Re: [PATCH 0/3] spi-nor: Add Octal SPI support
On Sun, 9 Dec 2018 14:17:18 +0530 Vignesh R wrote: > Hi Boris, > > On 03/10/18 10:26 PM, Vignesh R wrote: > > This series adds support for octal mode of mt35x flash. Also, adds > > support for OSPI version of Cadence QSPI controller. > > > > Based on top of patches adding basic support for mt35xu512aba here: > > https://patchwork.ozlabs.org/cover/971437/ > > > > Vignesh R (3): > > mtd: spi-nor: Add Octal mode support for mt35xu512aba > > > > dt-bindings: cadence-quadspi: Add new compatible for AM654 SoC > > mtd: spi-nor: cadence-quadspi: Add support for Octal SPI controller > > Could you consider above two patches for v4.21 once [1][2] are merged? > > [1] https://patchwork.ozlabs.org/patch/1006717/ > [2] https://patchwork.ozlabs.org/patch/1006715/ I asked Tudor to have a look at those patches. I'll apply them once I have his R-b. > > Let me know if this needs to be re-posted. > > > > > .../devicetree/bindings/mtd/cadence-quadspi.txt | 1 + > > drivers/mtd/spi-nor/cadence-quadspi.c | 9 + > > drivers/mtd/spi-nor/spi-nor.c | 11 ++- > > include/linux/mtd/spi-nor.h | 2 ++ > > 4 files changed, 22 insertions(+), 1 deletion(-) > > >
Re: [PATCH 0/3] spi-nor: Add Octal SPI support
Hi Boris, On 03/10/18 10:26 PM, Vignesh R wrote: > This series adds support for octal mode of mt35x flash. Also, adds > support for OSPI version of Cadence QSPI controller. > > Based on top of patches adding basic support for mt35xu512aba here: > https://patchwork.ozlabs.org/cover/971437/ > > Vignesh R (3): > mtd: spi-nor: Add Octal mode support for mt35xu512aba > dt-bindings: cadence-quadspi: Add new compatible for AM654 SoC > mtd: spi-nor: cadence-quadspi: Add support for Octal SPI controller Could you consider above two patches for v4.21 once [1][2] are merged? [1] https://patchwork.ozlabs.org/patch/1006717/ [2] https://patchwork.ozlabs.org/patch/1006715/ Let me know if this needs to be re-posted. > > .../devicetree/bindings/mtd/cadence-quadspi.txt | 1 + > drivers/mtd/spi-nor/cadence-quadspi.c | 9 + > drivers/mtd/spi-nor/spi-nor.c | 11 ++- > include/linux/mtd/spi-nor.h | 2 ++ > 4 files changed, 22 insertions(+), 1 deletion(-) > -- Regards Vignesh
Re: [PATCH 0/3] spi-nor: Add Octal SPI support
Hi Vignesh, On Mon, 8 Oct 2018 21:06:02 +0530 Vignesh R wrote: > Hi Boris, > > Sorry I missed this mail. > > On Thursday 04 October 2018 04:47 PM, Boris Brezillon wrote: > > On Thu, 4 Oct 2018 16:05:36 +0530 > > Vignesh R wrote: > > > > .../devicetree/bindings/mtd/cadence-quadspi.txt | 1 + > drivers/mtd/spi-nor/cadence-quadspi.c | 9 + > >>> > >>> On a slightly different topic, do you plan to convert the Cadence > >>> driver to spi-mem? And if you don't, is it because you don't have time > >>> or because some features are missing in spi-mem (I remember you > >>> mentioned a few things back when you were reviewing the spi-mem series)? > >>> > >> > >> I do not have plans to convert cadence QSPI driver to spi-mem yet, > >> mainly due to lack of time. Also, not sure if original author Marek and > >> other altera people are okay with that. > >> > >> I see couple of issues in the way of conversion: > >> 1. I would wait to know what direction would direct mapping APIs[1] go > >> before starting spi-mem conversion for Cadence QSPI driver. Else, we > >> have may to re write again if direct mapping APIs are merged. > > > > I'd suggest reviewing the proposal I posted so that you can influence > > the design of this new API ;-). > > > > I did take a look and proposal seems fine. Will try to prototype and > test cadence QSPI driver with these. Thanks for the patches! That's great news! Let me know how it goes, and don't hesitate to ask if you have any questions. > > > >> 2. New Cadence OSPI IP has an integrated PHY to support high throughput > >> OSPI flashes operating up 200MHz in Octal DDR mode. In order to work > >> with such flashes, PHY DLLs need to be calibrated. Highly simplified > >> calibration sequence is as below(See [2] for actual sequence): > >> -Read flash ID at low speed and store it. > >> -Enable PHY and set DLLs to a defined initial value > >> -Increment RX DLL value > >> -Read flash ID and check for correctness of data read > >> -repeat above two steps until a band of passing values is obtained for > >> RX DLL where flash ID is correctly read. > >> -DLL needs to set to middle of the passing band. > > > > Is the Read ID operation hardcoded or do you just use it as a way to > > trigger predictable transfers on the IO bus? > > > > Just a way to trigger predictable data reads. Good. > > >> > >> I am trying to figure out how to fit this into the spi-mem framework as > >> controller would to need to store READ ID opcode and expected JEDEC ID > >> before starting calibration sequence. > > > > I think this should be split in 2: > > > > - the SPI NOR framework passing the operation to use to do the > > calibration (here a READ ID) > > - the SPI controller framework replaying the same operation with > > different DLL configs until it finds the best match > > > > So, it would basically be added as a new hook: > > > > int (*calibrate)(struct spi_mem *mem, > > const struct spi_mem_op *tmpl); > > > > and a new function provided by the spi-mem API > > > > int spi_mem_calibrate(struct spi_mem *mem, > > const struct spi_mem_op *tmpl); > > > > and calibration outcome would be somehow attached to the spi_mem > > object. > > > > This way we stay memory agnostic but still provide the necessary blocks > > at the spi-mem level to do such callibrations. > > > > Would that work? > > > > That would work and hopefully is not intrusive to spi-mem framework. > Okay. Don't hesitate to post a proposal along those lines and I'll try to review it. Thanks, Boris
Re: [PATCH 0/3] spi-nor: Add Octal SPI support
Hi Vignesh, On Mon, 8 Oct 2018 21:06:02 +0530 Vignesh R wrote: > Hi Boris, > > Sorry I missed this mail. > > On Thursday 04 October 2018 04:47 PM, Boris Brezillon wrote: > > On Thu, 4 Oct 2018 16:05:36 +0530 > > Vignesh R wrote: > > > > .../devicetree/bindings/mtd/cadence-quadspi.txt | 1 + > drivers/mtd/spi-nor/cadence-quadspi.c | 9 + > >>> > >>> On a slightly different topic, do you plan to convert the Cadence > >>> driver to spi-mem? And if you don't, is it because you don't have time > >>> or because some features are missing in spi-mem (I remember you > >>> mentioned a few things back when you were reviewing the spi-mem series)? > >>> > >> > >> I do not have plans to convert cadence QSPI driver to spi-mem yet, > >> mainly due to lack of time. Also, not sure if original author Marek and > >> other altera people are okay with that. > >> > >> I see couple of issues in the way of conversion: > >> 1. I would wait to know what direction would direct mapping APIs[1] go > >> before starting spi-mem conversion for Cadence QSPI driver. Else, we > >> have may to re write again if direct mapping APIs are merged. > > > > I'd suggest reviewing the proposal I posted so that you can influence > > the design of this new API ;-). > > > > I did take a look and proposal seems fine. Will try to prototype and > test cadence QSPI driver with these. Thanks for the patches! That's great news! Let me know how it goes, and don't hesitate to ask if you have any questions. > > > >> 2. New Cadence OSPI IP has an integrated PHY to support high throughput > >> OSPI flashes operating up 200MHz in Octal DDR mode. In order to work > >> with such flashes, PHY DLLs need to be calibrated. Highly simplified > >> calibration sequence is as below(See [2] for actual sequence): > >> -Read flash ID at low speed and store it. > >> -Enable PHY and set DLLs to a defined initial value > >> -Increment RX DLL value > >> -Read flash ID and check for correctness of data read > >> -repeat above two steps until a band of passing values is obtained for > >> RX DLL where flash ID is correctly read. > >> -DLL needs to set to middle of the passing band. > > > > Is the Read ID operation hardcoded or do you just use it as a way to > > trigger predictable transfers on the IO bus? > > > > Just a way to trigger predictable data reads. Good. > > >> > >> I am trying to figure out how to fit this into the spi-mem framework as > >> controller would to need to store READ ID opcode and expected JEDEC ID > >> before starting calibration sequence. > > > > I think this should be split in 2: > > > > - the SPI NOR framework passing the operation to use to do the > > calibration (here a READ ID) > > - the SPI controller framework replaying the same operation with > > different DLL configs until it finds the best match > > > > So, it would basically be added as a new hook: > > > > int (*calibrate)(struct spi_mem *mem, > > const struct spi_mem_op *tmpl); > > > > and a new function provided by the spi-mem API > > > > int spi_mem_calibrate(struct spi_mem *mem, > > const struct spi_mem_op *tmpl); > > > > and calibration outcome would be somehow attached to the spi_mem > > object. > > > > This way we stay memory agnostic but still provide the necessary blocks > > at the spi-mem level to do such callibrations. > > > > Would that work? > > > > That would work and hopefully is not intrusive to spi-mem framework. > Okay. Don't hesitate to post a proposal along those lines and I'll try to review it. Thanks, Boris
Re: [PATCH 0/3] spi-nor: Add Octal SPI support
Hi Boris, Sorry I missed this mail. On Thursday 04 October 2018 04:47 PM, Boris Brezillon wrote: > On Thu, 4 Oct 2018 16:05:36 +0530 > Vignesh R wrote: > .../devicetree/bindings/mtd/cadence-quadspi.txt | 1 + drivers/mtd/spi-nor/cadence-quadspi.c | 9 + >>> >>> On a slightly different topic, do you plan to convert the Cadence >>> driver to spi-mem? And if you don't, is it because you don't have time >>> or because some features are missing in spi-mem (I remember you >>> mentioned a few things back when you were reviewing the spi-mem series)? >>> >> >> I do not have plans to convert cadence QSPI driver to spi-mem yet, >> mainly due to lack of time. Also, not sure if original author Marek and >> other altera people are okay with that. >> >> I see couple of issues in the way of conversion: >> 1. I would wait to know what direction would direct mapping APIs[1] go >> before starting spi-mem conversion for Cadence QSPI driver. Else, we >> have may to re write again if direct mapping APIs are merged. > > I'd suggest reviewing the proposal I posted so that you can influence > the design of this new API ;-). > I did take a look and proposal seems fine. Will try to prototype and test cadence QSPI driver with these. Thanks for the patches! >> 2. New Cadence OSPI IP has an integrated PHY to support high throughput >> OSPI flashes operating up 200MHz in Octal DDR mode. In order to work >> with such flashes, PHY DLLs need to be calibrated. Highly simplified >> calibration sequence is as below(See [2] for actual sequence): >> -Read flash ID at low speed and store it. >> -Enable PHY and set DLLs to a defined initial value >> -Increment RX DLL value >> -Read flash ID and check for correctness of data read >> -repeat above two steps until a band of passing values is obtained for >> RX DLL where flash ID is correctly read. >> -DLL needs to set to middle of the passing band. > > Is the Read ID operation hardcoded or do you just use it as a way to > trigger predictable transfers on the IO bus? > Just a way to trigger predictable data reads. >> >> I am trying to figure out how to fit this into the spi-mem framework as >> controller would to need to store READ ID opcode and expected JEDEC ID >> before starting calibration sequence. > > I think this should be split in 2: > > - the SPI NOR framework passing the operation to use to do the > calibration (here a READ ID) > - the SPI controller framework replaying the same operation with > different DLL configs until it finds the best match > > So, it would basically be added as a new hook: > > int (*calibrate)(struct spi_mem *mem, >const struct spi_mem_op *tmpl); > > and a new function provided by the spi-mem API > > int spi_mem_calibrate(struct spi_mem *mem, > const struct spi_mem_op *tmpl); > > and calibration outcome would be somehow attached to the spi_mem > object. > > This way we stay memory agnostic but still provide the necessary blocks > at the spi-mem level to do such callibrations. > > Would that work? > That would work and hopefully is not intrusive to spi-mem framework. -- Regards Vignesh
Re: [PATCH 0/3] spi-nor: Add Octal SPI support
Hi Boris, Sorry I missed this mail. On Thursday 04 October 2018 04:47 PM, Boris Brezillon wrote: > On Thu, 4 Oct 2018 16:05:36 +0530 > Vignesh R wrote: > .../devicetree/bindings/mtd/cadence-quadspi.txt | 1 + drivers/mtd/spi-nor/cadence-quadspi.c | 9 + >>> >>> On a slightly different topic, do you plan to convert the Cadence >>> driver to spi-mem? And if you don't, is it because you don't have time >>> or because some features are missing in spi-mem (I remember you >>> mentioned a few things back when you were reviewing the spi-mem series)? >>> >> >> I do not have plans to convert cadence QSPI driver to spi-mem yet, >> mainly due to lack of time. Also, not sure if original author Marek and >> other altera people are okay with that. >> >> I see couple of issues in the way of conversion: >> 1. I would wait to know what direction would direct mapping APIs[1] go >> before starting spi-mem conversion for Cadence QSPI driver. Else, we >> have may to re write again if direct mapping APIs are merged. > > I'd suggest reviewing the proposal I posted so that you can influence > the design of this new API ;-). > I did take a look and proposal seems fine. Will try to prototype and test cadence QSPI driver with these. Thanks for the patches! >> 2. New Cadence OSPI IP has an integrated PHY to support high throughput >> OSPI flashes operating up 200MHz in Octal DDR mode. In order to work >> with such flashes, PHY DLLs need to be calibrated. Highly simplified >> calibration sequence is as below(See [2] for actual sequence): >> -Read flash ID at low speed and store it. >> -Enable PHY and set DLLs to a defined initial value >> -Increment RX DLL value >> -Read flash ID and check for correctness of data read >> -repeat above two steps until a band of passing values is obtained for >> RX DLL where flash ID is correctly read. >> -DLL needs to set to middle of the passing band. > > Is the Read ID operation hardcoded or do you just use it as a way to > trigger predictable transfers on the IO bus? > Just a way to trigger predictable data reads. >> >> I am trying to figure out how to fit this into the spi-mem framework as >> controller would to need to store READ ID opcode and expected JEDEC ID >> before starting calibration sequence. > > I think this should be split in 2: > > - the SPI NOR framework passing the operation to use to do the > calibration (here a READ ID) > - the SPI controller framework replaying the same operation with > different DLL configs until it finds the best match > > So, it would basically be added as a new hook: > > int (*calibrate)(struct spi_mem *mem, >const struct spi_mem_op *tmpl); > > and a new function provided by the spi-mem API > > int spi_mem_calibrate(struct spi_mem *mem, > const struct spi_mem_op *tmpl); > > and calibration outcome would be somehow attached to the spi_mem > object. > > This way we stay memory agnostic but still provide the necessary blocks > at the spi-mem level to do such callibrations. > > Would that work? > That would work and hopefully is not intrusive to spi-mem framework. -- Regards Vignesh
Re: [PATCH 0/3] spi-nor: Add Octal SPI support
On Thu, 4 Oct 2018 16:05:36 +0530 Vignesh R wrote: > >> > >> .../devicetree/bindings/mtd/cadence-quadspi.txt | 1 + > >> drivers/mtd/spi-nor/cadence-quadspi.c | 9 + > > > > On a slightly different topic, do you plan to convert the Cadence > > driver to spi-mem? And if you don't, is it because you don't have time > > or because some features are missing in spi-mem (I remember you > > mentioned a few things back when you were reviewing the spi-mem series)? > > > > I do not have plans to convert cadence QSPI driver to spi-mem yet, > mainly due to lack of time. Also, not sure if original author Marek and > other altera people are okay with that. > > I see couple of issues in the way of conversion: > 1. I would wait to know what direction would direct mapping APIs[1] go > before starting spi-mem conversion for Cadence QSPI driver. Else, we > have may to re write again if direct mapping APIs are merged. I'd suggest reviewing the proposal I posted so that you can influence the design of this new API ;-). > 2. New Cadence OSPI IP has an integrated PHY to support high throughput > OSPI flashes operating up 200MHz in Octal DDR mode. In order to work > with such flashes, PHY DLLs need to be calibrated. Highly simplified > calibration sequence is as below(See [2] for actual sequence): > -Read flash ID at low speed and store it. > -Enable PHY and set DLLs to a defined initial value > -Increment RX DLL value > -Read flash ID and check for correctness of data read > -repeat above two steps until a band of passing values is obtained for > RX DLL where flash ID is correctly read. > -DLL needs to set to middle of the passing band. Is the Read ID operation hardcoded or do you just use it as a way to trigger predictable transfers on the IO bus? > > I am trying to figure out how to fit this into the spi-mem framework as > controller would to need to store READ ID opcode and expected JEDEC ID > before starting calibration sequence. I think this should be split in 2: - the SPI NOR framework passing the operation to use to do the calibration (here a READ ID) - the SPI controller framework replaying the same operation with different DLL configs until it finds the best match So, it would basically be added as a new hook: int (*calibrate)(struct spi_mem *mem, const struct spi_mem_op *tmpl); and a new function provided by the spi-mem API int spi_mem_calibrate(struct spi_mem *mem, const struct spi_mem_op *tmpl); and calibration outcome would be somehow attached to the spi_mem object. This way we stay memory agnostic but still provide the necessary blocks at the spi-mem level to do such callibrations. Would that work?
Re: [PATCH 0/3] spi-nor: Add Octal SPI support
On Thu, 4 Oct 2018 16:05:36 +0530 Vignesh R wrote: > >> > >> .../devicetree/bindings/mtd/cadence-quadspi.txt | 1 + > >> drivers/mtd/spi-nor/cadence-quadspi.c | 9 + > > > > On a slightly different topic, do you plan to convert the Cadence > > driver to spi-mem? And if you don't, is it because you don't have time > > or because some features are missing in spi-mem (I remember you > > mentioned a few things back when you were reviewing the spi-mem series)? > > > > I do not have plans to convert cadence QSPI driver to spi-mem yet, > mainly due to lack of time. Also, not sure if original author Marek and > other altera people are okay with that. > > I see couple of issues in the way of conversion: > 1. I would wait to know what direction would direct mapping APIs[1] go > before starting spi-mem conversion for Cadence QSPI driver. Else, we > have may to re write again if direct mapping APIs are merged. I'd suggest reviewing the proposal I posted so that you can influence the design of this new API ;-). > 2. New Cadence OSPI IP has an integrated PHY to support high throughput > OSPI flashes operating up 200MHz in Octal DDR mode. In order to work > with such flashes, PHY DLLs need to be calibrated. Highly simplified > calibration sequence is as below(See [2] for actual sequence): > -Read flash ID at low speed and store it. > -Enable PHY and set DLLs to a defined initial value > -Increment RX DLL value > -Read flash ID and check for correctness of data read > -repeat above two steps until a band of passing values is obtained for > RX DLL where flash ID is correctly read. > -DLL needs to set to middle of the passing band. Is the Read ID operation hardcoded or do you just use it as a way to trigger predictable transfers on the IO bus? > > I am trying to figure out how to fit this into the spi-mem framework as > controller would to need to store READ ID opcode and expected JEDEC ID > before starting calibration sequence. I think this should be split in 2: - the SPI NOR framework passing the operation to use to do the calibration (here a READ ID) - the SPI controller framework replaying the same operation with different DLL configs until it finds the best match So, it would basically be added as a new hook: int (*calibrate)(struct spi_mem *mem, const struct spi_mem_op *tmpl); and a new function provided by the spi-mem API int spi_mem_calibrate(struct spi_mem *mem, const struct spi_mem_op *tmpl); and calibration outcome would be somehow attached to the spi_mem object. This way we stay memory agnostic but still provide the necessary blocks at the spi-mem level to do such callibrations. Would that work?
Re: [PATCH 0/3] spi-nor: Add Octal SPI support
On Thursday 04 October 2018 12:50 AM, Boris Brezillon wrote: > On Wed, 3 Oct 2018 22:26:00 +0530 > Vignesh R wrote: > >> This series adds support for octal mode of mt35x flash. Also, adds >> support for OSPI version of Cadence QSPI controller. >> >> Based on top of patches adding basic support for mt35xu512aba here: >> https://patchwork.ozlabs.org/cover/971437/ >> >> Vignesh R (3): >> mtd: spi-nor: Add Octal mode support for mt35xu512aba >> dt-bindings: cadence-quadspi: Add new compatible for AM654 SoC >> mtd: spi-nor: cadence-quadspi: Add support for Octal SPI controller > > The patchset looks good to me, I'll just wait the next release cycle > before applying it, since I'd prefer to have it stay a bit longer in > -next. This should leave enough time to let other people review this > stuff. > Ok, thats fine... >> >> .../devicetree/bindings/mtd/cadence-quadspi.txt | 1 + >> drivers/mtd/spi-nor/cadence-quadspi.c | 9 + > > On a slightly different topic, do you plan to convert the Cadence > driver to spi-mem? And if you don't, is it because you don't have time > or because some features are missing in spi-mem (I remember you > mentioned a few things back when you were reviewing the spi-mem series)? > I do not have plans to convert cadence QSPI driver to spi-mem yet, mainly due to lack of time. Also, not sure if original author Marek and other altera people are okay with that. I see couple of issues in the way of conversion: 1. I would wait to know what direction would direct mapping APIs[1] go before starting spi-mem conversion for Cadence QSPI driver. Else, we have may to re write again if direct mapping APIs are merged. 2. New Cadence OSPI IP has an integrated PHY to support high throughput OSPI flashes operating up 200MHz in Octal DDR mode. In order to work with such flashes, PHY DLLs need to be calibrated. Highly simplified calibration sequence is as below(See [2] for actual sequence): -Read flash ID at low speed and store it. -Enable PHY and set DLLs to a defined initial value -Increment RX DLL value -Read flash ID and check for correctness of data read -repeat above two steps until a band of passing values is obtained for RX DLL where flash ID is correctly read. -DLL needs to set to middle of the passing band. I am trying to figure out how to fit this into the spi-mem framework as controller would to need to store READ ID opcode and expected JEDEC ID before starting calibration sequence. [1]https://patchwork.ozlabs.org/cover/924041/ [2]http://www.ti.com/lit/ug/spruid7a/spruid7a.pdf(12.3.2.4.14 PHY Module page 9770-9772) -- Regards Vignesh
Re: [PATCH 0/3] spi-nor: Add Octal SPI support
On Thursday 04 October 2018 12:50 AM, Boris Brezillon wrote: > On Wed, 3 Oct 2018 22:26:00 +0530 > Vignesh R wrote: > >> This series adds support for octal mode of mt35x flash. Also, adds >> support for OSPI version of Cadence QSPI controller. >> >> Based on top of patches adding basic support for mt35xu512aba here: >> https://patchwork.ozlabs.org/cover/971437/ >> >> Vignesh R (3): >> mtd: spi-nor: Add Octal mode support for mt35xu512aba >> dt-bindings: cadence-quadspi: Add new compatible for AM654 SoC >> mtd: spi-nor: cadence-quadspi: Add support for Octal SPI controller > > The patchset looks good to me, I'll just wait the next release cycle > before applying it, since I'd prefer to have it stay a bit longer in > -next. This should leave enough time to let other people review this > stuff. > Ok, thats fine... >> >> .../devicetree/bindings/mtd/cadence-quadspi.txt | 1 + >> drivers/mtd/spi-nor/cadence-quadspi.c | 9 + > > On a slightly different topic, do you plan to convert the Cadence > driver to spi-mem? And if you don't, is it because you don't have time > or because some features are missing in spi-mem (I remember you > mentioned a few things back when you were reviewing the spi-mem series)? > I do not have plans to convert cadence QSPI driver to spi-mem yet, mainly due to lack of time. Also, not sure if original author Marek and other altera people are okay with that. I see couple of issues in the way of conversion: 1. I would wait to know what direction would direct mapping APIs[1] go before starting spi-mem conversion for Cadence QSPI driver. Else, we have may to re write again if direct mapping APIs are merged. 2. New Cadence OSPI IP has an integrated PHY to support high throughput OSPI flashes operating up 200MHz in Octal DDR mode. In order to work with such flashes, PHY DLLs need to be calibrated. Highly simplified calibration sequence is as below(See [2] for actual sequence): -Read flash ID at low speed and store it. -Enable PHY and set DLLs to a defined initial value -Increment RX DLL value -Read flash ID and check for correctness of data read -repeat above two steps until a band of passing values is obtained for RX DLL where flash ID is correctly read. -DLL needs to set to middle of the passing band. I am trying to figure out how to fit this into the spi-mem framework as controller would to need to store READ ID opcode and expected JEDEC ID before starting calibration sequence. [1]https://patchwork.ozlabs.org/cover/924041/ [2]http://www.ti.com/lit/ug/spruid7a/spruid7a.pdf(12.3.2.4.14 PHY Module page 9770-9772) -- Regards Vignesh
Re: [PATCH 0/3] spi-nor: Add Octal SPI support
On Wed, 3 Oct 2018 22:26:00 +0530 Vignesh R wrote: > This series adds support for octal mode of mt35x flash. Also, adds > support for OSPI version of Cadence QSPI controller. > > Based on top of patches adding basic support for mt35xu512aba here: > https://patchwork.ozlabs.org/cover/971437/ > > Vignesh R (3): > mtd: spi-nor: Add Octal mode support for mt35xu512aba > dt-bindings: cadence-quadspi: Add new compatible for AM654 SoC > mtd: spi-nor: cadence-quadspi: Add support for Octal SPI controller The patchset looks good to me, I'll just wait the next release cycle before applying it, since I'd prefer to have it stay a bit longer in -next. This should leave enough time to let other people review this stuff. > > .../devicetree/bindings/mtd/cadence-quadspi.txt | 1 + > drivers/mtd/spi-nor/cadence-quadspi.c | 9 + On a slightly different topic, do you plan to convert the Cadence driver to spi-mem? And if you don't, is it because you don't have time or because some features are missing in spi-mem (I remember you mentioned a few things back when you were reviewing the spi-mem series)? > drivers/mtd/spi-nor/spi-nor.c | 11 ++- > include/linux/mtd/spi-nor.h | 2 ++ > 4 files changed, 22 insertions(+), 1 deletion(-) >
Re: [PATCH 0/3] spi-nor: Add Octal SPI support
On Wed, 3 Oct 2018 22:26:00 +0530 Vignesh R wrote: > This series adds support for octal mode of mt35x flash. Also, adds > support for OSPI version of Cadence QSPI controller. > > Based on top of patches adding basic support for mt35xu512aba here: > https://patchwork.ozlabs.org/cover/971437/ > > Vignesh R (3): > mtd: spi-nor: Add Octal mode support for mt35xu512aba > dt-bindings: cadence-quadspi: Add new compatible for AM654 SoC > mtd: spi-nor: cadence-quadspi: Add support for Octal SPI controller The patchset looks good to me, I'll just wait the next release cycle before applying it, since I'd prefer to have it stay a bit longer in -next. This should leave enough time to let other people review this stuff. > > .../devicetree/bindings/mtd/cadence-quadspi.txt | 1 + > drivers/mtd/spi-nor/cadence-quadspi.c | 9 + On a slightly different topic, do you plan to convert the Cadence driver to spi-mem? And if you don't, is it because you don't have time or because some features are missing in spi-mem (I remember you mentioned a few things back when you were reviewing the spi-mem series)? > drivers/mtd/spi-nor/spi-nor.c | 11 ++- > include/linux/mtd/spi-nor.h | 2 ++ > 4 files changed, 22 insertions(+), 1 deletion(-) >
[PATCH 0/3] spi-nor: Add Octal SPI support
This series adds support for octal mode of mt35x flash. Also, adds support for OSPI version of Cadence QSPI controller. Based on top of patches adding basic support for mt35xu512aba here: https://patchwork.ozlabs.org/cover/971437/ Vignesh R (3): mtd: spi-nor: Add Octal mode support for mt35xu512aba dt-bindings: cadence-quadspi: Add new compatible for AM654 SoC mtd: spi-nor: cadence-quadspi: Add support for Octal SPI controller .../devicetree/bindings/mtd/cadence-quadspi.txt | 1 + drivers/mtd/spi-nor/cadence-quadspi.c | 9 + drivers/mtd/spi-nor/spi-nor.c | 11 ++- include/linux/mtd/spi-nor.h | 2 ++ 4 files changed, 22 insertions(+), 1 deletion(-) -- 2.19.0
[PATCH 0/3] spi-nor: Add Octal SPI support
This series adds support for octal mode of mt35x flash. Also, adds support for OSPI version of Cadence QSPI controller. Based on top of patches adding basic support for mt35xu512aba here: https://patchwork.ozlabs.org/cover/971437/ Vignesh R (3): mtd: spi-nor: Add Octal mode support for mt35xu512aba dt-bindings: cadence-quadspi: Add new compatible for AM654 SoC mtd: spi-nor: cadence-quadspi: Add support for Octal SPI controller .../devicetree/bindings/mtd/cadence-quadspi.txt | 1 + drivers/mtd/spi-nor/cadence-quadspi.c | 9 + drivers/mtd/spi-nor/spi-nor.c | 11 ++- include/linux/mtd/spi-nor.h | 2 ++ 4 files changed, 22 insertions(+), 1 deletion(-) -- 2.19.0
