Re: [linux-sunxi] Re: [PATCH v2 00/10] Allwinner A64/H6 IR support
Hi,
On Wed, 29 May 2019 at 09:19, Maxime Ripard wrote:
>
> On Tue, May 28, 2019 at 08:04:47PM +0200, Ondřej Jirman wrote:
> > Hello Clément,
> >
> > On Tue, May 28, 2019 at 06:21:19PM +0200, Clément Péron wrote:
> > > Hi Ondřej,
> > >
> > > On Mon, 27 May 2019 at 21:53, 'Ondřej Jirman' via linux-sunxi
> > > wrote:
> > > >
> > > > Hi Clément,
> > > >
> > > > On Mon, May 27, 2019 at 09:30:16PM +0200, verejna wrote:
> > > > > Hi Clément,
> > > > >
> > > > > On Mon, May 27, 2019 at 08:49:59PM +0200, Clément Péron wrote:
> > > > > > Hi Ondrej,
> > > > > >
> > > > > > >
> > > > > > > I'm testing on Orange Pi 3.
> > > > > > >
> > > > > > > With your patches, I get kernel lockup after ~1 minute of use
> > > > > > > (ssh stops
> > > > > > > responding/serial console stops responding). I don't have RC
> > > > > > > controller to test
> > > > > > > the CIR. But just enabling the CIR causes kernel to hang shortly
> > > > > > > after boot.
> > > > > > >
> > > > > > > I tried booting multiple times. Other results:
> > > > > > >
> > > > > > > boot 2:
> > > > > > >
> > > > > > > - ssh hangs even before connecting (ethernet crashes/is reset)
> > > > > > >
> > > > > > > INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > > > rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091
> > > > > > > fqs=2437
> > > > > > > dwmac-sun8i 502.ethernet eth0: Reset adapter.
> > > > > > > rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: {
> > > > > > > 0-... } 5696 jiffies s: 81 root: 0x1/.
> > > > > > > rcu: blocking rcu_node structures:
> > > > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > > > rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091
> > > > > > > fqs=9714
> > > > > > > rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: {
> > > > > > > 0-... } 21568 jiffies s: 81 root: 0x1/.
> > > > > > > rcu: blocking rcu_node structures:
> > > > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > > > rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091
> > > > > > > fqs=17203
> > > > > > >
> > > > > > > above messages appear regularly.
> > > > > > >
> > > > > > > boot 3:
> > > > > > >
> > > > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > > > rcu:0-: (9 GPs behind) idle=992/0/0x3 softirq=6123/6123
> > > > > > > fqs=2600
> > > > > > >
> > > > > > >
> > > > > > > Sometimes serial console keeps working. Sometimes it locks up too
> > > > > > > (but not
> > > > > > > frequently). Storage locks up always (any program that was not
> > > > > > > run before
> > > > > > > the crash can't be started and lock up the kernel hard, programs
> > > > > > > that
> > > > > > > were executed prior, can be run again).
> > > > > > >
> > > > > > >
> > > > > > > Exactly the same kernel build on H5 seems to work (or at least I
> > > > > > > was not able to
> > > > > > > trigger the crash). So this seems to be limited to H6 for now.
> > > > > > >
> > > > > > > I suspect that the crash occurs sooner if I vary the light (turn
> > > > > > > on/off the table
> > > > > > > lamp light).
> > > > > > >
> > > > > > > Without your patches, everything works fine on H6, and I never see
> > > > > > > crashes/lockups.
> > > > > > >
> > > > > > > I tired physically covering the IR receiver, and that helps
> > > > > > > preventing the
> > > > > > > crash. As soon as I uncover it, the crash happens again in 1s or
> > > > > > > so:
> > > > > > >
> > > > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > > > rcu:0-: (1 GPs behind) idle=4ea/0/0x3 softirq=4483/4484
> > > > > > > fqs=2444
> > > > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > > > rcu:0-: (1 GPs behind) idle=4ea/0/0x3 softirq=4483/4484
> > > > > > > fqs=9777
> > > > > > >
> > > > > > > This time I got the hung task and reboot: (probably not directly
> > > > > > > related)
> > > > > > >
> > > > > > > INFO: task find:560 blocked for more than 120 seconds.
> > > > > > > Not tainted 5.2.0-rc2+ #7
> > > > > > > "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
> > > > > > > message.
> > > > > > > findD0 560551 0x
> > > > > > > Call trace:
> > > > > > > __switch_to+0x6c/0x90
> > > > > > > __schedule+0x1f4/0x578
> > > > > > > schedule+0x28/0xa8
> > > > > > > io_schedule+0x18/0x38
> > > > > > > __lock_page+0x12c/0x208
> > > > > > > pagecache_get_page+0x238/0x2e8
> > > > > > > __get_node_page+0x6c/0x310
> > > > > > > f2fs_get_node_page+0x14/0x20
> > > > > > > f2fs_iget+0x70/0xc60
> > > > > > > f2fs_lookup+0xcc/0x218
> > > > > > > __lookup_slow+0x78/0x160
> > > > > > > lookup_slow+0x3c/0x60
> > > > > > > walk_component+0x1e4/0x2e0
> > > > > > > path_lookupat.isra.13+0x5c/0x1e0
> > > > > > > filename_lookup.part.23+0x6c/0xe8
> > > > > > > user_path_at_empty+0x4c/0x60
> > > > > > > vfs_statx+0x78/0xd8
> > > > > > > __se_sys_newfstatat+0x24/0x48
> > > > > > >
Re: [linux-sunxi] Re: [PATCH v2 00/10] Allwinner A64/H6 IR support
On Tue, May 28, 2019 at 08:04:47PM +0200, Ondřej Jirman wrote:
> Hello Clément,
>
> On Tue, May 28, 2019 at 06:21:19PM +0200, Clément Péron wrote:
> > Hi Ondřej,
> >
> > On Mon, 27 May 2019 at 21:53, 'Ondřej Jirman' via linux-sunxi
> > wrote:
> > >
> > > Hi Clément,
> > >
> > > On Mon, May 27, 2019 at 09:30:16PM +0200, verejna wrote:
> > > > Hi Clément,
> > > >
> > > > On Mon, May 27, 2019 at 08:49:59PM +0200, Clément Péron wrote:
> > > > > Hi Ondrej,
> > > > >
> > > > > >
> > > > > > I'm testing on Orange Pi 3.
> > > > > >
> > > > > > With your patches, I get kernel lockup after ~1 minute of use (ssh
> > > > > > stops
> > > > > > responding/serial console stops responding). I don't have RC
> > > > > > controller to test
> > > > > > the CIR. But just enabling the CIR causes kernel to hang shortly
> > > > > > after boot.
> > > > > >
> > > > > > I tried booting multiple times. Other results:
> > > > > >
> > > > > > boot 2:
> > > > > >
> > > > > > - ssh hangs even before connecting (ethernet crashes/is reset)
> > > > > >
> > > > > > INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > > rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091
> > > > > > fqs=2437
> > > > > > dwmac-sun8i 502.ethernet eth0: Reset adapter.
> > > > > > rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: {
> > > > > > 0-... } 5696 jiffies s: 81 root: 0x1/.
> > > > > > rcu: blocking rcu_node structures:
> > > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > > rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091
> > > > > > fqs=9714
> > > > > > rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: {
> > > > > > 0-... } 21568 jiffies s: 81 root: 0x1/.
> > > > > > rcu: blocking rcu_node structures:
> > > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > > rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091
> > > > > > fqs=17203
> > > > > >
> > > > > > above messages appear regularly.
> > > > > >
> > > > > > boot 3:
> > > > > >
> > > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > > rcu:0-: (9 GPs behind) idle=992/0/0x3 softirq=6123/6123
> > > > > > fqs=2600
> > > > > >
> > > > > >
> > > > > > Sometimes serial console keeps working. Sometimes it locks up too
> > > > > > (but not
> > > > > > frequently). Storage locks up always (any program that was not run
> > > > > > before
> > > > > > the crash can't be started and lock up the kernel hard, programs
> > > > > > that
> > > > > > were executed prior, can be run again).
> > > > > >
> > > > > >
> > > > > > Exactly the same kernel build on H5 seems to work (or at least I
> > > > > > was not able to
> > > > > > trigger the crash). So this seems to be limited to H6 for now.
> > > > > >
> > > > > > I suspect that the crash occurs sooner if I vary the light (turn
> > > > > > on/off the table
> > > > > > lamp light).
> > > > > >
> > > > > > Without your patches, everything works fine on H6, and I never see
> > > > > > crashes/lockups.
> > > > > >
> > > > > > I tired physically covering the IR receiver, and that helps
> > > > > > preventing the
> > > > > > crash. As soon as I uncover it, the crash happens again in 1s or so:
> > > > > >
> > > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > > rcu:0-: (1 GPs behind) idle=4ea/0/0x3 softirq=4483/4484
> > > > > > fqs=2444
> > > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > > rcu:0-: (1 GPs behind) idle=4ea/0/0x3 softirq=4483/4484
> > > > > > fqs=9777
> > > > > >
> > > > > > This time I got the hung task and reboot: (probably not directly
> > > > > > related)
> > > > > >
> > > > > > INFO: task find:560 blocked for more than 120 seconds.
> > > > > > Not tainted 5.2.0-rc2+ #7
> > > > > > "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
> > > > > > message.
> > > > > > findD0 560551 0x
> > > > > > Call trace:
> > > > > > __switch_to+0x6c/0x90
> > > > > > __schedule+0x1f4/0x578
> > > > > > schedule+0x28/0xa8
> > > > > > io_schedule+0x18/0x38
> > > > > > __lock_page+0x12c/0x208
> > > > > > pagecache_get_page+0x238/0x2e8
> > > > > > __get_node_page+0x6c/0x310
> > > > > > f2fs_get_node_page+0x14/0x20
> > > > > > f2fs_iget+0x70/0xc60
> > > > > > f2fs_lookup+0xcc/0x218
> > > > > > __lookup_slow+0x78/0x160
> > > > > > lookup_slow+0x3c/0x60
> > > > > > walk_component+0x1e4/0x2e0
> > > > > > path_lookupat.isra.13+0x5c/0x1e0
> > > > > > filename_lookup.part.23+0x6c/0xe8
> > > > > > user_path_at_empty+0x4c/0x60
> > > > > > vfs_statx+0x78/0xd8
> > > > > > __se_sys_newfstatat+0x24/0x48
> > > > > > __arm64_sys_newfstatat+0x18/0x20
> > > > > > el0_svc_handler+0x9c/0x170
> > > > > > el0_svc+0x8/0xc
> > > > > > Kernel panic - not syncing: hung_task: blocked tasks
> > > > > > CPU: 1 PID: 34 Comm: khungtaskd Not tainted 5.2.0-rc2+ #7
> > > > > > Hardware name: OrangePi 3 (DT)
> > > > > > Call trace:
> > >
Re: [linux-sunxi] Re: [PATCH v2 00/10] Allwinner A64/H6 IR support
Hello Clément,
On Tue, May 28, 2019 at 06:21:19PM +0200, Clément Péron wrote:
> Hi Ondřej,
>
> On Mon, 27 May 2019 at 21:53, 'Ondřej Jirman' via linux-sunxi
> wrote:
> >
> > Hi Clément,
> >
> > On Mon, May 27, 2019 at 09:30:16PM +0200, verejna wrote:
> > > Hi Clément,
> > >
> > > On Mon, May 27, 2019 at 08:49:59PM +0200, Clément Péron wrote:
> > > > Hi Ondrej,
> > > >
> > > > >
> > > > > I'm testing on Orange Pi 3.
> > > > >
> > > > > With your patches, I get kernel lockup after ~1 minute of use (ssh
> > > > > stops
> > > > > responding/serial console stops responding). I don't have RC
> > > > > controller to test
> > > > > the CIR. But just enabling the CIR causes kernel to hang shortly
> > > > > after boot.
> > > > >
> > > > > I tried booting multiple times. Other results:
> > > > >
> > > > > boot 2:
> > > > >
> > > > > - ssh hangs even before connecting (ethernet crashes/is reset)
> > > > >
> > > > > INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091
> > > > > fqs=2437
> > > > > dwmac-sun8i 502.ethernet eth0: Reset adapter.
> > > > > rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-...
> > > > > } 5696 jiffies s: 81 root: 0x1/.
> > > > > rcu: blocking rcu_node structures:
> > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091
> > > > > fqs=9714
> > > > > rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-...
> > > > > } 21568 jiffies s: 81 root: 0x1/.
> > > > > rcu: blocking rcu_node structures:
> > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091
> > > > > fqs=17203
> > > > >
> > > > > above messages appear regularly.
> > > > >
> > > > > boot 3:
> > > > >
> > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > rcu:0-: (9 GPs behind) idle=992/0/0x3 softirq=6123/6123
> > > > > fqs=2600
> > > > >
> > > > >
> > > > > Sometimes serial console keeps working. Sometimes it locks up too
> > > > > (but not
> > > > > frequently). Storage locks up always (any program that was not run
> > > > > before
> > > > > the crash can't be started and lock up the kernel hard, programs that
> > > > > were executed prior, can be run again).
> > > > >
> > > > >
> > > > > Exactly the same kernel build on H5 seems to work (or at least I was
> > > > > not able to
> > > > > trigger the crash). So this seems to be limited to H6 for now.
> > > > >
> > > > > I suspect that the crash occurs sooner if I vary the light (turn
> > > > > on/off the table
> > > > > lamp light).
> > > > >
> > > > > Without your patches, everything works fine on H6, and I never see
> > > > > crashes/lockups.
> > > > >
> > > > > I tired physically covering the IR receiver, and that helps
> > > > > preventing the
> > > > > crash. As soon as I uncover it, the crash happens again in 1s or so:
> > > > >
> > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > rcu:0-: (1 GPs behind) idle=4ea/0/0x3 softirq=4483/4484
> > > > > fqs=2444
> > > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > > rcu:0-: (1 GPs behind) idle=4ea/0/0x3 softirq=4483/4484
> > > > > fqs=9777
> > > > >
> > > > > This time I got the hung task and reboot: (probably not directly
> > > > > related)
> > > > >
> > > > > INFO: task find:560 blocked for more than 120 seconds.
> > > > > Not tainted 5.2.0-rc2+ #7
> > > > > "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
> > > > > message.
> > > > > findD0 560551 0x
> > > > > Call trace:
> > > > > __switch_to+0x6c/0x90
> > > > > __schedule+0x1f4/0x578
> > > > > schedule+0x28/0xa8
> > > > > io_schedule+0x18/0x38
> > > > > __lock_page+0x12c/0x208
> > > > > pagecache_get_page+0x238/0x2e8
> > > > > __get_node_page+0x6c/0x310
> > > > > f2fs_get_node_page+0x14/0x20
> > > > > f2fs_iget+0x70/0xc60
> > > > > f2fs_lookup+0xcc/0x218
> > > > > __lookup_slow+0x78/0x160
> > > > > lookup_slow+0x3c/0x60
> > > > > walk_component+0x1e4/0x2e0
> > > > > path_lookupat.isra.13+0x5c/0x1e0
> > > > > filename_lookup.part.23+0x6c/0xe8
> > > > > user_path_at_empty+0x4c/0x60
> > > > > vfs_statx+0x78/0xd8
> > > > > __se_sys_newfstatat+0x24/0x48
> > > > > __arm64_sys_newfstatat+0x18/0x20
> > > > > el0_svc_handler+0x9c/0x170
> > > > > el0_svc+0x8/0xc
> > > > > Kernel panic - not syncing: hung_task: blocked tasks
> > > > > CPU: 1 PID: 34 Comm: khungtaskd Not tainted 5.2.0-rc2+ #7
> > > > > Hardware name: OrangePi 3 (DT)
> > > > > Call trace:
> > > > > dump_backtrace+0x0/0xf8
> > > > > show_stack+0x14/0x20
> > > > > dump_stack+0xa8/0xcc
> > > > > panic+0x124/0x2dc
> > > > > proc_dohung_task_timeout_secs+0x0/0x40
> > > > > kthread+0x120/0x128
> > > > > ret_from_fork+0x10/0x18
> > > > > SMP: stopping secondary CPUs
> > > > > Kernel Offset: disabled
> > >
Re: [linux-sunxi] Re: [PATCH v2 00/10] Allwinner A64/H6 IR support
Hi Ondřej,
On Mon, 27 May 2019 at 21:53, 'Ondřej Jirman' via linux-sunxi
wrote:
>
> Hi Clément,
>
> On Mon, May 27, 2019 at 09:30:16PM +0200, verejna wrote:
> > Hi Clément,
> >
> > On Mon, May 27, 2019 at 08:49:59PM +0200, Clément Péron wrote:
> > > Hi Ondrej,
> > >
> > > >
> > > > I'm testing on Orange Pi 3.
> > > >
> > > > With your patches, I get kernel lockup after ~1 minute of use (ssh stops
> > > > responding/serial console stops responding). I don't have RC controller
> > > > to test
> > > > the CIR. But just enabling the CIR causes kernel to hang shortly after
> > > > boot.
> > > >
> > > > I tried booting multiple times. Other results:
> > > >
> > > > boot 2:
> > > >
> > > > - ssh hangs even before connecting (ethernet crashes/is reset)
> > > >
> > > > INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091 fqs=2437
> > > > dwmac-sun8i 502.ethernet eth0: Reset adapter.
> > > > rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-... }
> > > > 5696 jiffies s: 81 root: 0x1/.
> > > > rcu: blocking rcu_node structures:
> > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091 fqs=9714
> > > > rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-... }
> > > > 21568 jiffies s: 81 root: 0x1/.
> > > > rcu: blocking rcu_node structures:
> > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091
> > > > fqs=17203
> > > >
> > > > above messages appear regularly.
> > > >
> > > > boot 3:
> > > >
> > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > rcu:0-: (9 GPs behind) idle=992/0/0x3 softirq=6123/6123 fqs=2600
> > > >
> > > >
> > > > Sometimes serial console keeps working. Sometimes it locks up too (but
> > > > not
> > > > frequently). Storage locks up always (any program that was not run
> > > > before
> > > > the crash can't be started and lock up the kernel hard, programs that
> > > > were executed prior, can be run again).
> > > >
> > > >
> > > > Exactly the same kernel build on H5 seems to work (or at least I was
> > > > not able to
> > > > trigger the crash). So this seems to be limited to H6 for now.
> > > >
> > > > I suspect that the crash occurs sooner if I vary the light (turn on/off
> > > > the table
> > > > lamp light).
> > > >
> > > > Without your patches, everything works fine on H6, and I never see
> > > > crashes/lockups.
> > > >
> > > > I tired physically covering the IR receiver, and that helps preventing
> > > > the
> > > > crash. As soon as I uncover it, the crash happens again in 1s or so:
> > > >
> > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > rcu:0-: (1 GPs behind) idle=4ea/0/0x3 softirq=4483/4484 fqs=2444
> > > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > > rcu:0-: (1 GPs behind) idle=4ea/0/0x3 softirq=4483/4484 fqs=9777
> > > >
> > > > This time I got the hung task and reboot: (probably not directly
> > > > related)
> > > >
> > > > INFO: task find:560 blocked for more than 120 seconds.
> > > > Not tainted 5.2.0-rc2+ #7
> > > > "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
> > > > message.
> > > > findD0 560551 0x
> > > > Call trace:
> > > > __switch_to+0x6c/0x90
> > > > __schedule+0x1f4/0x578
> > > > schedule+0x28/0xa8
> > > > io_schedule+0x18/0x38
> > > > __lock_page+0x12c/0x208
> > > > pagecache_get_page+0x238/0x2e8
> > > > __get_node_page+0x6c/0x310
> > > > f2fs_get_node_page+0x14/0x20
> > > > f2fs_iget+0x70/0xc60
> > > > f2fs_lookup+0xcc/0x218
> > > > __lookup_slow+0x78/0x160
> > > > lookup_slow+0x3c/0x60
> > > > walk_component+0x1e4/0x2e0
> > > > path_lookupat.isra.13+0x5c/0x1e0
> > > > filename_lookup.part.23+0x6c/0xe8
> > > > user_path_at_empty+0x4c/0x60
> > > > vfs_statx+0x78/0xd8
> > > > __se_sys_newfstatat+0x24/0x48
> > > > __arm64_sys_newfstatat+0x18/0x20
> > > > el0_svc_handler+0x9c/0x170
> > > > el0_svc+0x8/0xc
> > > > Kernel panic - not syncing: hung_task: blocked tasks
> > > > CPU: 1 PID: 34 Comm: khungtaskd Not tainted 5.2.0-rc2+ #7
> > > > Hardware name: OrangePi 3 (DT)
> > > > Call trace:
> > > > dump_backtrace+0x0/0xf8
> > > > show_stack+0x14/0x20
> > > > dump_stack+0xa8/0xcc
> > > > panic+0x124/0x2dc
> > > > proc_dohung_task_timeout_secs+0x0/0x40
> > > > kthread+0x120/0x128
> > > > ret_from_fork+0x10/0x18
> > > > SMP: stopping secondary CPUs
> > > > Kernel Offset: disabled
> > > > CPU features: 0x0002,20002000
> > > > Memory Limit: none
> > > > Rebooting in 3 seconds..
> > > >
> > > >
> > > > Meanwhile H5 based board now runs for 15 minutes without issues.
> > > >
> > > > So to sum up:
> > > >
> > > > - these crashes are definitely H6 IR related
> > > > - the same kernel, on H5 works
> > > > - covering the sensor prevents the crashes on H6
> > > >
> > > >
Re: [PATCH v2 00/10] Allwinner A64/H6 IR support
Hi Clément,
On Mon, May 27, 2019 at 09:30:16PM +0200, verejna wrote:
> Hi Clément,
>
> On Mon, May 27, 2019 at 08:49:59PM +0200, Clément Péron wrote:
> > Hi Ondrej,
> >
> > >
> > > I'm testing on Orange Pi 3.
> > >
> > > With your patches, I get kernel lockup after ~1 minute of use (ssh stops
> > > responding/serial console stops responding). I don't have RC controller
> > > to test
> > > the CIR. But just enabling the CIR causes kernel to hang shortly after
> > > boot.
> > >
> > > I tried booting multiple times. Other results:
> > >
> > > boot 2:
> > >
> > > - ssh hangs even before connecting (ethernet crashes/is reset)
> > >
> > > INFO: rcu_sched detected stalls on CPUs/tasks:
> > > rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091 fqs=2437
> > > dwmac-sun8i 502.ethernet eth0: Reset adapter.
> > > rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-... }
> > > 5696 jiffies s: 81 root: 0x1/.
> > > rcu: blocking rcu_node structures:
> > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091 fqs=9714
> > > rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-... }
> > > 21568 jiffies s: 81 root: 0x1/.
> > > rcu: blocking rcu_node structures:
> > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091 fqs=17203
> > >
> > > above messages appear regularly.
> > >
> > > boot 3:
> > >
> > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > rcu:0-: (9 GPs behind) idle=992/0/0x3 softirq=6123/6123 fqs=2600
> > >
> > >
> > > Sometimes serial console keeps working. Sometimes it locks up too (but not
> > > frequently). Storage locks up always (any program that was not run before
> > > the crash can't be started and lock up the kernel hard, programs that
> > > were executed prior, can be run again).
> > >
> > >
> > > Exactly the same kernel build on H5 seems to work (or at least I was not
> > > able to
> > > trigger the crash). So this seems to be limited to H6 for now.
> > >
> > > I suspect that the crash occurs sooner if I vary the light (turn on/off
> > > the table
> > > lamp light).
> > >
> > > Without your patches, everything works fine on H6, and I never see
> > > crashes/lockups.
> > >
> > > I tired physically covering the IR receiver, and that helps preventing the
> > > crash. As soon as I uncover it, the crash happens again in 1s or so:
> > >
> > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > rcu:0-: (1 GPs behind) idle=4ea/0/0x3 softirq=4483/4484 fqs=2444
> > > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > > rcu:0-: (1 GPs behind) idle=4ea/0/0x3 softirq=4483/4484 fqs=9777
> > >
> > > This time I got the hung task and reboot: (probably not directly related)
> > >
> > > INFO: task find:560 blocked for more than 120 seconds.
> > > Not tainted 5.2.0-rc2+ #7
> > > "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> > > findD0 560551 0x
> > > Call trace:
> > > __switch_to+0x6c/0x90
> > > __schedule+0x1f4/0x578
> > > schedule+0x28/0xa8
> > > io_schedule+0x18/0x38
> > > __lock_page+0x12c/0x208
> > > pagecache_get_page+0x238/0x2e8
> > > __get_node_page+0x6c/0x310
> > > f2fs_get_node_page+0x14/0x20
> > > f2fs_iget+0x70/0xc60
> > > f2fs_lookup+0xcc/0x218
> > > __lookup_slow+0x78/0x160
> > > lookup_slow+0x3c/0x60
> > > walk_component+0x1e4/0x2e0
> > > path_lookupat.isra.13+0x5c/0x1e0
> > > filename_lookup.part.23+0x6c/0xe8
> > > user_path_at_empty+0x4c/0x60
> > > vfs_statx+0x78/0xd8
> > > __se_sys_newfstatat+0x24/0x48
> > > __arm64_sys_newfstatat+0x18/0x20
> > > el0_svc_handler+0x9c/0x170
> > > el0_svc+0x8/0xc
> > > Kernel panic - not syncing: hung_task: blocked tasks
> > > CPU: 1 PID: 34 Comm: khungtaskd Not tainted 5.2.0-rc2+ #7
> > > Hardware name: OrangePi 3 (DT)
> > > Call trace:
> > > dump_backtrace+0x0/0xf8
> > > show_stack+0x14/0x20
> > > dump_stack+0xa8/0xcc
> > > panic+0x124/0x2dc
> > > proc_dohung_task_timeout_secs+0x0/0x40
> > > kthread+0x120/0x128
> > > ret_from_fork+0x10/0x18
> > > SMP: stopping secondary CPUs
> > > Kernel Offset: disabled
> > > CPU features: 0x0002,20002000
> > > Memory Limit: none
> > > Rebooting in 3 seconds..
> > >
> > >
> > > Meanwhile H5 based board now runs for 15 minutes without issues.
> > >
> > > So to sum up:
> > >
> > > - these crashes are definitely H6 IR related
> > > - the same kernel, on H5 works
> > > - covering the sensor prevents the crashes on H6
> > >
> > > So we should probably hold on with the series, until this is figured out.
> >
> > Thanks for testing, but I think it's more hardware related.
> > It seems that your IR is flooded or misconfigured for your board.
> > Could you add a simple print in the "sunxi_ir_irq"
>
> Yes, I get flood of IRQs with status = 0x30. (after I turn on the lamp,
> but it persists even after I turn it
Re: [PATCH v2 00/10] Allwinner A64/H6 IR support
Hi Clément,
On Mon, May 27, 2019 at 08:49:59PM +0200, Clément Péron wrote:
> Hi Ondrej,
>
> >
> > I'm testing on Orange Pi 3.
> >
> > With your patches, I get kernel lockup after ~1 minute of use (ssh stops
> > responding/serial console stops responding). I don't have RC controller to
> > test
> > the CIR. But just enabling the CIR causes kernel to hang shortly after boot.
> >
> > I tried booting multiple times. Other results:
> >
> > boot 2:
> >
> > - ssh hangs even before connecting (ethernet crashes/is reset)
> >
> > INFO: rcu_sched detected stalls on CPUs/tasks:
> > rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091 fqs=2437
> > dwmac-sun8i 502.ethernet eth0: Reset adapter.
> > rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-... }
> > 5696 jiffies s: 81 root: 0x1/.
> > rcu: blocking rcu_node structures:
> > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091 fqs=9714
> > rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-... }
> > 21568 jiffies s: 81 root: 0x1/.
> > rcu: blocking rcu_node structures:
> > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091 fqs=17203
> >
> > above messages appear regularly.
> >
> > boot 3:
> >
> > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > rcu:0-: (9 GPs behind) idle=992/0/0x3 softirq=6123/6123 fqs=2600
> >
> >
> > Sometimes serial console keeps working. Sometimes it locks up too (but not
> > frequently). Storage locks up always (any program that was not run before
> > the crash can't be started and lock up the kernel hard, programs that
> > were executed prior, can be run again).
> >
> >
> > Exactly the same kernel build on H5 seems to work (or at least I was not
> > able to
> > trigger the crash). So this seems to be limited to H6 for now.
> >
> > I suspect that the crash occurs sooner if I vary the light (turn on/off the
> > table
> > lamp light).
> >
> > Without your patches, everything works fine on H6, and I never see
> > crashes/lockups.
> >
> > I tired physically covering the IR receiver, and that helps preventing the
> > crash. As soon as I uncover it, the crash happens again in 1s or so:
> >
> > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > rcu:0-: (1 GPs behind) idle=4ea/0/0x3 softirq=4483/4484 fqs=2444
> > rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> > rcu:0-: (1 GPs behind) idle=4ea/0/0x3 softirq=4483/4484 fqs=9777
> >
> > This time I got the hung task and reboot: (probably not directly related)
> >
> > INFO: task find:560 blocked for more than 120 seconds.
> > Not tainted 5.2.0-rc2+ #7
> > "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> > findD0 560551 0x
> > Call trace:
> > __switch_to+0x6c/0x90
> > __schedule+0x1f4/0x578
> > schedule+0x28/0xa8
> > io_schedule+0x18/0x38
> > __lock_page+0x12c/0x208
> > pagecache_get_page+0x238/0x2e8
> > __get_node_page+0x6c/0x310
> > f2fs_get_node_page+0x14/0x20
> > f2fs_iget+0x70/0xc60
> > f2fs_lookup+0xcc/0x218
> > __lookup_slow+0x78/0x160
> > lookup_slow+0x3c/0x60
> > walk_component+0x1e4/0x2e0
> > path_lookupat.isra.13+0x5c/0x1e0
> > filename_lookup.part.23+0x6c/0xe8
> > user_path_at_empty+0x4c/0x60
> > vfs_statx+0x78/0xd8
> > __se_sys_newfstatat+0x24/0x48
> > __arm64_sys_newfstatat+0x18/0x20
> > el0_svc_handler+0x9c/0x170
> > el0_svc+0x8/0xc
> > Kernel panic - not syncing: hung_task: blocked tasks
> > CPU: 1 PID: 34 Comm: khungtaskd Not tainted 5.2.0-rc2+ #7
> > Hardware name: OrangePi 3 (DT)
> > Call trace:
> > dump_backtrace+0x0/0xf8
> > show_stack+0x14/0x20
> > dump_stack+0xa8/0xcc
> > panic+0x124/0x2dc
> > proc_dohung_task_timeout_secs+0x0/0x40
> > kthread+0x120/0x128
> > ret_from_fork+0x10/0x18
> > SMP: stopping secondary CPUs
> > Kernel Offset: disabled
> > CPU features: 0x0002,20002000
> > Memory Limit: none
> > Rebooting in 3 seconds..
> >
> >
> > Meanwhile H5 based board now runs for 15 minutes without issues.
> >
> > So to sum up:
> >
> > - these crashes are definitely H6 IR related
> > - the same kernel, on H5 works
> > - covering the sensor prevents the crashes on H6
> >
> > So we should probably hold on with the series, until this is figured out.
>
> Thanks for testing, but I think it's more hardware related.
> It seems that your IR is flooded or misconfigured for your board.
> Could you add a simple print in the "sunxi_ir_irq"
Yes, I get flood of IRQs with status = 0x30. (after I turn on the lamp,
but it persists even after I turn it off and cover the IR sensor).
That's weird, because on H6 in CIR_RXSTA, bit 5 is undefined but corresponding
bit in CIR_RXINT is DRQ_EN (RX FIFO DMA Enable)
So I'm not sure what it could be flooded with and why IRQs keep being
fired, even with no sensor input after the FIFO is read.
regards,
o.
> If it's confirmed, maybe
Re: [PATCH v2 00/10] Allwinner A64/H6 IR support
Hi Ondrej,
On Mon, 27 May 2019 at 19:23, Ondřej Jirman wrote:
>
> Hi Clément,
>
> On Mon, May 27, 2019 at 06:31:17PM +0200, verejna wrote:
> > Hi Clément,
> >
> > On Mon, May 27, 2019 at 04:59:35PM +0200, Clément Péron wrote:
> > > Hi Ondřej,
> > >
> > > On Mon, 27 May 2019 at 15:48, Ondřej Jirman wrote:
> > > >
> > > > Hi Clément,
> > > >
> > > > On Mon, May 27, 2019 at 12:25:26AM +0200, Clément Péron wrote:
> > > > > Hi,
> > > > >
> > > > > A64 IR support series[1] pointed out that an A31 bindings should be
> > > > > introduced.
> > > > >
> > > > > This series introduce the A31 compatible bindings, then switch it on
> > > > > the already existing board.
> > > > >
> > > > > Finally introduce A64 and H6 support.
> > > >
> > > > Does H6 support actually work? I don't see any driver changes and last
> > > > time
> > > > I tried with the exact same bindings, I got RCU stalls shortly after
> > > > boot.
> > >
> > > Actually, I have tested only on H6 on my Beelink GS1 with a "NEC" remote.
> > >
> > > I have manually toggle the protocols and do a simple cat in
> > > /dev/input/event0
> > > # echo nec > /sys/class/rc/rc0/protocols
> > > # cat /dev/input/event0 | hexdump
> > > 000 0093 8bfb 0009
> > > 010 0004 0004 8028 0093
> > > 020 8bfb 0009
> > > 030 0093 55be 000a
> > > 040 0004 0004 8028 0093
> > > 050 55be 000a
> > > 060 0093 fa42 000d
> > > 070 0004 0004 8028 0093
> > > 080 fa42 000d
> > > 090 0093 c41a 000e
> > > 0a0 0004 0004 8028 0093
> > > 0b0 c41a 000e
> > >
> > >
> > > Which kernel did you test with? Do you have any log?
> >
> > I tested with my kernel (https://megous.com/git/linux/log/?h=opi3-5.2). I
> > also
> > tried with 5.1 and the same kernel build on H5, to exclude some early 5.2-rc
> > bugs and to see if this is H6 specific.
> >
> > I'll try testing again with your patches, and get you some logs. But last
> > time
> > they were not very informative.
>
> I'm testing on Orange Pi 3.
>
> With your patches, I get kernel lockup after ~1 minute of use (ssh stops
> responding/serial console stops responding). I don't have RC controller to
> test
> the CIR. But just enabling the CIR causes kernel to hang shortly after boot.
>
> I tried booting multiple times. Other results:
>
> boot 2:
>
> - ssh hangs even before connecting (ethernet crashes/is reset)
>
> INFO: rcu_sched detected stalls on CPUs/tasks:
> rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091 fqs=2437
> dwmac-sun8i 502.ethernet eth0: Reset adapter.
> rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-... } 5696
> jiffies s: 81 root: 0x1/.
> rcu: blocking rcu_node structures:
> rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091 fqs=9714
> rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-... } 21568
> jiffies s: 81 root: 0x1/.
> rcu: blocking rcu_node structures:
> rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091 fqs=17203
>
> above messages appear regularly.
>
> boot 3:
>
> rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> rcu:0-: (9 GPs behind) idle=992/0/0x3 softirq=6123/6123 fqs=2600
>
>
> Sometimes serial console keeps working. Sometimes it locks up too (but not
> frequently). Storage locks up always (any program that was not run before
> the crash can't be started and lock up the kernel hard, programs that
> were executed prior, can be run again).
>
>
> Exactly the same kernel build on H5 seems to work (or at least I was not able
> to
> trigger the crash). So this seems to be limited to H6 for now.
>
> I suspect that the crash occurs sooner if I vary the light (turn on/off the
> table
> lamp light).
>
> Without your patches, everything works fine on H6, and I never see
> crashes/lockups.
>
> I tired physically covering the IR receiver, and that helps preventing the
> crash. As soon as I uncover it, the crash happens again in 1s or so:
>
> rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> rcu:0-: (1 GPs behind) idle=4ea/0/0x3 softirq=4483/4484 fqs=2444
> rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> rcu:0-: (1 GPs behind) idle=4ea/0/0x3 softirq=4483/4484 fqs=9777
>
> This time I got the hung task and reboot: (probably not directly related)
>
> INFO: task find:560 blocked for more than 120 seconds.
> Not tainted 5.2.0-rc2+ #7
> "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> findD0 560551 0x
> Call trace:
> __switch_to+0x6c/0x90
> __schedule+0x1f4/0x578
> schedule+0x28/0xa8
>
Re: [PATCH v2 00/10] Allwinner A64/H6 IR support
Hi Clément,
On Mon, May 27, 2019 at 06:31:17PM +0200, verejna wrote:
> Hi Clément,
>
> On Mon, May 27, 2019 at 04:59:35PM +0200, Clément Péron wrote:
> > Hi Ondřej,
> >
> > On Mon, 27 May 2019 at 15:48, Ondřej Jirman wrote:
> > >
> > > Hi Clément,
> > >
> > > On Mon, May 27, 2019 at 12:25:26AM +0200, Clément Péron wrote:
> > > > Hi,
> > > >
> > > > A64 IR support series[1] pointed out that an A31 bindings should be
> > > > introduced.
> > > >
> > > > This series introduce the A31 compatible bindings, then switch it on
> > > > the already existing board.
> > > >
> > > > Finally introduce A64 and H6 support.
> > >
> > > Does H6 support actually work? I don't see any driver changes and last
> > > time
> > > I tried with the exact same bindings, I got RCU stalls shortly after boot.
> >
> > Actually, I have tested only on H6 on my Beelink GS1 with a "NEC" remote.
> >
> > I have manually toggle the protocols and do a simple cat in
> > /dev/input/event0
> > # echo nec > /sys/class/rc/rc0/protocols
> > # cat /dev/input/event0 | hexdump
> > 000 0093 8bfb 0009
> > 010 0004 0004 8028 0093
> > 020 8bfb 0009
> > 030 0093 55be 000a
> > 040 0004 0004 8028 0093
> > 050 55be 000a
> > 060 0093 fa42 000d
> > 070 0004 0004 8028 0093
> > 080 fa42 000d
> > 090 0093 c41a 000e
> > 0a0 0004 0004 8028 0093
> > 0b0 c41a 000e
> >
> >
> > Which kernel did you test with? Do you have any log?
>
> I tested with my kernel (https://megous.com/git/linux/log/?h=opi3-5.2). I also
> tried with 5.1 and the same kernel build on H5, to exclude some early 5.2-rc
> bugs and to see if this is H6 specific.
>
> I'll try testing again with your patches, and get you some logs. But last time
> they were not very informative.
I'm testing on Orange Pi 3.
With your patches, I get kernel lockup after ~1 minute of use (ssh stops
responding/serial console stops responding). I don't have RC controller to test
the CIR. But just enabling the CIR causes kernel to hang shortly after boot.
I tried booting multiple times. Other results:
boot 2:
- ssh hangs even before connecting (ethernet crashes/is reset)
INFO: rcu_sched detected stalls on CPUs/tasks:
rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091 fqs=2437
dwmac-sun8i 502.ethernet eth0: Reset adapter.
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-... } 5696
jiffies s: 81 root: 0x1/.
rcu: blocking rcu_node structures:
rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091 fqs=9714
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-... } 21568
jiffies s: 81 root: 0x1/.
rcu: blocking rcu_node structures:
rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
rcu:0-: (1 GPs behind) idle=64a/0/0x3 softirq=4091/4091 fqs=17203
above messages appear regularly.
boot 3:
rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
rcu:0-: (9 GPs behind) idle=992/0/0x3 softirq=6123/6123 fqs=2600
Sometimes serial console keeps working. Sometimes it locks up too (but not
frequently). Storage locks up always (any program that was not run before
the crash can't be started and lock up the kernel hard, programs that
were executed prior, can be run again).
Exactly the same kernel build on H5 seems to work (or at least I was not able to
trigger the crash). So this seems to be limited to H6 for now.
I suspect that the crash occurs sooner if I vary the light (turn on/off the
table
lamp light).
Without your patches, everything works fine on H6, and I never see
crashes/lockups.
I tired physically covering the IR receiver, and that helps preventing the
crash. As soon as I uncover it, the crash happens again in 1s or so:
rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
rcu:0-: (1 GPs behind) idle=4ea/0/0x3 softirq=4483/4484 fqs=2444
rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
rcu:0-: (1 GPs behind) idle=4ea/0/0x3 softirq=4483/4484 fqs=9777
This time I got the hung task and reboot: (probably not directly related)
INFO: task find:560 blocked for more than 120 seconds.
Not tainted 5.2.0-rc2+ #7
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
findD0 560551 0x
Call trace:
__switch_to+0x6c/0x90
__schedule+0x1f4/0x578
schedule+0x28/0xa8
io_schedule+0x18/0x38
__lock_page+0x12c/0x208
pagecache_get_page+0x238/0x2e8
__get_node_page+0x6c/0x310
f2fs_get_node_page+0x14/0x20
f2fs_iget+0x70/0xc60
f2fs_lookup+0xcc/0x218
__lookup_slow+0x78/0x160
lookup_slow+0x3c/0x60
walk_component+0x1e4/0x2e0
path_lookupat.isra.13+0x5c/0x1e0
filename_lookup.part.23+0x6c/0xe8
Re: [PATCH v2 00/10] Allwinner A64/H6 IR support
Hi Clément, On Mon, May 27, 2019 at 04:59:35PM +0200, Clément Péron wrote: > Hi Ondřej, > > On Mon, 27 May 2019 at 15:48, Ondřej Jirman wrote: > > > > Hi Clément, > > > > On Mon, May 27, 2019 at 12:25:26AM +0200, Clément Péron wrote: > > > Hi, > > > > > > A64 IR support series[1] pointed out that an A31 bindings should be > > > introduced. > > > > > > This series introduce the A31 compatible bindings, then switch it on > > > the already existing board. > > > > > > Finally introduce A64 and H6 support. > > > > Does H6 support actually work? I don't see any driver changes and last time > > I tried with the exact same bindings, I got RCU stalls shortly after boot. > > Actually, I have tested only on H6 on my Beelink GS1 with a "NEC" remote. > > I have manually toggle the protocols and do a simple cat in /dev/input/event0 > # echo nec > /sys/class/rc/rc0/protocols > # cat /dev/input/event0 | hexdump > 000 0093 8bfb 0009 > 010 0004 0004 8028 0093 > 020 8bfb 0009 > 030 0093 55be 000a > 040 0004 0004 8028 0093 > 050 55be 000a > 060 0093 fa42 000d > 070 0004 0004 8028 0093 > 080 fa42 000d > 090 0093 c41a 000e > 0a0 0004 0004 8028 0093 > 0b0 c41a 000e > > > Which kernel did you test with? Do you have any log? I tested with my kernel (https://megous.com/git/linux/log/?h=opi3-5.2). I also tried with 5.1 and the same kernel build on H5, to exclude some early 5.2-rc bugs and to see if this is H6 specific. I'll try testing again with your patches, and get you some logs. But last time they were not very informative. regards, o. > Thanks, > Clément > > > > > Enabling/disabling ir node was enough to trigger/stop the RCU stalls on H6. > > > > regards, > > o. > > > > > Regards, > > > Clément > > > > > > [1] https://lore.kernel.org/patchwork/patch/1031390/#1221464 > > > > > > Changes since v1: > > > - Document reset lines as required since A31 > > > - Explain the memory mapping difference in commit log > > > - Fix misspelling "Allwiner" to "Allwinner" > > > > > > Clément Péron (8): > > > dt-bindings: media: sunxi-ir: add A31 compatible > > > media: rc: sunxi: Add A31 compatible > > > ARM: dts: sunxi: prefer A31 instead of A13 for ir > > > dt-bindings: media: sunxi-ir: Add A64 compatible > > > dt-bindings: media: sunxi-ir: Add H6 compatible > > > arm64: dts: allwinner: h6: Add IR receiver node > > > arm64: dts: allwinner: h6: Enable IR on H6 boards > > > arm64: defconfig: enable IR SUNXI option > > > > > > Igors Makejevs (1): > > > arm64: dts: allwinner: a64: Add IR node > > > > > > Jernej Skrabec (1): > > > arm64: dts: allwinner: a64: Enable IR on Orange Pi Win > > > > > > .../devicetree/bindings/media/sunxi-ir.txt| 11 +-- > > > arch/arm/boot/dts/sun6i-a31.dtsi | 2 +- > > > arch/arm/boot/dts/sun8i-a83t.dtsi | 2 +- > > > arch/arm/boot/dts/sun9i-a80.dtsi | 2 +- > > > arch/arm/boot/dts/sunxi-h3-h5.dtsi| 2 +- > > > .../dts/allwinner/sun50i-a64-orangepi-win.dts | 4 > > > arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 18 ++ > > > .../dts/allwinner/sun50i-h6-beelink-gs1.dts | 4 > > > .../dts/allwinner/sun50i-h6-orangepi.dtsi | 4 > > > .../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 4 > > > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 19 +++ > > > arch/arm64/configs/defconfig | 1 + > > > drivers/media/rc/sunxi-cir.c | 1 + > > > 13 files changed, 68 insertions(+), 6 deletions(-) > > > > > > -- > > > 2.20.1 > > > > > > > > > ___ > > > linux-arm-kernel mailing list > > > linux-arm-ker...@lists.infradead.org > > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > > ___ > linux-arm-kernel mailing list > linux-arm-ker...@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v2 00/10] Allwinner A64/H6 IR support
Hi Ondřej, On Mon, 27 May 2019 at 15:48, Ondřej Jirman wrote: > > Hi Clément, > > On Mon, May 27, 2019 at 12:25:26AM +0200, Clément Péron wrote: > > Hi, > > > > A64 IR support series[1] pointed out that an A31 bindings should be > > introduced. > > > > This series introduce the A31 compatible bindings, then switch it on > > the already existing board. > > > > Finally introduce A64 and H6 support. > > Does H6 support actually work? I don't see any driver changes and last time > I tried with the exact same bindings, I got RCU stalls shortly after boot. Actually, I have tested only on H6 on my Beelink GS1 with a "NEC" remote. I have manually toggle the protocols and do a simple cat in /dev/input/event0 # echo nec > /sys/class/rc/rc0/protocols # cat /dev/input/event0 | hexdump 000 0093 8bfb 0009 010 0004 0004 8028 0093 020 8bfb 0009 030 0093 55be 000a 040 0004 0004 8028 0093 050 55be 000a 060 0093 fa42 000d 070 0004 0004 8028 0093 080 fa42 000d 090 0093 c41a 000e 0a0 0004 0004 8028 0093 0b0 c41a 000e Which kernel did you test with? Do you have any log? Thanks, Clément > > Enabling/disabling ir node was enough to trigger/stop the RCU stalls on H6. > > regards, > o. > > > Regards, > > Clément > > > > [1] https://lore.kernel.org/patchwork/patch/1031390/#1221464 > > > > Changes since v1: > > - Document reset lines as required since A31 > > - Explain the memory mapping difference in commit log > > - Fix misspelling "Allwiner" to "Allwinner" > > > > Clément Péron (8): > > dt-bindings: media: sunxi-ir: add A31 compatible > > media: rc: sunxi: Add A31 compatible > > ARM: dts: sunxi: prefer A31 instead of A13 for ir > > dt-bindings: media: sunxi-ir: Add A64 compatible > > dt-bindings: media: sunxi-ir: Add H6 compatible > > arm64: dts: allwinner: h6: Add IR receiver node > > arm64: dts: allwinner: h6: Enable IR on H6 boards > > arm64: defconfig: enable IR SUNXI option > > > > Igors Makejevs (1): > > arm64: dts: allwinner: a64: Add IR node > > > > Jernej Skrabec (1): > > arm64: dts: allwinner: a64: Enable IR on Orange Pi Win > > > > .../devicetree/bindings/media/sunxi-ir.txt| 11 +-- > > arch/arm/boot/dts/sun6i-a31.dtsi | 2 +- > > arch/arm/boot/dts/sun8i-a83t.dtsi | 2 +- > > arch/arm/boot/dts/sun9i-a80.dtsi | 2 +- > > arch/arm/boot/dts/sunxi-h3-h5.dtsi| 2 +- > > .../dts/allwinner/sun50i-a64-orangepi-win.dts | 4 > > arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 18 ++ > > .../dts/allwinner/sun50i-h6-beelink-gs1.dts | 4 > > .../dts/allwinner/sun50i-h6-orangepi.dtsi | 4 > > .../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 4 > > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 19 +++ > > arch/arm64/configs/defconfig | 1 + > > drivers/media/rc/sunxi-cir.c | 1 + > > 13 files changed, 68 insertions(+), 6 deletions(-) > > > > -- > > 2.20.1 > > > > > > ___ > > linux-arm-kernel mailing list > > linux-arm-ker...@lists.infradead.org > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v2 00/10] Allwinner A64/H6 IR support
Hi Clément, On Mon, May 27, 2019 at 12:25:26AM +0200, Clément Péron wrote: > Hi, > > A64 IR support series[1] pointed out that an A31 bindings should be > introduced. > > This series introduce the A31 compatible bindings, then switch it on > the already existing board. > > Finally introduce A64 and H6 support. Does H6 support actually work? I don't see any driver changes and last time I tried with the exact same bindings, I got RCU stalls shortly after boot. Enabling/disabling ir node was enough to trigger/stop the RCU stalls on H6. regards, o. > Regards, > Clément > > [1] https://lore.kernel.org/patchwork/patch/1031390/#1221464 > > Changes since v1: > - Document reset lines as required since A31 > - Explain the memory mapping difference in commit log > - Fix misspelling "Allwiner" to "Allwinner" > > Clément Péron (8): > dt-bindings: media: sunxi-ir: add A31 compatible > media: rc: sunxi: Add A31 compatible > ARM: dts: sunxi: prefer A31 instead of A13 for ir > dt-bindings: media: sunxi-ir: Add A64 compatible > dt-bindings: media: sunxi-ir: Add H6 compatible > arm64: dts: allwinner: h6: Add IR receiver node > arm64: dts: allwinner: h6: Enable IR on H6 boards > arm64: defconfig: enable IR SUNXI option > > Igors Makejevs (1): > arm64: dts: allwinner: a64: Add IR node > > Jernej Skrabec (1): > arm64: dts: allwinner: a64: Enable IR on Orange Pi Win > > .../devicetree/bindings/media/sunxi-ir.txt| 11 +-- > arch/arm/boot/dts/sun6i-a31.dtsi | 2 +- > arch/arm/boot/dts/sun8i-a83t.dtsi | 2 +- > arch/arm/boot/dts/sun9i-a80.dtsi | 2 +- > arch/arm/boot/dts/sunxi-h3-h5.dtsi| 2 +- > .../dts/allwinner/sun50i-a64-orangepi-win.dts | 4 > arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 18 ++ > .../dts/allwinner/sun50i-h6-beelink-gs1.dts | 4 > .../dts/allwinner/sun50i-h6-orangepi.dtsi | 4 > .../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 4 > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 19 +++ > arch/arm64/configs/defconfig | 1 + > drivers/media/rc/sunxi-cir.c | 1 + > 13 files changed, 68 insertions(+), 6 deletions(-) > > -- > 2.20.1 > > > ___ > linux-arm-kernel mailing list > linux-arm-ker...@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
[PATCH v2 00/10] Allwinner A64/H6 IR support
Hi, A64 IR support series[1] pointed out that an A31 bindings should be introduced. This series introduce the A31 compatible bindings, then switch it on the already existing board. Finally introduce A64 and H6 support. Regards, Clément [1] https://lore.kernel.org/patchwork/patch/1031390/#1221464 Changes since v1: - Document reset lines as required since A31 - Explain the memory mapping difference in commit log - Fix misspelling "Allwiner" to "Allwinner" Clément Péron (8): dt-bindings: media: sunxi-ir: add A31 compatible media: rc: sunxi: Add A31 compatible ARM: dts: sunxi: prefer A31 instead of A13 for ir dt-bindings: media: sunxi-ir: Add A64 compatible dt-bindings: media: sunxi-ir: Add H6 compatible arm64: dts: allwinner: h6: Add IR receiver node arm64: dts: allwinner: h6: Enable IR on H6 boards arm64: defconfig: enable IR SUNXI option Igors Makejevs (1): arm64: dts: allwinner: a64: Add IR node Jernej Skrabec (1): arm64: dts: allwinner: a64: Enable IR on Orange Pi Win .../devicetree/bindings/media/sunxi-ir.txt| 11 +-- arch/arm/boot/dts/sun6i-a31.dtsi | 2 +- arch/arm/boot/dts/sun8i-a83t.dtsi | 2 +- arch/arm/boot/dts/sun9i-a80.dtsi | 2 +- arch/arm/boot/dts/sunxi-h3-h5.dtsi| 2 +- .../dts/allwinner/sun50i-a64-orangepi-win.dts | 4 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 18 ++ .../dts/allwinner/sun50i-h6-beelink-gs1.dts | 4 .../dts/allwinner/sun50i-h6-orangepi.dtsi | 4 .../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 4 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 19 +++ arch/arm64/configs/defconfig | 1 + drivers/media/rc/sunxi-cir.c | 1 + 13 files changed, 68 insertions(+), 6 deletions(-) -- 2.20.1
