Re: [PATCH v4 3/4] ARM: dts: add main Thermal info to rk3288
Hi Caesar, Am Mittwoch, 10. September 2014, 10:49:05 schrieb Caesar Wang: > Hi Heiko, > > 在 2014年09月09日 19:37, Heiko Stübner 写道: > > Am Mittwoch, 3. September 2014, 10:10:38 schrieb Caesar Wang: > >> Signed-off-by: Caesar Wang > >> --- > >> > >> arch/arm/boot/dts/rk3288.dtsi | 18 ++ > >> 1 file changed, 18 insertions(+) > >> > >> diff --git a/arch/arm/boot/dts/rk3288.dtsi > >> b/arch/arm/boot/dts/rk3288.dtsi > >> index 36be7bb..3d672e3 100644 > >> --- a/arch/arm/boot/dts/rk3288.dtsi > >> +++ b/arch/arm/boot/dts/rk3288.dtsi [...] > >> @@ -611,5 +622,12 @@ > >> > >>rockchip,pins = <5 15 3 _pull_none>; > >> > >>}; > >> > >>}; > >> > >> + > >> + tsadc { > >> + tsadc_int: tsadc-int { > >> + rockchip,pins = <0 10 RK_FUNC_1 _pull_up>; > >> + }; > >> + }; > > > > After looking this up in the schematics I see that this is the > > overtemperature-protection output pin ... labeled OTP_OUT. > > So I'd think the pinconfig should reflect this pin-name, especially as > > tsadc-int suggests, that this would be an interrupt leading into the > > tsadc, while in fact it is an output to a separate circuit. > > Maybe,I guess your mean as the follows . > Please correct it and Laugh out if I got it wrong. I'll never laugh ... just try get the best solution / trying to understand backgrounds. > > tsadc { > otp_out: otp-out { > rockchip,pins = <0 10 RK_FUNC_GPIO _pull_none>; > }; > > tsadc_int: tsadc-int { > rockchip,pins = <0 10 RK_FUNC_1 _pull_none>; > }; > }; > Then,I deal with the otp_out in thermal driver. > I believe The "otp_out" will restart board if it's a high active. > > tsadc_int: tsadc-int { > + rockchip,pins = <0 10 RK_FUNC_1 _pull_up>; > + }; > > But,I think the about will be implemented in thermal driver. I only meant the pin name (tsadc-int -> otp-out). In the schmatics the pin (controlled by the tsadc) is labeled otp_out and leads to the overtemperature protection circuit as expected. And as it's controlled by the tsadc, it should of course stay as the desired func_1. Heiko -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v4 3/4] ARM: dts: add main Thermal info to rk3288
Hi Caesar, Am Mittwoch, 10. September 2014, 10:49:05 schrieb Caesar Wang: Hi Heiko, 在 2014年09月09日 19:37, Heiko Stübner 写道: Am Mittwoch, 3. September 2014, 10:10:38 schrieb Caesar Wang: Signed-off-by: Caesar Wang caesar.w...@rock-chips.com --- arch/arm/boot/dts/rk3288.dtsi | 18 ++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 36be7bb..3d672e3 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi [...] @@ -611,5 +622,12 @@ rockchip,pins = 5 15 3 pcfg_pull_none; }; }; + + tsadc { + tsadc_int: tsadc-int { + rockchip,pins = 0 10 RK_FUNC_1 pcfg_pull_up; + }; + }; After looking this up in the schematics I see that this is the overtemperature-protection output pin ... labeled OTP_OUT. So I'd think the pinconfig should reflect this pin-name, especially as tsadc-int suggests, that this would be an interrupt leading into the tsadc, while in fact it is an output to a separate circuit. Maybe,I guess your mean as the follows . Please correct it and Laugh out if I got it wrong. I'll never laugh ... just try get the best solution / trying to understand backgrounds. tsadc { otp_out: otp-out { rockchip,pins = 0 10 RK_FUNC_GPIO pcfg_pull_none; }; tsadc_int: tsadc-int { rockchip,pins = 0 10 RK_FUNC_1 pcfg_pull_none; }; }; Then,I deal with the otp_out in thermal driver. I believe The otp_out will restart board if it's a high active. tsadc_int: tsadc-int { + rockchip,pins = 0 10 RK_FUNC_1 pcfg_pull_up; + }; But,I think the about will be implemented in thermal driver. I only meant the pin name (tsadc-int - otp-out). In the schmatics the pin (controlled by the tsadc) is labeled otp_out and leads to the overtemperature protection circuit as expected. And as it's controlled by the tsadc, it should of course stay as the desired func_1. Heiko -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v4 3/4] ARM: dts: add main Thermal info to rk3288
Hi Heiko, 在 2014年09月09日 19:37, Heiko Stübner 写道: Am Mittwoch, 3. September 2014, 10:10:38 schrieb Caesar Wang: Signed-off-by: Caesar Wang --- arch/arm/boot/dts/rk3288.dtsi | 18 ++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 36be7bb..3d672e3 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -224,6 +224,17 @@ status = "disabled"; }; + tsadc: tsadc@ff28 { please keep the list of nodes sorted by register address. So when looking at my v3.18-next/dts branch, it should be after uart4: serial@ff1c and before usb_host0_ehci: usb@ff50 . oh...,I will fix it. + compatible = "rockchip,rk3288-tsadc"; + reg = <0xff28 0x100>; + interrupts = ; + clocks = < SCLK_TSADC>, < PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-1 = <_int>; + status = "disabled"; + }; + /* NOTE: ohci@ff52 doesn't actually work on hardware */ usb_hsic: usb@ff5c { @@ -611,5 +622,12 @@ rockchip,pins = <5 15 3 _pull_none>; }; }; + + tsadc { + tsadc_int: tsadc-int { + rockchip,pins = <0 10 RK_FUNC_1 _pull_up>; + }; + }; After looking this up in the schematics I see that this is the overtemperature-protection output pin ... labeled OTP_OUT. So I'd think the pinconfig should reflect this pin-name, especially as tsadc-int suggests, that this would be an interrupt leading into the tsadc, while in fact it is an output to a separate circuit. Maybe,I guess your mean as the follows . Please correct it and Laugh out if I got it wrong. tsadc { otp_out: otp-out { rockchip,pins = <0 10 RK_FUNC_GPIO _pull_none>; }; tsadc_int: tsadc-int { rockchip,pins = <0 10 RK_FUNC_1 _pull_none>; }; }; Then,I deal with the otp_out in thermal driver. I believe The "otp_out" will restart board if it's a high active. tsadc_int: tsadc-int { + rockchip,pins = <0 10 RK_FUNC_1 _pull_up>; + }; But,I think the about will be implemented in thermal driver. Heiko -- Best regards, Caesar -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v4 3/4] ARM: dts: add main Thermal info to rk3288
Am Mittwoch, 3. September 2014, 10:10:38 schrieb Caesar Wang: > Signed-off-by: Caesar Wang > --- > arch/arm/boot/dts/rk3288.dtsi | 18 ++ > 1 file changed, 18 insertions(+) > > diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi > index 36be7bb..3d672e3 100644 > --- a/arch/arm/boot/dts/rk3288.dtsi > +++ b/arch/arm/boot/dts/rk3288.dtsi > @@ -224,6 +224,17 @@ > status = "disabled"; > }; > > + tsadc: tsadc@ff28 { please keep the list of nodes sorted by register address. So when looking at my v3.18-next/dts branch, it should be after uart4: serial@ff1c and before usb_host0_ehci: usb@ff50 . > + compatible = "rockchip,rk3288-tsadc"; > + reg = <0xff28 0x100>; > + interrupts = ; > + clocks = < SCLK_TSADC>, < PCLK_TSADC>; > + clock-names = "tsadc", "apb_pclk"; > + pinctrl-names = "default"; > + pinctrl-1 = <_int>; > + status = "disabled"; > + }; > + > /* NOTE: ohci@ff52 doesn't actually work on hardware */ > > usb_hsic: usb@ff5c { > @@ -611,5 +622,12 @@ > rockchip,pins = <5 15 3 _pull_none>; > }; > }; > + > + tsadc { > + tsadc_int: tsadc-int { > + rockchip,pins = <0 10 RK_FUNC_1 _pull_up>; > + }; > + }; After looking this up in the schematics I see that this is the overtemperature-protection output pin ... labeled OTP_OUT. So I'd think the pinconfig should reflect this pin-name, especially as tsadc-int suggests, that this would be an interrupt leading into the tsadc, while in fact it is an output to a separate circuit. Heiko -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v4 3/4] ARM: dts: add main Thermal info to rk3288
Am Mittwoch, 3. September 2014, 10:10:38 schrieb Caesar Wang: Signed-off-by: Caesar Wang caesar.w...@rock-chips.com --- arch/arm/boot/dts/rk3288.dtsi | 18 ++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 36be7bb..3d672e3 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -224,6 +224,17 @@ status = disabled; }; + tsadc: tsadc@ff28 { please keep the list of nodes sorted by register address. So when looking at my v3.18-next/dts branch, it should be after uart4: serial@ff1c and before usb_host0_ehci: usb@ff50 . + compatible = rockchip,rk3288-tsadc; + reg = 0xff28 0x100; + interrupts = GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH; + clocks = cru SCLK_TSADC, cru PCLK_TSADC; + clock-names = tsadc, apb_pclk; + pinctrl-names = default; + pinctrl-1 = tsadc_int; + status = disabled; + }; + /* NOTE: ohci@ff52 doesn't actually work on hardware */ usb_hsic: usb@ff5c { @@ -611,5 +622,12 @@ rockchip,pins = 5 15 3 pcfg_pull_none; }; }; + + tsadc { + tsadc_int: tsadc-int { + rockchip,pins = 0 10 RK_FUNC_1 pcfg_pull_up; + }; + }; After looking this up in the schematics I see that this is the overtemperature-protection output pin ... labeled OTP_OUT. So I'd think the pinconfig should reflect this pin-name, especially as tsadc-int suggests, that this would be an interrupt leading into the tsadc, while in fact it is an output to a separate circuit. Heiko -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v4 3/4] ARM: dts: add main Thermal info to rk3288
Hi Heiko, 在 2014年09月09日 19:37, Heiko Stübner 写道: Am Mittwoch, 3. September 2014, 10:10:38 schrieb Caesar Wang: Signed-off-by: Caesar Wang caesar.w...@rock-chips.com --- arch/arm/boot/dts/rk3288.dtsi | 18 ++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 36be7bb..3d672e3 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -224,6 +224,17 @@ status = disabled; }; + tsadc: tsadc@ff28 { please keep the list of nodes sorted by register address. So when looking at my v3.18-next/dts branch, it should be after uart4: serial@ff1c and before usb_host0_ehci: usb@ff50 . oh...,I will fix it. + compatible = rockchip,rk3288-tsadc; + reg = 0xff28 0x100; + interrupts = GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH; + clocks = cru SCLK_TSADC, cru PCLK_TSADC; + clock-names = tsadc, apb_pclk; + pinctrl-names = default; + pinctrl-1 = tsadc_int; + status = disabled; + }; + /* NOTE: ohci@ff52 doesn't actually work on hardware */ usb_hsic: usb@ff5c { @@ -611,5 +622,12 @@ rockchip,pins = 5 15 3 pcfg_pull_none; }; }; + + tsadc { + tsadc_int: tsadc-int { + rockchip,pins = 0 10 RK_FUNC_1 pcfg_pull_up; + }; + }; After looking this up in the schematics I see that this is the overtemperature-protection output pin ... labeled OTP_OUT. So I'd think the pinconfig should reflect this pin-name, especially as tsadc-int suggests, that this would be an interrupt leading into the tsadc, while in fact it is an output to a separate circuit. Maybe,I guess your mean as the follows . Please correct it and Laugh out if I got it wrong. tsadc { otp_out: otp-out { rockchip,pins = 0 10 RK_FUNC_GPIO pcfg_pull_none; }; tsadc_int: tsadc-int { rockchip,pins = 0 10 RK_FUNC_1 pcfg_pull_none; }; }; Then,I deal with the otp_out in thermal driver. I believe The otp_out will restart board if it's a high active. tsadc_int: tsadc-int { + rockchip,pins = 0 10 RK_FUNC_1 pcfg_pull_up; + }; But,I think the about will be implemented in thermal driver. Heiko -- Best regards, Caesar -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[PATCH v4 3/4] ARM: dts: add main Thermal info to rk3288
Signed-off-by: Caesar Wang --- arch/arm/boot/dts/rk3288.dtsi | 18 ++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 36be7bb..3d672e3 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -224,6 +224,17 @@ status = "disabled"; }; + tsadc: tsadc@ff28 { + compatible = "rockchip,rk3288-tsadc"; + reg = <0xff28 0x100>; + interrupts = ; + clocks = < SCLK_TSADC>, < PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-1 = <_int>; + status = "disabled"; + }; + /* NOTE: ohci@ff52 doesn't actually work on hardware */ usb_hsic: usb@ff5c { @@ -611,5 +622,12 @@ rockchip,pins = <5 15 3 _pull_none>; }; }; + + tsadc { + tsadc_int: tsadc-int { + rockchip,pins = <0 10 RK_FUNC_1 _pull_up>; + }; + }; + }; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[PATCH v4 3/4] ARM: dts: add main Thermal info to rk3288
Signed-off-by: Caesar Wang caesar.w...@rock-chips.com --- arch/arm/boot/dts/rk3288.dtsi | 18 ++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 36be7bb..3d672e3 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -224,6 +224,17 @@ status = disabled; }; + tsadc: tsadc@ff28 { + compatible = rockchip,rk3288-tsadc; + reg = 0xff28 0x100; + interrupts = GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH; + clocks = cru SCLK_TSADC, cru PCLK_TSADC; + clock-names = tsadc, apb_pclk; + pinctrl-names = default; + pinctrl-1 = tsadc_int; + status = disabled; + }; + /* NOTE: ohci@ff52 doesn't actually work on hardware */ usb_hsic: usb@ff5c { @@ -611,5 +622,12 @@ rockchip,pins = 5 15 3 pcfg_pull_none; }; }; + + tsadc { + tsadc_int: tsadc-int { + rockchip,pins = 0 10 RK_FUNC_1 pcfg_pull_up; + }; + }; + }; }; -- 1.9.1 -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/