[PATCH 3/3] powerpc: convert config files to generic cmdline
This is a scripted mass convert of the config files to use the new generic cmdline. There is a bit of a trim effect here. It would seems that some of the config haven't been trimmed in a while. The script used to convert is as follows, if [[ -z "$1" || -z "$2" ]]; then echo "Two arguments are needed." exit 1 fi mkdir $1 cp $2 $1/.config sed -i 's/CONFIG_CMDLINE=/CONFIG_CMDLINE_PREPEND=/g' $1/.config make ARCH=$1 O=$1 olddefconfig make ARCH=$1 O=$1 savedefconfig cp $1/defconfig $2 rm -Rf $1 Cc: xe-linux-exter...@cisco.com Cc: Daniel Walker Signed-off-by: Daniel Walker --- arch/powerpc/configs/44x/fsp2_defconfig | 29 arch/powerpc/configs/44x/iss476-smp_defconfig | 24 +++--- arch/powerpc/configs/44x/warp_defconfig | 12 +++ arch/powerpc/configs/holly_defconfig | 12 +++ arch/powerpc/configs/mvme5100_defconfig | 25 +++--- arch/powerpc/configs/skiroot_defconfig| 48 +-- arch/powerpc/configs/storcenter_defconfig | 15 - 7 files changed, 80 insertions(+), 85 deletions(-) diff --git a/arch/powerpc/configs/44x/fsp2_defconfig b/arch/powerpc/configs/44x/fsp2_defconfig index bae6b26bcfba..bafea495c9b8 100644 --- a/arch/powerpc/configs/44x/fsp2_defconfig +++ b/arch/powerpc/configs/44x/fsp2_defconfig @@ -1,8 +1,6 @@ -CONFIG_44x=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y # CONFIG_CROSS_MEMORY_ATTACH is not set -# CONFIG_FHANDLE is not set CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y @@ -13,25 +11,26 @@ CONFIG_BLK_DEV_INITRD=y # CONFIG_RD_XZ is not set # CONFIG_RD_LZO is not set # CONFIG_RD_LZ4 is not set +# CONFIG_FHANDLE is not set CONFIG_KALLSYMS_ALL=y CONFIG_BPF_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE_PREPEND="ip=on rw" +CONFIG_44x=y CONFIG_PPC_47x=y # CONFIG_EBONY is not set CONFIG_FSP2=y CONFIG_476FPE_ERR46=y -CONFIG_SWIOTLB=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="ip=on rw" # CONFIG_SUSPEND is not set # CONFIG_PCI is not set +CONFIG_OPROFILE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -112,6 +111,12 @@ CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NLS_DEFAULT="n" +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_HW is not set CONFIG_XZ_DEC=y CONFIG_PRINTK_TIME=y CONFIG_MESSAGE_LOGLEVEL_DEFAULT=3 @@ -119,9 +124,3 @@ CONFIG_DYNAMIC_DEBUG=y CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y CONFIG_DETECT_HUNG_TASK=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/powerpc/configs/44x/iss476-smp_defconfig b/arch/powerpc/configs/44x/iss476-smp_defconfig index d24bfa6ecd62..775b25178714 100644 --- a/arch/powerpc/configs/44x/iss476-smp_defconfig +++ b/arch/powerpc/configs/44x/iss476-smp_defconfig @@ -1,5 +1,3 @@ -CONFIG_44x=y -CONFIG_SMP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_LOG_BUF_SHIFT=14 @@ -7,21 +5,23 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE_PREPEND="root=/dev/issblk0" +CONFIG_44x=y +CONFIG_SMP=y CONFIG_PPC_47x=y # CONFIG_EBONY is not set CONFIG_ISS4xx=y CONFIG_HZ_100=y CONFIG_MATH_EMULATION=y CONFIG_IRQ_ALL_CPUS=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="root=/dev/issblk0" # CONFIG_PCI is not set CONFIG_ADVANCED_OPTIONS=y CONFIG_DYNAMIC_MEMSTART=y +CONFIG_OPROFILE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -62,13 +62,13 @@ CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_NETWORK_FILESYSTEMS is not set -CONFIG_DEBUG_INFO=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_PPC_EARLY_DEBUG=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_HW is not set +CONFIG_DEBUG_INFO=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_PPC_EARLY_DEBUG=y diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig index 6c02f53271cd..4b76897e323f 100644 --- a/arch/powerpc/configs/44x/warp_defconfig +++ b/arch/powerpc/configs/44x/warp_defconfig @@ -1,4 +1,3 @@ -CONFIG_44x=y CONFIG_LOCALVERSION="-pika" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y @@ -7,16 +6,17 @@ CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE_PREPEND="ip=on" +CONFIG_44x=y #
[PATCH 3/3] powerpc: convert config files to generic cmdline
This is a scripted mass convert of the config files to use the new generic cmdline. There is a bit of a trim effect here. It would seems that some of the config haven't been trimmed in a while. The script used to convert is as follows, if [[ -z "$1" || -z "$2" ]]; then echo "Two arguments are needed." exit 1 fi mkdir $1 cp $2 $1/.config sed -i 's/CONFIG_CMDLINE=/CONFIG_CMDLINE_PREPEND=/g' $1/.config make ARCH=$1 O=$1 olddefconfig make ARCH=$1 O=$1 savedefconfig cp $1/defconfig $2 rm -Rf $1 Cc: xe-linux-exter...@cisco.com Cc: Daniel Walker Signed-off-by: Daniel Walker --- arch/powerpc/configs/44x/fsp2_defconfig | 29 arch/powerpc/configs/44x/iss476-smp_defconfig | 24 +++--- arch/powerpc/configs/44x/warp_defconfig | 12 +++ arch/powerpc/configs/holly_defconfig | 12 +++ arch/powerpc/configs/mvme5100_defconfig | 25 +++--- arch/powerpc/configs/skiroot_defconfig| 48 +-- arch/powerpc/configs/storcenter_defconfig | 15 - 7 files changed, 80 insertions(+), 85 deletions(-) diff --git a/arch/powerpc/configs/44x/fsp2_defconfig b/arch/powerpc/configs/44x/fsp2_defconfig index bae6b26bcfba..bafea495c9b8 100644 --- a/arch/powerpc/configs/44x/fsp2_defconfig +++ b/arch/powerpc/configs/44x/fsp2_defconfig @@ -1,8 +1,6 @@ -CONFIG_44x=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y # CONFIG_CROSS_MEMORY_ATTACH is not set -# CONFIG_FHANDLE is not set CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y @@ -13,25 +11,26 @@ CONFIG_BLK_DEV_INITRD=y # CONFIG_RD_XZ is not set # CONFIG_RD_LZO is not set # CONFIG_RD_LZ4 is not set +# CONFIG_FHANDLE is not set CONFIG_KALLSYMS_ALL=y CONFIG_BPF_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE_PREPEND="ip=on rw" +CONFIG_44x=y CONFIG_PPC_47x=y # CONFIG_EBONY is not set CONFIG_FSP2=y CONFIG_476FPE_ERR46=y -CONFIG_SWIOTLB=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="ip=on rw" # CONFIG_SUSPEND is not set # CONFIG_PCI is not set +CONFIG_OPROFILE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -112,6 +111,12 @@ CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NLS_DEFAULT="n" +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_HW is not set CONFIG_XZ_DEC=y CONFIG_PRINTK_TIME=y CONFIG_MESSAGE_LOGLEVEL_DEFAULT=3 @@ -119,9 +124,3 @@ CONFIG_DYNAMIC_DEBUG=y CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y CONFIG_DETECT_HUNG_TASK=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/powerpc/configs/44x/iss476-smp_defconfig b/arch/powerpc/configs/44x/iss476-smp_defconfig index d24bfa6ecd62..775b25178714 100644 --- a/arch/powerpc/configs/44x/iss476-smp_defconfig +++ b/arch/powerpc/configs/44x/iss476-smp_defconfig @@ -1,5 +1,3 @@ -CONFIG_44x=y -CONFIG_SMP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_LOG_BUF_SHIFT=14 @@ -7,21 +5,23 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE_PREPEND="root=/dev/issblk0" +CONFIG_44x=y +CONFIG_SMP=y CONFIG_PPC_47x=y # CONFIG_EBONY is not set CONFIG_ISS4xx=y CONFIG_HZ_100=y CONFIG_MATH_EMULATION=y CONFIG_IRQ_ALL_CPUS=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="root=/dev/issblk0" # CONFIG_PCI is not set CONFIG_ADVANCED_OPTIONS=y CONFIG_DYNAMIC_MEMSTART=y +CONFIG_OPROFILE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -62,13 +62,13 @@ CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_NETWORK_FILESYSTEMS is not set -CONFIG_DEBUG_INFO=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_PPC_EARLY_DEBUG=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_HW is not set +CONFIG_DEBUG_INFO=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_PPC_EARLY_DEBUG=y diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig index 6c02f53271cd..4b76897e323f 100644 --- a/arch/powerpc/configs/44x/warp_defconfig +++ b/arch/powerpc/configs/44x/warp_defconfig @@ -1,4 +1,3 @@ -CONFIG_44x=y CONFIG_LOCALVERSION="-pika" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y @@ -7,16 +6,17 @@ CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE_PREPEND="ip=on" +CONFIG_44x=y #
