Re: [PATCH v6 7/7] arm64: dts: sdm845: Add tsens nodes
On Thu, Jul 12, 2018 at 3:30 AM Doug Anderson wrote: > > Hi Matthias, > > On Wed, Jul 11, 2018 at 2:51 PM, Matthias Kaehlcke wrote: > > On Wed, Jul 11, 2018 at 11:44:13AM -0700, Doug Anderson wrote: > >> Hi, > >> > >> On Mon, Jul 9, 2018 at 4:43 AM, Amit Kucheria > >> wrote: > >> > SDM845 has two tsens blocks, one with 13 sensors and the other with 8 > >> > sensors. It uses version 2 of the TSENS IP, so use the fallback property > >> > to > >> > allow more common code. > >> > > >> > Signed-off-by: Amit Kucheria > >> > --- > >> > arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 > >> > 1 file changed, 16 insertions(+) > >> > > >> > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi > >> > b/arch/arm64/boot/dts/qcom/sdm845.dtsi > >> > index cdaabeb..ba2899c 100644 > >> > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > >> > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > >> > @@ -221,6 +221,22 @@ > >> > #interrupt-cells = <2>; > >> > }; > >> > > >> > + tsens0: tsens@c263000 { > >> > >> As per my comments in the bindings, nit that this should probably be > >> "thermal-sensor" not "tsens", AKA: > >> > >> tsens0: thermal-sensor@c263000 { Fixed. > >> > + compatible = "qcom,sdm845-tsens", > >> > "qcom,tsens-v2"; > >> > + reg = <0xc263000 0x1ff>, /* TM */ > >> > + <0xc222000 0x1ff>; /* SROT */ > >> > + #qcom,sensors = <13>; > >> > >> As per my comment in the bindings and the code, I'm confused about the > >> whole "#qcom,sensors" bit. It's not documented and doesn't seem > >> hooked up in the code either. > >> > >> ...but if people have tested this, perhaps I'm confused. How can > >> things work if num_sensors is 0??? > > > > The mystery is resolved by: > > > > commit 6d7c70d1cd6526dc79e3d3b3faae1c40c1681168 > > Author: Bjorn Andersson > > Date: Mon May 7 16:53:39 2018 -0700 > > > > thermal: qcom: tsens: Allow number of sensors to come from DT > > > > For platforms that has multiple copies of the TSENS hardware block it's > > necessary to be able to specify the number of sensors per block in > > DeviceTree. > > > > Signed-off-by: Bjorn Andersson > > Reviewed-by: Amit Kucheria > > Reviewed-by: Rob Herring > > Signed-off-by: Eduardo Valentin > > > > > > I bumped into this during testing ;-) I think this was merged in 4.17, so you didn't see it in your tree :-) > Ah, now it makes sense to me! Serves me right for assuming it would > be in the same series and not checking if it was something that had > already landed. Thanks. Please ignore the parts of my comments > related to the "#qcom,sensors" property. I guess Rob must have > thought that the "#" in the name was fine and he's the one in charge > not me. Thanks for your review, Doug. I'll test this and post a v7 today. I'd really like to get this accepted for 4.19 so I can post interrupt support and some more cleanups. Regards, Amit
Re: [PATCH v6 7/7] arm64: dts: sdm845: Add tsens nodes
Hi Matthias, On Wed, Jul 11, 2018 at 2:51 PM, Matthias Kaehlcke wrote: > On Wed, Jul 11, 2018 at 11:44:13AM -0700, Doug Anderson wrote: >> Hi, >> >> On Mon, Jul 9, 2018 at 4:43 AM, Amit Kucheria >> wrote: >> > SDM845 has two tsens blocks, one with 13 sensors and the other with 8 >> > sensors. It uses version 2 of the TSENS IP, so use the fallback property to >> > allow more common code. >> > >> > Signed-off-by: Amit Kucheria >> > --- >> > arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 >> > 1 file changed, 16 insertions(+) >> > >> > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi >> > b/arch/arm64/boot/dts/qcom/sdm845.dtsi >> > index cdaabeb..ba2899c 100644 >> > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi >> > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi >> > @@ -221,6 +221,22 @@ >> > #interrupt-cells = <2>; >> > }; >> > >> > + tsens0: tsens@c263000 { >> >> As per my comments in the bindings, nit that this should probably be >> "thermal-sensor" not "tsens", AKA: >> >> tsens0: thermal-sensor@c263000 { >> >> > + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; >> > + reg = <0xc263000 0x1ff>, /* TM */ >> > + <0xc222000 0x1ff>; /* SROT */ >> > + #qcom,sensors = <13>; >> >> As per my comment in the bindings and the code, I'm confused about the >> whole "#qcom,sensors" bit. It's not documented and doesn't seem >> hooked up in the code either. >> >> ...but if people have tested this, perhaps I'm confused. How can >> things work if num_sensors is 0??? > > The mystery is resolved by: > > commit 6d7c70d1cd6526dc79e3d3b3faae1c40c1681168 > Author: Bjorn Andersson > Date: Mon May 7 16:53:39 2018 -0700 > > thermal: qcom: tsens: Allow number of sensors to come from DT > > For platforms that has multiple copies of the TSENS hardware block it's > necessary to be able to specify the number of sensors per block in > DeviceTree. > > Signed-off-by: Bjorn Andersson > Reviewed-by: Amit Kucheria > Reviewed-by: Rob Herring > Signed-off-by: Eduardo Valentin > > > I bumped into this during testing ;-) Ah, now it makes sense to me! Serves me right for assuming it would be in the same series and not checking if it was something that had already landed. Thanks. Please ignore the parts of my comments related to the "#qcom,sensors" property. I guess Rob must have thought that the "#" in the name was fine and he's the one in charge not me. -Doug
Re: [PATCH v6 7/7] arm64: dts: sdm845: Add tsens nodes
On Wed, Jul 11, 2018 at 11:44:13AM -0700, Doug Anderson wrote: > Hi, > > On Mon, Jul 9, 2018 at 4:43 AM, Amit Kucheria > wrote: > > SDM845 has two tsens blocks, one with 13 sensors and the other with 8 > > sensors. It uses version 2 of the TSENS IP, so use the fallback property to > > allow more common code. > > > > Signed-off-by: Amit Kucheria > > --- > > arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 > > 1 file changed, 16 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi > > b/arch/arm64/boot/dts/qcom/sdm845.dtsi > > index cdaabeb..ba2899c 100644 > > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > > @@ -221,6 +221,22 @@ > > #interrupt-cells = <2>; > > }; > > > > + tsens0: tsens@c263000 { > > As per my comments in the bindings, nit that this should probably be > "thermal-sensor" not "tsens", AKA: > > tsens0: thermal-sensor@c263000 { > > > + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; > > + reg = <0xc263000 0x1ff>, /* TM */ > > + <0xc222000 0x1ff>; /* SROT */ > > + #qcom,sensors = <13>; > > As per my comment in the bindings and the code, I'm confused about the > whole "#qcom,sensors" bit. It's not documented and doesn't seem > hooked up in the code either. > > ...but if people have tested this, perhaps I'm confused. How can > things work if num_sensors is 0??? The mystery is resolved by: commit 6d7c70d1cd6526dc79e3d3b3faae1c40c1681168 Author: Bjorn Andersson Date: Mon May 7 16:53:39 2018 -0700 thermal: qcom: tsens: Allow number of sensors to come from DT For platforms that has multiple copies of the TSENS hardware block it's necessary to be able to specify the number of sensors per block in DeviceTree. Signed-off-by: Bjorn Andersson Reviewed-by: Amit Kucheria Reviewed-by: Rob Herring Signed-off-by: Eduardo Valentin I bumped into this during testing ;-)
Re: [PATCH v6 7/7] arm64: dts: sdm845: Add tsens nodes
Hi, On Mon, Jul 9, 2018 at 4:43 AM, Amit Kucheria wrote: > SDM845 has two tsens blocks, one with 13 sensors and the other with 8 > sensors. It uses version 2 of the TSENS IP, so use the fallback property to > allow more common code. > > Signed-off-by: Amit Kucheria > --- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi > b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index cdaabeb..ba2899c 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -221,6 +221,22 @@ > #interrupt-cells = <2>; > }; > > + tsens0: tsens@c263000 { As per my comments in the bindings, nit that this should probably be "thermal-sensor" not "tsens", AKA: tsens0: thermal-sensor@c263000 { > + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; > + reg = <0xc263000 0x1ff>, /* TM */ > + <0xc222000 0x1ff>; /* SROT */ > + #qcom,sensors = <13>; As per my comment in the bindings and the code, I'm confused about the whole "#qcom,sensors" bit. It's not documented and doesn't seem hooked up in the code either. ...but if people have tested this, perhaps I'm confused. How can things work if num_sensors is 0??? -Doug
Re: [PATCH v6 7/7] arm64: dts: sdm845: Add tsens nodes
On Mon 09 Jul 04:43 PDT 2018, Amit Kucheria wrote: > SDM845 has two tsens blocks, one with 13 sensors and the other with 8 > sensors. It uses version 2 of the TSENS IP, so use the fallback property to > allow more common code. > > Signed-off-by: Amit Kucheria Reviewed-by: Bjorn Andersson Regards, Bjorn > --- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi > b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index cdaabeb..ba2899c 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -221,6 +221,22 @@ > #interrupt-cells = <2>; > }; > > + tsens0: tsens@c263000 { > + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; > + reg = <0xc263000 0x1ff>, /* TM */ > + <0xc222000 0x1ff>; /* SROT */ > + #qcom,sensors = <13>; > + #thermal-sensor-cells = <1>; > + }; > + > + tsens1: tsens@c265000 { > + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; > + reg = <0xc265000 0x1ff>, /* TM */ > + <0xc223000 0x1ff>; /* SROT */ > + #qcom,sensors = <8>; > + #thermal-sensor-cells = <1>; > + }; > + > spmi_bus: spmi@c44 { > compatible = "qcom,spmi-pmic-arb"; > reg = <0xc44 0x1100>, > -- > 2.7.4 >
[PATCH v6 7/7] arm64: dts: sdm845: Add tsens nodes
SDM845 has two tsens blocks, one with 13 sensors and the other with 8 sensors. It uses version 2 of the TSENS IP, so use the fallback property to allow more common code. Signed-off-by: Amit Kucheria --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index cdaabeb..ba2899c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -221,6 +221,22 @@ #interrupt-cells = <2>; }; + tsens0: tsens@c263000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc263000 0x1ff>, /* TM */ + <0xc222000 0x1ff>; /* SROT */ + #qcom,sensors = <13>; + #thermal-sensor-cells = <1>; + }; + + tsens1: tsens@c265000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc265000 0x1ff>, /* TM */ + <0xc223000 0x1ff>; /* SROT */ + #qcom,sensors = <8>; + #thermal-sensor-cells = <1>; + }; + spmi_bus: spmi@c44 { compatible = "qcom,spmi-pmic-arb"; reg = <0xc44 0x1100>, -- 2.7.4