[PATCH v2 2/2] gpio: designware: add gpio-signaled acpi event for power button
This patch modifies the designware gpio controller driver to
support the gpio-signaled acpi events. This is used for power
button on hisilicon D02 board(an arm64 platform).
The corresponding DSDT table is defined as follows:
Device(GPI0) {
Name(_HID, "HISI0181")
Name(_ADR, 0)
Name(_UID, 0)
Name (_CRS, ResourceTemplate () {
Memory32Fixed (ReadWrite, 0x802e, 0x1)
Interrupt (ResourceConsumer, Level, ActiveHigh,
Exclusive,,,) {344}
})
Device(PRTa) {
Name (_DSD, Package () {
Package () {
Package () {"reg",0},
Package () {"snps,nr-gpios",32},
}
})
}
Name (_AEI, ResourceTemplate () {
GpioInt(Edge, ActiveLow, ExclusiveAndWake, PullUp, ,
" \\_SB.GPI0") {8}
})
Method (_E08, 0x0, NotSerialized) {
Notify (\_SB.PWRB, 0x80)
}
}
Acked-by: Mika Westerberg
Signed-off-by: qiujiang
---
drivers/gpio/gpio-dwapb.c | 38 +++---
1 file changed, 27 insertions(+), 11 deletions(-)
diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index 0ebbdf1..d961d3b 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -7,6 +7,7 @@
*
* All enquiries to supp...@picochip.com
*/
+#include
#include
/* FIXME: for gpio_get_value(), replace this with direct register read */
#include
@@ -25,6 +26,7 @@
#include
#include
#include
+#include "gpiolib.h"
#define GPIO_SWPORTA_DR0x00
#define GPIO_SWPORTA_DDR 0x04
@@ -434,6 +436,10 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
else
port->is_registered = true;
+ /* Add GPIO-signaled ACPI event support */
+ if (pp->irq)
+ acpi_gpiochip_request_interrupts(&(port->gc));
+
return err;
}
@@ -447,7 +453,7 @@ static void dwapb_gpio_unregister(struct dwapb_gpio *gpio)
}
static struct dwapb_platform_data *
-dwapb_gpio_get_pdata_of(struct device *dev)
+dwapb_gpio_get_pdata(struct device *dev)
{
struct fwnode_handle *fwnode;
struct dwapb_platform_data *pdata;
@@ -455,9 +461,6 @@ dwapb_gpio_get_pdata_of(struct device *dev)
int nports;
int i;
- if (!IS_ENABLED(CONFIG_OF_GPIO) || !(dev->of_node))
- return ERR_PTR(-ENODEV);
-
nports = device_get_child_node_count(dev);
if (nports == 0)
return ERR_PTR(-ENODEV);
@@ -479,15 +482,13 @@ dwapb_gpio_get_pdata_of(struct device *dev)
if (fwnode_property_read_u32(fwnode, "reg", >idx) ||
pp->idx >= DWAPB_MAX_PORTS) {
- dev_err(dev, "missing/invalid port index for %s\n",
- to_of_node(fwnode)->full_name);
+ dev_err(dev, "missing/invalid port index\n");
return ERR_PTR(-EINVAL);
}
if (fwnode_property_read_u32(fwnode, "snps,nr-gpios",
>ngpio)) {
- dev_info(dev, "failed to get number of gpios for %s\n",
-to_of_node(fwnode)->full_name);
+ dev_info(dev, "failed to get number of gpios\n");
pp->ngpio = 32;
}
@@ -495,7 +496,7 @@ dwapb_gpio_get_pdata_of(struct device *dev)
* Only port A can provide interrupts in all configurations of
* the IP.
*/
- if (pp->idx == 0 &&
+ if (dev->of_node && pp->idx == 0 &&
of_property_read_bool(to_of_node(fwnode),
"interrupt-controller")) {
pp->irq = irq_of_parse_and_map(to_of_node(fwnode), 0);
@@ -505,9 +506,17 @@ dwapb_gpio_get_pdata_of(struct device *dev)
}
}
+ if (has_acpi_companion(dev) && pp->idx == 0)
+ pp->irq = platform_get_irq(to_platform_device(dev), 0);
+
pp->irq_shared = false;
pp->gpio_base = -1;
- pp->name = to_of_node(fwnode)->full_name;
+
+ if (dev->of_node)
+ pp->name = to_of_node(fwnode)->full_name;
+
+ if (has_acpi_companion(dev))
+ pp->name = acpi_dev_name(to_acpi_device_node(fwnode));
}
return pdata;
@@ -523,7 +532,7 @@ static int dwapb_gpio_probe(struct platform_device *pdev)
struct dwapb_platform_data *pdata = dev_get_platdata(dev);
if (!pdata) {
- pdata = dwapb_gpio_get_pdata_of(dev);
+ pdata = dwapb_gpio_get_pdata(dev);
if
[PATCH v2 2/2] gpio: designware: add gpio-signaled acpi event for power button
This patch modifies the designware gpio controller driver to
support the gpio-signaled acpi events. This is used for power
button on hisilicon D02 board(an arm64 platform).
The corresponding DSDT table is defined as follows:
Device(GPI0) {
Name(_HID, "HISI0181")
Name(_ADR, 0)
Name(_UID, 0)
Name (_CRS, ResourceTemplate () {
Memory32Fixed (ReadWrite, 0x802e, 0x1)
Interrupt (ResourceConsumer, Level, ActiveHigh,
Exclusive,,,) {344}
})
Device(PRTa) {
Name (_DSD, Package () {
Package () {
Package () {"reg",0},
Package () {"snps,nr-gpios",32},
}
})
}
Name (_AEI, ResourceTemplate () {
GpioInt(Edge, ActiveLow, ExclusiveAndWake, PullUp, ,
" \\_SB.GPI0") {8}
})
Method (_E08, 0x0, NotSerialized) {
Notify (\_SB.PWRB, 0x80)
}
}
Acked-by: Mika Westerberg
Signed-off-by: qiujiang
---
drivers/gpio/gpio-dwapb.c | 38 +++---
1 file changed, 27 insertions(+), 11 deletions(-)
diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index 0ebbdf1..d961d3b 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -7,6 +7,7 @@
*
* All enquiries to supp...@picochip.com
*/
+#include
#include
/* FIXME: for gpio_get_value(), replace this with direct register read */
#include
@@ -25,6 +26,7 @@
#include
#include
#include
+#include "gpiolib.h"
#define GPIO_SWPORTA_DR0x00
#define GPIO_SWPORTA_DDR 0x04
@@ -434,6 +436,10 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
else
port->is_registered = true;
+ /* Add GPIO-signaled ACPI event support */
+ if (pp->irq)
+ acpi_gpiochip_request_interrupts(&(port->gc));
+
return err;
}
@@ -447,7 +453,7 @@ static void dwapb_gpio_unregister(struct dwapb_gpio *gpio)
}
static struct dwapb_platform_data *
-dwapb_gpio_get_pdata_of(struct device *dev)
+dwapb_gpio_get_pdata(struct device *dev)
{
struct fwnode_handle *fwnode;
struct dwapb_platform_data *pdata;
@@ -455,9 +461,6 @@ dwapb_gpio_get_pdata_of(struct device *dev)
int nports;
int i;
- if (!IS_ENABLED(CONFIG_OF_GPIO) || !(dev->of_node))
- return ERR_PTR(-ENODEV);
-
nports = device_get_child_node_count(dev);
if (nports == 0)
return ERR_PTR(-ENODEV);
@@ -479,15 +482,13 @@ dwapb_gpio_get_pdata_of(struct device *dev)
if (fwnode_property_read_u32(fwnode, "reg", >idx) ||
pp->idx >= DWAPB_MAX_PORTS) {
- dev_err(dev, "missing/invalid port index for %s\n",
- to_of_node(fwnode)->full_name);
+ dev_err(dev, "missing/invalid port index\n");
return ERR_PTR(-EINVAL);
}
if (fwnode_property_read_u32(fwnode, "snps,nr-gpios",
>ngpio)) {
- dev_info(dev, "failed to get number of gpios for %s\n",
-to_of_node(fwnode)->full_name);
+ dev_info(dev, "failed to get number of gpios\n");
pp->ngpio = 32;
}
@@ -495,7 +496,7 @@ dwapb_gpio_get_pdata_of(struct device *dev)
* Only port A can provide interrupts in all configurations of
* the IP.
*/
- if (pp->idx == 0 &&
+ if (dev->of_node && pp->idx == 0 &&
of_property_read_bool(to_of_node(fwnode),
"interrupt-controller")) {
pp->irq = irq_of_parse_and_map(to_of_node(fwnode), 0);
@@ -505,9 +506,17 @@ dwapb_gpio_get_pdata_of(struct device *dev)
}
}
+ if (has_acpi_companion(dev) && pp->idx == 0)
+ pp->irq = platform_get_irq(to_platform_device(dev), 0);
+
pp->irq_shared = false;
pp->gpio_base = -1;
- pp->name = to_of_node(fwnode)->full_name;
+
+ if (dev->of_node)
+ pp->name = to_of_node(fwnode)->full_name;
+
+ if (has_acpi_companion(dev))
+ pp->name = acpi_dev_name(to_acpi_device_node(fwnode));
}
return pdata;
@@ -523,7 +532,7 @@ static int dwapb_gpio_probe(struct platform_device *pdev)
struct dwapb_platform_data *pdata = dev_get_platdata(dev);
if (!pdata) {
- pdata = dwapb_gpio_get_pdata_of(dev);
+ pdata = dwapb_gpio_get_pdata(dev);
if (IS_ERR(pdata))
return
