Re: [PATCH v10 4/6] devicetree: backlight: Add new SKY81452 backlight binding
DT Ack please. On Wed, Jan 07, 2015 at 11:19:25AM +0900, gyun...@gmail.com wrote: > From: Gyungoh Yoo > > Signed-off-by: Gyungoh Yoo > Acked-by: Bryan Wu > --- > Changes v10: > Nothing > > Changes v9: > Nothing > > Changes v8: > Renamed property names for backlight with vendor prefix > Modified gpio-enable property to generic property for GPIO > Made up the example for backlight DT > > Changes v7: > Nothing > > Changes v6: > Nothing > > Changes v5: > Nothing > > Changes v4: > Nothing > > Changes v3: > Nothing > > Changes v2: > Added reg attribute for I2C slave address > > .../video/backlight/sky81452-backlight.txt | 29 > ++ > 1 file changed, 29 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt > > diff --git > a/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt > b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt > new file mode 100644 > index 000..8daebf5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt > @@ -0,0 +1,29 @@ > +SKY81452-backlight bindings > + > +Required properties: > +- compatible : Must be "skyworks,sky81452-backlight" > + > +Optional properties: > +- name : Name of backlight device. Default is > 'lcd-backlight'. > +- gpios : GPIO to use to EN pin. > + See Documentation/devicetree/bindings/gpio/gpio.txt > +- skyworks,en-channels : Enable mask for current sink channel 1 to 6. > +- skyworks,ignore-pwm: Ignore both PWM input > +- skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming. > +- skyworks,phase-shift : Enable phase shift mode > +- skyworks,ovp-level : Over-voltage protection level. > + Should be between 14 or 28V. > +- skyworks,short-detection-threshold : It should be one of 4, 5, 6 and 7V. > +- skyworks,current-limit : It should be 2300mA or 2750mA. > + > +Example: > + > + backlight { > + compatible = "skyworks,sky81452-backlight"; > + name = "pwm-backlight"; > + skyworks,en-channels = <0x3f>; > + skyworks,ignore-pwm; > + skyworks,phase-shift; > + skyworks,ovp-level = <20>; > + skyworks,current-limit = <2300>; > + }; > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v10 4/6] devicetree: backlight: Add new SKY81452 backlight binding
DT Ack please. On Wed, Jan 07, 2015 at 11:19:25AM +0900, gyun...@gmail.com wrote: From: Gyungoh Yoo jack@skyworksinc.com Signed-off-by: Gyungoh Yoo jack@skyworksinc.com Acked-by: Bryan Wu coolo...@gmail.com --- Changes v10: Nothing Changes v9: Nothing Changes v8: Renamed property names for backlight with vendor prefix Modified gpio-enable property to generic property for GPIO Made up the example for backlight DT Changes v7: Nothing Changes v6: Nothing Changes v5: Nothing Changes v4: Nothing Changes v3: Nothing Changes v2: Added reg attribute for I2C slave address .../video/backlight/sky81452-backlight.txt | 29 ++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt diff --git a/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt new file mode 100644 index 000..8daebf5 --- /dev/null +++ b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt @@ -0,0 +1,29 @@ +SKY81452-backlight bindings + +Required properties: +- compatible : Must be skyworks,sky81452-backlight + +Optional properties: +- name : Name of backlight device. Default is 'lcd-backlight'. +- gpios : GPIO to use to EN pin. + See Documentation/devicetree/bindings/gpio/gpio.txt +- skyworks,en-channels : Enable mask for current sink channel 1 to 6. +- skyworks,ignore-pwm: Ignore both PWM input +- skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming. +- skyworks,phase-shift : Enable phase shift mode +- skyworks,ovp-level : Over-voltage protection level. + Should be between 14 or 28V. +- skyworks,short-detection-threshold : It should be one of 4, 5, 6 and 7V. +- skyworks,current-limit : It should be 2300mA or 2750mA. + +Example: + + backlight { + compatible = skyworks,sky81452-backlight; + name = pwm-backlight; + skyworks,en-channels = 0x3f; + skyworks,ignore-pwm; + skyworks,phase-shift; + skyworks,ovp-level = 20; + skyworks,current-limit = 2300; + }; -- 1.9.1 -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[PATCH v10 4/6] devicetree: backlight: Add new SKY81452 backlight binding
From: Gyungoh Yoo Signed-off-by: Gyungoh Yoo Acked-by: Bryan Wu --- Changes v10: Nothing Changes v9: Nothing Changes v8: Renamed property names for backlight with vendor prefix Modified gpio-enable property to generic property for GPIO Made up the example for backlight DT Changes v7: Nothing Changes v6: Nothing Changes v5: Nothing Changes v4: Nothing Changes v3: Nothing Changes v2: Added reg attribute for I2C slave address .../video/backlight/sky81452-backlight.txt | 29 ++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt diff --git a/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt new file mode 100644 index 000..8daebf5 --- /dev/null +++ b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt @@ -0,0 +1,29 @@ +SKY81452-backlight bindings + +Required properties: +- compatible : Must be "skyworks,sky81452-backlight" + +Optional properties: +- name : Name of backlight device. Default is 'lcd-backlight'. +- gpios: GPIO to use to EN pin. + See Documentation/devicetree/bindings/gpio/gpio.txt +- skyworks,en-channels : Enable mask for current sink channel 1 to 6. +- skyworks,ignore-pwm : Ignore both PWM input +- skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming. +- skyworks,phase-shift : Enable phase shift mode +- skyworks,ovp-level : Over-voltage protection level. + Should be between 14 or 28V. +- skyworks,short-detection-threshold : It should be one of 4, 5, 6 and 7V. +- skyworks,current-limit : It should be 2300mA or 2750mA. + +Example: + + backlight { + compatible = "skyworks,sky81452-backlight"; + name = "pwm-backlight"; + skyworks,en-channels = <0x3f>; + skyworks,ignore-pwm; + skyworks,phase-shift; + skyworks,ovp-level = <20>; + skyworks,current-limit = <2300>; + }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[PATCH v10 4/6] devicetree: backlight: Add new SKY81452 backlight binding
From: Gyungoh Yoo jack@skyworksinc.com Signed-off-by: Gyungoh Yoo jack@skyworksinc.com Acked-by: Bryan Wu coolo...@gmail.com --- Changes v10: Nothing Changes v9: Nothing Changes v8: Renamed property names for backlight with vendor prefix Modified gpio-enable property to generic property for GPIO Made up the example for backlight DT Changes v7: Nothing Changes v6: Nothing Changes v5: Nothing Changes v4: Nothing Changes v3: Nothing Changes v2: Added reg attribute for I2C slave address .../video/backlight/sky81452-backlight.txt | 29 ++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt diff --git a/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt new file mode 100644 index 000..8daebf5 --- /dev/null +++ b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt @@ -0,0 +1,29 @@ +SKY81452-backlight bindings + +Required properties: +- compatible : Must be skyworks,sky81452-backlight + +Optional properties: +- name : Name of backlight device. Default is 'lcd-backlight'. +- gpios: GPIO to use to EN pin. + See Documentation/devicetree/bindings/gpio/gpio.txt +- skyworks,en-channels : Enable mask for current sink channel 1 to 6. +- skyworks,ignore-pwm : Ignore both PWM input +- skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming. +- skyworks,phase-shift : Enable phase shift mode +- skyworks,ovp-level : Over-voltage protection level. + Should be between 14 or 28V. +- skyworks,short-detection-threshold : It should be one of 4, 5, 6 and 7V. +- skyworks,current-limit : It should be 2300mA or 2750mA. + +Example: + + backlight { + compatible = skyworks,sky81452-backlight; + name = pwm-backlight; + skyworks,en-channels = 0x3f; + skyworks,ignore-pwm; + skyworks,phase-shift; + skyworks,ovp-level = 20; + skyworks,current-limit = 2300; + }; -- 1.9.1 -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v10 4/6] devicetree: backlight: Add new SKY81452 backlight binding
DT Ack please. > From: Gyungoh Yoo > > Signed-off-by: Gyungoh Yoo > Acked-by: Bryan Wu > --- [...] > Changes v8: > Renamed property names for backlight with vendor prefix > Modified gpio-enable property to generic property for GPIO > Made up the example for backlight DT [...] > Changes v2: > Added reg attribute for I2C slave address > > .../video/backlight/sky81452-backlight.txt | 29 > ++ > 1 file changed, 29 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt > > diff --git > a/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt > b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt > new file mode 100644 > index 000..8daebf5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt > @@ -0,0 +1,29 @@ > +SKY81452-backlight bindings > + > +Required properties: > +- compatible : Must be "skyworks,sky81452-backlight" > + > +Optional properties: > +- name : Name of backlight device. Default is > 'lcd-backlight'. > +- gpios : GPIO to use to EN pin. > + See Documentation/devicetree/bindings/gpio/gpio.txt > +- skyworks,en-channels : Enable mask for current sink channel 1 to 6. > +- skyworks,ignore-pwm: Ignore both PWM input > +- skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming. > +- skyworks,phase-shift : Enable phase shift mode > +- skyworks,ovp-level : Over-voltage protection level. > + Should be between 14 or 28V. > +- skyworks,short-detection-threshold : It should be one of 4, 5, 6 and 7V. > +- skyworks,current-limit : It should be 2300mA or 2750mA. These need a DT Ack (if they are still alive). > +Example: > + > + backlight { > + compatible = "skyworks,sky81452-backlight"; > + name = "pwm-backlight"; > + skyworks,en-channels = <0x3f>; > + skyworks,ignore-pwm; > + skyworks,phase-shift; > + skyworks,ovp-level = <20>; > + skyworks,current-limit = <2300>; > + }; -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v10 4/6] devicetree: backlight: Add new SKY81452 backlight binding
DT Ack please. From: Gyungoh Yoo jack@skyworksinc.com Signed-off-by: Gyungoh Yoo jack@skyworksinc.com Acked-by: Bryan Wu coolo...@gmail.com --- [...] Changes v8: Renamed property names for backlight with vendor prefix Modified gpio-enable property to generic property for GPIO Made up the example for backlight DT [...] Changes v2: Added reg attribute for I2C slave address .../video/backlight/sky81452-backlight.txt | 29 ++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt diff --git a/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt new file mode 100644 index 000..8daebf5 --- /dev/null +++ b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt @@ -0,0 +1,29 @@ +SKY81452-backlight bindings + +Required properties: +- compatible : Must be skyworks,sky81452-backlight + +Optional properties: +- name : Name of backlight device. Default is 'lcd-backlight'. +- gpios : GPIO to use to EN pin. + See Documentation/devicetree/bindings/gpio/gpio.txt +- skyworks,en-channels : Enable mask for current sink channel 1 to 6. +- skyworks,ignore-pwm: Ignore both PWM input +- skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming. +- skyworks,phase-shift : Enable phase shift mode +- skyworks,ovp-level : Over-voltage protection level. + Should be between 14 or 28V. +- skyworks,short-detection-threshold : It should be one of 4, 5, 6 and 7V. +- skyworks,current-limit : It should be 2300mA or 2750mA. These need a DT Ack (if they are still alive). +Example: + + backlight { + compatible = skyworks,sky81452-backlight; + name = pwm-backlight; + skyworks,en-channels = 0x3f; + skyworks,ignore-pwm; + skyworks,phase-shift; + skyworks,ovp-level = 20; + skyworks,current-limit = 2300; + }; -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[PATCH v10 4/6] devicetree: backlight: Add new SKY81452 backlight binding
From: Gyungoh Yoo Signed-off-by: Gyungoh Yoo Acked-by: Bryan Wu --- Changes v10: Nothing Changes v9: Nothing Changes v8: Renamed property names for backlight with vendor prefix Modified gpio-enable property to generic property for GPIO Made up the example for backlight DT Changes v7: Nothing Changes v6: Nothing Changes v5: Nothing Changes v4: Nothing Changes v3: Nothing Changes v2: Added reg attribute for I2C slave address .../video/backlight/sky81452-backlight.txt | 29 ++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt diff --git a/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt new file mode 100644 index 000..8daebf5 --- /dev/null +++ b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt @@ -0,0 +1,29 @@ +SKY81452-backlight bindings + +Required properties: +- compatible : Must be "skyworks,sky81452-backlight" + +Optional properties: +- name : Name of backlight device. Default is 'lcd-backlight'. +- gpios: GPIO to use to EN pin. + See Documentation/devicetree/bindings/gpio/gpio.txt +- skyworks,en-channels : Enable mask for current sink channel 1 to 6. +- skyworks,ignore-pwm : Ignore both PWM input +- skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming. +- skyworks,phase-shift : Enable phase shift mode +- skyworks,ovp-level : Over-voltage protection level. + Should be between 14 or 28V. +- skyworks,short-detection-threshold : It should be one of 4, 5, 6 and 7V. +- skyworks,current-limit : It should be 2300mA or 2750mA. + +Example: + + backlight { + compatible = "skyworks,sky81452-backlight"; + name = "pwm-backlight"; + skyworks,en-channels = <0x3f>; + skyworks,ignore-pwm; + skyworks,phase-shift; + skyworks,ovp-level = <20>; + skyworks,current-limit = <2300>; + }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[PATCH v10 4/6] devicetree: backlight: Add new SKY81452 backlight binding
From: Gyungoh Yoo jack@skyworksinc.com Signed-off-by: Gyungoh Yoo jack@skyworksinc.com Acked-by: Bryan Wu coolo...@gmail.com --- Changes v10: Nothing Changes v9: Nothing Changes v8: Renamed property names for backlight with vendor prefix Modified gpio-enable property to generic property for GPIO Made up the example for backlight DT Changes v7: Nothing Changes v6: Nothing Changes v5: Nothing Changes v4: Nothing Changes v3: Nothing Changes v2: Added reg attribute for I2C slave address .../video/backlight/sky81452-backlight.txt | 29 ++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt diff --git a/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt new file mode 100644 index 000..8daebf5 --- /dev/null +++ b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt @@ -0,0 +1,29 @@ +SKY81452-backlight bindings + +Required properties: +- compatible : Must be skyworks,sky81452-backlight + +Optional properties: +- name : Name of backlight device. Default is 'lcd-backlight'. +- gpios: GPIO to use to EN pin. + See Documentation/devicetree/bindings/gpio/gpio.txt +- skyworks,en-channels : Enable mask for current sink channel 1 to 6. +- skyworks,ignore-pwm : Ignore both PWM input +- skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming. +- skyworks,phase-shift : Enable phase shift mode +- skyworks,ovp-level : Over-voltage protection level. + Should be between 14 or 28V. +- skyworks,short-detection-threshold : It should be one of 4, 5, 6 and 7V. +- skyworks,current-limit : It should be 2300mA or 2750mA. + +Example: + + backlight { + compatible = skyworks,sky81452-backlight; + name = pwm-backlight; + skyworks,en-channels = 0x3f; + skyworks,ignore-pwm; + skyworks,phase-shift; + skyworks,ovp-level = 20; + skyworks,current-limit = 2300; + }; -- 1.9.1 -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[PATCH v10 4/6] devicetree: backlight: Add new SKY81452 backlight binding
From: Gyungoh Yoo Signed-off-by: Gyungoh Yoo Acked-by: Bryan Wu --- Changes v10: Nothing Changes v9: Nothing Changes v8: Renamed property names for backlight with vendor prefix Modified gpio-enable property to generic property for GPIO Made up the example for backlight DT Changes v7: Nothing Changes v6: Nothing Changes v5: Nothing Changes v4: Nothing Changes v3: Nothing Changes v2: Added reg attribute for I2C slave address .../video/backlight/sky81452-backlight.txt | 29 ++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt diff --git a/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt new file mode 100644 index 000..8daebf5 --- /dev/null +++ b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt @@ -0,0 +1,29 @@ +SKY81452-backlight bindings + +Required properties: +- compatible : Must be "skyworks,sky81452-backlight" + +Optional properties: +- name : Name of backlight device. Default is 'lcd-backlight'. +- gpios: GPIO to use to EN pin. + See Documentation/devicetree/bindings/gpio/gpio.txt +- skyworks,en-channels : Enable mask for current sink channel 1 to 6. +- skyworks,ignore-pwm : Ignore both PWM input +- skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming. +- skyworks,phase-shift : Enable phase shift mode +- skyworks,ovp-level : Over-voltage protection level. + Should be between 14 or 28V. +- skyworks,short-detection-threshold : It should be one of 4, 5, 6 and 7V. +- skyworks,current-limit : It should be 2300mA or 2750mA. + +Example: + + backlight { + compatible = "skyworks,sky81452-backlight"; + name = "pwm-backlight"; + skyworks,en-channels = <0x3f>; + skyworks,ignore-pwm; + skyworks,phase-shift; + skyworks,ovp-level = <20>; + skyworks,current-limit = <2300>; + }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[PATCH v10 4/6] devicetree: backlight: Add new SKY81452 backlight binding
From: Gyungoh Yoo jack@skyworksinc.com Signed-off-by: Gyungoh Yoo jack@skyworksinc.com Acked-by: Bryan Wu coolo...@gmail.com --- Changes v10: Nothing Changes v9: Nothing Changes v8: Renamed property names for backlight with vendor prefix Modified gpio-enable property to generic property for GPIO Made up the example for backlight DT Changes v7: Nothing Changes v6: Nothing Changes v5: Nothing Changes v4: Nothing Changes v3: Nothing Changes v2: Added reg attribute for I2C slave address .../video/backlight/sky81452-backlight.txt | 29 ++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt diff --git a/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt new file mode 100644 index 000..8daebf5 --- /dev/null +++ b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt @@ -0,0 +1,29 @@ +SKY81452-backlight bindings + +Required properties: +- compatible : Must be skyworks,sky81452-backlight + +Optional properties: +- name : Name of backlight device. Default is 'lcd-backlight'. +- gpios: GPIO to use to EN pin. + See Documentation/devicetree/bindings/gpio/gpio.txt +- skyworks,en-channels : Enable mask for current sink channel 1 to 6. +- skyworks,ignore-pwm : Ignore both PWM input +- skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming. +- skyworks,phase-shift : Enable phase shift mode +- skyworks,ovp-level : Over-voltage protection level. + Should be between 14 or 28V. +- skyworks,short-detection-threshold : It should be one of 4, 5, 6 and 7V. +- skyworks,current-limit : It should be 2300mA or 2750mA. + +Example: + + backlight { + compatible = skyworks,sky81452-backlight; + name = pwm-backlight; + skyworks,en-channels = 0x3f; + skyworks,ignore-pwm; + skyworks,phase-shift; + skyworks,ovp-level = 20; + skyworks,current-limit = 2300; + }; -- 1.9.1 -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/