Re: [PATCH V3 1/5] arm64: dts: qcom: pm7325: Add pm7325 base dts file

[Matthias Kaehlcke]

On Wed, Apr 14, 2021 at 02:04:22PM +0530, satya priya wrote:
> Add base DTS file for pm7325 along with GPIOs and temp-alarm nodes.
> 
> Signed-off-by: satya priya 

Reviewed-by: Matthias Kaehlcke 

[RESEND PATCH V3 1/5] arm64: dts: qcom: pm7325: Add pm7325 base dts file

[satya priya]

Add base DTS file for pm7325 along with GPIOs and temp-alarm nodes.

Signed-off-by: satya priya 
---
 arch/arm64/boot/dts/qcom/pm7325.dtsi | 53 
 1 file changed, 53 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm7325.dtsi

diff --git a/arch/arm64/boot/dts/qcom/pm7325.dtsi 
b/arch/arm64/boot/dts/qcom/pm7325.dtsi
new file mode 100644
index 000..e7f64a9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm7325.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2021, The Linux Foundation. All rights reserved.
+
+#include 
+#include 
+
+_bus {
+   pm7325: pmic@1 {
+   compatible = "qcom,pm7325", "qcom,spmi-pmic";
+   reg = <0x1 SPMI_USID>;
+   #address-cells = <1>;
+   #size-cells = <0>;
+
+   pm7325_temp_alarm: temp-alarm@a00 {
+   compatible = "qcom,spmi-temp-alarm";
+   reg = <0xa00>;
+   interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+   #thermal-sensor-cells = <0>;
+   };
+
+   pm7325_gpios: gpios@8800 {
+   compatible = "qcom,pm7325-gpio", "qcom,spmi-gpio";
+   reg = <0x8800>;
+   gpio-controller;
+   gpio-ranges = <_gpios 0 0 10>;
+   #gpio-cells = <2>;
+   interrupt-controller;
+   #interrupt-cells = <2>;
+   };
+   };
+};
+
+_zones {
+   pm7325_thermal: pm7325-thermal {
+   polling-delay-passive = <100>;
+   polling-delay = <0>;
+   thermal-sensors = <_temp_alarm>;
+
+   trips {
+   pm7325_trip0: trip0 {
+   temperature = <95000>;
+   hysteresis = <0>;
+   type = "passive";
+   };
+
+   pm7325_crit: pm7325-crit {
+   temperature = <115000>;
+   hysteresis = <0>;
+   type = "critical";
+   };
+   };
+   };
+};
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH V3 1/5] arm64: dts: qcom: pm7325: Add pm7325 base dts file

[satya priya]

Add base DTS file for pm7325 along with GPIOs and temp-alarm nodes.

Signed-off-by: satya priya 
---
 arch/arm64/boot/dts/qcom/pm7325.dtsi | 53 
 1 file changed, 53 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm7325.dtsi

diff --git a/arch/arm64/boot/dts/qcom/pm7325.dtsi 
b/arch/arm64/boot/dts/qcom/pm7325.dtsi
new file mode 100644
index 000..e7f64a9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm7325.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2021, The Linux Foundation. All rights reserved.
+
+#include 
+#include 
+
+_bus {
+   pm7325: pmic@1 {
+   compatible = "qcom,pm7325", "qcom,spmi-pmic";
+   reg = <0x1 SPMI_USID>;
+   #address-cells = <1>;
+   #size-cells = <0>;
+
+   pm7325_temp_alarm: temp-alarm@a00 {
+   compatible = "qcom,spmi-temp-alarm";
+   reg = <0xa00>;
+   interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+   #thermal-sensor-cells = <0>;
+   };
+
+   pm7325_gpios: gpios@8800 {
+   compatible = "qcom,pm7325-gpio", "qcom,spmi-gpio";
+   reg = <0x8800>;
+   gpio-controller;
+   gpio-ranges = <_gpios 0 0 10>;
+   #gpio-cells = <2>;
+   interrupt-controller;
+   #interrupt-cells = <2>;
+   };
+   };
+};
+
+_zones {
+   pm7325_thermal: pm7325-thermal {
+   polling-delay-passive = <100>;
+   polling-delay = <0>;
+   thermal-sensors = <_temp_alarm>;
+
+   trips {
+   pm7325_trip0: trip0 {
+   temperature = <95000>;
+   hysteresis = <0>;
+   type = "passive";
+   };
+
+   pm7325_crit: pm7325-crit {
+   temperature = <115000>;
+   hysteresis = <0>;
+   type = "critical";
+   };
+   };
+   };
+};
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation