Re: [PATCH 6/9] powerpc/85xx: support sleep feature on QorIQ SoCs with RCPM
On Wed, 2014-03-12 at 16:08 +0800, Chenhui Zhao wrote: > On Tue, Mar 11, 2014 at 07:00:27PM -0500, Scott Wood wrote: > > On Fri, 2014-03-07 at 12:58 +0800, Chenhui Zhao wrote: > > > In sleep mode, the clocks of e500 cores and unused IP blocks is > > > turned off. The IP blocks which are allowed to wake up the processor > > > are still running. > > > > > > The sleep mode is equal to the Standby state in Linux. Use the > > > command to enter sleep mode: > > > echo standby > /sys/power/state > > > > > > Signed-off-by: Chenhui Zhao > > > --- > > > arch/powerpc/Kconfig |4 +- > > > arch/powerpc/platforms/85xx/Makefile |3 + > > > arch/powerpc/platforms/85xx/qoriq_pm.c | 78 > > > > > > 3 files changed, 83 insertions(+), 2 deletions(-) > > > create mode 100644 arch/powerpc/platforms/85xx/qoriq_pm.c > > > > > > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig > > > index 05f6323..e1d6510 100644 > > > --- a/arch/powerpc/Kconfig > > > +++ b/arch/powerpc/Kconfig > > > @@ -222,7 +222,7 @@ config ARCH_HIBERNATION_POSSIBLE > > > config ARCH_SUSPEND_POSSIBLE > > > def_bool y > > > depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \ > > > -(PPC_85xx && !PPC_E500MC) || PPC_86xx || PPC_PSERIES \ > > > +FSL_SOC_BOOKE || PPC_86xx || PPC_PSERIES \ > > > || 44x || 40x > > > > > > config PPC_DCR_NATIVE > > > @@ -709,7 +709,7 @@ config FSL_PCI > > > config FSL_PMC > > > bool > > > default y > > > - depends on SUSPEND && (PPC_85xx || PPC_86xx) > > > + depends on SUSPEND && (PPC_85xx && !PPC_E500MC || PPC_86xx) > > > > Don't mix && and || without parentheses. > > > > Maybe convert this into being selected (similar to FSL_RCPM), rather > > than default y? > > Yes, will do. > > > > > > diff --git a/arch/powerpc/platforms/85xx/Makefile > > > b/arch/powerpc/platforms/85xx/Makefile > > > index 25cebe7..7fae817 100644 > > > --- a/arch/powerpc/platforms/85xx/Makefile > > > +++ b/arch/powerpc/platforms/85xx/Makefile > > > @@ -2,6 +2,9 @@ > > > # Makefile for the PowerPC 85xx linux kernel. > > > # > > > obj-$(CONFIG_SMP) += smp.o > > > +ifeq ($(CONFIG_FSL_CORENET_RCPM), y) > > > +obj-$(CONFIG_SUSPEND)+= qoriq_pm.o > > > +endif > > > > There should probably be a kconfig symbol for this. > > OK. > > > > > > diff --git a/arch/powerpc/platforms/85xx/qoriq_pm.c > > > b/arch/powerpc/platforms/85xx/qoriq_pm.c > > > new file mode 100644 > > > index 000..915b13b > > > --- /dev/null > > > +++ b/arch/powerpc/platforms/85xx/qoriq_pm.c > > > @@ -0,0 +1,78 @@ > > > +/* > > > + * Support Power Management feature > > > + * > > > + * Copyright 2014 Freescale Semiconductor Inc. > > > + * > > > + * Author: Chenhui Zhao > > > + * > > > + * This program is free software; you can redistribute it and/or > > > modify it > > > + * under the terms of the GNU General Public License as published by > > > the > > > + * Free Software Foundation; either version 2 of the License, or (at > > > your > > > + * option) any later version. > > > + */ > > > + > > > +#include > > > +#include > > > +#include > > > + > > > +#include > > > + > > > +#define FSL_SLEEP0x1 > > > +#define FSL_DEEP_SLEEP 0x2 > > > > FSL_DEEP_SLEEP is unused. > > Will be used in the last patch. > [PATCH 9/9] powerpc/pm: support deep sleep feature on T1040 Ideally the #define would have been introduced in that patch. > > > + sleep_modes = FSL_SLEEP; > > > + sleep_pm_state = PLAT_PM_SLEEP; > > > + > > > + np = of_find_compatible_node(NULL, NULL, "fsl,qoriq-rcpm-2.0"); > > > + if (np) > > > + sleep_pm_state = PLAT_PM_LPM20; > > > + > > > + suspend_set_ops(_suspend_ops); > > > + > > > + return 0; > > > +} > > > +arch_initcall(qoriq_suspend_init); > > > > Why is this not a platform driver? If fsl_pmc can do it... > > > > -Scott > > It can be, but what advantage of being a platform driver. If nothing else, compliance with the standard way of doing things. Why not make it a platform driver? You'd be able to use dev_err, have a place in sysfs if attributes are needed in the future, etc. A better answer might be that there are multiple not-very-related files driving different portions of RCPM. -Scott -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH 6/9] powerpc/85xx: support sleep feature on QorIQ SoCs with RCPM
On Wed, 2014-03-12 at 16:08 +0800, Chenhui Zhao wrote: On Tue, Mar 11, 2014 at 07:00:27PM -0500, Scott Wood wrote: On Fri, 2014-03-07 at 12:58 +0800, Chenhui Zhao wrote: In sleep mode, the clocks of e500 cores and unused IP blocks is turned off. The IP blocks which are allowed to wake up the processor are still running. The sleep mode is equal to the Standby state in Linux. Use the command to enter sleep mode: echo standby /sys/power/state Signed-off-by: Chenhui Zhao chenhui.z...@freescale.com --- arch/powerpc/Kconfig |4 +- arch/powerpc/platforms/85xx/Makefile |3 + arch/powerpc/platforms/85xx/qoriq_pm.c | 78 3 files changed, 83 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/platforms/85xx/qoriq_pm.c diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 05f6323..e1d6510 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -222,7 +222,7 @@ config ARCH_HIBERNATION_POSSIBLE config ARCH_SUSPEND_POSSIBLE def_bool y depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \ -(PPC_85xx !PPC_E500MC) || PPC_86xx || PPC_PSERIES \ +FSL_SOC_BOOKE || PPC_86xx || PPC_PSERIES \ || 44x || 40x config PPC_DCR_NATIVE @@ -709,7 +709,7 @@ config FSL_PCI config FSL_PMC bool default y - depends on SUSPEND (PPC_85xx || PPC_86xx) + depends on SUSPEND (PPC_85xx !PPC_E500MC || PPC_86xx) Don't mix and || without parentheses. Maybe convert this into being selected (similar to FSL_RCPM), rather than default y? Yes, will do. diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 25cebe7..7fae817 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -2,6 +2,9 @@ # Makefile for the PowerPC 85xx linux kernel. # obj-$(CONFIG_SMP) += smp.o +ifeq ($(CONFIG_FSL_CORENET_RCPM), y) +obj-$(CONFIG_SUSPEND)+= qoriq_pm.o +endif There should probably be a kconfig symbol for this. OK. diff --git a/arch/powerpc/platforms/85xx/qoriq_pm.c b/arch/powerpc/platforms/85xx/qoriq_pm.c new file mode 100644 index 000..915b13b --- /dev/null +++ b/arch/powerpc/platforms/85xx/qoriq_pm.c @@ -0,0 +1,78 @@ +/* + * Support Power Management feature + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Author: Chenhui Zhao chenhui.z...@freescale.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include linux/kernel.h +#include linux/suspend.h +#include linux/of_platform.h + +#include sysdev/fsl_soc.h + +#define FSL_SLEEP0x1 +#define FSL_DEEP_SLEEP 0x2 FSL_DEEP_SLEEP is unused. Will be used in the last patch. [PATCH 9/9] powerpc/pm: support deep sleep feature on T1040 Ideally the #define would have been introduced in that patch. + sleep_modes = FSL_SLEEP; + sleep_pm_state = PLAT_PM_SLEEP; + + np = of_find_compatible_node(NULL, NULL, fsl,qoriq-rcpm-2.0); + if (np) + sleep_pm_state = PLAT_PM_LPM20; + + suspend_set_ops(qoriq_suspend_ops); + + return 0; +} +arch_initcall(qoriq_suspend_init); Why is this not a platform driver? If fsl_pmc can do it... -Scott It can be, but what advantage of being a platform driver. If nothing else, compliance with the standard way of doing things. Why not make it a platform driver? You'd be able to use dev_err, have a place in sysfs if attributes are needed in the future, etc. A better answer might be that there are multiple not-very-related files driving different portions of RCPM. -Scott -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH 6/9] powerpc/85xx: support sleep feature on QorIQ SoCs with RCPM
On Tue, Mar 11, 2014 at 07:00:27PM -0500, Scott Wood wrote: > On Fri, 2014-03-07 at 12:58 +0800, Chenhui Zhao wrote: > > In sleep mode, the clocks of e500 cores and unused IP blocks is > > turned off. The IP blocks which are allowed to wake up the processor > > are still running. > > > > The sleep mode is equal to the Standby state in Linux. Use the > > command to enter sleep mode: > > echo standby > /sys/power/state > > > > Signed-off-by: Chenhui Zhao > > --- > > arch/powerpc/Kconfig |4 +- > > arch/powerpc/platforms/85xx/Makefile |3 + > > arch/powerpc/platforms/85xx/qoriq_pm.c | 78 > > > > 3 files changed, 83 insertions(+), 2 deletions(-) > > create mode 100644 arch/powerpc/platforms/85xx/qoriq_pm.c > > > > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig > > index 05f6323..e1d6510 100644 > > --- a/arch/powerpc/Kconfig > > +++ b/arch/powerpc/Kconfig > > @@ -222,7 +222,7 @@ config ARCH_HIBERNATION_POSSIBLE > > config ARCH_SUSPEND_POSSIBLE > > def_bool y > > depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \ > > - (PPC_85xx && !PPC_E500MC) || PPC_86xx || PPC_PSERIES \ > > + FSL_SOC_BOOKE || PPC_86xx || PPC_PSERIES \ > >|| 44x || 40x > > > > config PPC_DCR_NATIVE > > @@ -709,7 +709,7 @@ config FSL_PCI > > config FSL_PMC > > bool > > default y > > - depends on SUSPEND && (PPC_85xx || PPC_86xx) > > + depends on SUSPEND && (PPC_85xx && !PPC_E500MC || PPC_86xx) > > Don't mix && and || without parentheses. > > Maybe convert this into being selected (similar to FSL_RCPM), rather > than default y? Yes, will do. > > > diff --git a/arch/powerpc/platforms/85xx/Makefile > > b/arch/powerpc/platforms/85xx/Makefile > > index 25cebe7..7fae817 100644 > > --- a/arch/powerpc/platforms/85xx/Makefile > > +++ b/arch/powerpc/platforms/85xx/Makefile > > @@ -2,6 +2,9 @@ > > # Makefile for the PowerPC 85xx linux kernel. > > # > > obj-$(CONFIG_SMP) += smp.o > > +ifeq ($(CONFIG_FSL_CORENET_RCPM), y) > > +obj-$(CONFIG_SUSPEND) += qoriq_pm.o > > +endif > > There should probably be a kconfig symbol for this. OK. > > > diff --git a/arch/powerpc/platforms/85xx/qoriq_pm.c > > b/arch/powerpc/platforms/85xx/qoriq_pm.c > > new file mode 100644 > > index 000..915b13b > > --- /dev/null > > +++ b/arch/powerpc/platforms/85xx/qoriq_pm.c > > @@ -0,0 +1,78 @@ > > +/* > > + * Support Power Management feature > > + * > > + * Copyright 2014 Freescale Semiconductor Inc. > > + * > > + * Author: Chenhui Zhao > > + * > > + * This program is free software; you can redistribute it and/or > > modify it > > + * under the terms of the GNU General Public License as published by > > the > > + * Free Software Foundation; either version 2 of the License, or (at your > > + * option) any later version. > > + */ > > + > > +#include > > +#include > > +#include > > + > > +#include > > + > > +#define FSL_SLEEP 0x1 > > +#define FSL_DEEP_SLEEP 0x2 > > FSL_DEEP_SLEEP is unused. Will be used in the last patch. [PATCH 9/9] powerpc/pm: support deep sleep feature on T1040 > > > + > > +/* specify the sleep state of the present platform */ > > +int sleep_pm_state; > > +/* supported sleep modes by the present platform */ > > +static unsigned int sleep_modes; > > Why is one signed and the other unsigned? Undesigned. Will change them all to unsigned. > > > + > > +static int qoriq_suspend_enter(suspend_state_t state) > > +{ > > + int ret = 0; > > + > > + switch (state) { > > + case PM_SUSPEND_STANDBY: > > + > > + if (cur_cpu_spec->cpu_flush_caches) > > + cur_cpu_spec->cpu_flush_caches(); > > + > > + ret = qoriq_pm_ops->plat_enter_state(sleep_pm_state); > > + > > + break; > > + > > + default: > > + ret = -EINVAL; > > + > > + } > > + > > + return ret; > > +} > > + > > +static int qoriq_suspend_valid(suspend_state_t state) > > +{ > > + if (state == PM_SUSPEND_STANDBY && (sleep_modes & FSL_SLEEP)) > > + return 1; > > + > > + return 0; > > +} > > + > > +static const struct platform_suspend_ops qoriq_suspend_ops = { > > + .valid = qoriq_suspend_valid, > > + .enter = qoriq_suspend_enter, > > +}; > > + > > +static int __init qoriq_suspend_init(void) > > +{ > > + struct device_node *np; > > + > > + sleep_modes = FSL_SLEEP; > > + sleep_pm_state = PLAT_PM_SLEEP; > > + > > + np = of_find_compatible_node(NULL, NULL, "fsl,qoriq-rcpm-2.0"); > > + if (np) > > + sleep_pm_state = PLAT_PM_LPM20; > > + > > + suspend_set_ops(_suspend_ops); > > + > > + return 0; > > +} > > +arch_initcall(qoriq_suspend_init); > > Why is this not a platform driver? If fsl_pmc can do it... > > -Scott It can be, but what advantage of being a platform driver. -Chenhui -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to
Re: [PATCH 6/9] powerpc/85xx: support sleep feature on QorIQ SoCs with RCPM
On Tue, Mar 11, 2014 at 07:00:27PM -0500, Scott Wood wrote: On Fri, 2014-03-07 at 12:58 +0800, Chenhui Zhao wrote: In sleep mode, the clocks of e500 cores and unused IP blocks is turned off. The IP blocks which are allowed to wake up the processor are still running. The sleep mode is equal to the Standby state in Linux. Use the command to enter sleep mode: echo standby /sys/power/state Signed-off-by: Chenhui Zhao chenhui.z...@freescale.com --- arch/powerpc/Kconfig |4 +- arch/powerpc/platforms/85xx/Makefile |3 + arch/powerpc/platforms/85xx/qoriq_pm.c | 78 3 files changed, 83 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/platforms/85xx/qoriq_pm.c diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 05f6323..e1d6510 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -222,7 +222,7 @@ config ARCH_HIBERNATION_POSSIBLE config ARCH_SUSPEND_POSSIBLE def_bool y depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \ - (PPC_85xx !PPC_E500MC) || PPC_86xx || PPC_PSERIES \ + FSL_SOC_BOOKE || PPC_86xx || PPC_PSERIES \ || 44x || 40x config PPC_DCR_NATIVE @@ -709,7 +709,7 @@ config FSL_PCI config FSL_PMC bool default y - depends on SUSPEND (PPC_85xx || PPC_86xx) + depends on SUSPEND (PPC_85xx !PPC_E500MC || PPC_86xx) Don't mix and || without parentheses. Maybe convert this into being selected (similar to FSL_RCPM), rather than default y? Yes, will do. diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 25cebe7..7fae817 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -2,6 +2,9 @@ # Makefile for the PowerPC 85xx linux kernel. # obj-$(CONFIG_SMP) += smp.o +ifeq ($(CONFIG_FSL_CORENET_RCPM), y) +obj-$(CONFIG_SUSPEND) += qoriq_pm.o +endif There should probably be a kconfig symbol for this. OK. diff --git a/arch/powerpc/platforms/85xx/qoriq_pm.c b/arch/powerpc/platforms/85xx/qoriq_pm.c new file mode 100644 index 000..915b13b --- /dev/null +++ b/arch/powerpc/platforms/85xx/qoriq_pm.c @@ -0,0 +1,78 @@ +/* + * Support Power Management feature + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Author: Chenhui Zhao chenhui.z...@freescale.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include linux/kernel.h +#include linux/suspend.h +#include linux/of_platform.h + +#include sysdev/fsl_soc.h + +#define FSL_SLEEP 0x1 +#define FSL_DEEP_SLEEP 0x2 FSL_DEEP_SLEEP is unused. Will be used in the last patch. [PATCH 9/9] powerpc/pm: support deep sleep feature on T1040 + +/* specify the sleep state of the present platform */ +int sleep_pm_state; +/* supported sleep modes by the present platform */ +static unsigned int sleep_modes; Why is one signed and the other unsigned? Undesigned. Will change them all to unsigned. + +static int qoriq_suspend_enter(suspend_state_t state) +{ + int ret = 0; + + switch (state) { + case PM_SUSPEND_STANDBY: + + if (cur_cpu_spec-cpu_flush_caches) + cur_cpu_spec-cpu_flush_caches(); + + ret = qoriq_pm_ops-plat_enter_state(sleep_pm_state); + + break; + + default: + ret = -EINVAL; + + } + + return ret; +} + +static int qoriq_suspend_valid(suspend_state_t state) +{ + if (state == PM_SUSPEND_STANDBY (sleep_modes FSL_SLEEP)) + return 1; + + return 0; +} + +static const struct platform_suspend_ops qoriq_suspend_ops = { + .valid = qoriq_suspend_valid, + .enter = qoriq_suspend_enter, +}; + +static int __init qoriq_suspend_init(void) +{ + struct device_node *np; + + sleep_modes = FSL_SLEEP; + sleep_pm_state = PLAT_PM_SLEEP; + + np = of_find_compatible_node(NULL, NULL, fsl,qoriq-rcpm-2.0); + if (np) + sleep_pm_state = PLAT_PM_LPM20; + + suspend_set_ops(qoriq_suspend_ops); + + return 0; +} +arch_initcall(qoriq_suspend_init); Why is this not a platform driver? If fsl_pmc can do it... -Scott It can be, but what advantage of being a platform driver. -Chenhui -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH 6/9] powerpc/85xx: support sleep feature on QorIQ SoCs with RCPM
On Fri, 2014-03-07 at 12:58 +0800, Chenhui Zhao wrote: > In sleep mode, the clocks of e500 cores and unused IP blocks is > turned off. The IP blocks which are allowed to wake up the processor > are still running. > > The sleep mode is equal to the Standby state in Linux. Use the > command to enter sleep mode: > echo standby > /sys/power/state > > Signed-off-by: Chenhui Zhao > --- > arch/powerpc/Kconfig |4 +- > arch/powerpc/platforms/85xx/Makefile |3 + > arch/powerpc/platforms/85xx/qoriq_pm.c | 78 > > 3 files changed, 83 insertions(+), 2 deletions(-) > create mode 100644 arch/powerpc/platforms/85xx/qoriq_pm.c > > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig > index 05f6323..e1d6510 100644 > --- a/arch/powerpc/Kconfig > +++ b/arch/powerpc/Kconfig > @@ -222,7 +222,7 @@ config ARCH_HIBERNATION_POSSIBLE > config ARCH_SUSPEND_POSSIBLE > def_bool y > depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \ > -(PPC_85xx && !PPC_E500MC) || PPC_86xx || PPC_PSERIES \ > +FSL_SOC_BOOKE || PPC_86xx || PPC_PSERIES \ > || 44x || 40x > > config PPC_DCR_NATIVE > @@ -709,7 +709,7 @@ config FSL_PCI > config FSL_PMC > bool > default y > - depends on SUSPEND && (PPC_85xx || PPC_86xx) > + depends on SUSPEND && (PPC_85xx && !PPC_E500MC || PPC_86xx) Don't mix && and || without parentheses. Maybe convert this into being selected (similar to FSL_RCPM), rather than default y? > diff --git a/arch/powerpc/platforms/85xx/Makefile > b/arch/powerpc/platforms/85xx/Makefile > index 25cebe7..7fae817 100644 > --- a/arch/powerpc/platforms/85xx/Makefile > +++ b/arch/powerpc/platforms/85xx/Makefile > @@ -2,6 +2,9 @@ > # Makefile for the PowerPC 85xx linux kernel. > # > obj-$(CONFIG_SMP) += smp.o > +ifeq ($(CONFIG_FSL_CORENET_RCPM), y) > +obj-$(CONFIG_SUSPEND)+= qoriq_pm.o > +endif There should probably be a kconfig symbol for this. > diff --git a/arch/powerpc/platforms/85xx/qoriq_pm.c > b/arch/powerpc/platforms/85xx/qoriq_pm.c > new file mode 100644 > index 000..915b13b > --- /dev/null > +++ b/arch/powerpc/platforms/85xx/qoriq_pm.c > @@ -0,0 +1,78 @@ > +/* > + * Support Power Management feature > + * > + * Copyright 2014 Freescale Semiconductor Inc. > + * > + * Author: Chenhui Zhao > + * > + * This program is free software; you can redistribute it and/or > modify it > + * under the terms of the GNU General Public License as published by > the > + * Free Software Foundation; either version 2 of the License, or (at your > + * option) any later version. > + */ > + > +#include > +#include > +#include > + > +#include > + > +#define FSL_SLEEP0x1 > +#define FSL_DEEP_SLEEP 0x2 FSL_DEEP_SLEEP is unused. > + > +/* specify the sleep state of the present platform */ > +int sleep_pm_state; > +/* supported sleep modes by the present platform */ > +static unsigned int sleep_modes; Why is one signed and the other unsigned? > + > +static int qoriq_suspend_enter(suspend_state_t state) > +{ > + int ret = 0; > + > + switch (state) { > + case PM_SUSPEND_STANDBY: > + > + if (cur_cpu_spec->cpu_flush_caches) > + cur_cpu_spec->cpu_flush_caches(); > + > + ret = qoriq_pm_ops->plat_enter_state(sleep_pm_state); > + > + break; > + > + default: > + ret = -EINVAL; > + > + } > + > + return ret; > +} > + > +static int qoriq_suspend_valid(suspend_state_t state) > +{ > + if (state == PM_SUSPEND_STANDBY && (sleep_modes & FSL_SLEEP)) > + return 1; > + > + return 0; > +} > + > +static const struct platform_suspend_ops qoriq_suspend_ops = { > + .valid = qoriq_suspend_valid, > + .enter = qoriq_suspend_enter, > +}; > + > +static int __init qoriq_suspend_init(void) > +{ > + struct device_node *np; > + > + sleep_modes = FSL_SLEEP; > + sleep_pm_state = PLAT_PM_SLEEP; > + > + np = of_find_compatible_node(NULL, NULL, "fsl,qoriq-rcpm-2.0"); > + if (np) > + sleep_pm_state = PLAT_PM_LPM20; > + > + suspend_set_ops(_suspend_ops); > + > + return 0; > +} > +arch_initcall(qoriq_suspend_init); Why is this not a platform driver? If fsl_pmc can do it... -Scott -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH 6/9] powerpc/85xx: support sleep feature on QorIQ SoCs with RCPM
On Fri, 2014-03-07 at 12:58 +0800, Chenhui Zhao wrote: In sleep mode, the clocks of e500 cores and unused IP blocks is turned off. The IP blocks which are allowed to wake up the processor are still running. The sleep mode is equal to the Standby state in Linux. Use the command to enter sleep mode: echo standby /sys/power/state Signed-off-by: Chenhui Zhao chenhui.z...@freescale.com --- arch/powerpc/Kconfig |4 +- arch/powerpc/platforms/85xx/Makefile |3 + arch/powerpc/platforms/85xx/qoriq_pm.c | 78 3 files changed, 83 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/platforms/85xx/qoriq_pm.c diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 05f6323..e1d6510 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -222,7 +222,7 @@ config ARCH_HIBERNATION_POSSIBLE config ARCH_SUSPEND_POSSIBLE def_bool y depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \ -(PPC_85xx !PPC_E500MC) || PPC_86xx || PPC_PSERIES \ +FSL_SOC_BOOKE || PPC_86xx || PPC_PSERIES \ || 44x || 40x config PPC_DCR_NATIVE @@ -709,7 +709,7 @@ config FSL_PCI config FSL_PMC bool default y - depends on SUSPEND (PPC_85xx || PPC_86xx) + depends on SUSPEND (PPC_85xx !PPC_E500MC || PPC_86xx) Don't mix and || without parentheses. Maybe convert this into being selected (similar to FSL_RCPM), rather than default y? diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 25cebe7..7fae817 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -2,6 +2,9 @@ # Makefile for the PowerPC 85xx linux kernel. # obj-$(CONFIG_SMP) += smp.o +ifeq ($(CONFIG_FSL_CORENET_RCPM), y) +obj-$(CONFIG_SUSPEND)+= qoriq_pm.o +endif There should probably be a kconfig symbol for this. diff --git a/arch/powerpc/platforms/85xx/qoriq_pm.c b/arch/powerpc/platforms/85xx/qoriq_pm.c new file mode 100644 index 000..915b13b --- /dev/null +++ b/arch/powerpc/platforms/85xx/qoriq_pm.c @@ -0,0 +1,78 @@ +/* + * Support Power Management feature + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Author: Chenhui Zhao chenhui.z...@freescale.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include linux/kernel.h +#include linux/suspend.h +#include linux/of_platform.h + +#include sysdev/fsl_soc.h + +#define FSL_SLEEP0x1 +#define FSL_DEEP_SLEEP 0x2 FSL_DEEP_SLEEP is unused. + +/* specify the sleep state of the present platform */ +int sleep_pm_state; +/* supported sleep modes by the present platform */ +static unsigned int sleep_modes; Why is one signed and the other unsigned? + +static int qoriq_suspend_enter(suspend_state_t state) +{ + int ret = 0; + + switch (state) { + case PM_SUSPEND_STANDBY: + + if (cur_cpu_spec-cpu_flush_caches) + cur_cpu_spec-cpu_flush_caches(); + + ret = qoriq_pm_ops-plat_enter_state(sleep_pm_state); + + break; + + default: + ret = -EINVAL; + + } + + return ret; +} + +static int qoriq_suspend_valid(suspend_state_t state) +{ + if (state == PM_SUSPEND_STANDBY (sleep_modes FSL_SLEEP)) + return 1; + + return 0; +} + +static const struct platform_suspend_ops qoriq_suspend_ops = { + .valid = qoriq_suspend_valid, + .enter = qoriq_suspend_enter, +}; + +static int __init qoriq_suspend_init(void) +{ + struct device_node *np; + + sleep_modes = FSL_SLEEP; + sleep_pm_state = PLAT_PM_SLEEP; + + np = of_find_compatible_node(NULL, NULL, fsl,qoriq-rcpm-2.0); + if (np) + sleep_pm_state = PLAT_PM_LPM20; + + suspend_set_ops(qoriq_suspend_ops); + + return 0; +} +arch_initcall(qoriq_suspend_init); Why is this not a platform driver? If fsl_pmc can do it... -Scott -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[PATCH 6/9] powerpc/85xx: support sleep feature on QorIQ SoCs with RCPM
In sleep mode, the clocks of e500 cores and unused IP blocks is turned off. The IP blocks which are allowed to wake up the processor are still running. The sleep mode is equal to the Standby state in Linux. Use the command to enter sleep mode: echo standby > /sys/power/state Signed-off-by: Chenhui Zhao --- arch/powerpc/Kconfig |4 +- arch/powerpc/platforms/85xx/Makefile |3 + arch/powerpc/platforms/85xx/qoriq_pm.c | 78 3 files changed, 83 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/platforms/85xx/qoriq_pm.c diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 05f6323..e1d6510 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -222,7 +222,7 @@ config ARCH_HIBERNATION_POSSIBLE config ARCH_SUSPEND_POSSIBLE def_bool y depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \ - (PPC_85xx && !PPC_E500MC) || PPC_86xx || PPC_PSERIES \ + FSL_SOC_BOOKE || PPC_86xx || PPC_PSERIES \ || 44x || 40x config PPC_DCR_NATIVE @@ -709,7 +709,7 @@ config FSL_PCI config FSL_PMC bool default y - depends on SUSPEND && (PPC_85xx || PPC_86xx) + depends on SUSPEND && (PPC_85xx && !PPC_E500MC || PPC_86xx) help Freescale MPC85xx/MPC86xx power management controller support (suspend/resume). For MPC83xx see platforms/83xx/suspend.c diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 25cebe7..7fae817 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -2,6 +2,9 @@ # Makefile for the PowerPC 85xx linux kernel. # obj-$(CONFIG_SMP) += smp.o +ifeq ($(CONFIG_FSL_CORENET_RCPM), y) +obj-$(CONFIG_SUSPEND) += qoriq_pm.o +endif obj-y += common.o diff --git a/arch/powerpc/platforms/85xx/qoriq_pm.c b/arch/powerpc/platforms/85xx/qoriq_pm.c new file mode 100644 index 000..915b13b --- /dev/null +++ b/arch/powerpc/platforms/85xx/qoriq_pm.c @@ -0,0 +1,78 @@ +/* + * Support Power Management feature + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Author: Chenhui Zhao + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include + +#include + +#define FSL_SLEEP 0x1 +#define FSL_DEEP_SLEEP 0x2 + +/* specify the sleep state of the present platform */ +int sleep_pm_state; +/* supported sleep modes by the present platform */ +static unsigned int sleep_modes; + +static int qoriq_suspend_enter(suspend_state_t state) +{ + int ret = 0; + + switch (state) { + case PM_SUSPEND_STANDBY: + + if (cur_cpu_spec->cpu_flush_caches) + cur_cpu_spec->cpu_flush_caches(); + + ret = qoriq_pm_ops->plat_enter_state(sleep_pm_state); + + break; + + default: + ret = -EINVAL; + + } + + return ret; +} + +static int qoriq_suspend_valid(suspend_state_t state) +{ + if (state == PM_SUSPEND_STANDBY && (sleep_modes & FSL_SLEEP)) + return 1; + + return 0; +} + +static const struct platform_suspend_ops qoriq_suspend_ops = { + .valid = qoriq_suspend_valid, + .enter = qoriq_suspend_enter, +}; + +static int __init qoriq_suspend_init(void) +{ + struct device_node *np; + + sleep_modes = FSL_SLEEP; + sleep_pm_state = PLAT_PM_SLEEP; + + np = of_find_compatible_node(NULL, NULL, "fsl,qoriq-rcpm-2.0"); + if (np) + sleep_pm_state = PLAT_PM_LPM20; + + suspend_set_ops(_suspend_ops); + + return 0; +} +arch_initcall(qoriq_suspend_init); -- 1.7.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[PATCH 6/9] powerpc/85xx: support sleep feature on QorIQ SoCs with RCPM
In sleep mode, the clocks of e500 cores and unused IP blocks is turned off. The IP blocks which are allowed to wake up the processor are still running. The sleep mode is equal to the Standby state in Linux. Use the command to enter sleep mode: echo standby /sys/power/state Signed-off-by: Chenhui Zhao chenhui.z...@freescale.com --- arch/powerpc/Kconfig |4 +- arch/powerpc/platforms/85xx/Makefile |3 + arch/powerpc/platforms/85xx/qoriq_pm.c | 78 3 files changed, 83 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/platforms/85xx/qoriq_pm.c diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 05f6323..e1d6510 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -222,7 +222,7 @@ config ARCH_HIBERNATION_POSSIBLE config ARCH_SUSPEND_POSSIBLE def_bool y depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \ - (PPC_85xx !PPC_E500MC) || PPC_86xx || PPC_PSERIES \ + FSL_SOC_BOOKE || PPC_86xx || PPC_PSERIES \ || 44x || 40x config PPC_DCR_NATIVE @@ -709,7 +709,7 @@ config FSL_PCI config FSL_PMC bool default y - depends on SUSPEND (PPC_85xx || PPC_86xx) + depends on SUSPEND (PPC_85xx !PPC_E500MC || PPC_86xx) help Freescale MPC85xx/MPC86xx power management controller support (suspend/resume). For MPC83xx see platforms/83xx/suspend.c diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 25cebe7..7fae817 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -2,6 +2,9 @@ # Makefile for the PowerPC 85xx linux kernel. # obj-$(CONFIG_SMP) += smp.o +ifeq ($(CONFIG_FSL_CORENET_RCPM), y) +obj-$(CONFIG_SUSPEND) += qoriq_pm.o +endif obj-y += common.o diff --git a/arch/powerpc/platforms/85xx/qoriq_pm.c b/arch/powerpc/platforms/85xx/qoriq_pm.c new file mode 100644 index 000..915b13b --- /dev/null +++ b/arch/powerpc/platforms/85xx/qoriq_pm.c @@ -0,0 +1,78 @@ +/* + * Support Power Management feature + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Author: Chenhui Zhao chenhui.z...@freescale.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include linux/kernel.h +#include linux/suspend.h +#include linux/of_platform.h + +#include sysdev/fsl_soc.h + +#define FSL_SLEEP 0x1 +#define FSL_DEEP_SLEEP 0x2 + +/* specify the sleep state of the present platform */ +int sleep_pm_state; +/* supported sleep modes by the present platform */ +static unsigned int sleep_modes; + +static int qoriq_suspend_enter(suspend_state_t state) +{ + int ret = 0; + + switch (state) { + case PM_SUSPEND_STANDBY: + + if (cur_cpu_spec-cpu_flush_caches) + cur_cpu_spec-cpu_flush_caches(); + + ret = qoriq_pm_ops-plat_enter_state(sleep_pm_state); + + break; + + default: + ret = -EINVAL; + + } + + return ret; +} + +static int qoriq_suspend_valid(suspend_state_t state) +{ + if (state == PM_SUSPEND_STANDBY (sleep_modes FSL_SLEEP)) + return 1; + + return 0; +} + +static const struct platform_suspend_ops qoriq_suspend_ops = { + .valid = qoriq_suspend_valid, + .enter = qoriq_suspend_enter, +}; + +static int __init qoriq_suspend_init(void) +{ + struct device_node *np; + + sleep_modes = FSL_SLEEP; + sleep_pm_state = PLAT_PM_SLEEP; + + np = of_find_compatible_node(NULL, NULL, fsl,qoriq-rcpm-2.0); + if (np) + sleep_pm_state = PLAT_PM_LPM20; + + suspend_set_ops(qoriq_suspend_ops); + + return 0; +} +arch_initcall(qoriq_suspend_init); -- 1.7.3 -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/