Re: [PATCH V3 2/2] PCI: dwc: Add support to configure for ECRC
On 11/4/2020 9:52 PM, Bjorn Helgaas wrote: External email: Use caution opening links or attachments On Wed, Nov 04, 2020 at 05:13:07PM +0530, Vidya Sagar wrote: On 11/4/2020 2:37 AM, Bjorn Helgaas wrote: On Tue, Nov 03, 2020 at 08:57:01AM +0530, Vidya Sagar wrote: On 11/3/2020 4:32 AM, Bjorn Helgaas wrote: On Thu, Oct 29, 2020 at 11:09:59AM +0530, Vidya Sagar wrote: DesignWare core has a TLP digest (TD) override bit in one of the control registers of ATU. This bit also needs to be programmed for proper ECRC functionality. This is currently identified as an issue with DesignWare IP version 4.90a. This patch does the required programming in ATU upon querying the system policy for ECRC. I guess this is a hardware defect, right? Yes. This is common across all DWC implementations (version 4.90 precisely) How much of a problem would it be if we instead added a "no_ecrc" quirk for this hardware so we never enabled ECRC? Well, on Tegra for some of the high fidelity use cases, ECRC is required to be turned on and if it can be done safely with these patches, why shouldn't we not enable ECRC at all? IIUC, the current Linux support of ECRC is a single choice at boot-time: by default ECRC is not enabled, but if you boot with "pci=ecrc=on", we turn on ECRC for every device. That seems like the minimal support, but I think the spec allows ECRC to be enabled selectively, on individual devices. I can imagine a sysfs knob that would allow us to enable/disable ECRC per-device at run-time. If we had such a sysfs knob, it would be pretty ugly and maybe impractical to work around this hardware issue. So I'm a little bit hesitant to add functionality that might have to be removed in the future. Agree with this. But since it is a boot-time choice at this point, I think we can still go ahead with this approach to have a working ECRC mechanism right? I don't see any sysfs knob for AER controlling at this point. I don't want to do anything that will prevent us from adding per-device ECRC control in the future. My concern is that if we add a run-time sysfs knob in the future, the user experience on this hardware will be poor because there's no convenient path to twiddle the PCIE_ATU_TD bit when the generic code changes the AER Control bit. Agree. Can we add it to the documentation that run time changing of ECRC settings are not supported on this (i.e. Tegra194) platform (or for that matter on any SoC with PCIe based on DesignWare core version 4.90A). By 'not supported', I meant that the ECRC digest part may not work but the normal functionality will continue to work without reporting any AER errors. I tried to emulate the following scenarios on Tegra194 silicon and here are my observations. FWIW, I'm referring to the PCIe spec Rev 5.0 Ver 1.0 (22 May 2019) What is the failure mode in these scenarios: - User boots with defaults, ECRC is disabled. - User enables ECRC via sysfs. - What happens here? ECRC is enabled via AER Control but not via DWC TD bit. I assume ECRC doesn't work. Does it cause PCIe errors (malformed TLP, etc)? Since DWC TD bit is not programmed, for all the transactions that go through ATU, TLP Digest won't get generated (although AER registers indicate that ECRC should get generated). As per the spec section "2.7.1 ECRC Rules" --- If a device Function is enabled to generate ECRC, it must calculate and apply ECRC for all TLPs originated by the Function --- So the RP would be violating the PCIe spec, but it doesn't result in any error because the same section has the following rule as well --- If a device Function is enabled to check ECRC, it must do so for all TLPs with ECRC where the device is the ultimate PCI Express Receiver Note that it is still possible for the Function to receive TLPs without ECRC, and these are processed normally - this is not an error --- so, even if the EP has ECRC check enabled, because of the above rule, it just processes those packets without ECRC as normal packets. Basically, whoever is enabling ECRC run time gets cheated as transactions routed through ATU don't really have ECRC digest Or this one: - User boots with "pci=ecrc=on", ECRC is enabled. - ECRC works fine. - User disables ECRC via sysfs. - What happens here? ECRC is disabled via AER Control, but DWC TD bit thinks it's still enabled. In this case, the EP doesn't have ECRC check enabled but receives TLPs with ECRC digest. This again won't result in any error because of the section "2.2.3 TLP Digest Rules" which says --- If an intermediate or ultimate PCI Express Receiver of the TLP does not support ECRC checking, the Receiver must ignore the TLP Digest --- So the EP just ignores the TLP Digest and process the TLP normally. Although functionality wise there is no issue here, there could be some impact on the perf because of the extra DWord data. This is again debatable as the perf/data path is typically from EP's DMA engine to
Re: [PATCH V3 2/2] PCI: dwc: Add support to configure for ECRC
On Wed, Nov 04, 2020 at 05:13:07PM +0530, Vidya Sagar wrote: > On 11/4/2020 2:37 AM, Bjorn Helgaas wrote: > > On Tue, Nov 03, 2020 at 08:57:01AM +0530, Vidya Sagar wrote: > > > On 11/3/2020 4:32 AM, Bjorn Helgaas wrote: > > > > On Thu, Oct 29, 2020 at 11:09:59AM +0530, Vidya Sagar wrote: > > > > > DesignWare core has a TLP digest (TD) override bit in one of the > > > > > control > > > > > registers of ATU. This bit also needs to be programmed for proper ECRC > > > > > functionality. This is currently identified as an issue with > > > > > DesignWare > > > > > IP version 4.90a. This patch does the required programming in ATU upon > > > > > querying the system policy for ECRC. > > > > > > > > I guess this is a hardware defect, right? > > > Yes. This is common across all DWC implementations (version 4.90 > > > precisely) > > > > > > > How much of a problem would it be if we instead added a "no_ecrc" > > > > quirk for this hardware so we never enabled ECRC? > > > Well, on Tegra for some of the high fidelity use cases, ECRC is required > > > to > > > be turned on and if it can be done safely with these patches, why > > > shouldn't > > > we not enable ECRC at all? > > > > > > > IIUC, the current Linux support of ECRC is a single choice at > > > > boot-time: by default ECRC is not enabled, but if you boot with > > > > "pci=ecrc=on", we turn on ECRC for every device. > > > > > > > > That seems like the minimal support, but I think the spec allows ECRC > > > > to be enabled selectively, on individual devices. I can imagine a > > > > sysfs knob that would allow us to enable/disable ECRC per-device at > > > > run-time. > > > > > > > > If we had such a sysfs knob, it would be pretty ugly and maybe > > > > impractical to work around this hardware issue. So I'm a little bit > > > > hesitant to add functionality that might have to be removed in the > > > > future. > > > > > > Agree with this. But since it is a boot-time choice at this point, I think > > > we can still go ahead with this approach to have a working ECRC mechanism > > > right? I don't see any sysfs knob for AER controlling at this point. > > > > I don't want to do anything that will prevent us from adding > > per-device ECRC control in the future. > > > > My concern is that if we add a run-time sysfs knob in the future, the > > user experience on this hardware will be poor because there's no > > convenient path to twiddle the PCIE_ATU_TD bit when the generic code > > changes the AER Control bit. > > Agree. > Can we add it to the documentation that run time changing of ECRC settings > are not supported on this (i.e. Tegra194) platform (or for that matter on > any SoC with PCIe based on DesignWare core version 4.90A). By 'not > supported', I meant that the ECRC digest part may not work but the normal > functionality will continue to work without reporting any AER errors. I > tried to emulate the following scenarios on Tegra194 silicon and here are my > observations. > FWIW, I'm referring to the PCIe spec Rev 5.0 Ver 1.0 (22 May 2019) > > > What is the failure mode in these scenarios: > > > >- User boots with defaults, ECRC is disabled. > >- User enables ECRC via sysfs. > >- What happens here? ECRC is enabled via AER Control but not via > > DWC TD bit. I assume ECRC doesn't work. Does it cause PCIe > > errors (malformed TLP, etc)? > > Since DWC TD bit is not programmed, for all the transactions that go through > ATU, TLP Digest won't get generated (although AER registers indicate that > ECRC should get generated). > As per the spec section "2.7.1 ECRC Rules" > > --- > If a device Function is enabled to generate ECRC, it must calculate and > apply ECRC for all TLPs originated by the Function > --- > > So the RP would be violating the PCIe spec, but it doesn't result in any > error because the same section has the following rule as well > > --- > If a device Function is enabled to check ECRC, it must do so for all TLPs > with ECRC where the device is the ultimate PCI Express Receiver > Note that it is still possible for the Function to receive TLPs without > ECRC, and these are processed normally - this is not an error > --- > > so, even if the EP has ECRC check enabled, because of the above rule, it > just processes those packets without ECRC as normal packets. > Basically, whoever is enabling ECRC run time gets cheated as transactions > routed through ATU don't really have ECRC digest > > > Or this one: > > > >- User boots with "pci=ecrc=on", ECRC is enabled. > >- ECRC works fine. > >- User disables ECRC via sysfs. > >- What happens here? ECRC is disabled via AER Control, but DWC TD > > bit thinks it's still enabled. > > In this case, the EP doesn't have ECRC check enabled but receives TLPs with > ECRC digest. This again won't result in any error because of the section > "2.2.3 TLP Digest Rules" which says > > --- > If an intermediate or ultimate PCI Express Receiver of the TLP does
Re: [PATCH V3 2/2] PCI: dwc: Add support to configure for ECRC
On 11/4/2020 2:37 AM, Bjorn Helgaas wrote: External email: Use caution opening links or attachments On Tue, Nov 03, 2020 at 08:57:01AM +0530, Vidya Sagar wrote: On 11/3/2020 4:32 AM, Bjorn Helgaas wrote: On Thu, Oct 29, 2020 at 11:09:59AM +0530, Vidya Sagar wrote: DesignWare core has a TLP digest (TD) override bit in one of the control registers of ATU. This bit also needs to be programmed for proper ECRC functionality. This is currently identified as an issue with DesignWare IP version 4.90a. This patch does the required programming in ATU upon querying the system policy for ECRC. I guess this is a hardware defect, right? Yes. This is common across all DWC implementations (version 4.90 precisely) How much of a problem would it be if we instead added a "no_ecrc" quirk for this hardware so we never enabled ECRC? Well, on Tegra for some of the high fidelity use cases, ECRC is required to be turned on and if it can be done safely with these patches, why shouldn't we not enable ECRC at all? IIUC, the current Linux support of ECRC is a single choice at boot-time: by default ECRC is not enabled, but if you boot with "pci=ecrc=on", we turn on ECRC for every device. That seems like the minimal support, but I think the spec allows ECRC to be enabled selectively, on individual devices. I can imagine a sysfs knob that would allow us to enable/disable ECRC per-device at run-time. If we had such a sysfs knob, it would be pretty ugly and maybe impractical to work around this hardware issue. So I'm a little bit hesitant to add functionality that might have to be removed in the future. Agree with this. But since it is a boot-time choice at this point, I think we can still go ahead with this approach to have a working ECRC mechanism right? I don't see any sysfs knob for AER controlling at this point. I don't want to do anything that will prevent us from adding per-device ECRC control in the future. My concern is that if we add a run-time sysfs knob in the future, the user experience on this hardware will be poor because there's no convenient path to twiddle the PCIE_ATU_TD bit when the generic code changes the AER Control bit. Agree. Can we add it to the documentation that run time changing of ECRC settings are not supported on this (i.e. Tegra194) platform (or for that matter on any SoC with PCIe based on DesignWare core version 4.90A). By 'not supported', I meant that the ECRC digest part may not work but the normal functionality will continue to work without reporting any AER errors. I tried to emulate the following scenarios on Tegra194 silicon and here are my observations. FWIW, I'm referring to the PCIe spec Rev 5.0 Ver 1.0 (22 May 2019) What is the failure mode in these scenarios: - User boots with defaults, ECRC is disabled. - User enables ECRC via sysfs. - What happens here? ECRC is enabled via AER Control but not via DWC TD bit. I assume ECRC doesn't work. Does it cause PCIe errors (malformed TLP, etc)? Since DWC TD bit is not programmed, for all the transactions that go through ATU, TLP Digest won't get generated (although AER registers indicate that ECRC should get generated). As per the spec section "2.7.1 ECRC Rules" --- If a device Function is enabled to generate ECRC, it must calculate and apply ECRC for all TLPs originated by the Function --- So the RP would be violating the PCIe spec, but it doesn't result in any error because the same section has the following rule as well --- If a device Function is enabled to check ECRC, it must do so for all TLPs with ECRC where the device is the ultimate PCI Express Receiver Note that it is still possible for the Function to receive TLPs without ECRC, and these are processed normally - this is not an error --- so, even if the EP has ECRC check enabled, because of the above rule, it just processes those packets without ECRC as normal packets. Basically, whoever is enabling ECRC run time gets cheated as transactions routed through ATU don't really have ECRC digest Or this one: - User boots with "pci=ecrc=on", ECRC is enabled. - ECRC works fine. - User disables ECRC via sysfs. - What happens here? ECRC is disabled via AER Control, but DWC TD bit thinks it's still enabled. In this case, the EP doesn't have ECRC check enabled but receives TLPs with ECRC digest. This again won't result in any error because of the section "2.2.3 TLP Digest Rules" which says --- If an intermediate or ultimate PCI Express Receiver of the TLP does not support ECRC checking, the Receiver must ignore the TLP Digest --- So the EP just ignores the TLP Digest and process the TLP normally. Although functionality wise there is no issue here, there could be some impact on the perf because of the extra DWord data. This is again debatable as the perf/data path is typically from EP's DMA engine to host system memory and not config/BAR accesses. If you enabled ECRC unconditionally on DWC and
Re: [PATCH V3 2/2] PCI: dwc: Add support to configure for ECRC
On Tue, Nov 03, 2020 at 08:57:01AM +0530, Vidya Sagar wrote: > On 11/3/2020 4:32 AM, Bjorn Helgaas wrote: > > On Thu, Oct 29, 2020 at 11:09:59AM +0530, Vidya Sagar wrote: > > > DesignWare core has a TLP digest (TD) override bit in one of the control > > > registers of ATU. This bit also needs to be programmed for proper ECRC > > > functionality. This is currently identified as an issue with DesignWare > > > IP version 4.90a. This patch does the required programming in ATU upon > > > querying the system policy for ECRC. > > > > I guess this is a hardware defect, right? > Yes. This is common across all DWC implementations (version 4.90 precisely) > > > How much of a problem would it be if we instead added a "no_ecrc" > > quirk for this hardware so we never enabled ECRC? > Well, on Tegra for some of the high fidelity use cases, ECRC is required to > be turned on and if it can be done safely with these patches, why shouldn't > we not enable ECRC at all? > > > IIUC, the current Linux support of ECRC is a single choice at > > boot-time: by default ECRC is not enabled, but if you boot with > > "pci=ecrc=on", we turn on ECRC for every device. > > > > That seems like the minimal support, but I think the spec allows ECRC > > to be enabled selectively, on individual devices. I can imagine a > > sysfs knob that would allow us to enable/disable ECRC per-device at > > run-time. > > > > If we had such a sysfs knob, it would be pretty ugly and maybe > > impractical to work around this hardware issue. So I'm a little bit > > hesitant to add functionality that might have to be removed in the > > future. > > Agree with this. But since it is a boot-time choice at this point, I think > we can still go ahead with this approach to have a working ECRC mechanism > right? I don't see any sysfs knob for AER controlling at this point. I don't want to do anything that will prevent us from adding per-device ECRC control in the future. My concern is that if we add a run-time sysfs knob in the future, the user experience on this hardware will be poor because there's no convenient path to twiddle the PCIE_ATU_TD bit when the generic code changes the AER Control bit. What is the failure mode in these scenarios: - User boots with defaults, ECRC is disabled. - User enables ECRC via sysfs. - What happens here? ECRC is enabled via AER Control but not via DWC TD bit. I assume ECRC doesn't work. Does it cause PCIe errors (malformed TLP, etc)? Or this one: - User boots with "pci=ecrc=on", ECRC is enabled. - ECRC works fine. - User disables ECRC via sysfs. - What happens here? ECRC is disabled via AER Control, but DWC TD bit thinks it's still enabled. If you enabled ECRC unconditionally on DWC and the sysfs knob had no effect, I'd be OK with that. I'm more worried about what happens when the AER bit and the DWC TD bit are set so they don't match. What is the failure mode there? > > > Signed-off-by: Vidya Sagar > > > Reviewed-by: Jingoo Han > > > --- > > > V3: > > > * Added 'Reviewed-by: Jingoo Han ' > > > > > > V2: > > > * Addressed Jingoo's review comment > > > * Removed saving 'td' bit information in 'dw_pcie' structure > > > > > > drivers/pci/controller/dwc/pcie-designware.c | 8 ++-- > > > drivers/pci/controller/dwc/pcie-designware.h | 1 + > > > 2 files changed, 7 insertions(+), 2 deletions(-) > > > > > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c > > > b/drivers/pci/controller/dwc/pcie-designware.c > > > index b5e438b70cd5..cbd651b219d2 100644 > > > --- a/drivers/pci/controller/dwc/pcie-designware.c > > > +++ b/drivers/pci/controller/dwc/pcie-designware.c > > > @@ -246,6 +246,8 @@ static void dw_pcie_prog_outbound_atu_unroll(struct > > > dw_pcie *pci, u8 func_no, > > >dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET, > > > upper_32_bits(pci_addr)); > > >val = type | PCIE_ATU_FUNC_NUM(func_no); > > > + if (pci->version == 0x490A) > > > + val = val | pcie_is_ecrc_enabled() << PCIE_ATU_TD_SHIFT; > > >val = upper_32_bits(size - 1) ? > > >val | PCIE_ATU_INCREASE_REGION_SIZE : val; > > >dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, > > > val); > > > @@ -294,8 +296,10 @@ static void __dw_pcie_prog_outbound_atu(struct > > > dw_pcie *pci, u8 func_no, > > > lower_32_bits(pci_addr)); > > >dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, > > > upper_32_bits(pci_addr)); > > > - dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type | > > > -PCIE_ATU_FUNC_NUM(func_no)); > > > + val = type | PCIE_ATU_FUNC_NUM(func_no); > > > + if (pci->version == 0x490A) > > > + val = val | pcie_is_ecrc_enabled() << PCIE_ATU_TD_SHIFT; > > > + dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val); > > >dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE); > > > > > >
Re: [PATCH V3 2/2] PCI: dwc: Add support to configure for ECRC
On Mon, Nov 2, 2020 at 4:38 PM Gustavo Pimentel wrote: > > On Mon, Nov 2, 2020 at 21:16:52, Rob Herring wrote: > > > On Mon, Nov 2, 2020 at 9:12 AM Gustavo Pimentel > > wrote: > > > > > > On Mon, Nov 2, 2020 at 14:27:9, Vidya Sagar wrote: > > > > > > > > > > > > > > > On 11/2/2020 7:45 PM, Rob Herring wrote: > > > > > External email: Use caution opening links or attachments > > > > > > > > > > > > > > > On Thu, Oct 29, 2020 at 12:40 AM Vidya Sagar > > > > > wrote: > > > > >> > > > > >> DesignWare core has a TLP digest (TD) override bit in one of the > > > > >> control > > > > >> registers of ATU. This bit also needs to be programmed for proper > > > > >> ECRC > > > > >> functionality. This is currently identified as an issue with > > > > >> DesignWare > > > > >> IP version 4.90a. This patch does the required programming in ATU > > > > >> upon > > > > >> querying the system policy for ECRC. > > > > >> > > > > >> Signed-off-by: Vidya Sagar > > > > >> Reviewed-by: Jingoo Han > > > > >> --- > > > > >> V3: > > > > >> * Added 'Reviewed-by: Jingoo Han ' > > > > >> > > > > >> V2: > > > > >> * Addressed Jingoo's review comment > > > > >> * Removed saving 'td' bit information in 'dw_pcie' structure > > > > >> > > > > >> drivers/pci/controller/dwc/pcie-designware.c | 8 ++-- > > > > >> drivers/pci/controller/dwc/pcie-designware.h | 1 + > > > > >> 2 files changed, 7 insertions(+), 2 deletions(-) > > > > >> > > > > >> diff --git a/drivers/pci/controller/dwc/pcie-designware.c > > > > >> b/drivers/pci/controller/dwc/pcie-designware.c > > > > >> index b5e438b70cd5..cbd651b219d2 100644 > > > > >> --- a/drivers/pci/controller/dwc/pcie-designware.c > > > > >> +++ b/drivers/pci/controller/dwc/pcie-designware.c > > > > >> @@ -246,6 +246,8 @@ static void > > > > >> dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, u8 func_no, > > > > >> dw_pcie_writel_ob_unroll(pci, index, > > > > >> PCIE_ATU_UNR_UPPER_TARGET, > > > > >> upper_32_bits(pci_addr)); > > > > >> val = type | PCIE_ATU_FUNC_NUM(func_no); > > > > >> + if (pci->version == 0x490A) > > > > >> + val = val | pcie_is_ecrc_enabled() << > > > > >> PCIE_ATU_TD_SHIFT; > > > > >> val = upper_32_bits(size - 1) ? > > > > >> val | PCIE_ATU_INCREASE_REGION_SIZE : val; > > > > >> dw_pcie_writel_ob_unroll(pci, index, > > > > >> PCIE_ATU_UNR_REGION_CTRL1, val); > > > > >> @@ -294,8 +296,10 @@ static void __dw_pcie_prog_outbound_atu(struct > > > > >> dw_pcie *pci, u8 func_no, > > > > >> lower_32_bits(pci_addr)); > > > > >> dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, > > > > >> upper_32_bits(pci_addr)); > > > > >> - dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type | > > > > >> - PCIE_ATU_FUNC_NUM(func_no)); > > > > >> + val = type | PCIE_ATU_FUNC_NUM(func_no); > > > > >> + if (pci->version == 0x490A) > > > > > > > > > > Is this even possible? Are the non-unroll ATU registers available > > > > > post 4.80? > > > > I'm not sure. Gustavo might have information about this. I made this > > > > change so that it is taken care off even if they available. > > > > > > The Synopsys DesignWare PCIe IP is highly configurable, therefore is > > > dependable on what the design team has configured for their solution. > > > Although Synopsys doesn't recommend the use of non-unroll ATU, the > > > customers are free to select what they want for their design. Then given the feature is not really tied to the IP version, using version wasn't really a good choice. A better choice would have been a quirk flag that platforms could set. Perhaps called 'iatu_unroll_enabled'... > > Okay, then there's a bug in the driver if the version is set to 0x480A > > or later and non-unroll is used: > > > > if (pci->version >= 0x480A || (!pci->version && > >dw_pcie_iatu_unroll_enabled(pci))) { > > > > Probably can just drop the version checking. The detection should always > > work. > > Hi Rob, > > The "detection" is based on the assumption that the read value on > PCIE_ATU_VIEWPORT register is 0x (which is a hard-coded value by > design), if it's true then the iATU is unrolled and the function returns > 1, otherwise is non-unrolled returns 0. So like you said it should always > work, however, this code behavior was changed by Kishon on the following > patch 2aadcb0cd39 ("PCI: dwc: Fix ATU identification for designware > version >= 4.80"). His patch makes me believe that on keystone platform > the read operation on that register causes some unpredicted behavior > leads his platform to crash/abort, that's why he created this alternative > version approach to avoid the "detection" algorithm. Ah, h/w designers and their love for bus aborts... > From what I'm seeing the only drivers that use this "version" approach > are the keystone and intel-gw (which probably doesn't
Re: [PATCH V3 2/2] PCI: dwc: Add support to configure for ECRC
On 11/3/2020 4:32 AM, Bjorn Helgaas wrote: External email: Use caution opening links or attachments On Thu, Oct 29, 2020 at 11:09:59AM +0530, Vidya Sagar wrote: DesignWare core has a TLP digest (TD) override bit in one of the control registers of ATU. This bit also needs to be programmed for proper ECRC functionality. This is currently identified as an issue with DesignWare IP version 4.90a. This patch does the required programming in ATU upon querying the system policy for ECRC. I guess this is a hardware defect, right? Yes. This is common across all DWC implementations (version 4.90 precisely) How much of a problem would it be if we instead added a "no_ecrc" quirk for this hardware so we never enabled ECRC? Well, on Tegra for some of the high fidelity use cases, ECRC is required to be turned on and if it can be done safely with these patches, why shouldn't we not enable ECRC at all? IIUC, the current Linux support of ECRC is a single choice at boot-time: by default ECRC is not enabled, but if you boot with "pci=ecrc=on", we turn on ECRC for every device. That seems like the minimal support, but I think the spec allows ECRC to be enabled selectively, on individual devices. I can imagine a sysfs knob that would allow us to enable/disable ECRC per-device at run-time. If we had such a sysfs knob, it would be pretty ugly and maybe impractical to work around this hardware issue. So I'm a little bit hesitant to add functionality that might have to be removed in the future. Agree with this. But since it is a boot-time choice at this point, I think we can still go ahead with this approach to have a working ECRC mechanism right? I don't see any sysfs knob for AER controlling at this point. Signed-off-by: Vidya Sagar Reviewed-by: Jingoo Han --- V3: * Added 'Reviewed-by: Jingoo Han ' V2: * Addressed Jingoo's review comment * Removed saving 'td' bit information in 'dw_pcie' structure drivers/pci/controller/dwc/pcie-designware.c | 8 ++-- drivers/pci/controller/dwc/pcie-designware.h | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index b5e438b70cd5..cbd651b219d2 100644 --- a/drivers/pci/controller/dwc/pcie-designware.c +++ b/drivers/pci/controller/dwc/pcie-designware.c @@ -246,6 +246,8 @@ static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, u8 func_no, dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET, upper_32_bits(pci_addr)); val = type | PCIE_ATU_FUNC_NUM(func_no); + if (pci->version == 0x490A) + val = val | pcie_is_ecrc_enabled() << PCIE_ATU_TD_SHIFT; val = upper_32_bits(size - 1) ? val | PCIE_ATU_INCREASE_REGION_SIZE : val; dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, val); @@ -294,8 +296,10 @@ static void __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, lower_32_bits(pci_addr)); dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, upper_32_bits(pci_addr)); - dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type | -PCIE_ATU_FUNC_NUM(func_no)); + val = type | PCIE_ATU_FUNC_NUM(func_no); + if (pci->version == 0x490A) + val = val | pcie_is_ecrc_enabled() << PCIE_ATU_TD_SHIFT; + dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val); dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE); /* diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index e7f441441db2..b01ef407fd52 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -89,6 +89,7 @@ #define PCIE_ATU_TYPE_IO 0x2 #define PCIE_ATU_TYPE_CFG0 0x4 #define PCIE_ATU_TYPE_CFG1 0x5 +#define PCIE_ATU_TD_SHIFT8 #define PCIE_ATU_FUNC_NUM(pf) ((pf) << 20) #define PCIE_ATU_CR2 0x908 #define PCIE_ATU_ENABLE BIT(31) -- 2.17.1
Re: [PATCH V3 2/2] PCI: dwc: Add support to configure for ECRC
On Thu, Oct 29, 2020 at 11:09:59AM +0530, Vidya Sagar wrote: > DesignWare core has a TLP digest (TD) override bit in one of the control > registers of ATU. This bit also needs to be programmed for proper ECRC > functionality. This is currently identified as an issue with DesignWare > IP version 4.90a. This patch does the required programming in ATU upon > querying the system policy for ECRC. I guess this is a hardware defect, right? How much of a problem would it be if we instead added a "no_ecrc" quirk for this hardware so we never enabled ECRC? IIUC, the current Linux support of ECRC is a single choice at boot-time: by default ECRC is not enabled, but if you boot with "pci=ecrc=on", we turn on ECRC for every device. That seems like the minimal support, but I think the spec allows ECRC to be enabled selectively, on individual devices. I can imagine a sysfs knob that would allow us to enable/disable ECRC per-device at run-time. If we had such a sysfs knob, it would be pretty ugly and maybe impractical to work around this hardware issue. So I'm a little bit hesitant to add functionality that might have to be removed in the future. > Signed-off-by: Vidya Sagar > Reviewed-by: Jingoo Han > --- > V3: > * Added 'Reviewed-by: Jingoo Han ' > > V2: > * Addressed Jingoo's review comment > * Removed saving 'td' bit information in 'dw_pcie' structure > > drivers/pci/controller/dwc/pcie-designware.c | 8 ++-- > drivers/pci/controller/dwc/pcie-designware.h | 1 + > 2 files changed, 7 insertions(+), 2 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c > b/drivers/pci/controller/dwc/pcie-designware.c > index b5e438b70cd5..cbd651b219d2 100644 > --- a/drivers/pci/controller/dwc/pcie-designware.c > +++ b/drivers/pci/controller/dwc/pcie-designware.c > @@ -246,6 +246,8 @@ static void dw_pcie_prog_outbound_atu_unroll(struct > dw_pcie *pci, u8 func_no, > dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET, >upper_32_bits(pci_addr)); > val = type | PCIE_ATU_FUNC_NUM(func_no); > + if (pci->version == 0x490A) > + val = val | pcie_is_ecrc_enabled() << PCIE_ATU_TD_SHIFT; > val = upper_32_bits(size - 1) ? > val | PCIE_ATU_INCREASE_REGION_SIZE : val; > dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, val); > @@ -294,8 +296,10 @@ static void __dw_pcie_prog_outbound_atu(struct dw_pcie > *pci, u8 func_no, > lower_32_bits(pci_addr)); > dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, > upper_32_bits(pci_addr)); > - dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type | > -PCIE_ATU_FUNC_NUM(func_no)); > + val = type | PCIE_ATU_FUNC_NUM(func_no); > + if (pci->version == 0x490A) > + val = val | pcie_is_ecrc_enabled() << PCIE_ATU_TD_SHIFT; > + dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val); > dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE); > > /* > diff --git a/drivers/pci/controller/dwc/pcie-designware.h > b/drivers/pci/controller/dwc/pcie-designware.h > index e7f441441db2..b01ef407fd52 100644 > --- a/drivers/pci/controller/dwc/pcie-designware.h > +++ b/drivers/pci/controller/dwc/pcie-designware.h > @@ -89,6 +89,7 @@ > #define PCIE_ATU_TYPE_IO 0x2 > #define PCIE_ATU_TYPE_CFG0 0x4 > #define PCIE_ATU_TYPE_CFG1 0x5 > +#define PCIE_ATU_TD_SHIFT8 > #define PCIE_ATU_FUNC_NUM(pf) ((pf) << 20) > #define PCIE_ATU_CR2 0x908 > #define PCIE_ATU_ENABLE BIT(31) > -- > 2.17.1 >
RE: [PATCH V3 2/2] PCI: dwc: Add support to configure for ECRC
On Mon, Nov 2, 2020 at 21:16:52, Rob Herring wrote: > On Mon, Nov 2, 2020 at 9:12 AM Gustavo Pimentel > wrote: > > > > On Mon, Nov 2, 2020 at 14:27:9, Vidya Sagar wrote: > > > > > > > > > > > On 11/2/2020 7:45 PM, Rob Herring wrote: > > > > External email: Use caution opening links or attachments > > > > > > > > > > > > On Thu, Oct 29, 2020 at 12:40 AM Vidya Sagar wrote: > > > >> > > > >> DesignWare core has a TLP digest (TD) override bit in one of the > > > >> control > > > >> registers of ATU. This bit also needs to be programmed for proper ECRC > > > >> functionality. This is currently identified as an issue with DesignWare > > > >> IP version 4.90a. This patch does the required programming in ATU upon > > > >> querying the system policy for ECRC. > > > >> > > > >> Signed-off-by: Vidya Sagar > > > >> Reviewed-by: Jingoo Han > > > >> --- > > > >> V3: > > > >> * Added 'Reviewed-by: Jingoo Han ' > > > >> > > > >> V2: > > > >> * Addressed Jingoo's review comment > > > >> * Removed saving 'td' bit information in 'dw_pcie' structure > > > >> > > > >> drivers/pci/controller/dwc/pcie-designware.c | 8 ++-- > > > >> drivers/pci/controller/dwc/pcie-designware.h | 1 + > > > >> 2 files changed, 7 insertions(+), 2 deletions(-) > > > >> > > > >> diff --git a/drivers/pci/controller/dwc/pcie-designware.c > > > >> b/drivers/pci/controller/dwc/pcie-designware.c > > > >> index b5e438b70cd5..cbd651b219d2 100644 > > > >> --- a/drivers/pci/controller/dwc/pcie-designware.c > > > >> +++ b/drivers/pci/controller/dwc/pcie-designware.c > > > >> @@ -246,6 +246,8 @@ static void > > > >> dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, u8 func_no, > > > >> dw_pcie_writel_ob_unroll(pci, index, > > > >> PCIE_ATU_UNR_UPPER_TARGET, > > > >> upper_32_bits(pci_addr)); > > > >> val = type | PCIE_ATU_FUNC_NUM(func_no); > > > >> + if (pci->version == 0x490A) > > > >> + val = val | pcie_is_ecrc_enabled() << > > > >> PCIE_ATU_TD_SHIFT; > > > >> val = upper_32_bits(size - 1) ? > > > >> val | PCIE_ATU_INCREASE_REGION_SIZE : val; > > > >> dw_pcie_writel_ob_unroll(pci, index, > > > >> PCIE_ATU_UNR_REGION_CTRL1, val); > > > >> @@ -294,8 +296,10 @@ static void __dw_pcie_prog_outbound_atu(struct > > > >> dw_pcie *pci, u8 func_no, > > > >> lower_32_bits(pci_addr)); > > > >> dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, > > > >> upper_32_bits(pci_addr)); > > > >> - dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type | > > > >> - PCIE_ATU_FUNC_NUM(func_no)); > > > >> + val = type | PCIE_ATU_FUNC_NUM(func_no); > > > >> + if (pci->version == 0x490A) > > > > > > > > Is this even possible? Are the non-unroll ATU registers available post > > > > 4.80? > > > I'm not sure. Gustavo might have information about this. I made this > > > change so that it is taken care off even if they available. > > > > The Synopsys DesignWare PCIe IP is highly configurable, therefore is > > dependable on what the design team has configured for their solution. > > Although Synopsys doesn't recommend the use of non-unroll ATU, the > > customers are free to select what they want for their design. > > Okay, then there's a bug in the driver if the version is set to 0x480A > or later and non-unroll is used: > > if (pci->version >= 0x480A || (!pci->version && >dw_pcie_iatu_unroll_enabled(pci))) { > > Probably can just drop the version checking. The detection should always work. Hi Rob, The "detection" is based on the assumption that the read value on PCIE_ATU_VIEWPORT register is 0x (which is a hard-coded value by design), if it's true then the iATU is unrolled and the function returns 1, otherwise is non-unrolled returns 0. So like you said it should always work, however, this code behavior was changed by Kishon on the following patch 2aadcb0cd39 ("PCI: dwc: Fix ATU identification for designware version >= 4.80"). His patch makes me believe that on keystone platform the read operation on that register causes some unpredicted behavior leads his platform to crash/abort, that's why he created this alternative version approach to avoid the "detection" algorithm. From what I'm seeing the only drivers that use this "version" approach are the keystone and intel-gw (which probably doesn't need it). To summarize, this is a workaround so that the keystone driver doesn't break independent of the controller IP version. -Gustavo > > Rob
Re: [PATCH V3 2/2] PCI: dwc: Add support to configure for ECRC
On Mon, Nov 2, 2020 at 9:12 AM Gustavo Pimentel wrote: > > On Mon, Nov 2, 2020 at 14:27:9, Vidya Sagar wrote: > > > > > > > On 11/2/2020 7:45 PM, Rob Herring wrote: > > > External email: Use caution opening links or attachments > > > > > > > > > On Thu, Oct 29, 2020 at 12:40 AM Vidya Sagar wrote: > > >> > > >> DesignWare core has a TLP digest (TD) override bit in one of the control > > >> registers of ATU. This bit also needs to be programmed for proper ECRC > > >> functionality. This is currently identified as an issue with DesignWare > > >> IP version 4.90a. This patch does the required programming in ATU upon > > >> querying the system policy for ECRC. > > >> > > >> Signed-off-by: Vidya Sagar > > >> Reviewed-by: Jingoo Han > > >> --- > > >> V3: > > >> * Added 'Reviewed-by: Jingoo Han ' > > >> > > >> V2: > > >> * Addressed Jingoo's review comment > > >> * Removed saving 'td' bit information in 'dw_pcie' structure > > >> > > >> drivers/pci/controller/dwc/pcie-designware.c | 8 ++-- > > >> drivers/pci/controller/dwc/pcie-designware.h | 1 + > > >> 2 files changed, 7 insertions(+), 2 deletions(-) > > >> > > >> diff --git a/drivers/pci/controller/dwc/pcie-designware.c > > >> b/drivers/pci/controller/dwc/pcie-designware.c > > >> index b5e438b70cd5..cbd651b219d2 100644 > > >> --- a/drivers/pci/controller/dwc/pcie-designware.c > > >> +++ b/drivers/pci/controller/dwc/pcie-designware.c > > >> @@ -246,6 +246,8 @@ static void dw_pcie_prog_outbound_atu_unroll(struct > > >> dw_pcie *pci, u8 func_no, > > >> dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET, > > >> upper_32_bits(pci_addr)); > > >> val = type | PCIE_ATU_FUNC_NUM(func_no); > > >> + if (pci->version == 0x490A) > > >> + val = val | pcie_is_ecrc_enabled() << PCIE_ATU_TD_SHIFT; > > >> val = upper_32_bits(size - 1) ? > > >> val | PCIE_ATU_INCREASE_REGION_SIZE : val; > > >> dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, > > >> val); > > >> @@ -294,8 +296,10 @@ static void __dw_pcie_prog_outbound_atu(struct > > >> dw_pcie *pci, u8 func_no, > > >> lower_32_bits(pci_addr)); > > >> dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, > > >> upper_32_bits(pci_addr)); > > >> - dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type | > > >> - PCIE_ATU_FUNC_NUM(func_no)); > > >> + val = type | PCIE_ATU_FUNC_NUM(func_no); > > >> + if (pci->version == 0x490A) > > > > > > Is this even possible? Are the non-unroll ATU registers available post > > > 4.80? > > I'm not sure. Gustavo might have information about this. I made this > > change so that it is taken care off even if they available. > > The Synopsys DesignWare PCIe IP is highly configurable, therefore is > dependable on what the design team has configured for their solution. > Although Synopsys doesn't recommend the use of non-unroll ATU, the > customers are free to select what they want for their design. Okay, then there's a bug in the driver if the version is set to 0x480A or later and non-unroll is used: if (pci->version >= 0x480A || (!pci->version && dw_pcie_iatu_unroll_enabled(pci))) { Probably can just drop the version checking. The detection should always work. Rob
RE: [PATCH V3 2/2] PCI: dwc: Add support to configure for ECRC
On Mon, Nov 2, 2020 at 14:27:9, Vidya Sagar wrote: > > > On 11/2/2020 7:45 PM, Rob Herring wrote: > > External email: Use caution opening links or attachments > > > > > > On Thu, Oct 29, 2020 at 12:40 AM Vidya Sagar wrote: > >> > >> DesignWare core has a TLP digest (TD) override bit in one of the control > >> registers of ATU. This bit also needs to be programmed for proper ECRC > >> functionality. This is currently identified as an issue with DesignWare > >> IP version 4.90a. This patch does the required programming in ATU upon > >> querying the system policy for ECRC. > >> > >> Signed-off-by: Vidya Sagar > >> Reviewed-by: Jingoo Han > >> --- > >> V3: > >> * Added 'Reviewed-by: Jingoo Han ' > >> > >> V2: > >> * Addressed Jingoo's review comment > >> * Removed saving 'td' bit information in 'dw_pcie' structure > >> > >> drivers/pci/controller/dwc/pcie-designware.c | 8 ++-- > >> drivers/pci/controller/dwc/pcie-designware.h | 1 + > >> 2 files changed, 7 insertions(+), 2 deletions(-) > >> > >> diff --git a/drivers/pci/controller/dwc/pcie-designware.c > >> b/drivers/pci/controller/dwc/pcie-designware.c > >> index b5e438b70cd5..cbd651b219d2 100644 > >> --- a/drivers/pci/controller/dwc/pcie-designware.c > >> +++ b/drivers/pci/controller/dwc/pcie-designware.c > >> @@ -246,6 +246,8 @@ static void dw_pcie_prog_outbound_atu_unroll(struct > >> dw_pcie *pci, u8 func_no, > >> dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET, > >> upper_32_bits(pci_addr)); > >> val = type | PCIE_ATU_FUNC_NUM(func_no); > >> + if (pci->version == 0x490A) > >> + val = val | pcie_is_ecrc_enabled() << PCIE_ATU_TD_SHIFT; > >> val = upper_32_bits(size - 1) ? > >> val | PCIE_ATU_INCREASE_REGION_SIZE : val; > >> dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, > >> val); > >> @@ -294,8 +296,10 @@ static void __dw_pcie_prog_outbound_atu(struct > >> dw_pcie *pci, u8 func_no, > >> lower_32_bits(pci_addr)); > >> dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, > >> upper_32_bits(pci_addr)); > >> - dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type | > >> - PCIE_ATU_FUNC_NUM(func_no)); > >> + val = type | PCIE_ATU_FUNC_NUM(func_no); > >> + if (pci->version == 0x490A) > > > > Is this even possible? Are the non-unroll ATU registers available post 4.80? > I'm not sure. Gustavo might have information about this. I made this > change so that it is taken care off even if they available. The Synopsys DesignWare PCIe IP is highly configurable, therefore is dependable on what the design team has configured for their solution. Although Synopsys doesn't recommend the use of non-unroll ATU, the customers are free to select what they want for their design. -Gustavo > > > > > Rob > >
Re: [PATCH V3 2/2] PCI: dwc: Add support to configure for ECRC
On 11/2/2020 7:45 PM, Rob Herring wrote: External email: Use caution opening links or attachments On Thu, Oct 29, 2020 at 12:40 AM Vidya Sagar wrote: DesignWare core has a TLP digest (TD) override bit in one of the control registers of ATU. This bit also needs to be programmed for proper ECRC functionality. This is currently identified as an issue with DesignWare IP version 4.90a. This patch does the required programming in ATU upon querying the system policy for ECRC. Signed-off-by: Vidya Sagar Reviewed-by: Jingoo Han --- V3: * Added 'Reviewed-by: Jingoo Han ' V2: * Addressed Jingoo's review comment * Removed saving 'td' bit information in 'dw_pcie' structure drivers/pci/controller/dwc/pcie-designware.c | 8 ++-- drivers/pci/controller/dwc/pcie-designware.h | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index b5e438b70cd5..cbd651b219d2 100644 --- a/drivers/pci/controller/dwc/pcie-designware.c +++ b/drivers/pci/controller/dwc/pcie-designware.c @@ -246,6 +246,8 @@ static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, u8 func_no, dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET, upper_32_bits(pci_addr)); val = type | PCIE_ATU_FUNC_NUM(func_no); + if (pci->version == 0x490A) + val = val | pcie_is_ecrc_enabled() << PCIE_ATU_TD_SHIFT; val = upper_32_bits(size - 1) ? val | PCIE_ATU_INCREASE_REGION_SIZE : val; dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, val); @@ -294,8 +296,10 @@ static void __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, lower_32_bits(pci_addr)); dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, upper_32_bits(pci_addr)); - dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type | - PCIE_ATU_FUNC_NUM(func_no)); + val = type | PCIE_ATU_FUNC_NUM(func_no); + if (pci->version == 0x490A) Is this even possible? Are the non-unroll ATU registers available post 4.80? I'm not sure. Gustavo might have information about this. I made this change so that it is taken care off even if they available. Rob
Re: [PATCH V3 2/2] PCI: dwc: Add support to configure for ECRC
On Thu, Oct 29, 2020 at 12:40 AM Vidya Sagar wrote: > > DesignWare core has a TLP digest (TD) override bit in one of the control > registers of ATU. This bit also needs to be programmed for proper ECRC > functionality. This is currently identified as an issue with DesignWare > IP version 4.90a. This patch does the required programming in ATU upon > querying the system policy for ECRC. > > Signed-off-by: Vidya Sagar > Reviewed-by: Jingoo Han > --- > V3: > * Added 'Reviewed-by: Jingoo Han ' > > V2: > * Addressed Jingoo's review comment > * Removed saving 'td' bit information in 'dw_pcie' structure > > drivers/pci/controller/dwc/pcie-designware.c | 8 ++-- > drivers/pci/controller/dwc/pcie-designware.h | 1 + > 2 files changed, 7 insertions(+), 2 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c > b/drivers/pci/controller/dwc/pcie-designware.c > index b5e438b70cd5..cbd651b219d2 100644 > --- a/drivers/pci/controller/dwc/pcie-designware.c > +++ b/drivers/pci/controller/dwc/pcie-designware.c > @@ -246,6 +246,8 @@ static void dw_pcie_prog_outbound_atu_unroll(struct > dw_pcie *pci, u8 func_no, > dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET, > upper_32_bits(pci_addr)); > val = type | PCIE_ATU_FUNC_NUM(func_no); > + if (pci->version == 0x490A) > + val = val | pcie_is_ecrc_enabled() << PCIE_ATU_TD_SHIFT; > val = upper_32_bits(size - 1) ? > val | PCIE_ATU_INCREASE_REGION_SIZE : val; > dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, val); > @@ -294,8 +296,10 @@ static void __dw_pcie_prog_outbound_atu(struct dw_pcie > *pci, u8 func_no, >lower_32_bits(pci_addr)); > dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, >upper_32_bits(pci_addr)); > - dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type | > - PCIE_ATU_FUNC_NUM(func_no)); > + val = type | PCIE_ATU_FUNC_NUM(func_no); > + if (pci->version == 0x490A) Is this even possible? Are the non-unroll ATU registers available post 4.80? Rob
Re: [PATCH V3 2/2] PCI: dwc: Add support to configure for ECRC
On 10/30/2020 3:33 AM, Jingoo Han wrote: External email: Use caution opening links or attachments On 10/29/20, 1:40 AM, Vidya Sagar wrote: DesignWare core has a TLP digest (TD) override bit in one of the control registers of ATU. This bit also needs to be programmed for proper ECRC functionality. This is currently identified as an issue with DesignWare IP version 4.90a. This patch does the required programming in ATU upon querying the system policy for ECRC. Signed-off-by: Vidya Sagar Reviewed-by: Jingoo Han No, it should be Acked-by. I gave you Acked-by, not Reviewed-by. Acked-by: Jingoo Han Apologies. My bad. I saw the 'Reviewed-by' of the other patch (i.e. PCI/AER: Add pcie_is_ecrc_enabled() API) and put that for this patch as well. I'll update. Best regards, Jingoo Han --- V3: * Added 'Reviewed-by: Jingoo Han ' V2: * Addressed Jingoo's review comment * Removed saving 'td' bit information in 'dw_pcie' structure drivers/pci/controller/dwc/pcie-designware.c | 8 ++-- drivers/pci/controller/dwc/pcie-designware.h | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) [...]
Re: [PATCH V3 2/2] PCI: dwc: Add support to configure for ECRC
On 10/29/20, 1:40 AM, Vidya Sagar wrote: > > DesignWare core has a TLP digest (TD) override bit in one of the control > registers of ATU. This bit also needs to be programmed for proper ECRC > functionality. This is currently identified as an issue with DesignWare > IP version 4.90a. This patch does the required programming in ATU upon > querying the system policy for ECRC. > > Signed-off-by: Vidya Sagar > Reviewed-by: Jingoo Han No, it should be Acked-by. I gave you Acked-by, not Reviewed-by. Acked-by: Jingoo Han Best regards, Jingoo Han > --- > V3: > * Added 'Reviewed-by: Jingoo Han ' > > V2: > * Addressed Jingoo's review comment > * Removed saving 'td' bit information in 'dw_pcie' structure > > drivers/pci/controller/dwc/pcie-designware.c | 8 ++-- > drivers/pci/controller/dwc/pcie-designware.h | 1 + > 2 files changed, 7 insertions(+), 2 deletions(-) [...]
[PATCH V3 2/2] PCI: dwc: Add support to configure for ECRC
DesignWare core has a TLP digest (TD) override bit in one of the control registers of ATU. This bit also needs to be programmed for proper ECRC functionality. This is currently identified as an issue with DesignWare IP version 4.90a. This patch does the required programming in ATU upon querying the system policy for ECRC. Signed-off-by: Vidya Sagar Reviewed-by: Jingoo Han --- V3: * Added 'Reviewed-by: Jingoo Han ' V2: * Addressed Jingoo's review comment * Removed saving 'td' bit information in 'dw_pcie' structure drivers/pci/controller/dwc/pcie-designware.c | 8 ++-- drivers/pci/controller/dwc/pcie-designware.h | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index b5e438b70cd5..cbd651b219d2 100644 --- a/drivers/pci/controller/dwc/pcie-designware.c +++ b/drivers/pci/controller/dwc/pcie-designware.c @@ -246,6 +246,8 @@ static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, u8 func_no, dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET, upper_32_bits(pci_addr)); val = type | PCIE_ATU_FUNC_NUM(func_no); + if (pci->version == 0x490A) + val = val | pcie_is_ecrc_enabled() << PCIE_ATU_TD_SHIFT; val = upper_32_bits(size - 1) ? val | PCIE_ATU_INCREASE_REGION_SIZE : val; dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, val); @@ -294,8 +296,10 @@ static void __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, lower_32_bits(pci_addr)); dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, upper_32_bits(pci_addr)); - dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type | - PCIE_ATU_FUNC_NUM(func_no)); + val = type | PCIE_ATU_FUNC_NUM(func_no); + if (pci->version == 0x490A) + val = val | pcie_is_ecrc_enabled() << PCIE_ATU_TD_SHIFT; + dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val); dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE); /* diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index e7f441441db2..b01ef407fd52 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -89,6 +89,7 @@ #define PCIE_ATU_TYPE_IO 0x2 #define PCIE_ATU_TYPE_CFG0 0x4 #define PCIE_ATU_TYPE_CFG1 0x5 +#define PCIE_ATU_TD_SHIFT 8 #define PCIE_ATU_FUNC_NUM(pf) ((pf) << 20) #define PCIE_ATU_CR2 0x908 #define PCIE_ATU_ENABLEBIT(31) -- 2.17.1