Re: [PATCH net-next 1/3] ptp: Add adjphase function to support phase offset control.

2020-05-01 Thread Vincent Cheng
On Thu, Apr 30, 2020 at 11:37:34PM EDT, Richard Cochran wrote:
>On Wed, Apr 29, 2020 at 08:28:23PM -0400, vincent.cheng...@renesas.com wrote:
>> diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c
>> index acabbe7..c46ff98 100644
>> --- a/drivers/ptp/ptp_clock.c
>> +++ b/drivers/ptp/ptp_clock.c
>> @@ -146,6 +146,8 @@ static int ptp_clock_adjtime(struct posix_clock *pc, 
>> struct __kernel_timex *tx)
>>  else
>>  err = ops->adjfreq(ops, ppb);
>>  ptp->dialed_frequency = tx->freq;
>> +} else if (tx->modes & ADJ_OFFSET) {
>> +err = ops->adjphase(ops, tx->offset);
>
>This is a new method, and no drivers have it, so there must be a check
>that the function pointer is non-null.

Yes, good point.  Will fix and resubmit.

Thanks,
Vincent


Re: [PATCH net-next 1/3] ptp: Add adjphase function to support phase offset control.

2020-04-30 Thread Richard Cochran
On Wed, Apr 29, 2020 at 08:28:23PM -0400, vincent.cheng...@renesas.com wrote:
> diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c
> index acabbe7..c46ff98 100644
> --- a/drivers/ptp/ptp_clock.c
> +++ b/drivers/ptp/ptp_clock.c
> @@ -146,6 +146,8 @@ static int ptp_clock_adjtime(struct posix_clock *pc, 
> struct __kernel_timex *tx)
>   else
>   err = ops->adjfreq(ops, ppb);
>   ptp->dialed_frequency = tx->freq;
> + } else if (tx->modes & ADJ_OFFSET) {
> + err = ops->adjphase(ops, tx->offset);

This is a new method, and no drivers have it, so there must be a check
that the function pointer is non-null.

Thanks,
Richard


[PATCH net-next 1/3] ptp: Add adjphase function to support phase offset control.

2020-04-29 Thread vincent.cheng.xh
From: Vincent Cheng 

Adds adjust phase function to take advantage of a PHC
clock's hardware filtering capability that uses phase offset
control word instead of frequency offset control word.

Signed-off-by: Vincent Cheng 
---
 drivers/ptp/ptp_clock.c  | 2 ++
 include/linux/ptp_clock_kernel.h | 6 +-
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c
index acabbe7..c46ff98 100644
--- a/drivers/ptp/ptp_clock.c
+++ b/drivers/ptp/ptp_clock.c
@@ -146,6 +146,8 @@ static int ptp_clock_adjtime(struct posix_clock *pc, struct 
__kernel_timex *tx)
else
err = ops->adjfreq(ops, ppb);
ptp->dialed_frequency = tx->freq;
+   } else if (tx->modes & ADJ_OFFSET) {
+   err = ops->adjphase(ops, tx->offset);
} else if (tx->modes == 0) {
tx->freq = ptp->dialed_frequency;
err = 0;
diff --git a/include/linux/ptp_clock_kernel.h b/include/linux/ptp_clock_kernel.h
index 121a7ed..31144d9 100644
--- a/include/linux/ptp_clock_kernel.h
+++ b/include/linux/ptp_clock_kernel.h
@@ -36,7 +36,7 @@ struct ptp_system_timestamp {
 };
 
 /**
- * struct ptp_clock_info - decribes a PTP hardware clock
+ * struct ptp_clock_info - describes a PTP hardware clock
  *
  * @owner: The clock driver should set to THIS_MODULE.
  * @name:  A short "friendly name" to identify the clock and to
@@ -65,6 +65,9 @@ struct ptp_system_timestamp {
  *parameter delta: Desired frequency offset from nominal frequency
  *in parts per billion
  *
+ * @adjphase:  Adjusts the phase offset of the hardware clock.
+ * parameter delta: Desired change in nanoseconds.
+ *
  * @adjtime:  Shifts the time of the hardware clock.
  *parameter delta: Desired change in nanoseconds.
  *
@@ -128,6 +131,7 @@ struct ptp_clock_info {
struct ptp_pin_desc *pin_config;
int (*adjfine)(struct ptp_clock_info *ptp, long scaled_ppm);
int (*adjfreq)(struct ptp_clock_info *ptp, s32 delta);
+   int (*adjphase)(struct ptp_clock_info *ptp, s32 phase);
int (*adjtime)(struct ptp_clock_info *ptp, s64 delta);
int (*gettime64)(struct ptp_clock_info *ptp, struct timespec64 *ts);
int (*gettimex64)(struct ptp_clock_info *ptp, struct timespec64 *ts,
-- 
2.7.4