The ti_usb_3410_5052 has supported changing the closing_wait parameter
through TIOCSSERIAL (setserial) for about a decade and commit
f1175daa5312 ("USB: ti_usb_3410_5052: kill custom closing_wait").
It's time to drop the corresponding driver-specific module parameter.
Signed-off-by: Johan Hovold <jo...@kernel.org>
---
drivers/usb/serial/ti_usb_3410_5052.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c
b/drivers/usb/serial/ti_usb_3410_5052.c
index c312d0cce5fb..35cc1be738ef 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -344,8 +344,6 @@ static int ti_write_byte(struct usb_serial_port *port,
struct ti_device *tdev,
static int ti_download_firmware(struct ti_device *tdev);
-static int closing_wait = TI_DEFAULT_CLOSING_WAIT;
-
static const struct usb_device_id ti_id_table_3410[] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
@@ -497,10 +495,6 @@ MODULE_FIRMWARE("moxa/moxa-1131.fw");
MODULE_FIRMWARE("moxa/moxa-1150.fw");
MODULE_FIRMWARE("moxa/moxa-1151.fw");
-module_param(closing_wait, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(closing_wait,
- "Maximum wait for data to drain in close, in .01 secs, default is 4000");
-
MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
module_usb_serial_driver(serial_drivers, ti_id_table_combined);
@@ -608,7 +602,7 @@ static int ti_port_probe(struct usb_serial_port *port)
tport->tp_uart_base_addr = TI_UART1_BASE_ADDR;
else
tport->tp_uart_base_addr = TI_UART2_BASE_ADDR;
- port->port.closing_wait = msecs_to_jiffies(10 * closing_wait);
+ port->port.closing_wait = msecs_to_jiffies(10 *
TI_DEFAULT_CLOSING_WAIT);
tport->tp_port = port;
tport->tp_tdev = usb_get_serial_data(port->serial);
--
2.26.3
