Re: [PATCH v2 2/3] i2c: davinci: Add PM Runtime Support
On Tuesday 22 August 2017 06:47 AM, Franklin S Cooper Jr wrote: > > > On 08/21/2017 04:05 AM, Sekhar Nori wrote: >> On Thursday 17 August 2017 03:47 AM, Franklin S Cooper Jr wrote: >> >>> @@ -802,7 +821,6 @@ static int davinci_i2c_probe(struct platform_device >>> *pdev) >>> dev->clk = devm_clk_get(&pdev->dev, NULL); >>> if (IS_ERR(dev->clk)) >>> return PTR_ERR(dev->clk); >>> - clk_prepare_enable(dev->clk); >>> >>> mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); >>> dev->base = devm_ioremap_resource(&pdev->dev, mem); >>> @@ -811,6 +829,18 @@ static int davinci_i2c_probe(struct platform_device >>> *pdev) >>> goto err_unuse_clocks; >> >> This goto is wrong now. There is no need to unwind the pm_runtime setup >> on a devm_ioremap_resource() failure. You can just return error here. > > Ok >> >>> } >>> >>> + pm_runtime_set_autosuspend_delay(dev->dev, >>> +DAVINCI_I2C_PM_TIMEOUT); >>> + pm_runtime_use_autosuspend(dev->dev); >>> + >>> + pm_runtime_enable(dev->dev); >>> + >>> + r = pm_runtime_get_sync(dev->dev); >>> + if (r < 0) { >>> + dev_err(dev->dev, "failed to runtime_get device: %d\n", r); >>> + goto err_unuse_clocks; >>> + } >>> + >>> i2c_davinci_init(dev); >>> >>> r = devm_request_irq(&pdev->dev, dev->irq, i2c_davinci_isr, 0, >>> @@ -849,10 +879,16 @@ static int davinci_i2c_probe(struct platform_device >>> *pdev) >>> if (r) >>> goto err_unuse_clocks; >>> >>> + pm_runtime_mark_last_busy(dev->dev); >>> + pm_runtime_put_autosuspend(dev->dev); >>> + >>> return 0; >>> >>> err_unuse_clocks: >>> - clk_disable_unprepare(dev->clk); >>> + pm_runtime_dont_use_autosuspend(dev->dev); >>> + pm_runtime_put_sync(dev->dev); >>> + pm_runtime_disable(dev->dev); >>> + >>> dev->clk = NULL; >> >> This null setting of clk seems quite bogus and can be cleaned-up. > > Do you mean that I should just remove this line? Yes, and I noticed a similar line in at least one more place that can be removed as well. Thanks, Sekhar
Re: [PATCH v2 2/3] i2c: davinci: Add PM Runtime Support
On 08/21/2017 04:05 AM, Sekhar Nori wrote: > On Thursday 17 August 2017 03:47 AM, Franklin S Cooper Jr wrote: > >> @@ -802,7 +821,6 @@ static int davinci_i2c_probe(struct platform_device >> *pdev) >> dev->clk = devm_clk_get(&pdev->dev, NULL); >> if (IS_ERR(dev->clk)) >> return PTR_ERR(dev->clk); >> -clk_prepare_enable(dev->clk); >> >> mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> dev->base = devm_ioremap_resource(&pdev->dev, mem); >> @@ -811,6 +829,18 @@ static int davinci_i2c_probe(struct platform_device >> *pdev) >> goto err_unuse_clocks; > > This goto is wrong now. There is no need to unwind the pm_runtime setup > on a devm_ioremap_resource() failure. You can just return error here. Ok > >> } >> >> +pm_runtime_set_autosuspend_delay(dev->dev, >> + DAVINCI_I2C_PM_TIMEOUT); >> +pm_runtime_use_autosuspend(dev->dev); >> + >> +pm_runtime_enable(dev->dev); >> + >> +r = pm_runtime_get_sync(dev->dev); >> +if (r < 0) { >> +dev_err(dev->dev, "failed to runtime_get device: %d\n", r); >> +goto err_unuse_clocks; >> +} >> + >> i2c_davinci_init(dev); >> >> r = devm_request_irq(&pdev->dev, dev->irq, i2c_davinci_isr, 0, >> @@ -849,10 +879,16 @@ static int davinci_i2c_probe(struct platform_device >> *pdev) >> if (r) >> goto err_unuse_clocks; >> >> +pm_runtime_mark_last_busy(dev->dev); >> +pm_runtime_put_autosuspend(dev->dev); >> + >> return 0; >> >> err_unuse_clocks: >> -clk_disable_unprepare(dev->clk); >> +pm_runtime_dont_use_autosuspend(dev->dev); >> +pm_runtime_put_sync(dev->dev); >> +pm_runtime_disable(dev->dev); >> + >> dev->clk = NULL; > > This null setting of clk seems quite bogus and can be cleaned-up. Do you mean that I should just remove this line? > >> return r; >> } > > Thanks, > Sekhar >
Re: [PATCH v2 2/3] i2c: davinci: Add PM Runtime Support
Hi Wolfram, On Thursday 17 August 2017 09:54 PM, Wolfram Sang wrote: > On Wed, Aug 16, 2017 at 05:17:14PM -0500, Franklin S Cooper Jr wrote: >> 66AK2G has I2C instances that are not apart of the ALWAYS_ON power domain >> like other Keystone 2 SoCs and OMAPL138. Therefore, pm_runtime >> is required to insure the power domain used by the specific I2C instance is >> properly turned on along with its functional clock. >> >> Signed-off-by: Franklin S Cooper Jr > > I'd need a review from the driver maintainers here. Which are Sekhar > Nori and Kevin Hilman(?) according to MAINTAINERS. Is that still > correct? I just finished the review (sent the comments). Thanks for the reminder! Also, tested the patches using i2cdetect and suspend/resume on OMAP-L138 LCDK board. Regards, Sekhar
Re: [PATCH v2 2/3] i2c: davinci: Add PM Runtime Support
On Thursday 17 August 2017 03:47 AM, Franklin S Cooper Jr wrote: > @@ -802,7 +821,6 @@ static int davinci_i2c_probe(struct platform_device *pdev) > dev->clk = devm_clk_get(&pdev->dev, NULL); > if (IS_ERR(dev->clk)) > return PTR_ERR(dev->clk); > - clk_prepare_enable(dev->clk); > > mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > dev->base = devm_ioremap_resource(&pdev->dev, mem); > @@ -811,6 +829,18 @@ static int davinci_i2c_probe(struct platform_device > *pdev) > goto err_unuse_clocks; This goto is wrong now. There is no need to unwind the pm_runtime setup on a devm_ioremap_resource() failure. You can just return error here. > } > > + pm_runtime_set_autosuspend_delay(dev->dev, > + DAVINCI_I2C_PM_TIMEOUT); > + pm_runtime_use_autosuspend(dev->dev); > + > + pm_runtime_enable(dev->dev); > + > + r = pm_runtime_get_sync(dev->dev); > + if (r < 0) { > + dev_err(dev->dev, "failed to runtime_get device: %d\n", r); > + goto err_unuse_clocks; > + } > + > i2c_davinci_init(dev); > > r = devm_request_irq(&pdev->dev, dev->irq, i2c_davinci_isr, 0, > @@ -849,10 +879,16 @@ static int davinci_i2c_probe(struct platform_device > *pdev) > if (r) > goto err_unuse_clocks; > > + pm_runtime_mark_last_busy(dev->dev); > + pm_runtime_put_autosuspend(dev->dev); > + > return 0; > > err_unuse_clocks: > - clk_disable_unprepare(dev->clk); > + pm_runtime_dont_use_autosuspend(dev->dev); > + pm_runtime_put_sync(dev->dev); > + pm_runtime_disable(dev->dev); > + > dev->clk = NULL; This null setting of clk seems quite bogus and can be cleaned-up. > return r; > } Thanks, Sekhar
Re: [PATCH v2 2/3] i2c: davinci: Add PM Runtime Support
On Wed, Aug 16, 2017 at 05:17:14PM -0500, Franklin S Cooper Jr wrote: > 66AK2G has I2C instances that are not apart of the ALWAYS_ON power domain > like other Keystone 2 SoCs and OMAPL138. Therefore, pm_runtime > is required to insure the power domain used by the specific I2C instance is > properly turned on along with its functional clock. > > Signed-off-by: Franklin S Cooper Jr I'd need a review from the driver maintainers here. Which are Sekhar Nori and Kevin Hilman(?) according to MAINTAINERS. Is that still correct? > --- > Version 2 changes: > Move initial calls to pm runtime autosuspend before pm_runtime_enable > > drivers/i2c/busses/i2c-davinci.c | 62 > ++-- > 1 file changed, 54 insertions(+), 8 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-davinci.c > b/drivers/i2c/busses/i2c-davinci.c > index b8c4353..6b1930d 100644 > --- a/drivers/i2c/busses/i2c-davinci.c > +++ b/drivers/i2c/busses/i2c-davinci.c > @@ -36,6 +36,7 @@ > #include > #include > #include > +#include > > /* - global defines --- */ > > @@ -122,6 +123,9 @@ > /* set the SDA GPIO low */ > #define DAVINCI_I2C_DCLR_PDCLR1 BIT(1) > > +/* timeout for pm runtime autosuspend */ > +#define DAVINCI_I2C_PM_TIMEOUT 1000/* ms */ > + > struct davinci_i2c_dev { > struct device *dev; > void __iomem*base; > @@ -541,10 +545,17 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct > i2c_msg msgs[], int num) > > dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num); > > + ret = pm_runtime_get_sync(dev->dev); > + if (ret < 0) { > + dev_err(dev->dev, "Failed to runtime_get device: %d\n", ret); > + pm_runtime_put_noidle(dev->dev); > + return ret; > + } > + > ret = i2c_davinci_wait_bus_not_busy(dev); > if (ret < 0) { > dev_warn(dev->dev, "timeout waiting for bus ready\n"); > - return ret; > + goto out; > } > > for (i = 0; i < num; i++) { > @@ -552,14 +563,19 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct > i2c_msg msgs[], int num) > dev_dbg(dev->dev, "%s [%d/%d] ret: %d\n", __func__, i + 1, num, > ret); > if (ret < 0) > - return ret; > + goto out; > } > > + ret = num; > #ifdef CONFIG_CPU_FREQ > complete(&dev->xfr_complete); > #endif > > - return num; > +out: > + pm_runtime_mark_last_busy(dev->dev); > + pm_runtime_put_autosuspend(dev->dev); > + > + return ret; > } > > static u32 i2c_davinci_func(struct i2c_adapter *adap) > @@ -599,6 +615,9 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void > *dev_id) > int count = 0; > u16 w; > > + if (pm_runtime_suspended(dev->dev)) > + return IRQ_NONE; > + > while ((stat = davinci_i2c_read_reg(dev, DAVINCI_I2C_IVR_REG))) { > dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat); > if (count++ == 100) { > @@ -802,7 +821,6 @@ static int davinci_i2c_probe(struct platform_device *pdev) > dev->clk = devm_clk_get(&pdev->dev, NULL); > if (IS_ERR(dev->clk)) > return PTR_ERR(dev->clk); > - clk_prepare_enable(dev->clk); > > mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > dev->base = devm_ioremap_resource(&pdev->dev, mem); > @@ -811,6 +829,18 @@ static int davinci_i2c_probe(struct platform_device > *pdev) > goto err_unuse_clocks; > } > > + pm_runtime_set_autosuspend_delay(dev->dev, > + DAVINCI_I2C_PM_TIMEOUT); > + pm_runtime_use_autosuspend(dev->dev); > + > + pm_runtime_enable(dev->dev); > + > + r = pm_runtime_get_sync(dev->dev); > + if (r < 0) { > + dev_err(dev->dev, "failed to runtime_get device: %d\n", r); > + goto err_unuse_clocks; > + } > + > i2c_davinci_init(dev); > > r = devm_request_irq(&pdev->dev, dev->irq, i2c_davinci_isr, 0, > @@ -849,10 +879,16 @@ static int davinci_i2c_probe(struct platform_device > *pdev) > if (r) > goto err_unuse_clocks; > > + pm_runtime_mark_last_busy(dev->dev); > + pm_runtime_put_autosuspend(dev->dev); > + > return 0; > > err_unuse_clocks: > - clk_disable_unprepare(dev->clk); > + pm_runtime_dont_use_autosuspend(dev->dev); > + pm_runtime_put_sync(dev->dev); > + pm_runtime_disable(dev->dev); > + > dev->clk = NULL; > return r; > } > @@ -860,16 +896,26 @@ static int davinci_i2c_probe(struct platform_device > *pdev) > static int davinci_i2c_remove(struct platform_device *pdev) > { > struct davinci_i2c_dev *dev = platform_get_drvdata(pdev); > + int ret; > > i2c_davinci_cpufreq_deregister(dev); > > i2c_del_adapter(&dev->adapter); > > - clk_disable_unprepa
[PATCH v2 2/3] i2c: davinci: Add PM Runtime Support
66AK2G has I2C instances that are not apart of the ALWAYS_ON power domain like other Keystone 2 SoCs and OMAPL138. Therefore, pm_runtime is required to insure the power domain used by the specific I2C instance is properly turned on along with its functional clock. Signed-off-by: Franklin S Cooper Jr --- Version 2 changes: Move initial calls to pm runtime autosuspend before pm_runtime_enable drivers/i2c/busses/i2c-davinci.c | 62 ++-- 1 file changed, 54 insertions(+), 8 deletions(-) diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index b8c4353..6b1930d 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -36,6 +36,7 @@ #include #include #include +#include /* - global defines --- */ @@ -122,6 +123,9 @@ /* set the SDA GPIO low */ #define DAVINCI_I2C_DCLR_PDCLR1BIT(1) +/* timeout for pm runtime autosuspend */ +#define DAVINCI_I2C_PM_TIMEOUT 1000/* ms */ + struct davinci_i2c_dev { struct device *dev; void __iomem*base; @@ -541,10 +545,17 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num); + ret = pm_runtime_get_sync(dev->dev); + if (ret < 0) { + dev_err(dev->dev, "Failed to runtime_get device: %d\n", ret); + pm_runtime_put_noidle(dev->dev); + return ret; + } + ret = i2c_davinci_wait_bus_not_busy(dev); if (ret < 0) { dev_warn(dev->dev, "timeout waiting for bus ready\n"); - return ret; + goto out; } for (i = 0; i < num; i++) { @@ -552,14 +563,19 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) dev_dbg(dev->dev, "%s [%d/%d] ret: %d\n", __func__, i + 1, num, ret); if (ret < 0) - return ret; + goto out; } + ret = num; #ifdef CONFIG_CPU_FREQ complete(&dev->xfr_complete); #endif - return num; +out: + pm_runtime_mark_last_busy(dev->dev); + pm_runtime_put_autosuspend(dev->dev); + + return ret; } static u32 i2c_davinci_func(struct i2c_adapter *adap) @@ -599,6 +615,9 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) int count = 0; u16 w; + if (pm_runtime_suspended(dev->dev)) + return IRQ_NONE; + while ((stat = davinci_i2c_read_reg(dev, DAVINCI_I2C_IVR_REG))) { dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat); if (count++ == 100) { @@ -802,7 +821,6 @@ static int davinci_i2c_probe(struct platform_device *pdev) dev->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(dev->clk)) return PTR_ERR(dev->clk); - clk_prepare_enable(dev->clk); mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); dev->base = devm_ioremap_resource(&pdev->dev, mem); @@ -811,6 +829,18 @@ static int davinci_i2c_probe(struct platform_device *pdev) goto err_unuse_clocks; } + pm_runtime_set_autosuspend_delay(dev->dev, +DAVINCI_I2C_PM_TIMEOUT); + pm_runtime_use_autosuspend(dev->dev); + + pm_runtime_enable(dev->dev); + + r = pm_runtime_get_sync(dev->dev); + if (r < 0) { + dev_err(dev->dev, "failed to runtime_get device: %d\n", r); + goto err_unuse_clocks; + } + i2c_davinci_init(dev); r = devm_request_irq(&pdev->dev, dev->irq, i2c_davinci_isr, 0, @@ -849,10 +879,16 @@ static int davinci_i2c_probe(struct platform_device *pdev) if (r) goto err_unuse_clocks; + pm_runtime_mark_last_busy(dev->dev); + pm_runtime_put_autosuspend(dev->dev); + return 0; err_unuse_clocks: - clk_disable_unprepare(dev->clk); + pm_runtime_dont_use_autosuspend(dev->dev); + pm_runtime_put_sync(dev->dev); + pm_runtime_disable(dev->dev); + dev->clk = NULL; return r; } @@ -860,16 +896,26 @@ static int davinci_i2c_probe(struct platform_device *pdev) static int davinci_i2c_remove(struct platform_device *pdev) { struct davinci_i2c_dev *dev = platform_get_drvdata(pdev); + int ret; i2c_davinci_cpufreq_deregister(dev); i2c_del_adapter(&dev->adapter); - clk_disable_unprepare(dev->clk); + ret = pm_runtime_get_sync(&pdev->dev); + if (ret < 0) { + pm_runtime_put_noidle(&pdev->dev); + return ret; + } + dev->clk = NULL; davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0); + pm_runtime_dont_use_autosuspend(dev->dev); + pm_runtime_put_sync(dev->dev); + pm_runtime_disable(dev