RE: [PATCH V5 1/5] dt-bindings: pwm: Add i.MX TPM PWM binding
Hi, Thierry Best Regards! Anson Huang > -Original Message- > From: Thierry Reding [mailto:thierry.red...@gmail.com] > Sent: 2019年3月18日 17:59 > To: Anson Huang > Cc: robh...@kernel.org; mark.rutl...@arm.com; shawn...@kernel.org; > s.ha...@pengutronix.de; ker...@pengutronix.de; feste...@gmail.com; > li...@armlinux.org.uk; ota...@ossystems.com.br; ste...@agner.ch; > Leonard Crestez ; Robin Gong > ; jan.tu...@emtrion.com; linux- > p...@vger.kernel.org; devicet...@vger.kernel.org; linux-arm- > ker...@lists.infradead.org; linux-kernel@vger.kernel.org; u.kleine- > koe...@pengutronix.de; dl-linux-imx > Subject: Re: [PATCH V5 1/5] dt-bindings: pwm: Add i.MX TPM PWM binding > > On Mon, Mar 18, 2019 at 07:41:32AM +, Anson Huang wrote: > > Add i.MX TPM(Low Power Timer/Pulse Width Modulation Module) PWM > binding. > > > > Signed-off-by: Anson Huang > > --- > > No changes. > > --- > > Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt | 19 > > +++ > > 1 file changed, 19 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > > > > diff --git a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > > b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > > new file mode 100644 > > index 000..d47b8fb > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > > @@ -0,0 +1,19 @@ > > +Freescale i.MX TPM PWM controller > > + > > +Required properties: > > +- compatible : Should be "fsl,imx-tpm-pwm". > > Should this perhaps only be "fsl,imx-tpm"? Sounds to me like this is a > hardware block called "TPM" that can be used as a PWM. The compatible > string should describe the hardware block, not the mode in which it is used. OK, will fix it. > > > +- reg: Physical base address and length of the controller's registers. > > +- #pwm-cells: Should be 2. See pwm.txt in this directory for a description > of the cells format. > > +- clocks : The clock provided by the SoC to drive the PWM. > > +- interrupts: The interrupt for the pwm controller. > > pwm -> PWM OK. Thanks, Anson > > Thierry
Re: [PATCH V5 1/5] dt-bindings: pwm: Add i.MX TPM PWM binding
On Mon, Mar 18, 2019 at 07:41:32AM +, Anson Huang wrote: > Add i.MX TPM(Low Power Timer/Pulse Width Modulation Module) PWM binding. > > Signed-off-by: Anson Huang > --- > No changes. > --- > Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt | 19 > +++ > 1 file changed, 19 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > > diff --git a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > new file mode 100644 > index 000..d47b8fb > --- /dev/null > +++ b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > @@ -0,0 +1,19 @@ > +Freescale i.MX TPM PWM controller > + > +Required properties: > +- compatible : Should be "fsl,imx-tpm-pwm". Should this perhaps only be "fsl,imx-tpm"? Sounds to me like this is a hardware block called "TPM" that can be used as a PWM. The compatible string should describe the hardware block, not the mode in which it is used. > +- reg: Physical base address and length of the controller's registers. > +- #pwm-cells: Should be 2. See pwm.txt in this directory for a description > of the cells format. > +- clocks : The clock provided by the SoC to drive the PWM. > +- interrupts: The interrupt for the pwm controller. pwm -> PWM Thierry signature.asc Description: PGP signature
RE: [PATCH V5 1/5] dt-bindings: pwm: Add i.MX TPM PWM binding
Hi, Stefan Best Regards! Anson Huang > -Original Message- > From: Stefan Agner [mailto:ste...@agner.ch] > Sent: 2019年3月18日 16:19 > To: Anson Huang > Cc: thierry.red...@gmail.com; robh...@kernel.org; mark.rutl...@arm.com; > shawn...@kernel.org; s.ha...@pengutronix.de; ker...@pengutronix.de; > feste...@gmail.com; li...@armlinux.org.uk; ota...@ossystems.com.br; > Leonard Crestez ; Robin Gong > ; jan.tu...@emtrion.com; linux- > p...@vger.kernel.org; devicet...@vger.kernel.org; linux-arm- > ker...@lists.infradead.org; linux-kernel@vger.kernel.org; u.kleine- > koe...@pengutronix.de; dl-linux-imx > Subject: Re: [PATCH V5 1/5] dt-bindings: pwm: Add i.MX TPM PWM binding > > On 18.03.2019 08:41, Anson Huang wrote: > > Add i.MX TPM(Low Power Timer/Pulse Width Modulation Module) PWM > binding. > > > > Signed-off-by: Anson Huang > > --- > > No changes. > > --- > > Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt | 19 > > +++ > > 1 file changed, 19 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > > > > diff --git a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > > b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > > new file mode 100644 > > index 000..d47b8fb > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > > @@ -0,0 +1,19 @@ > > +Freescale i.MX TPM PWM controller > > + > > +Required properties: > > +- compatible : Should be "fsl,imx-tpm-pwm". > > +- reg: Physical base address and length of the controller's registers. > > +- #pwm-cells: Should be 2. See pwm.txt in this directory for a > > description of the cells format. > > It seems that the driver supports polarity. Can we use 3 cells so we can > specify the polarity in the device tree? > > Also use 3 cells in the base device tree to enable other boards making use of > the polarity (arch/arm/boot/dts/imx7ulp.dtsi). It makes sense, I will change it to 3 cells and specify the polarity in backlight node. Anson. > > -- > Stefan > > > +- clocks : The clock provided by the SoC to drive the PWM. > > +- interrupts: The interrupt for the pwm controller. > > + > > +Example: > > + > > +pwm0: tpm@4025 { > > + compatible = "fsl,imx-tpm-pwm"; > > + reg = <0x4025 0x1000>; > > + assigned-clocks = <&clks IMX7ULP_CLK_LPTPM4>; > > + assigned-clock-parents = <&clks IMX7ULP_CLK_SOSC_BUS_CLK>; > > + clocks = <&clks IMX7ULP_CLK_LPTPM4>; > > + #pwm-cells = <2>; > > +};
Re: [PATCH V5 1/5] dt-bindings: pwm: Add i.MX TPM PWM binding
On 18.03.2019 08:41, Anson Huang wrote: > Add i.MX TPM(Low Power Timer/Pulse Width Modulation Module) PWM binding. > > Signed-off-by: Anson Huang > --- > No changes. > --- > Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt | 19 > +++ > 1 file changed, 19 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > > diff --git a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > new file mode 100644 > index 000..d47b8fb > --- /dev/null > +++ b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > @@ -0,0 +1,19 @@ > +Freescale i.MX TPM PWM controller > + > +Required properties: > +- compatible : Should be "fsl,imx-tpm-pwm". > +- reg: Physical base address and length of the controller's registers. > +- #pwm-cells: Should be 2. See pwm.txt in this directory for a > description of the cells format. It seems that the driver supports polarity. Can we use 3 cells so we can specify the polarity in the device tree? Also use 3 cells in the base device tree to enable other boards making use of the polarity (arch/arm/boot/dts/imx7ulp.dtsi). -- Stefan > +- clocks : The clock provided by the SoC to drive the PWM. > +- interrupts: The interrupt for the pwm controller. > + > +Example: > + > +pwm0: tpm@4025 { > + compatible = "fsl,imx-tpm-pwm"; > + reg = <0x4025 0x1000>; > + assigned-clocks = <&clks IMX7ULP_CLK_LPTPM4>; > + assigned-clock-parents = <&clks IMX7ULP_CLK_SOSC_BUS_CLK>; > + clocks = <&clks IMX7ULP_CLK_LPTPM4>; > + #pwm-cells = <2>; > +};
[PATCH V5 1/5] dt-bindings: pwm: Add i.MX TPM PWM binding
Add i.MX TPM(Low Power Timer/Pulse Width Modulation Module) PWM binding. Signed-off-by: Anson Huang --- No changes. --- Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt | 19 +++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt diff --git a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt new file mode 100644 index 000..d47b8fb --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt @@ -0,0 +1,19 @@ +Freescale i.MX TPM PWM controller + +Required properties: +- compatible : Should be "fsl,imx-tpm-pwm". +- reg: Physical base address and length of the controller's registers. +- #pwm-cells: Should be 2. See pwm.txt in this directory for a description of the cells format. +- clocks : The clock provided by the SoC to drive the PWM. +- interrupts: The interrupt for the pwm controller. + +Example: + +pwm0: tpm@4025 { + compatible = "fsl,imx-tpm-pwm"; + reg = <0x4025 0x1000>; + assigned-clocks = <&clks IMX7ULP_CLK_LPTPM4>; + assigned-clock-parents = <&clks IMX7ULP_CLK_SOSC_BUS_CLK>; + clocks = <&clks IMX7ULP_CLK_LPTPM4>; + #pwm-cells = <2>; +}; -- 2.7.4