Re: [PATCH v13 2/4] dt-bindings: power: Convert battery.txt to battery.yaml
Rob On 6/29/20 5:56 PM, Rob Herring wrote: On Mon, Jun 22, 2020 at 02:18:35PM -0500, Ricardo Rivera-Matos wrote: From: Dan Murphy Convert the battery.txt file to yaml and fix up the examples. Signed-off-by: Dan Murphy --- .../bindings/power/supply/battery.txt | 83 +-- .../bindings/power/supply/battery.yaml| 139 ++ 2 files changed, 141 insertions(+), 81 deletions(-) create mode 100644 Documentation/devicetree/bindings/power/supply/battery.yaml diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt index 5e29595edd74..4c5216fcb760 100644 --- a/Documentation/devicetree/bindings/power/supply/battery.txt +++ b/Documentation/devicetree/bindings/power/supply/battery.txt @@ -1,87 +1,8 @@ -Battery Characteristics - -The devicetree battery node provides static battery characteristics. -In smart batteries, these are typically stored in non-volatile memory -on a fuel gauge chip. The battery node should be used where there is -no appropriate non-volatile memory, or it is unprogrammed/incorrect. - -Upstream dts files should not include battery nodes, unless the battery -represented cannot easily be replaced in the system by one of a -different type. This prevents unpredictable, potentially harmful, -behavior should a replacement that changes the battery type occur -without a corresponding update to the dtb. +The contents of this file has been moved to battery.yaml Please note that not all charger drivers respect all of the properties. -Required Properties: - - compatible: Must be "simple-battery" - -Optional Properties: - over-voltage-threshold-microvolt: battery over-voltage limit - re-charge-voltage-microvolt: limit to automatically start charging again Why are some things not moved? These were applied recently to the text file on May 8th. They just showed up in the 5.8 kernel. Not sure if there are any more pending changes for the battery.txt but they should be on hold until the yaml is applied. We will update the yaml Dan
Re: [PATCH v13 2/4] dt-bindings: power: Convert battery.txt to battery.yaml
On Mon, Jun 22, 2020 at 02:18:35PM -0500, Ricardo Rivera-Matos wrote: > From: Dan Murphy > > Convert the battery.txt file to yaml and fix up the examples. > > Signed-off-by: Dan Murphy > --- > .../bindings/power/supply/battery.txt | 83 +-- > .../bindings/power/supply/battery.yaml| 139 ++ > 2 files changed, 141 insertions(+), 81 deletions(-) > create mode 100644 > Documentation/devicetree/bindings/power/supply/battery.yaml > > diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt > b/Documentation/devicetree/bindings/power/supply/battery.txt > index 5e29595edd74..4c5216fcb760 100644 > --- a/Documentation/devicetree/bindings/power/supply/battery.txt > +++ b/Documentation/devicetree/bindings/power/supply/battery.txt > @@ -1,87 +1,8 @@ > -Battery Characteristics > - > -The devicetree battery node provides static battery characteristics. > -In smart batteries, these are typically stored in non-volatile memory > -on a fuel gauge chip. The battery node should be used where there is > -no appropriate non-volatile memory, or it is unprogrammed/incorrect. > - > -Upstream dts files should not include battery nodes, unless the battery > -represented cannot easily be replaced in the system by one of a > -different type. This prevents unpredictable, potentially harmful, > -behavior should a replacement that changes the battery type occur > -without a corresponding update to the dtb. > +The contents of this file has been moved to battery.yaml > > Please note that not all charger drivers respect all of the properties. > > -Required Properties: > - - compatible: Must be "simple-battery" > - > -Optional Properties: > - over-voltage-threshold-microvolt: battery over-voltage limit > - re-charge-voltage-microvolt: limit to automatically start charging again Why are some things not moved? > - - voltage-min-design-microvolt: drained battery voltage > - - voltage-max-design-microvolt: fully charged battery voltage > - - energy-full-design-microwatt-hours: battery design energy > - - charge-full-design-microamp-hours: battery design capacity > - trickle-charge-current-microamp: current for trickle-charge phase > - - precharge-current-microamp: current for pre-charge phase > - - precharge-upper-limit-microvolt: limit when to change to constant charging > - - charge-term-current-microamp: current for charge termination phase > - - constant-charge-current-max-microamp: maximum constant input current > - - constant-charge-voltage-max-microvolt: maximum constant input voltage > - - factory-internal-resistance-micro-ohms: battery factory internal > resistance > - - ocv-capacity-table-0: An array providing the open circuit voltage (OCV) > - of the battery and corresponding battery capacity percent, which is used > - to look up battery capacity according to current OCV value. And the open > - circuit voltage unit is microvolt. > - - ocv-capacity-table-1: Same as ocv-capacity-table-0 > - .. > - - ocv-capacity-table-n: Same as ocv-capacity-table-0 > - - ocv-capacity-celsius: An array containing the temperature in degree > Celsius, > - for each of the battery capacity lookup table. The first temperature value > - specifies the OCV table 0, and the second temperature value specifies the > - OCV table 1, and so on. > - - resistance-temp-table: An array providing the temperature in degree > Celsius > - and corresponding battery internal resistance percent, which is used to > look > - up the resistance percent according to current temperature to get a > accurate > - batterty internal resistance in different temperatures. > - > -Battery properties are named, where possible, for the corresponding > -elements in enum power_supply_property, defined in > -https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/power_supply.h > - > -Batteries must be referenced by chargers and/or fuel-gauges > -using a phandle. The phandle's property should be named > -"monitored-battery". > - > -Example: > - > - bat: battery { > - compatible = "simple-battery"; > - voltage-min-design-microvolt = <320>; > - voltage-max-design-microvolt = <420>; > - energy-full-design-microwatt-hours = <529>; > - charge-full-design-microamp-hours = <143>; > - precharge-current-microamp = <256000>; > - charge-term-current-microamp = <128000>; > - constant-charge-current-max-microamp = <90>; > - constant-charge-voltage-max-microvolt = <420>; > - factory-internal-resistance-micro-ohms = <25>; > - ocv-capacity-celsius = <(-10) 0 10>; > - ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 > 90>, ...; > - ocv-capacity-table-1 = <420 100>, <4185000 95>, <4113000 > 90>, ...; > - ocv-capacity-table-2 = <425 100>, <420 95>, <4185000 >
[PATCH v13 2/4] dt-bindings: power: Convert battery.txt to battery.yaml
From: Dan Murphy Convert the battery.txt file to yaml and fix up the examples. Signed-off-by: Dan Murphy --- .../bindings/power/supply/battery.txt | 83 +-- .../bindings/power/supply/battery.yaml| 139 ++ 2 files changed, 141 insertions(+), 81 deletions(-) create mode 100644 Documentation/devicetree/bindings/power/supply/battery.yaml diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt index 5e29595edd74..4c5216fcb760 100644 --- a/Documentation/devicetree/bindings/power/supply/battery.txt +++ b/Documentation/devicetree/bindings/power/supply/battery.txt @@ -1,87 +1,8 @@ -Battery Characteristics - -The devicetree battery node provides static battery characteristics. -In smart batteries, these are typically stored in non-volatile memory -on a fuel gauge chip. The battery node should be used where there is -no appropriate non-volatile memory, or it is unprogrammed/incorrect. - -Upstream dts files should not include battery nodes, unless the battery -represented cannot easily be replaced in the system by one of a -different type. This prevents unpredictable, potentially harmful, -behavior should a replacement that changes the battery type occur -without a corresponding update to the dtb. +The contents of this file has been moved to battery.yaml Please note that not all charger drivers respect all of the properties. -Required Properties: - - compatible: Must be "simple-battery" - -Optional Properties: - over-voltage-threshold-microvolt: battery over-voltage limit - re-charge-voltage-microvolt: limit to automatically start charging again - - voltage-min-design-microvolt: drained battery voltage - - voltage-max-design-microvolt: fully charged battery voltage - - energy-full-design-microwatt-hours: battery design energy - - charge-full-design-microamp-hours: battery design capacity - trickle-charge-current-microamp: current for trickle-charge phase - - precharge-current-microamp: current for pre-charge phase - - precharge-upper-limit-microvolt: limit when to change to constant charging - - charge-term-current-microamp: current for charge termination phase - - constant-charge-current-max-microamp: maximum constant input current - - constant-charge-voltage-max-microvolt: maximum constant input voltage - - factory-internal-resistance-micro-ohms: battery factory internal resistance - - ocv-capacity-table-0: An array providing the open circuit voltage (OCV) - of the battery and corresponding battery capacity percent, which is used - to look up battery capacity according to current OCV value. And the open - circuit voltage unit is microvolt. - - ocv-capacity-table-1: Same as ocv-capacity-table-0 - .. - - ocv-capacity-table-n: Same as ocv-capacity-table-0 - - ocv-capacity-celsius: An array containing the temperature in degree Celsius, - for each of the battery capacity lookup table. The first temperature value - specifies the OCV table 0, and the second temperature value specifies the - OCV table 1, and so on. - - resistance-temp-table: An array providing the temperature in degree Celsius - and corresponding battery internal resistance percent, which is used to look - up the resistance percent according to current temperature to get a accurate - batterty internal resistance in different temperatures. - -Battery properties are named, where possible, for the corresponding -elements in enum power_supply_property, defined in -https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/power_supply.h - -Batteries must be referenced by chargers and/or fuel-gauges -using a phandle. The phandle's property should be named -"monitored-battery". - -Example: - - bat: battery { - compatible = "simple-battery"; - voltage-min-design-microvolt = <320>; - voltage-max-design-microvolt = <420>; - energy-full-design-microwatt-hours = <529>; - charge-full-design-microamp-hours = <143>; - precharge-current-microamp = <256000>; - charge-term-current-microamp = <128000>; - constant-charge-current-max-microamp = <90>; - constant-charge-voltage-max-microvolt = <420>; - factory-internal-resistance-micro-ohms = <25>; - ocv-capacity-celsius = <(-10) 0 10>; - ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, ...; - ocv-capacity-table-1 = <420 100>, <4185000 95>, <4113000 90>, ...; - ocv-capacity-table-2 = <425 100>, <420 95>, <4185000 90>, ...; - resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>; - }; - - charger: charger@11 { - - monitored-battery = <>; - ... - }; - - fuel_gauge: fuel-gauge@22 { -