Re: [PATCH v2 1/5] dt-bindings: pinctrl: Add gpio bindings for Actions S900 SoC
On Sun, May 20, 2018 at 7:17 AM, Manivannan Sadhasivamwrote: > Add gpio bindings for Actions Semi S900 SoC. > > Signed-off-by: Manivannan Sadhasivam Patch applied with Rob's review tag. Yours, Linus Walleij
Re: [PATCH v2 1/5] dt-bindings: pinctrl: Add gpio bindings for Actions S900 SoC
On Sun, May 20, 2018 at 7:17 AM, Manivannan Sadhasivam wrote: > Add gpio bindings for Actions Semi S900 SoC. > > Signed-off-by: Manivannan Sadhasivam Patch applied with Rob's review tag. Yours, Linus Walleij
Re: [PATCH v2 1/5] dt-bindings: pinctrl: Add gpio bindings for Actions S900 SoC
On Sun, May 20, 2018 at 10:47:32AM +0530, Manivannan Sadhasivam wrote: > Add gpio bindings for Actions Semi S900 SoC. > > Signed-off-by: Manivannan Sadhasivam> --- > .../devicetree/bindings/pinctrl/actions,s900-pinctrl.txt | 16 > > 1 file changed, 16 insertions(+) Reviewed-by: Rob Herring
Re: [PATCH v2 1/5] dt-bindings: pinctrl: Add gpio bindings for Actions S900 SoC
On Sun, May 20, 2018 at 10:47:32AM +0530, Manivannan Sadhasivam wrote: > Add gpio bindings for Actions Semi S900 SoC. > > Signed-off-by: Manivannan Sadhasivam > --- > .../devicetree/bindings/pinctrl/actions,s900-pinctrl.txt | 16 > > 1 file changed, 16 insertions(+) Reviewed-by: Rob Herring
[PATCH v2 1/5] dt-bindings: pinctrl: Add gpio bindings for Actions S900 SoC
Add gpio bindings for Actions Semi S900 SoC. Signed-off-by: Manivannan Sadhasivam--- .../devicetree/bindings/pinctrl/actions,s900-pinctrl.txt | 16 1 file changed, 16 insertions(+) diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt index fb87c7d74f2e..8fb5a53775e8 100644 --- a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt @@ -8,6 +8,17 @@ Required Properties: - reg: Should contain the register base address and size of the pin controller. - clocks: phandle of the clock feeding the pin controller +- gpio-controller: Marks the device node as a GPIO controller. +- gpio-ranges: Specifies the mapping between gpio controller and + pin-controller pins. +- #gpio-cells: Should be two. The first cell is the gpio pin number + and the second cell is used for optional parameters. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Specifies the number of cells needed to encode an +interrupt. Shall be set to 2. The first cell +defines the interrupt number, the second encodes +the trigger flags described in +bindings/interrupt-controller/interrupts.txt Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices, including the meaning of the @@ -164,6 +175,11 @@ Example: compatible = "actions,s900-pinctrl"; reg = <0x0 0xe01b 0x0 0x1000>; clocks = < CLK_GPIO>; + gpio-controller; + gpio-ranges = < 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; uart2-default: uart2-default { pinmux { -- 2.14.1
[PATCH v2 1/5] dt-bindings: pinctrl: Add gpio bindings for Actions S900 SoC
Add gpio bindings for Actions Semi S900 SoC. Signed-off-by: Manivannan Sadhasivam --- .../devicetree/bindings/pinctrl/actions,s900-pinctrl.txt | 16 1 file changed, 16 insertions(+) diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt index fb87c7d74f2e..8fb5a53775e8 100644 --- a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt @@ -8,6 +8,17 @@ Required Properties: - reg: Should contain the register base address and size of the pin controller. - clocks: phandle of the clock feeding the pin controller +- gpio-controller: Marks the device node as a GPIO controller. +- gpio-ranges: Specifies the mapping between gpio controller and + pin-controller pins. +- #gpio-cells: Should be two. The first cell is the gpio pin number + and the second cell is used for optional parameters. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Specifies the number of cells needed to encode an +interrupt. Shall be set to 2. The first cell +defines the interrupt number, the second encodes +the trigger flags described in +bindings/interrupt-controller/interrupts.txt Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices, including the meaning of the @@ -164,6 +175,11 @@ Example: compatible = "actions,s900-pinctrl"; reg = <0x0 0xe01b 0x0 0x1000>; clocks = < CLK_GPIO>; + gpio-controller; + gpio-ranges = < 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; uart2-default: uart2-default { pinmux { -- 2.14.1