RE: [PATCH RFC V2 3/3] Input: goodix - update dt bindings documentation (axis swapping/inversion)

2015-10-13 Thread Tirdea, Irina


> -Original Message-
> From: linux-input-ow...@vger.kernel.org 
> [mailto:linux-input-ow...@vger.kernel.org] On Behalf Of Karsten Merker
> Sent: 09 October, 2015 20:56
> To: Bastien Nocera; Dmitry Torokhov; Tirdea, Irina; Aleksei Mamlin; 
> linux-in...@vger.kernel.org; Ian Campbell
> Cc: devicet...@vger.kernel.org; linux-kernel@vger.kernel.org; Chen-Yu Tsai; 
> Karsten Merker
> Subject: [PATCH RFC V2 3/3] Input: goodix - update dt bindings documentation 
> (axis swapping/inversion)
> 
> The goodix touchscreen driver has gained support for the
> optional touchscreen-inverted-x, touchscreen-inverted-y
> and touchscreen-swapped-x-y properties as described in
> Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt.
> 
> Document these properties in the goodix bindings description.
> 
> Signed-off-by: Karsten Merker 

Reviewed-by: Irina Tirdea 

> ---
>  Documentation/devicetree/bindings/input/touchscreen/goodix.txt | 6 ++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> index 4db3393..4ecd0e1 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> @@ -14,6 +14,7 @@ Required properties:
>   - interrupts: Interrupt to which the chip is connected
>   - irq-gpio  : GPIO pin used for IRQ
>   - reset-gpio: GPIO pin used for reset
> +
>  Optional properties:
> 
>   - esd-recovery-timeout-ms : ESD poll time (in milli seconds) for the driver 
> to
> @@ -21,6 +22,11 @@ Optional properties:
>  device. ESD is disabled if this property is not 
> set
>  or is set to 0.
> 
> + - touchscreen-inverted-x  : X axis is inverted (boolean)
> + - touchscreen-inverted-y  : Y axis is inverted (boolean)
> + - touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
> + (swapping is done after inverting the axis)
> +
>  Example:
> 
>   i2c@ {
> --
> 2.1.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/


[PATCH RFC V2 3/3] Input: goodix - update dt bindings documentation (axis swapping/inversion)

2015-10-09 Thread Karsten Merker
The goodix touchscreen driver has gained support for the
optional touchscreen-inverted-x, touchscreen-inverted-y
and touchscreen-swapped-x-y properties as described in
Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt.

Document these properties in the goodix bindings description.

Signed-off-by: Karsten Merker 
---
 Documentation/devicetree/bindings/input/touchscreen/goodix.txt | 6 ++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt 
b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
index 4db3393..4ecd0e1 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
@@ -14,6 +14,7 @@ Required properties:
  - interrupts  : Interrupt to which the chip is connected
  - irq-gpio: GPIO pin used for IRQ
  - reset-gpio  : GPIO pin used for reset
+
 Optional properties:
 
  - esd-recovery-timeout-ms : ESD poll time (in milli seconds) for the driver to
@@ -21,6 +22,11 @@ Optional properties:
 device. ESD is disabled if this property is not set
 or is set to 0.
 
+ - touchscreen-inverted-x  : X axis is inverted (boolean)
+ - touchscreen-inverted-y  : Y axis is inverted (boolean)
+ - touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
+ (swapping is done after inverting the axis)
+
 Example:
 
i2c@ {
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/