Try to add DMA support to the uart nodes following
the assignments made in the dts from the victoria vendor kernel
here:
https://consumer.huawei.com/en/opensource/detail/?siteCode=worldwide&keywords=p10&fileType=openSourceSoftware&pageSize=10&curPage=1
Cc: Tanglei Han <hantang...@huawei.com>
Cc: Zhuangluan Su <suzhuangl...@hisilicon.com>
Cc: Ryan Grachek <r...@edited.us>
Cc: Manivannan Sadhasivam <manivannan.sadhasi...@linaro.org>
Cc: Wei Xu <xuw...@hisilicon.com>
Cc: Rob Herring <robh...@kernel.org>
Cc: Mark Rutland <mark.rutl...@arm.com>
Cc: linux-arm-ker...@lists.infradead.org
Cc: devicet...@vger.kernel.org
Signed-off-by: John Stultz <john.stu...@linaro.org>
---
v3:
* Remove dma enablment on uart0 which would use reserved channel 0
---
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 20ae40d..4c8d682 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -478,6 +478,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf00000 0x0 0x1000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ dma-names = "rx", "tx";
+ dmas = <&dma0 2 &dma0 3>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>,
<&crg_ctrl HI3660_CLK_GATE_UART1>;
clock-names = "uartclk", "apb_pclk";
@@ -490,6 +492,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf03000 0x0 0x1000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ dma-names = "rx", "tx";
+ dmas = <&dma0 4 &dma0 5>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>,
<&crg_ctrl HI3660_PCLK>;
clock-names = "uartclk", "apb_pclk";
@@ -514,6 +518,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf01000 0x0 0x1000>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ dma-names = "rx", "tx";
+ dmas = <&dma0 6 &dma0 7>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>,
<&crg_ctrl HI3660_CLK_GATE_UART4>;
clock-names = "uartclk", "apb_pclk";
@@ -526,6 +532,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf05000 0x0 0x1000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ dma-names = "rx", "tx";
+ dmas = <&dma0 8 &dma0 9>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>,
<&crg_ctrl HI3660_CLK_GATE_UART5>;
clock-names = "uartclk", "apb_pclk";
--
2.7.4
