >> >> This is the 12pin GPIO/I2C/I2S connector in bottom-right corner of board >> view. >> > > Thanks for the info, I missed that. > >> This is why I left this and is2_0 enabled on Odroid XU4 - I assumed >> someone may connect something to it. However I have doubts if it is > > Yes, now it makes sense. > >> usable in such state: without respective addresses and interrupts. In >> the same time OF_OVERLAY should customize it properly. >> >> What do you think? >> > > As you said, these are not usable in the current form since if someone > wants to use it, has to add a dev node for the I2C device, possibly a > clock-frequency to change the default operating frequency, etc. > > So has to either create a new DTS based on exynos5422-odroidxu4.dts or > as you said use OF overlays. IMHO these should be left disabled and be > enabled by users when adding the needed stuff. Okay. I'll update the patch by moving entire hsi2c_5 node to audio DTSI (including "okay") and i2s0 thus disabling them on XU4. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH] ARM: dts: Add exynos5422-odroidxu4 board
Hello Krzysztof, On 09/01/2015 02:00 PM, Krzysztof Kozlowski wrote: > W dniu 01.09.2015 o 17:48, Javier Martinez Canillas pisze: [snip] >>> >>> _5 { >>> status = "okay"; >> >> since I believe for the Odroid XU4 we would like this to be disabled. >> The only I2C device in this I2C bus is the max98090 codec which is >> not present in the XU4. > > hsi2c_5 and i2s_0 are not used by board directly but are connected to > external connector: > http://www.hardkernel.com/main/products/prdt_info.php?g_code=G143452239825_idx=2 > > This is the 12pin GPIO/I2C/I2S connector in bottom-right corner of board > view. > Thanks for the info, I missed that. > This is why I left this and is2_0 enabled on Odroid XU4 - I assumed > someone may connect something to it. However I have doubts if it is Yes, now it makes sense. > usable in such state: without respective addresses and interrupts. In > the same time OF_OVERLAY should customize it properly. > > What do you think? > As you said, these are not usable in the current form since if someone wants to use it, has to add a dev node for the I2C device, possibly a clock-frequency to change the default operating frequency, etc. So has to either create a new DTS based on exynos5422-odroidxu4.dts or as you said use OF overlays. IMHO these should be left disabled and be enabled by users when adding the needed stuff. > Thanks for review, > Best regards, > Krzysztof > Best regards, -- Javier Martinez Canillas Open Source Group Samsung Research America -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH] ARM: dts: Add exynos5422-odroidxu4 board
W dniu 01.09.2015 o 17:48, Javier Martinez Canillas pisze: > Hello Krzysztof, > > The patch looks good to me, I just have one small comment. > > On 08/31/2015 05:56 AM, Krzysztof Kozlowski wrote: >> Add Hardkernel Odroid XU4 board Device Tree sources. The board differs >> from Odroid XU3 and XU3-Lite by: >> 1. No green and red leds (except standard red power led). >> 2. No audio codec. >> 3. Two USB3 ports in host mode (no micro USB3 connector for OTG). >> 4. Realtek RTL8153-CG gigabit network adapter (instead of SMSC9514). >> 5. Additional connector with IO ports (I2S_0, I2C_5). >> 6. No DisplayPort. >> 7. No TI INA231 power measurement sensors. >> >> Signed-off-by: Krzysztof Kozlowski >> --- >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi | 56 ++ >> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 90 >> +- >> arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts| 52 + >> arch/arm/boot/dts/exynos5422-odroidxu3.dts | 52 + >> arch/arm/boot/dts/exynos5422-odroidxu4.dts | 48 >> 6 files changed, 210 insertions(+), 89 deletions(-) >> create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi >> create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu4.dts >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index 233159d2eaab..3d27fe34647f 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -123,6 +123,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ >> exynos5420-smdk5420.dtb \ >> exynos5422-odroidxu3.dtb \ >> exynos5422-odroidxu3-lite.dtb \ >> +exynos5422-odroidxu4.dtb \ >> exynos5440-sd5v1.dtb \ >> exynos5440-ssdk5440.dtb \ >> exynos5800-peach-pi.dtb >> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi >> b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi >> new file mode 100644 >> index ..eee16a820484 >> --- /dev/null >> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi >> @@ -0,0 +1,56 @@ >> +/* >> + * Hardkernel Odroid XU3 Audio Codec device tree source >> + * >> + * Copyright (c) 2015 Krzysztof Kozlowski >> + * Copyright (c) 2014 Collabora Ltd. >> + * Copyright (c) 2013 Samsung Electronics Co., Ltd. >> + * http://www.samsung.com >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> +*/ >> + >> +/ { >> +sound: sound { >> +compatible = "simple-audio-card"; >> + >> +simple-audio-card,name = "Odroid-XU3"; >> +simple-audio-card,widgets = >> +"Headphone", "Headphone Jack", >> +"Speakers", "Speakers"; >> +simple-audio-card,routing = >> +"Headphone Jack", "HPL", >> +"Headphone Jack", "HPR", >> +"Headphone Jack", "MICBIAS", >> +"IN1", "Headphone Jack", >> +"Speakers", "SPKL", >> +"Speakers", "SPKR"; >> + >> +simple-audio-card,format = "i2s"; >> +simple-audio-card,bitclock-master = <_codec>; >> +simple-audio-card,frame-master = <_codec>; >> + >> +simple-audio-card,cpu { >> +sound-dai = < 0>; >> +system-clock-frequency = <1920>; >> +}; >> + >> +link0_codec: simple-audio-card,codec { >> +sound-dai = <>; >> +clocks = < CLK_I2S_CDCLK>; >> +}; >> +}; >> +}; >> + >> +_5 { >> +max98090: max98090@10 { >> +compatible = "maxim,max98090"; >> +reg = <0x10>; >> +interrupt-parent = <>; >> +interrupts = <2 0>; >> +clocks = < CLK_I2S_CDCLK>; >> +clock-names = "mclk"; >> +#sound-dai-cells = <0>; >> +}; > > Shouldn't this node also include the status = "okay" ? Let me answer to this in next comment. > >> +}; >> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi >> b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi >> index dd8bc86d9de4..52c34d8e791f 100644 >> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi >> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi >> @@ -46,70 +46,6 @@ >> reset-gpios = < 0 1>; >> }; >> >> -pwmleds { >> -compatible = "pwm-leds"; >> - >> -greenled { >> -label = "green:mmc0"; >> -pwms = < 1 200 0>; >> -pwm-names = "pwm1"; >> -/* >> - * Green LED is much brighter than the others >> - * so limit its max brightness >> - */ >> -max_brightness = <127>; >>
Re: [PATCH] ARM: dts: Add exynos5422-odroidxu4 board
Hello Krzysztof, The patch looks good to me, I just have one small comment. On 08/31/2015 05:56 AM, Krzysztof Kozlowski wrote: > Add Hardkernel Odroid XU4 board Device Tree sources. The board differs > from Odroid XU3 and XU3-Lite by: > 1. No green and red leds (except standard red power led). > 2. No audio codec. > 3. Two USB3 ports in host mode (no micro USB3 connector for OTG). > 4. Realtek RTL8153-CG gigabit network adapter (instead of SMSC9514). > 5. Additional connector with IO ports (I2S_0, I2C_5). > 6. No DisplayPort. > 7. No TI INA231 power measurement sensors. > > Signed-off-by: Krzysztof Kozlowski > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi | 56 ++ > arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 90 > +- > arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts| 52 + > arch/arm/boot/dts/exynos5422-odroidxu3.dts | 52 + > arch/arm/boot/dts/exynos5422-odroidxu4.dts | 48 > 6 files changed, 210 insertions(+), 89 deletions(-) > create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi > create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu4.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 233159d2eaab..3d27fe34647f 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -123,6 +123,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ > exynos5420-smdk5420.dtb \ > exynos5422-odroidxu3.dtb \ > exynos5422-odroidxu3-lite.dtb \ > + exynos5422-odroidxu4.dtb \ > exynos5440-sd5v1.dtb \ > exynos5440-ssdk5440.dtb \ > exynos5800-peach-pi.dtb > diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi > b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi > new file mode 100644 > index ..eee16a820484 > --- /dev/null > +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi > @@ -0,0 +1,56 @@ > +/* > + * Hardkernel Odroid XU3 Audio Codec device tree source > + * > + * Copyright (c) 2015 Krzysztof Kozlowski > + * Copyright (c) 2014 Collabora Ltd. > + * Copyright (c) 2013 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +/ { > + sound: sound { > + compatible = "simple-audio-card"; > + > + simple-audio-card,name = "Odroid-XU3"; > + simple-audio-card,widgets = > + "Headphone", "Headphone Jack", > + "Speakers", "Speakers"; > + simple-audio-card,routing = > + "Headphone Jack", "HPL", > + "Headphone Jack", "HPR", > + "Headphone Jack", "MICBIAS", > + "IN1", "Headphone Jack", > + "Speakers", "SPKL", > + "Speakers", "SPKR"; > + > + simple-audio-card,format = "i2s"; > + simple-audio-card,bitclock-master = <_codec>; > + simple-audio-card,frame-master = <_codec>; > + > + simple-audio-card,cpu { > + sound-dai = < 0>; > + system-clock-frequency = <1920>; > + }; > + > + link0_codec: simple-audio-card,codec { > + sound-dai = <>; > + clocks = < CLK_I2S_CDCLK>; > + }; > + }; > +}; > + > +_5 { > + max98090: max98090@10 { > + compatible = "maxim,max98090"; > + reg = <0x10>; > + interrupt-parent = <>; > + interrupts = <2 0>; > + clocks = < CLK_I2S_CDCLK>; > + clock-names = "mclk"; > + #sound-dai-cells = <0>; > + }; Shouldn't this node also include the status = "okay" ? > +}; > diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi > b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi > index dd8bc86d9de4..52c34d8e791f 100644 > --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi > +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi > @@ -46,70 +46,6 @@ > reset-gpios = < 0 1>; > }; > > - pwmleds { > - compatible = "pwm-leds"; > - > - greenled { > - label = "green:mmc0"; > - pwms = < 1 200 0>; > - pwm-names = "pwm1"; > - /* > - * Green LED is much brighter than the others > - * so limit its max brightness > - */ > - max_brightness = <127>; > - linux,default-trigger = "mmc0"; > - }; > - > - blueled { > - label = "blue:heartbeat"; > -
Re: [PATCH] ARM: dts: Add exynos5422-odroidxu4 board
Hello Krzysztof, The patch looks good to me, I just have one small comment. On 08/31/2015 05:56 AM, Krzysztof Kozlowski wrote: > Add Hardkernel Odroid XU4 board Device Tree sources. The board differs > from Odroid XU3 and XU3-Lite by: > 1. No green and red leds (except standard red power led). > 2. No audio codec. > 3. Two USB3 ports in host mode (no micro USB3 connector for OTG). > 4. Realtek RTL8153-CG gigabit network adapter (instead of SMSC9514). > 5. Additional connector with IO ports (I2S_0, I2C_5). > 6. No DisplayPort. > 7. No TI INA231 power measurement sensors. > > Signed-off-by: Krzysztof Kozlowski> --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi | 56 ++ > arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 90 > +- > arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts| 52 + > arch/arm/boot/dts/exynos5422-odroidxu3.dts | 52 + > arch/arm/boot/dts/exynos5422-odroidxu4.dts | 48 > 6 files changed, 210 insertions(+), 89 deletions(-) > create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi > create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu4.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 233159d2eaab..3d27fe34647f 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -123,6 +123,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ > exynos5420-smdk5420.dtb \ > exynos5422-odroidxu3.dtb \ > exynos5422-odroidxu3-lite.dtb \ > + exynos5422-odroidxu4.dtb \ > exynos5440-sd5v1.dtb \ > exynos5440-ssdk5440.dtb \ > exynos5800-peach-pi.dtb > diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi > b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi > new file mode 100644 > index ..eee16a820484 > --- /dev/null > +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi > @@ -0,0 +1,56 @@ > +/* > + * Hardkernel Odroid XU3 Audio Codec device tree source > + * > + * Copyright (c) 2015 Krzysztof Kozlowski > + * Copyright (c) 2014 Collabora Ltd. > + * Copyright (c) 2013 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +/ { > + sound: sound { > + compatible = "simple-audio-card"; > + > + simple-audio-card,name = "Odroid-XU3"; > + simple-audio-card,widgets = > + "Headphone", "Headphone Jack", > + "Speakers", "Speakers"; > + simple-audio-card,routing = > + "Headphone Jack", "HPL", > + "Headphone Jack", "HPR", > + "Headphone Jack", "MICBIAS", > + "IN1", "Headphone Jack", > + "Speakers", "SPKL", > + "Speakers", "SPKR"; > + > + simple-audio-card,format = "i2s"; > + simple-audio-card,bitclock-master = <_codec>; > + simple-audio-card,frame-master = <_codec>; > + > + simple-audio-card,cpu { > + sound-dai = < 0>; > + system-clock-frequency = <1920>; > + }; > + > + link0_codec: simple-audio-card,codec { > + sound-dai = <>; > + clocks = < CLK_I2S_CDCLK>; > + }; > + }; > +}; > + > +_5 { > + max98090: max98090@10 { > + compatible = "maxim,max98090"; > + reg = <0x10>; > + interrupt-parent = <>; > + interrupts = <2 0>; > + clocks = < CLK_I2S_CDCLK>; > + clock-names = "mclk"; > + #sound-dai-cells = <0>; > + }; Shouldn't this node also include the status = "okay" ? > +}; > diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi > b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi > index dd8bc86d9de4..52c34d8e791f 100644 > --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi > +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi > @@ -46,70 +46,6 @@ > reset-gpios = < 0 1>; > }; > > - pwmleds { > - compatible = "pwm-leds"; > - > - greenled { > - label = "green:mmc0"; > - pwms = < 1 200 0>; > - pwm-names = "pwm1"; > - /* > - * Green LED is much brighter than the others > - * so limit its max brightness > - */ > - max_brightness = <127>; > - linux,default-trigger = "mmc0"; > - }; > - > - blueled { > - label = "blue:heartbeat"; >
Re: [PATCH] ARM: dts: Add exynos5422-odroidxu4 board
W dniu 01.09.2015 o 21:18, Javier Martinez Canillas pisze: > Hello Krzysztof, > > On 09/01/2015 02:00 PM, Krzysztof Kozlowski wrote: >> W dniu 01.09.2015 o 17:48, Javier Martinez Canillas pisze: > > [snip] > _5 { status = "okay"; >>> >>> since I believe for the Odroid XU4 we would like this to be disabled. >>> The only I2C device in this I2C bus is the max98090 codec which is >>> not present in the XU4. >> >> hsi2c_5 and i2s_0 are not used by board directly but are connected to >> external connector: >> http://www.hardkernel.com/main/products/prdt_info.php?g_code=G143452239825_idx=2 >> >> This is the 12pin GPIO/I2C/I2S connector in bottom-right corner of board >> view. >> > > Thanks for the info, I missed that. > >> This is why I left this and is2_0 enabled on Odroid XU4 - I assumed >> someone may connect something to it. However I have doubts if it is > > Yes, now it makes sense. > >> usable in such state: without respective addresses and interrupts. In >> the same time OF_OVERLAY should customize it properly. >> >> What do you think? >> > > As you said, these are not usable in the current form since if someone > wants to use it, has to add a dev node for the I2C device, possibly a > clock-frequency to change the default operating frequency, etc. > > So has to either create a new DTS based on exynos5422-odroidxu4.dts or > as you said use OF overlays. IMHO these should be left disabled and be > enabled by users when adding the needed stuff. Okay. I'll update the patch by moving entire hsi2c_5 node to audio DTSI (including "okay") and i2s0 thus disabling them on XU4. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH] ARM: dts: Add exynos5422-odroidxu4 board
W dniu 01.09.2015 o 17:48, Javier Martinez Canillas pisze: > Hello Krzysztof, > > The patch looks good to me, I just have one small comment. > > On 08/31/2015 05:56 AM, Krzysztof Kozlowski wrote: >> Add Hardkernel Odroid XU4 board Device Tree sources. The board differs >> from Odroid XU3 and XU3-Lite by: >> 1. No green and red leds (except standard red power led). >> 2. No audio codec. >> 3. Two USB3 ports in host mode (no micro USB3 connector for OTG). >> 4. Realtek RTL8153-CG gigabit network adapter (instead of SMSC9514). >> 5. Additional connector with IO ports (I2S_0, I2C_5). >> 6. No DisplayPort. >> 7. No TI INA231 power measurement sensors. >> >> Signed-off-by: Krzysztof Kozlowski>> --- >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi | 56 ++ >> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 90 >> +- >> arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts| 52 + >> arch/arm/boot/dts/exynos5422-odroidxu3.dts | 52 + >> arch/arm/boot/dts/exynos5422-odroidxu4.dts | 48 >> 6 files changed, 210 insertions(+), 89 deletions(-) >> create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi >> create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu4.dts >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index 233159d2eaab..3d27fe34647f 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -123,6 +123,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ >> exynos5420-smdk5420.dtb \ >> exynos5422-odroidxu3.dtb \ >> exynos5422-odroidxu3-lite.dtb \ >> +exynos5422-odroidxu4.dtb \ >> exynos5440-sd5v1.dtb \ >> exynos5440-ssdk5440.dtb \ >> exynos5800-peach-pi.dtb >> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi >> b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi >> new file mode 100644 >> index ..eee16a820484 >> --- /dev/null >> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi >> @@ -0,0 +1,56 @@ >> +/* >> + * Hardkernel Odroid XU3 Audio Codec device tree source >> + * >> + * Copyright (c) 2015 Krzysztof Kozlowski >> + * Copyright (c) 2014 Collabora Ltd. >> + * Copyright (c) 2013 Samsung Electronics Co., Ltd. >> + * http://www.samsung.com >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> +*/ >> + >> +/ { >> +sound: sound { >> +compatible = "simple-audio-card"; >> + >> +simple-audio-card,name = "Odroid-XU3"; >> +simple-audio-card,widgets = >> +"Headphone", "Headphone Jack", >> +"Speakers", "Speakers"; >> +simple-audio-card,routing = >> +"Headphone Jack", "HPL", >> +"Headphone Jack", "HPR", >> +"Headphone Jack", "MICBIAS", >> +"IN1", "Headphone Jack", >> +"Speakers", "SPKL", >> +"Speakers", "SPKR"; >> + >> +simple-audio-card,format = "i2s"; >> +simple-audio-card,bitclock-master = <_codec>; >> +simple-audio-card,frame-master = <_codec>; >> + >> +simple-audio-card,cpu { >> +sound-dai = < 0>; >> +system-clock-frequency = <1920>; >> +}; >> + >> +link0_codec: simple-audio-card,codec { >> +sound-dai = <>; >> +clocks = < CLK_I2S_CDCLK>; >> +}; >> +}; >> +}; >> + >> +_5 { >> +max98090: max98090@10 { >> +compatible = "maxim,max98090"; >> +reg = <0x10>; >> +interrupt-parent = <>; >> +interrupts = <2 0>; >> +clocks = < CLK_I2S_CDCLK>; >> +clock-names = "mclk"; >> +#sound-dai-cells = <0>; >> +}; > > Shouldn't this node also include the status = "okay" ? Let me answer to this in next comment. > >> +}; >> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi >> b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi >> index dd8bc86d9de4..52c34d8e791f 100644 >> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi >> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi >> @@ -46,70 +46,6 @@ >> reset-gpios = < 0 1>; >> }; >> >> -pwmleds { >> -compatible = "pwm-leds"; >> - >> -greenled { >> -label = "green:mmc0"; >> -pwms = < 1 200 0>; >> -pwm-names = "pwm1"; >> -/* >> - * Green LED is much brighter than the others >> - * so limit its max brightness >> - */ >> -
Re: [PATCH] ARM: dts: Add exynos5422-odroidxu4 board
Hello Krzysztof, On 09/01/2015 02:00 PM, Krzysztof Kozlowski wrote: > W dniu 01.09.2015 o 17:48, Javier Martinez Canillas pisze: [snip] >>> >>> _5 { >>> status = "okay"; >> >> since I believe for the Odroid XU4 we would like this to be disabled. >> The only I2C device in this I2C bus is the max98090 codec which is >> not present in the XU4. > > hsi2c_5 and i2s_0 are not used by board directly but are connected to > external connector: > http://www.hardkernel.com/main/products/prdt_info.php?g_code=G143452239825_idx=2 > > This is the 12pin GPIO/I2C/I2S connector in bottom-right corner of board > view. > Thanks for the info, I missed that. > This is why I left this and is2_0 enabled on Odroid XU4 - I assumed > someone may connect something to it. However I have doubts if it is Yes, now it makes sense. > usable in such state: without respective addresses and interrupts. In > the same time OF_OVERLAY should customize it properly. > > What do you think? > As you said, these are not usable in the current form since if someone wants to use it, has to add a dev node for the I2C device, possibly a clock-frequency to change the default operating frequency, etc. So has to either create a new DTS based on exynos5422-odroidxu4.dts or as you said use OF overlays. IMHO these should be left disabled and be enabled by users when adding the needed stuff. > Thanks for review, > Best regards, > Krzysztof > Best regards, -- Javier Martinez Canillas Open Source Group Samsung Research America -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[PATCH] ARM: dts: Add exynos5422-odroidxu4 board
Add Hardkernel Odroid XU4 board Device Tree sources. The board differs from Odroid XU3 and XU3-Lite by: 1. No green and red leds (except standard red power led). 2. No audio codec. 3. Two USB3 ports in host mode (no micro USB3 connector for OTG). 4. Realtek RTL8153-CG gigabit network adapter (instead of SMSC9514). 5. Additional connector with IO ports (I2S_0, I2C_5). 6. No DisplayPort. 7. No TI INA231 power measurement sensors. Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi | 56 ++ arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 90 +- arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts| 52 + arch/arm/boot/dts/exynos5422-odroidxu3.dts | 52 + arch/arm/boot/dts/exynos5422-odroidxu4.dts | 48 6 files changed, 210 insertions(+), 89 deletions(-) create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu4.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 233159d2eaab..3d27fe34647f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -123,6 +123,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5420-smdk5420.dtb \ exynos5422-odroidxu3.dtb \ exynos5422-odroidxu3-lite.dtb \ + exynos5422-odroidxu4.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb \ exynos5800-peach-pi.dtb diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi new file mode 100644 index ..eee16a820484 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -0,0 +1,56 @@ +/* + * Hardkernel Odroid XU3 Audio Codec device tree source + * + * Copyright (c) 2015 Krzysztof Kozlowski + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + sound: sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "Odroid-XU3"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Speakers", "Speakers"; + simple-audio-card,routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "Headphone Jack", "MICBIAS", + "IN1", "Headphone Jack", + "Speakers", "SPKL", + "Speakers", "SPKR"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <_codec>; + simple-audio-card,frame-master = <_codec>; + + simple-audio-card,cpu { + sound-dai = < 0>; + system-clock-frequency = <1920>; + }; + + link0_codec: simple-audio-card,codec { + sound-dai = <>; + clocks = < CLK_I2S_CDCLK>; + }; + }; +}; + +_5 { + max98090: max98090@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <>; + interrupts = <2 0>; + clocks = < CLK_I2S_CDCLK>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index dd8bc86d9de4..52c34d8e791f 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -46,70 +46,6 @@ reset-gpios = < 0 1>; }; - pwmleds { - compatible = "pwm-leds"; - - greenled { - label = "green:mmc0"; - pwms = < 1 200 0>; - pwm-names = "pwm1"; - /* -* Green LED is much brighter than the others -* so limit its max brightness -*/ - max_brightness = <127>; - linux,default-trigger = "mmc0"; - }; - - blueled { - label = "blue:heartbeat"; - pwms = < 2 200 0>; - pwm-names = "pwm2"; - max_brightness = <255>; - linux,default-trigger = "heartbeat"; - }; - }; - - gpioleds { - compatible = "gpio-leds"; - redled { -
[PATCH] ARM: dts: Add exynos5422-odroidxu4 board
Add Hardkernel Odroid XU4 board Device Tree sources. The board differs from Odroid XU3 and XU3-Lite by: 1. No green and red leds (except standard red power led). 2. No audio codec. 3. Two USB3 ports in host mode (no micro USB3 connector for OTG). 4. Realtek RTL8153-CG gigabit network adapter (instead of SMSC9514). 5. Additional connector with IO ports (I2S_0, I2C_5). 6. No DisplayPort. 7. No TI INA231 power measurement sensors. Signed-off-by: Krzysztof Kozlowski k.kozlow...@samsung.com --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi | 56 ++ arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 90 +- arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts| 52 + arch/arm/boot/dts/exynos5422-odroidxu3.dts | 52 + arch/arm/boot/dts/exynos5422-odroidxu4.dts | 48 6 files changed, 210 insertions(+), 89 deletions(-) create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu4.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 233159d2eaab..3d27fe34647f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -123,6 +123,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5420-smdk5420.dtb \ exynos5422-odroidxu3.dtb \ exynos5422-odroidxu3-lite.dtb \ + exynos5422-odroidxu4.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb \ exynos5800-peach-pi.dtb diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi new file mode 100644 index ..eee16a820484 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -0,0 +1,56 @@ +/* + * Hardkernel Odroid XU3 Audio Codec device tree source + * + * Copyright (c) 2015 Krzysztof Kozlowski + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + sound: sound { + compatible = simple-audio-card; + + simple-audio-card,name = Odroid-XU3; + simple-audio-card,widgets = + Headphone, Headphone Jack, + Speakers, Speakers; + simple-audio-card,routing = + Headphone Jack, HPL, + Headphone Jack, HPR, + Headphone Jack, MICBIAS, + IN1, Headphone Jack, + Speakers, SPKL, + Speakers, SPKR; + + simple-audio-card,format = i2s; + simple-audio-card,bitclock-master = link0_codec; + simple-audio-card,frame-master = link0_codec; + + simple-audio-card,cpu { + sound-dai = i2s0 0; + system-clock-frequency = 1920; + }; + + link0_codec: simple-audio-card,codec { + sound-dai = max98090; + clocks = i2s0 CLK_I2S_CDCLK; + }; + }; +}; + +hsi2c_5 { + max98090: max98090@10 { + compatible = maxim,max98090; + reg = 0x10; + interrupt-parent = gpx3; + interrupts = 2 0; + clocks = i2s0 CLK_I2S_CDCLK; + clock-names = mclk; + #sound-dai-cells = 0; + }; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index dd8bc86d9de4..52c34d8e791f 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -46,70 +46,6 @@ reset-gpios = gpd1 0 1; }; - pwmleds { - compatible = pwm-leds; - - greenled { - label = green:mmc0; - pwms = pwm 1 200 0; - pwm-names = pwm1; - /* -* Green LED is much brighter than the others -* so limit its max brightness -*/ - max_brightness = 127; - linux,default-trigger = mmc0; - }; - - blueled { - label = blue:heartbeat; - pwms = pwm 2 200 0; - pwm-names = pwm2; - max_brightness = 255; - linux,default-trigger = heartbeat; - }; - }; - - gpioleds { - compatible = gpio-leds; - redled { - label =