Re: [PATCH] PATCH Documentation translations:translate sound/hd-audio/controls to chinese
hjh writes: > Signed-off-by: hjh > --- > Documentation/translations/zh_CN/index.rst| 1 + > .../zh_CN/sound/hd-audio/controls.rst | 102 ++ > .../zh_CN/sound/hd-audio/index.rst| 14 +++ > .../translations/zh_CN/sound/index.rst| 22 > 4 files changed, 139 insertions(+) > create mode 100644 > Documentation/translations/zh_CN/sound/hd-audio/controls.rst > create mode 100644 Documentation/translations/zh_CN/sound/hd-audio/index.rst > create mode 100644 Documentation/translations/zh_CN/sound/index.rst Applied, thanks. jon
[PATCH] PATCH Documentation translations:translate sound/hd-audio/controls to chinese
Signed-off-by: hjh --- Documentation/translations/zh_CN/index.rst| 1 + .../zh_CN/sound/hd-audio/controls.rst | 102 ++ .../zh_CN/sound/hd-audio/index.rst| 14 +++ .../translations/zh_CN/sound/index.rst| 22 4 files changed, 139 insertions(+) create mode 100644 Documentation/translations/zh_CN/sound/hd-audio/controls.rst create mode 100644 Documentation/translations/zh_CN/sound/hd-audio/index.rst create mode 100644 Documentation/translations/zh_CN/sound/index.rst diff --git a/Documentation/translations/zh_CN/index.rst b/Documentation/translations/zh_CN/index.rst index be6f11176200..2767dacfe86d 100644 --- a/Documentation/translations/zh_CN/index.rst +++ b/Documentation/translations/zh_CN/index.rst @@ -20,6 +20,7 @@ process/index filesystems/index arm64/index + sound/index 目录和表格 -- diff --git a/Documentation/translations/zh_CN/sound/hd-audio/controls.rst b/Documentation/translations/zh_CN/sound/hd-audio/controls.rst new file mode 100644 index ..54c028ab9a40 --- /dev/null +++ b/Documentation/translations/zh_CN/sound/hd-audio/controls.rst @@ -0,0 +1,102 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Chinese translator: Huang Jianghui +- +.. include:: ../../disclaimer-zh_CN.rst +以下为正文 +- +== +高清音频编解码器特定混音器控件 +== + + +此文件解释特定于编解码器的混音器控件. + +瑞昱编解码器 + + +声道模式 + 这是一个用于更改环绕声道设置的枚举控件,仅在环绕声道打开时显示出现。 + 它给出要使用的通道数:"2ch","4ch","6ch",和"8ch"。根据配置,这还控 + 制多I/O插孔的插孔重分配。 + +自动静音模式 + 这是一个枚举控件,用于更改耳机和线路输出插孔的自动静音行为。如果内 + 置扬声器、耳机和/或线路输出插孔在机器上可用,则显示该控件。当只有 + 耳机或者线路输出的时候,它给出”禁用“和”启用“状态。当启用后,插孔插 + 入后扬声器会自动静音。 + + 当耳机和线路输出插孔都存在时,它给出”禁用“、”仅扬声器“和”线路输出+扬 + 声器“。当”仅扬声器“被选择,插入耳机或者线路输出插孔可使扬声器静音, + 但不会使线路输出静音。当线路输出+扬声器被选择,插入耳机插孔会同时使扬 + 声器和线路输出静音。 + + +矽玛特编解码器 +-- + +模拟环回 + 此控件启用/禁用模拟环回电路。只有在编解码器提示中将”lookback“设置为真 + 时才会出现(见HD-Audio.txt)。请注意,在某些编解码器上,模拟环回和正常 + PCM播放是独占的,即当此选项打开时,您将听不到任何PCM流。 + +交换中置/低频 + 交换中置和低频通道顺序,通常情况下,左侧对应中置,右侧对应低频,启动此 + 项后,左边低频,右边中置。 + +耳机作为线路输出 + 当此控制开启时,将耳机视为线路输出插孔。也就是说,耳机不会自动静音其他 + 线路输出,没有耳机放大器被设置到引脚上。 + +麦克风插口模式、线路插孔模式等 + 这些枚举控制输入插孔引脚的方向和偏置。根据插孔类型,它可以设置为”麦克风 + 输入“和”线路输入“以确定输入偏置,或者当引脚是环绕声道的多I/O插孔时,它 + 可以设置为”线路输出“。 + + +威盛编解码器 + + +智能5.1 + 一个枚举控件,用于为环绕输出重新分配多个I/O插孔的任务。当它打开时,相应 + 的输入插孔(通常是线路输入和麦克风输入)被切换为环绕和中央低频输出插孔。 + +独立耳机 + 启用此枚举控制时,耳机输出从单个流(第三个PCM,如hw:0,2)而不是主流路由。 + 如果耳机DAC与侧边或中央低频通道DAC共享,则DAC将自动切换到耳机。 + +环回混合 + 一个用于确定是否启动了模拟环回路由的枚举控件。当它启用后,模拟环回路由到 + 前置通道。同样,耳机与扬声器输出也采用相同的路径。作为一个副作用,当设置 + 此模式后,单个音量控制将不再适用于耳机和扬声器,因为只有一个DAC连接到混 + 音器小部件。 + +动态电源控制 + 此控件决定是否启动每个插孔的动态电源控制检测。启用时,根据插孔的插入情况 + 动态更改组件的电源状态(D0/D3)以节省电量消耗。但是,如果您的系统没有提 + 供正确的插孔检测,这将无法工作;在这种情况下,请关闭此控件。 + +插孔检测 + 此控件仅为VT1708编解码器提供,它不会为每个插孔插拔提供适当的未请求事件。 + 当此控件打开,驱动将轮询插孔检测,以便耳机自动静音可以工作,而关闭此控 + 件将降低功耗。 + + +科胜讯编解码器 +-- + +自动静音模式 + 见瑞昱解码器 + + + +模拟编解码器 + + +通道模式 + 这是一个用于更改环绕声道设置的枚举控件,仅在环绕声道可用时显示。它提供了能 + 被使用的通道数:”2ch“、”4ch“和”6ch“。根据配置,这还控制多I/O插孔的插孔重 + 分配。 + +独立耳机 + 启动此枚举控制后,耳机输出从单个流(第三个PCM,如hw:0,2)而不是主流路由。 diff --git a/Documentation/translations/zh_CN/sound/hd-audio/index.rst b/Documentation/translations/zh_CN/sound/hd-audio/index.rst new file mode 100644 index ..d9885d53b069 --- /dev/null +++ b/Documentation/translations/zh_CN/sound/hd-audio/index.rst @@ -0,0 +1,14 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../../disclaimer-zh_CN.rst + +:Original: :doc:`../../../../sound/hd-audio/index` +:Translator: Huang Jianghui + + +高清音频 + + +.. toctree:: + :maxdepth: 2 + + controls diff --git a/Documentation/translations/zh_CN/sound/index.rst b/Documentation/translations/zh_CN/sound/index.rst new file mode 100644 index ..28d5dca34a63 --- /dev/null +++ b/Documentation/translations/zh_CN/sound/index.rst @@ -0,0 +1,22 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: :doc:`../../../sound/index` +:Translator: Huang Jianghui + + + +Linux 声音子系统文档 + + +.. toctree:: + :maxdepth: 2 + + hd-audio/index + +.. only:: subproject and html + + Indices + === + + * :ref:`genindex` -- 2.20.1
Re: [PATCH] PATCH Documentation translations:translate sound/hd-audio/controls to chinese
Reviewed-by: Alex Shi 在 2021/3/4 下午5:45, hjh 写道: > Signed-off-by: hjh > --- > Documentation/translations/zh_CN/index.rst| 1 + > .../zh_CN/sound/hd-audio/controls.rst | 102 ++ > .../zh_CN/sound/hd-audio/index.rst| 14 +++ > .../translations/zh_CN/sound/index.rst| 22 > 4 files changed, 139 insertions(+) > create mode 100644 > Documentation/translations/zh_CN/sound/hd-audio/controls.rst > create mode 100644 Documentation/translations/zh_CN/sound/hd-audio/index.rst > create mode 100644 Documentation/translations/zh_CN/sound/index.rst > > diff --git a/Documentation/translations/zh_CN/index.rst > b/Documentation/translations/zh_CN/index.rst > index be6f11176200..2767dacfe86d 100644 > --- a/Documentation/translations/zh_CN/index.rst > +++ b/Documentation/translations/zh_CN/index.rst > @@ -20,6 +20,7 @@ > process/index > filesystems/index > arm64/index > + sound/index > > 目录和表格 > -- > diff --git a/Documentation/translations/zh_CN/sound/hd-audio/controls.rst > b/Documentation/translations/zh_CN/sound/hd-audio/controls.rst > new file mode 100644 > index ..54c028ab9a40 > --- /dev/null > +++ b/Documentation/translations/zh_CN/sound/hd-audio/controls.rst > @@ -0,0 +1,102 @@ > +.. SPDX-License-Identifier: GPL-2.0 > + > +Chinese translator: Huang Jianghui > +- > +.. include:: ../../disclaimer-zh_CN.rst > +以下为正文 > +- > +== > +高清音频编解码器特定混音器控件 > +== > + > + > +此文件解释特定于编解码器的混音器控件. > + > +瑞昱编解码器 > + > + > +声道模式 > + 这是一个用于更改环绕声道设置的枚举控件,仅在环绕声道打开时显示出现。 > + 它给出要使用的通道数:"2ch","4ch","6ch",和"8ch"。根据配置,这还控 > + 制多I/O插孔的插孔重分配。 > + > +自动静音模式 > + 这是一个枚举控件,用于更改耳机和线路输出插孔的自动静音行为。如果内 > + 置扬声器、耳机和/或线路输出插孔在机器上可用,则显示该控件。当只有 > + 耳机或者线路输出的时候,它给出”禁用“和”启用“状态。当启用后,插孔插 > + 入后扬声器会自动静音。 > + > + 当耳机和线路输出插孔都存在时,它给出”禁用“、”仅扬声器“和”线路输出+扬 > + 声器“。当”仅扬声器“被选择,插入耳机或者线路输出插孔可使扬声器静音, > + 但不会使线路输出静音。当线路输出+扬声器被选择,插入耳机插孔会同时使扬 > + 声器和线路输出静音。 > + > + > +矽玛特编解码器 > +-- > + > +模拟环回 > + 此控件启用/禁用模拟环回电路。只有在编解码器提示中将”lookback“设置为真 > + 时才会出现(见HD-Audio.txt)。请注意,在某些编解码器上,模拟环回和正常 > + PCM播放是独占的,即当此选项打开时,您将听不到任何PCM流。 > + > +交换中置/低频 > + 交换中置和低频通道顺序,通常情况下,左侧对应中置,右侧对应低频,启动此 > + 项后,左边低频,右边中置。 > + > +耳机作为线路输出 > + 当此控制开启时,将耳机视为线路输出插孔。也就是说,耳机不会自动静音其他 > + 线路输出,没有耳机放大器被设置到引脚上。 > + > +麦克风插口模式、线路插孔模式等 > + 这些枚举控制输入插孔引脚的方向和偏置。根据插孔类型,它可以设置为”麦克风 > + 输入“和”线路输入“以确定输入偏置,或者当引脚是环绕声道的多I/O插孔时,它 > + 可以设置为”线路输出“。 > + > + > +威盛编解码器 > + > + > +智能5.1 > + 一个枚举控件,用于为环绕输出重新分配多个I/O插孔的任务。当它打开时,相应 > + 的输入插孔(通常是线路输入和麦克风输入)被切换为环绕和中央低频输出插孔。 > + > +独立耳机 > + 启用此枚举控制时,耳机输出从单个流(第三个PCM,如hw:0,2)而不是主流路由。 > + 如果耳机DAC与侧边或中央低频通道DAC共享,则DAC将自动切换到耳机。 > + > +环回混合 > + 一个用于确定是否启动了模拟环回路由的枚举控件。当它启用后,模拟环回路由到 > + 前置通道。同样,耳机与扬声器输出也采用相同的路径。作为一个副作用,当设置 > + 此模式后,单个音量控制将不再适用于耳机和扬声器,因为只有一个DAC连接到混 > + 音器小部件。 > + > +动态电源控制 > + 此控件决定是否启动每个插孔的动态电源控制检测。启用时,根据插孔的插入情况 > + 动态更改组件的电源状态(D0/D3)以节省电量消耗。但是,如果您的系统没有提 > + 供正确的插孔检测,这将无法工作;在这种情况下,请关闭此控件。 > + > +插孔检测 > + 此控件仅为VT1708编解码器提供,它不会为每个插孔插拔提供适当的未请求事件。 > + 当此控件打开,驱动将轮询插孔检测,以便耳机自动静音可以工作,而关闭此控 > + 件将降低功耗。 > + > + > +科胜讯编解码器 > +-- > + > +自动静音模式 > + 见瑞昱解码器 > + > + > + > +模拟编解码器 > + > + > +通道模式 > + 这是一个用于更改环绕声道设置的枚举控件,仅在环绕声道可用时显示。它提供了能 > + 被使用的通道数:”2ch“、”4ch“和”6ch“。根据配置,这还控制多I/O插孔的插孔重 > + 分配。 > + > +独立耳机 > + 启动此枚举控制后,耳机输出从单个流(第三个PCM,如hw:0,2)而不是主流路由。 > diff --git a/Documentation/translations/zh_CN/sound/hd-audio/index.rst > b/Documentation/translations/zh_CN/sound/hd-audio/index.rst > new file mode 100644 > index ..d9885d53b069 > --- /dev/null > +++ b/Documentation/translations/zh_CN/sound/hd-audio/index.rst > @@ -0,0 +1,14 @@ > +.. SPDX-License-Identifier: GPL-2.0 > +.. include:: ../../disclaimer-zh_CN.rst > + > +:Original: :doc:`../../../../sound/hd-audio/index` > +:Translator: Huang Jianghui > + > + > +高清音频 > + > + > +.. toctree:: > + :maxdepth: 2 > + > + controls > diff --git a/Documentation/translations/zh_CN/sound/index.rst > b/Documentation/translations/zh_CN/sound/index.rst > new file mode 100644 > index ..28d5dca34a63 > --- /dev/null > +++ b/Documentation/translations/zh_CN/sound/index.rst > @@ -0,0 +1,22 @@ > +.. SPDX-License-Identifier: GPL-2.0 > +.. include:: ../disclaimer-zh_CN.rst > + > +:Original: :doc:`../../../sound/index` > +:Translator: Huang Jianghui > + > + > + > +Linux 声音子系统文档 > + > + > +.. toctree:: > + :maxdepth: 2 > + > + hd-audio/index > + > +.. only:: subproject and html > + > + Indices > + === > + > + * :ref:`genindex` >
Re: [PATCH] PATCH Documentation translations:translate sound/hd-audio/controls to chinese
在 2021/3/2 下午5:13, huangjianghui 写道: >> we usually include patch into email instead of attach it as attachment. >> You can try use 'git send-email' to post your patches. >> >> Thanks >> Alex >> >> > I am sorry to do those, my patch is shown below: Hi Jianghui, I cann't apply your patch: $ g am ../Re_\ \[PATCH\]\ PATCH\ Documentation\ translations_translate\ sound_hd-audio_controls\ to\ chinese.eml Applying: PATCH Documentation translations:translate sound/hd-audio/controls to chinese error: patch failed: Documentation/translations/zh_CN/index.rst:20 error: Documentation/translations/zh_CN/index.rst: patch does not apply Patch failed at 0001 PATCH Documentation translations:translate sound/hd-audio/controls to chinese hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". You'd better try to use 'git am' apply your email patch from your email client, before send it to linux-doc. There are some process doc of how community working: https://landlock.io/linux-doc/landlock-v27/translations/zh_CN/process/ Thanks Alex
Re: [PATCH] PATCH Documentation translations:translate sound/hd-audio/controls to chinese
On Tue, Mar 02, 2021 at 03:34:33PM +0800, Alex Shi wrote: > > > 在 2021/3/2 上午11:22, huangjianghui 写道: > >> > > In the next patch ,I deleted the index of the untranstated files,and i > > used checkpatch.pl to detect doc errors and tried to built the htmldocs > > on my pc. > > > > Thanks, > > > > Huang Jianghui > > Hi Jianghui, > > we usually include patch into email instead of attach it as attachment. > You can try use 'git send-email' to post your patches. > > Thanks > Alex > > I am sorry to do those, my patch is shown below: Signed-off-by: hjh --- Documentation/translations/zh_CN/index.rst| 1 + .../zh_CN/sound/hd-audio/controls.rst | 102 ++ .../zh_CN/sound/hd-audio/index.rst| 14 +++ .../translations/zh_CN/sound/index.rst| 22 4 files changed, 139 insertions(+) create mode 100644 Documentation/translations/zh_CN/sound/hd-audio/controls.rst create mode 100644 Documentation/translations/zh_CN/sound/hd-audio/index.rst create mode 100644 Documentation/translations/zh_CN/sound/index.rst diff --git a/Documentation/translations/zh_CN/index.rst b/Documentation/translations/zh_CN/index.rst index be6f11176200..2767dacfe86d 100644 --- a/Documentation/translations/zh_CN/index.rst +++ b/Documentation/translations/zh_CN/index.rst @@ -20,6 +20,7 @@ process/index filesystems/index arm64/index + sound/index 目录和表格 -- diff --git a/Documentation/translations/zh_CN/sound/hd-audio/controls.rst b/Documentation/translations/zh_CN/sound/hd-audio/controls.rst new file mode 100644 index ..54c028ab9a40 --- /dev/null +++ b/Documentation/translations/zh_CN/sound/hd-audio/controls.rst @@ -0,0 +1,102 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Chinese translator: Huang Jianghui +- +.. include:: ../../disclaimer-zh_CN.rst +以下为正文 +- +== +高清音频编解码器特定混音器控件 +== + + +此文件解释特定于编解码器的混音器控件. + +瑞昱编解码器 + + +声道模式 + 这是一个用于更改环绕声道设置的枚举控件,仅在环绕声道打开时显示出现。 + 它给出要使用的通道数:"2ch","4ch","6ch",和"8ch"。根据配置,这还控 + 制多I/O插孔的插孔重分配。 + +自动静音模式 + 这是一个枚举控件,用于更改耳机和线路输出插孔的自动静音行为。如果内 + 置扬声器、耳机和/或线路输出插孔在机器上可用,则显示该控件。当只有 + 耳机或者线路输出的时候,它给出”禁用“和”启用“状态。当启用后,插孔插 + 入后扬声器会自动静音。 + + 当耳机和线路输出插孔都存在时,它给出”禁用“、”仅扬声器“和”线路输出+扬 + 声器“。当”仅扬声器“被选择,插入耳机或者线路输出插孔可使扬声器静音, + 但不会使线路输出静音。当线路输出+扬声器被选择,插入耳机插孔会同时使扬 + 声器和线路输出静音。 + + +矽玛特编解码器 +-- + +模拟环回 + 此控件启用/禁用模拟环回电路。只有在编解码器提示中将”lookback“设置为真 + 时才会出现(见HD-Audio.txt)。请注意,在某些编解码器上,模拟环回和正常 + PCM播放是独占的,即当此选项打开时,您将听不到任何PCM流。 + +交换中置/低频 + 交换中置和低频通道顺序,通常情况下,左侧对应中置,右侧对应低频,启动此 + 项后,左边低频,右边中置。 + +耳机作为线路输出 + 当此控制开启时,将耳机视为线路输出插孔。也就是说,耳机不会自动静音其他 + 线路输出,没有耳机放大器被设置到引脚上。 + +麦克风插口模式、线路插孔模式等 + 这些枚举控制输入插孔引脚的方向和偏置。根据插孔类型,它可以设置为”麦克风 + 输入“和”线路输入“以确定输入偏置,或者当引脚是环绕声道的多I/O插孔时,它 + 可以设置为”线路输出“。 + + +威盛编解码器 + + +智能5.1 + 一个枚举控件,用于为环绕输出重新分配多个I/O插孔的任务。当它打开时,相应 + 的输入插孔(通常是线路输入和麦克风输入)被切换为环绕和中央低频输出插孔。 + +独立耳机 + 启用此枚举控制时,耳机输出从单个流(第三个PCM,如hw:0,2)而不是主流路由。 + 如果耳机DAC与侧边或中央低频通道DAC共享,则DAC将自动切换到耳机。 + +环回混合 + 一个用于确定是否启动了模拟环回路由的枚举控件。当它启用后,模拟环回路由到 + 前置通道。同样,耳机与扬声器输出也采用相同的路径。作为一个副作用,当设置 + 此模式后,单个音量控制将不再适用于耳机和扬声器,因为只有一个DAC连接到混 + 音器小部件。 + +动态电源控制 + 此控件决定是否启动每个插孔的动态电源控制检测。启用时,根据插孔的插入情况 + 动态更改组件的电源状态(D0/D3)以节省电量消耗。但是,如果您的系统没有提 + 供正确的插孔检测,这将无法工作;在这种情况下,请关闭此控件。 + +插孔检测 + 此控件仅为VT1708编解码器提供,它不会为每个插孔插拔提供适当的未请求事件。 + 当此控件打开,驱动将轮询插孔检测,以便耳机自动静音可以工作,而关闭此控 + 件将降低功耗。 + + +科胜讯编解码器 +-- + +自动静音模式 + 见瑞昱解码器 + + + +模拟编解码器 + + +通道模式 + 这是一个用于更改环绕声道设置的枚举控件,仅在环绕声道可用时显示。它提供了能 + 被使用的通道数:”2ch“、”4ch“和”6ch“。根据配置,这还控制多I/O插孔的插孔重 + 分配。 + +独立耳机 + 启动此枚举控制后,耳机输出从单个流(第三个PCM,如hw:0,2)而不是主流路由。 diff --git a/Documentation/translations/zh_CN/sound/hd-audio/index.rst b/Documentation/translations/zh_CN/sound/hd-audio/index.rst new file mode 100644 index ..d9885d53b069 --- /dev/null +++ b/Documentation/translations/zh_CN/sound/hd-audio/index.rst @@ -0,0 +1,14 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../../disclaimer-zh_CN.rst + +:Original: :doc:`../../../../sound/hd-audio/index` +:Translator: Huang Jianghui + + +高清音频 + + +.. toctree:: + :maxdepth: 2 + + controls diff --git a/Documentation/translations/zh_CN/sound/index.rst b/Documentation/translations/zh_CN/sound/index.rst new file mode 100644 index ..28d5dca34a63 --- /dev/null +++ b/Documentation/translations/zh_CN/sound/index.rst @@ -0,0 +1,22 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: :doc:`../../../sound/index` +:Translator: Huang Jianghui + + + +Linux 声音子系统文档 + + +.. toctree:: + :maxdepth: 2 + + hd-audio/index + +.. only:: subproject and html + + Indices + === + + * :ref:`genindex` -- 2.20.1 Thanks, Huang Jianghui
Re: [PATCH] PATCH Documentation translations:translate sound/hd-audio/controls to chinese
在 2021/3/2 上午11:22, huangjianghui 写道: >> > In the next patch ,I deleted the index of the untranstated files,and i > used checkpatch.pl to detect doc errors and tried to built the htmldocs > on my pc. > > Thanks, > > Huang Jianghui Hi Jianghui, we usually include patch into email instead of attach it as attachment. You can try use 'git send-email' to post your patches. Thanks Alex
Re: [PATCH] PATCH Documentation translations:translate sound/hd-audio/controls to chinese
On Mon, Mar 01, 2021 at 02:16:36PM -0700, Jonathan Corbet wrote: > > So you have sent me two versions of this in the last 24 hours with no > indication of what has changed or why I should prefer one over the > other. Always include that information (under the "---" line) when you > send updated versions. > > It looks like you got a Reviewed-by tag from Alex on the other version, > but that doesn't appear here; why? > > [...] > Thank you very much for your advices, I sent two emails ,and As a result,I lost the reviewed information of Mr. Alex,I'm sorry for causing of the result. [...] > So you list a bunch of files here, but most of them are not added in > your patch. That will, of course, break the docs build. > > > What are all of these files? > > Please fix these issues and make sure that the docs build runs correctly > before resubmitting. > > Thanks, > > jon > > In the next patch ,I deleted the index of the untranstated files,and i used checkpatch.pl to detect doc errors and tried to built the htmldocs on my pc. Thanks, Huang Jianghui >From 47c05e4fe540e938fc7a9fa13a2f8698579a4744 Mon Sep 17 00:00:00 2001 From: hjh Date: Tue, 2 Mar 2021 10:52:18 +0800 Subject: [PATCH] PATCH Documentation translations:translate sound/hd-audio/controls to chinese Signed-off-by: hjh --- Documentation/translations/zh_CN/index.rst| 1 + .../zh_CN/sound/hd-audio/controls.rst | 102 ++ .../zh_CN/sound/hd-audio/index.rst| 14 +++ .../translations/zh_CN/sound/index.rst| 22 4 files changed, 139 insertions(+) create mode 100644 Documentation/translations/zh_CN/sound/hd-audio/controls.rst create mode 100644 Documentation/translations/zh_CN/sound/hd-audio/index.rst create mode 100644 Documentation/translations/zh_CN/sound/index.rst diff --git a/Documentation/translations/zh_CN/index.rst b/Documentation/translations/zh_CN/index.rst index be6f11176200..2767dacfe86d 100644 --- a/Documentation/translations/zh_CN/index.rst +++ b/Documentation/translations/zh_CN/index.rst @@ -20,6 +20,7 @@ process/index filesystems/index arm64/index + sound/index 目录和表格 -- diff --git a/Documentation/translations/zh_CN/sound/hd-audio/controls.rst b/Documentation/translations/zh_CN/sound/hd-audio/controls.rst new file mode 100644 index ..54c028ab9a40 --- /dev/null +++ b/Documentation/translations/zh_CN/sound/hd-audio/controls.rst @@ -0,0 +1,102 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Chinese translator: Huang Jianghui +- +.. include:: ../../disclaimer-zh_CN.rst +以下为正文 +- +== +高清音频编解码器特定混音器控件 +== + + +此文件解释特定于编解码器的混音器控件. + +瑞昱编解码器 + + +声道模式 + 这是一个用于更改环绕声道设置的枚举控件,仅在环绕声道打开时显示出现。 + 它给出要使用的通道数:"2ch","4ch","6ch",和"8ch"。根据配置,这还控 + 制多I/O插孔的插孔重分配。 + +自动静音模式 + 这是一个枚举控件,用于更改耳机和线路输出插孔的自动静音行为。如果内 + 置扬声器、耳机和/或线路输出插孔在机器上可用,则显示该控件。当只有 + 耳机或者线路输出的时候,它给出”禁用“和”启用“状态。当启用后,插孔插 + 入后扬声器会自动静音。 + + 当耳机和线路输出插孔都存在时,它给出”禁用“、”仅扬声器“和”线路输出+扬 + 声器“。当”仅扬声器“被选择,插入耳机或者线路输出插孔可使扬声器静音, + 但不会使线路输出静音。当线路输出+扬声器被选择,插入耳机插孔会同时使扬 + 声器和线路输出静音。 + + +矽玛特编解码器 +-- + +模拟环回 + 此控件启用/禁用模拟环回电路。只有在编解码器提示中将”lookback“设置为真 + 时才会出现(见HD-Audio.txt)。请注意,在某些编解码器上,模拟环回和正常 + PCM播放是独占的,即当此选项打开时,您将听不到任何PCM流。 + +交换中置/低频 + 交换中置和低频通道顺序,通常情况下,左侧对应中置,右侧对应低频,启动此 + 项后,左边低频,右边中置。 + +耳机作为线路输出 + 当此控制开启时,将耳机视为线路输出插孔。也就是说,耳机不会自动静音其他 + 线路输出,没有耳机放大器被设置到引脚上。 + +麦克风插口模式、线路插孔模式等 + 这些枚举控制输入插孔引脚的方向和偏置。根据插孔类型,它可以设置为”麦克风 + 输入“和”线路输入“以确定输入偏置,或者当引脚是环绕声道的多I/O插孔时,它 + 可以设置为”线路输出“。 + + +威盛编解码器 + + +智能5.1 + 一个枚举控件,用于为环绕输出重新分配多个I/O插孔的任务。当它打开时,相应 + 的输入插孔(通常是线路输入和麦克风输入)被切换为环绕和中央低频输出插孔。 + +独立耳机 + 启用此枚举控制时,耳机输出从单个流(第三个PCM,如hw:0,2)而不是主流路由。 + 如果耳机DAC与侧边或中央低频通道DAC共享,则DAC将自动切换到耳机。 + +环回混合 + 一个用于确定是否启动了模拟环回路由的枚举控件。当它启用后,模拟环回路由到 + 前置通道。同样,耳机与扬声器输出也采用相同的路径。作为一个副作用,当设置 + 此模式后,单个音量控制将不再适用于耳机和扬声器,因为只有一个DAC连接到混 + 音器小部件。 + +动态电源控制 + 此控件决定是否启动每个插孔的动态电源控制检测。启用时,根据插孔的插入情况 + 动态更改组件的电源状态(D0/D3)以节省电量消耗。但是,如果您的系统没有提 + 供正确的插孔检测,这将无法工作;在这种情况下,请关闭此控件。 + +插孔检测 + 此控件仅为VT1708编解码器提供,它不会为每个插孔插拔提供适当的未请求事件。 + 当此控件打开,驱动将轮询插孔检测,以便耳机自动静音可以工作,而关闭此控 + 件将降低功耗。 + + +科胜讯编解码器 +-- + +自动静音模式 + 见瑞昱解码器 + + + +模拟编解码器 + + +通道模式 + 这是一个用于更改环绕声道设置的枚举控件,仅在环绕声道可用时显示。它提供了能 + 被使用的通道数:”2ch“、”4ch“和”6ch“。根据配置,这还控制多I/O插孔的插孔重 + 分配。 + +独立耳机 + 启动此枚举控制后,耳机输出从单个流(第三个PCM,如hw:0,2)而不是主流路由。 diff --git a/Documentation/translations/zh_CN/sound/hd-audio/index.rst b/Documentation/translations/zh_CN/sound/hd-audio/index.rst new file mode 100644 index ..d9885d53b069 --- /dev/null +++ b/Documentation/translations/zh_CN/sound/hd-audio/index.rst @@ -0,0 +1,14 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../../disclaimer
Re: [PATCH] PATCH Documentation translations:translate sound/hd-audio/controls to chinese
hjh writes: > Signed-off-by: hjh > --- > Documentation/translations/zh_CN/index.rst| 1 + > .../zh_CN/sound/hd-audio/controls.rst | 102 ++ > .../zh_CN/sound/hd-audio/index.rst| 17 +++ > .../translations/zh_CN/sound/index.rst| 26 + > 4 files changed, 146 insertions(+) > create mode 100644 > Documentation/translations/zh_CN/sound/hd-audio/controls.rst > create mode 100644 Documentation/translations/zh_CN/sound/hd-audio/index.rst > create mode 100644 Documentation/translations/zh_CN/sound/index.rst So you have sent me two versions of this in the last 24 hours with no indication of what has changed or why I should prefer one over the other. Always include that information (under the "---" line) when you send updated versions. It looks like you got a Reviewed-by tag from Alex on the other version, but that doesn't appear here; why? [...] > diff --git a/Documentation/translations/zh_CN/sound/hd-audio/index.rst > b/Documentation/translations/zh_CN/sound/hd-audio/index.rst > new file mode 100644 > index ..c287aad51066 > --- /dev/null > +++ b/Documentation/translations/zh_CN/sound/hd-audio/index.rst > @@ -0,0 +1,17 @@ > +.. include:: ../../disclaimer-zh_CN.rst > + > +:Original: :doc:`../../../../sound/hd-audio/index` > +:Translator: Huang Jianghui > + > + > +高清音频 > + > + > +.. toctree:: > + :maxdepth: 2 > + > + notes > + models > + controls > + dp-mst > + realtek-pc-beep So you list a bunch of files here, but most of them are not added in your patch. That will, of course, break the docs build. > diff --git a/Documentation/translations/zh_CN/sound/index.rst > b/Documentation/translations/zh_CN/sound/index.rst > new file mode 100644 > index ..42d86b361e42 > --- /dev/null > +++ b/Documentation/translations/zh_CN/sound/index.rst > @@ -0,0 +1,26 @@ Similarly, including the index.rst file at this level is good, but... > +.. include:: ../disclaimer-zh_CN.rst > + > +:Original: :doc:`../../../sound/index` > +:Translator: Huang Jianghui > + > + > + > +Linux 声音子系统文档 > + > + > +.. toctree:: > + :maxdepth: 2 > + > + kernel-api/index > + designs/index > + soc/index > + alsa-configuration > + hd-audio/index > + cards/index What are all of these files? Please fix these issues and make sure that the docs build runs correctly before resubmitting. Thanks, jon
[PATCH] PATCH Documentation translations:translate sound/hd-audio/controls to chinese
Signed-off-by: hjh --- Documentation/translations/zh_CN/index.rst| 1 + .../zh_CN/sound/hd-audio/controls.rst | 102 ++ .../zh_CN/sound/hd-audio/index.rst| 17 +++ .../translations/zh_CN/sound/index.rst| 26 + 4 files changed, 146 insertions(+) create mode 100644 Documentation/translations/zh_CN/sound/hd-audio/controls.rst create mode 100644 Documentation/translations/zh_CN/sound/hd-audio/index.rst create mode 100644 Documentation/translations/zh_CN/sound/index.rst diff --git a/Documentation/translations/zh_CN/index.rst b/Documentation/translations/zh_CN/index.rst index be6f11176200..2767dacfe86d 100644 --- a/Documentation/translations/zh_CN/index.rst +++ b/Documentation/translations/zh_CN/index.rst @@ -20,6 +20,7 @@ process/index filesystems/index arm64/index + sound/index 目录和表格 -- diff --git a/Documentation/translations/zh_CN/sound/hd-audio/controls.rst b/Documentation/translations/zh_CN/sound/hd-audio/controls.rst new file mode 100644 index ..54c028ab9a40 --- /dev/null +++ b/Documentation/translations/zh_CN/sound/hd-audio/controls.rst @@ -0,0 +1,102 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Chinese translator: Huang Jianghui +- +.. include:: ../../disclaimer-zh_CN.rst +以下为正文 +- +== +高清音频编解码器特定混音器控件 +== + + +此文件解释特定于编解码器的混音器控件. + +瑞昱编解码器 + + +声道模式 + 这是一个用于更改环绕声道设置的枚举控件,仅在环绕声道打开时显示出现。 + 它给出要使用的通道数:"2ch","4ch","6ch",和"8ch"。根据配置,这还控 + 制多I/O插孔的插孔重分配。 + +自动静音模式 + 这是一个枚举控件,用于更改耳机和线路输出插孔的自动静音行为。如果内 + 置扬声器、耳机和/或线路输出插孔在机器上可用,则显示该控件。当只有 + 耳机或者线路输出的时候,它给出”禁用“和”启用“状态。当启用后,插孔插 + 入后扬声器会自动静音。 + + 当耳机和线路输出插孔都存在时,它给出”禁用“、”仅扬声器“和”线路输出+扬 + 声器“。当”仅扬声器“被选择,插入耳机或者线路输出插孔可使扬声器静音, + 但不会使线路输出静音。当线路输出+扬声器被选择,插入耳机插孔会同时使扬 + 声器和线路输出静音。 + + +矽玛特编解码器 +-- + +模拟环回 + 此控件启用/禁用模拟环回电路。只有在编解码器提示中将”lookback“设置为真 + 时才会出现(见HD-Audio.txt)。请注意,在某些编解码器上,模拟环回和正常 + PCM播放是独占的,即当此选项打开时,您将听不到任何PCM流。 + +交换中置/低频 + 交换中置和低频通道顺序,通常情况下,左侧对应中置,右侧对应低频,启动此 + 项后,左边低频,右边中置。 + +耳机作为线路输出 + 当此控制开启时,将耳机视为线路输出插孔。也就是说,耳机不会自动静音其他 + 线路输出,没有耳机放大器被设置到引脚上。 + +麦克风插口模式、线路插孔模式等 + 这些枚举控制输入插孔引脚的方向和偏置。根据插孔类型,它可以设置为”麦克风 + 输入“和”线路输入“以确定输入偏置,或者当引脚是环绕声道的多I/O插孔时,它 + 可以设置为”线路输出“。 + + +威盛编解码器 + + +智能5.1 + 一个枚举控件,用于为环绕输出重新分配多个I/O插孔的任务。当它打开时,相应 + 的输入插孔(通常是线路输入和麦克风输入)被切换为环绕和中央低频输出插孔。 + +独立耳机 + 启用此枚举控制时,耳机输出从单个流(第三个PCM,如hw:0,2)而不是主流路由。 + 如果耳机DAC与侧边或中央低频通道DAC共享,则DAC将自动切换到耳机。 + +环回混合 + 一个用于确定是否启动了模拟环回路由的枚举控件。当它启用后,模拟环回路由到 + 前置通道。同样,耳机与扬声器输出也采用相同的路径。作为一个副作用,当设置 + 此模式后,单个音量控制将不再适用于耳机和扬声器,因为只有一个DAC连接到混 + 音器小部件。 + +动态电源控制 + 此控件决定是否启动每个插孔的动态电源控制检测。启用时,根据插孔的插入情况 + 动态更改组件的电源状态(D0/D3)以节省电量消耗。但是,如果您的系统没有提 + 供正确的插孔检测,这将无法工作;在这种情况下,请关闭此控件。 + +插孔检测 + 此控件仅为VT1708编解码器提供,它不会为每个插孔插拔提供适当的未请求事件。 + 当此控件打开,驱动将轮询插孔检测,以便耳机自动静音可以工作,而关闭此控 + 件将降低功耗。 + + +科胜讯编解码器 +-- + +自动静音模式 + 见瑞昱解码器 + + + +模拟编解码器 + + +通道模式 + 这是一个用于更改环绕声道设置的枚举控件,仅在环绕声道可用时显示。它提供了能 + 被使用的通道数:”2ch“、”4ch“和”6ch“。根据配置,这还控制多I/O插孔的插孔重 + 分配。 + +独立耳机 + 启动此枚举控制后,耳机输出从单个流(第三个PCM,如hw:0,2)而不是主流路由。 diff --git a/Documentation/translations/zh_CN/sound/hd-audio/index.rst b/Documentation/translations/zh_CN/sound/hd-audio/index.rst new file mode 100644 index ..c287aad51066 --- /dev/null +++ b/Documentation/translations/zh_CN/sound/hd-audio/index.rst @@ -0,0 +1,17 @@ +.. include:: ../../disclaimer-zh_CN.rst + +:Original: :doc:`../../../../sound/hd-audio/index` +:Translator: Huang Jianghui + + +高清音频 + + +.. toctree:: + :maxdepth: 2 + + notes + models + controls + dp-mst + realtek-pc-beep diff --git a/Documentation/translations/zh_CN/sound/index.rst b/Documentation/translations/zh_CN/sound/index.rst new file mode 100644 index ..42d86b361e42 --- /dev/null +++ b/Documentation/translations/zh_CN/sound/index.rst @@ -0,0 +1,26 @@ +.. include:: ../disclaimer-zh_CN.rst + +:Original: :doc:`../../../sound/index` +:Translator: Huang Jianghui + + + +Linux 声音子系统文档 + + +.. toctree:: + :maxdepth: 2 + + kernel-api/index + designs/index + soc/index + alsa-configuration + hd-audio/index + cards/index + +.. only:: subproject and html + + Indices + === + + * :ref:`genindex` -- 2.20.1
Re: [PATCH] PATCH Documentation translations:translate sound/hd-audio/controls to chinese
在 2021/3/1 上午11:03, hjh 写道: > Signed-off-by: hjh > --- > Documentation/translations/zh_CN/index.rst| 1 + > .../zh_CN/sound/hd-audio/controls.rst | 109 ++ > .../zh_CN/sound/hd-audio/index.rst| 17 +++ > .../translations/zh_CN/sound/index.rst| 26 + > 4 files changed, 153 insertions(+) > create mode 100644 > Documentation/translations/zh_CN/sound/hd-audio/controls.rst > create mode 100644 Documentation/translations/zh_CN/sound/hd-audio/index.rst > create mode 100644 Documentation/translations/zh_CN/sound/index.rst > > diff --git a/Documentation/translations/zh_CN/index.rst > b/Documentation/translations/zh_CN/index.rst > index be6f11176200..2767dacfe86d 100644 > --- a/Documentation/translations/zh_CN/index.rst > +++ b/Documentation/translations/zh_CN/index.rst > @@ -20,6 +20,7 @@ > process/index > filesystems/index > arm64/index > + sound/index > > 目录和表格 > -- > diff --git a/Documentation/translations/zh_CN/sound/hd-audio/controls.rst > b/Documentation/translations/zh_CN/sound/hd-audio/controls.rst > new file mode 100644 > index ..662bacc5a45f > --- /dev/null > +++ b/Documentation/translations/zh_CN/sound/hd-audio/controls.rst > @@ -0,0 +1,109 @@ > +.. SPDX-License-Identifier: GPL-2.0 > +Chinese translated version of Documentation/sound/hd-audio/controls.rst > + > +If you have any comment or update to the content, please contact the > +original document maintainer directly. However, if you have a problem > +communicating in English you can also ask the Chinese maintainer for > +help. Contact the Chinese maintainer if this translation is outdated > +or if there is a problem with the translation. with the disclaimer file, this info could be removed. > + > +Chinese maintainer: Huang Jianghui We call us translator,译者。 Others looks fine for me. Reviewed-by: Alex Shi Thanks Alex > +- > +.. include:: ../../disclaimer-zh_CN.rst > +以下为正文 > +- > +== > +高清音频编解码器特定混音器控件 > +== > + > + > +此文件解释特定于编解码器的混音器控件. > + > +瑞昱编解码器 > + > + > +声道模式 > + 这是一个用于更改环绕声道设置的枚举控件,仅在环绕声道打开时显示出现。 > + 它给出要使用的通道数:"2ch","4ch","6ch",和"8ch"。根据配置,这还控 > + 制多I/O插孔的插孔重分配。 > + > +自动静音模式 > + 这是一个枚举控件,用于更改耳机和线路输出插孔的自动静音行为。如果内 > + 置扬声器、耳机和/或线路输出插孔在机器上可用,则显示该控件。当只有 > + 耳机或者线路输出的时候,它给出”禁用“和”启用“状态。当启用后,插孔插 > + 入后扬声器会自动静音。 > + > + 当耳机和线路输出插孔都存在时,它给出”禁用“、”仅扬声器“和”线路输出+扬 > + 声器“。当”仅扬声器“被选择,插入耳机或者线路输出插孔可使扬声器静音, > + 但不会使线路输出静音。当线路输出+扬声器被选择,插入耳机插孔会同时使扬 > + 声器和线路输出静音。 > + > + > +矽玛特编解码器 > +-- > + > +模拟环回 > + 此控件启用/禁用模拟环回电路。只有在编解码器提示中将”lookback“设置为真 > + 时才会出现(见HD-Audio.txt)。请注意,在某些编解码器上,模拟环回和正常 > + PCM播放是独占的,即当此选项打开时,您将听不到任何PCM流。 > + > +交换中置/低频 > + 交换中置和低频通道顺序,通常情况下,左侧对应中置,右侧对应低频,启动此 > + 项后,左边低频,右边中置。 > + > +耳机作为线路输出 > + 当此控制开启时,将耳机视为线路输出插孔。也就是说,耳机不会自动静音其他 > + 线路输出,没有耳机放大器被设置到引脚上。 > + > +麦克风插口模式、线路插孔模式等 > + 这些枚举控制输入插孔引脚的方向和偏置。根据插孔类型,它可以设置为”麦克风 > + 输入“和”线路输入“以确定输入偏置,或者当引脚是环绕声道的多I/O插孔时,它 > + 可以设置为”线路输出“。 > + > + > +威盛编解码器 > + > + > +智能5.1 > + 一个枚举控件,用于为环绕输出重新分配多个I/O插孔的任务。当它打开时,相应 > + 的输入插孔(通常是线路输入和麦克风输入)被切换为环绕和中央低频输出插孔。 > + > +独立耳机 > + 启用此枚举控制时,耳机输出从单个流(第三个PCM,如hw:0,2)而不是主流路由。 > + 如果耳机DAC与侧边或中央低频通道DAC共享,则DAC将自动切换到耳机。 > + > +环回混合 > + 一个用于确定是否启动了模拟环回路由的枚举控件。当它启用后,模拟环回路由到 > + 前置通道。同样,耳机与扬声器输出也采用相同的路径。作为一个副作用,当设置 > + 此模式后,单个音量控制将不再适用于耳机和扬声器,因为只有一个DAC连接到混 > + 音器小部件。 > + > +动态电源控制 > + 此控件决定是否启动每个插孔的动态电源控制检测。启用时,根据插孔的插入情况 > + 动态更改组件的电源状态(D0/D3)以节省电量消耗。但是,如果您的系统没有提 > + 供正确的插孔检测,这将无法工作;在这种情况下,请关闭此控件。 > + > +插孔检测 > + 此控件仅为VT1708编解码器提供,它不会为每个插孔插拔提供适当的未请求事件。 > + 当此控件打开,驱动将轮询插孔检测,以便耳机自动静音可以工作,而关闭此控 > + 件将降低功耗。 > + > + > +科胜讯编解码器 > +-- > + > +自动静音模式 > + 见瑞昱解码器 > + > + > + > +模拟编解码器 > + > + > +通道模式 > + 这是一个用于更改环绕声道设置的枚举控件,仅在环绕声道可用时显示。它提供了能 > + 被使用的通道数:”2ch“、”4ch“和”6ch“。根据配置,这还控制多I/O插孔的插孔重 > + 分配。 > + > +独立耳机 > + 启动此枚举控制后,耳机输出从单个流(第三个PCM,如hw:0,2)而不是主流路由。 > diff --git a/Documentation/translations/zh_CN/sound/hd-audio/index.rst > b/Documentation/translations/zh_CN/sound/hd-audio/index.rst > new file mode 100644 > index ..c287aad51066 > --- /dev/null > +++ b/Documentation/translations/zh_CN/sound/hd-audio/index.rst > @@ -0,0 +1,17 @@ > +.. include:: ../../disclaimer-zh_CN.rst > + > +:Original: :doc:`../../../../sound/hd-audio/index` > +:Translator: Huang Jianghui > + > + > +高清音频 > + > + > +.. toctree:: > + :maxdepth: 2 > + > + notes > + models > + controls > + dp-mst > + realtek-pc-beep > diff --git a/Documentation/translations/zh_CN/sound/index.rst > b/Documentation/translations/zh_CN/sound/index.rst > new file mode 100644 > index ..42d86b361e42 > --- /dev/null > +++ b/Documentation/translations/zh_CN/sound/index.rst > @@ -0,0 +1,26 @@ > +.. include:: ../disclaimer-zh_CN.rst > + > +:Original:
[PATCH] PATCH Documentation translations:translate sound/hd-audio/controls to chinese
Signed-off-by: hjh --- Documentation/translations/zh_CN/index.rst| 1 + .../zh_CN/sound/hd-audio/controls.rst | 109 ++ .../zh_CN/sound/hd-audio/index.rst| 17 +++ .../translations/zh_CN/sound/index.rst| 26 + 4 files changed, 153 insertions(+) create mode 100644 Documentation/translations/zh_CN/sound/hd-audio/controls.rst create mode 100644 Documentation/translations/zh_CN/sound/hd-audio/index.rst create mode 100644 Documentation/translations/zh_CN/sound/index.rst diff --git a/Documentation/translations/zh_CN/index.rst b/Documentation/translations/zh_CN/index.rst index be6f11176200..2767dacfe86d 100644 --- a/Documentation/translations/zh_CN/index.rst +++ b/Documentation/translations/zh_CN/index.rst @@ -20,6 +20,7 @@ process/index filesystems/index arm64/index + sound/index 目录和表格 -- diff --git a/Documentation/translations/zh_CN/sound/hd-audio/controls.rst b/Documentation/translations/zh_CN/sound/hd-audio/controls.rst new file mode 100644 index ..662bacc5a45f --- /dev/null +++ b/Documentation/translations/zh_CN/sound/hd-audio/controls.rst @@ -0,0 +1,109 @@ +.. SPDX-License-Identifier: GPL-2.0 +Chinese translated version of Documentation/sound/hd-audio/controls.rst + +If you have any comment or update to the content, please contact the +original document maintainer directly. However, if you have a problem +communicating in English you can also ask the Chinese maintainer for +help. Contact the Chinese maintainer if this translation is outdated +or if there is a problem with the translation. + +Chinese maintainer: Huang Jianghui +- +.. include:: ../../disclaimer-zh_CN.rst +以下为正文 +- +== +高清音频编解码器特定混音器控件 +== + + +此文件解释特定于编解码器的混音器控件. + +瑞昱编解码器 + + +声道模式 + 这是一个用于更改环绕声道设置的枚举控件,仅在环绕声道打开时显示出现。 + 它给出要使用的通道数:"2ch","4ch","6ch",和"8ch"。根据配置,这还控 + 制多I/O插孔的插孔重分配。 + +自动静音模式 + 这是一个枚举控件,用于更改耳机和线路输出插孔的自动静音行为。如果内 + 置扬声器、耳机和/或线路输出插孔在机器上可用,则显示该控件。当只有 + 耳机或者线路输出的时候,它给出”禁用“和”启用“状态。当启用后,插孔插 + 入后扬声器会自动静音。 + + 当耳机和线路输出插孔都存在时,它给出”禁用“、”仅扬声器“和”线路输出+扬 + 声器“。当”仅扬声器“被选择,插入耳机或者线路输出插孔可使扬声器静音, + 但不会使线路输出静音。当线路输出+扬声器被选择,插入耳机插孔会同时使扬 + 声器和线路输出静音。 + + +矽玛特编解码器 +-- + +模拟环回 + 此控件启用/禁用模拟环回电路。只有在编解码器提示中将”lookback“设置为真 + 时才会出现(见HD-Audio.txt)。请注意,在某些编解码器上,模拟环回和正常 + PCM播放是独占的,即当此选项打开时,您将听不到任何PCM流。 + +交换中置/低频 + 交换中置和低频通道顺序,通常情况下,左侧对应中置,右侧对应低频,启动此 + 项后,左边低频,右边中置。 + +耳机作为线路输出 + 当此控制开启时,将耳机视为线路输出插孔。也就是说,耳机不会自动静音其他 + 线路输出,没有耳机放大器被设置到引脚上。 + +麦克风插口模式、线路插孔模式等 + 这些枚举控制输入插孔引脚的方向和偏置。根据插孔类型,它可以设置为”麦克风 + 输入“和”线路输入“以确定输入偏置,或者当引脚是环绕声道的多I/O插孔时,它 + 可以设置为”线路输出“。 + + +威盛编解码器 + + +智能5.1 + 一个枚举控件,用于为环绕输出重新分配多个I/O插孔的任务。当它打开时,相应 + 的输入插孔(通常是线路输入和麦克风输入)被切换为环绕和中央低频输出插孔。 + +独立耳机 + 启用此枚举控制时,耳机输出从单个流(第三个PCM,如hw:0,2)而不是主流路由。 + 如果耳机DAC与侧边或中央低频通道DAC共享,则DAC将自动切换到耳机。 + +环回混合 + 一个用于确定是否启动了模拟环回路由的枚举控件。当它启用后,模拟环回路由到 + 前置通道。同样,耳机与扬声器输出也采用相同的路径。作为一个副作用,当设置 + 此模式后,单个音量控制将不再适用于耳机和扬声器,因为只有一个DAC连接到混 + 音器小部件。 + +动态电源控制 + 此控件决定是否启动每个插孔的动态电源控制检测。启用时,根据插孔的插入情况 + 动态更改组件的电源状态(D0/D3)以节省电量消耗。但是,如果您的系统没有提 + 供正确的插孔检测,这将无法工作;在这种情况下,请关闭此控件。 + +插孔检测 + 此控件仅为VT1708编解码器提供,它不会为每个插孔插拔提供适当的未请求事件。 + 当此控件打开,驱动将轮询插孔检测,以便耳机自动静音可以工作,而关闭此控 + 件将降低功耗。 + + +科胜讯编解码器 +-- + +自动静音模式 + 见瑞昱解码器 + + + +模拟编解码器 + + +通道模式 + 这是一个用于更改环绕声道设置的枚举控件,仅在环绕声道可用时显示。它提供了能 + 被使用的通道数:”2ch“、”4ch“和”6ch“。根据配置,这还控制多I/O插孔的插孔重 + 分配。 + +独立耳机 + 启动此枚举控制后,耳机输出从单个流(第三个PCM,如hw:0,2)而不是主流路由。 diff --git a/Documentation/translations/zh_CN/sound/hd-audio/index.rst b/Documentation/translations/zh_CN/sound/hd-audio/index.rst new file mode 100644 index ..c287aad51066 --- /dev/null +++ b/Documentation/translations/zh_CN/sound/hd-audio/index.rst @@ -0,0 +1,17 @@ +.. include:: ../../disclaimer-zh_CN.rst + +:Original: :doc:`../../../../sound/hd-audio/index` +:Translator: Huang Jianghui + + +高清音频 + + +.. toctree:: + :maxdepth: 2 + + notes + models + controls + dp-mst + realtek-pc-beep diff --git a/Documentation/translations/zh_CN/sound/index.rst b/Documentation/translations/zh_CN/sound/index.rst new file mode 100644 index ..42d86b361e42 --- /dev/null +++ b/Documentation/translations/zh_CN/sound/index.rst @@ -0,0 +1,26 @@ +.. include:: ../disclaimer-zh_CN.rst + +:Original: :doc:`../../../sound/index` +:Translator: Huang Jianghui + + + +Linux 声音子系统文档 + + +.. toctree:: + :maxdepth: 2 + + kernel-api/index + designs/index + soc/index + alsa-configuration + hd-audio/index + cards/index + +.. only:: subproject and html + + Indices + === + + * :ref:`genindex` -- 2.20.1