[PATCH AUTOSEL for 4.15 013/102] ARM: dts: exynos: Correct Trats2 panel reset line

[Sasha Levin]

From: Simon Shields 

[ Upstream commit 1b377924841df1e13ab5b225be3a83f807a92b52 ]

Trats2 uses gpf2-1 as the panel reset GPIO. gpy4-5 was only used
on early revisions of the board.

Fixes: 420ae8451a22 ("ARM: dts: exynos4412-trats2: add panel node")
Signed-off-by: Simon Shields 
Acked-by: Marek Szyprowski 
Tested-by: Marek Szyprowski 
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Sasha Levin 
---
 arch/arm/boot/dts/exynos4412-trats2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts 
b/arch/arm/boot/dts/exynos4412-trats2.dts
index 220cdf109405..9f4672ba9943 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -454,7 +454,7 @@
reg = <0>;
vdd3-supply = <_vdd3_reg>;
vci-supply = <_reg>;
-   reset-gpios = < 5 GPIO_ACTIVE_HIGH>;
+   reset-gpios = < 1 GPIO_ACTIVE_HIGH>;
power-on-delay= <50>;
reset-delay = <100>;
init-delay = <100>;
-- 
2.14.1

[PATCH AUTOSEL for 4.15 013/102] ARM: dts: exynos: Correct Trats2 panel reset line

[Sasha Levin]

From: Simon Shields 

[ Upstream commit 1b377924841df1e13ab5b225be3a83f807a92b52 ]

Trats2 uses gpf2-1 as the panel reset GPIO. gpy4-5 was only used
on early revisions of the board.

Fixes: 420ae8451a22 ("ARM: dts: exynos4412-trats2: add panel node")
Signed-off-by: Simon Shields 
Acked-by: Marek Szyprowski 
Tested-by: Marek Szyprowski 
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Sasha Levin 
---
 arch/arm/boot/dts/exynos4412-trats2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts 
b/arch/arm/boot/dts/exynos4412-trats2.dts
index 220cdf109405..9f4672ba9943 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -454,7 +454,7 @@
reg = <0>;
vdd3-supply = <_vdd3_reg>;
vci-supply = <_reg>;
-   reset-gpios = < 5 GPIO_ACTIVE_HIGH>;
+   reset-gpios = < 1 GPIO_ACTIVE_HIGH>;
power-on-delay= <50>;
reset-delay = <100>;
init-delay = <100>;
-- 
2.14.1