Re: [RFC] net: phy: read link status twice when phy_check_link_status()
On 2019/7/31 13:44, Heiner Kallweit wrote: > On 31.07.2019 05:33, liuyonglong wrote: >> >> >> On 2019/7/31 3:04, Heiner Kallweit wrote: >>> On 30.07.2019 08:35, liuyonglong wrote: :/sys/kernel/debug/tracing$ cat trace # tracer: nop # # entries-in-buffer/entries-written: 45/45 #P:128 # # _-=> irqs-off # / _=> need-resched #| / _---=> hardirq/softirq #|| / _--=> preempt-depth #||| / delay # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | kworker/64:2-1028 [064] 172.295687: mdio_access: mii-:bd:00.0 read phy:0x01 reg:0x02 val:0x001c kworker/64:2-1028 [064] 172.295726: mdio_access: mii-:bd:00.0 read phy:0x01 reg:0x03 val:0xc916 kworker/64:2-1028 [064] 172.296902: mdio_access: mii-:bd:00.0 read phy:0x01 reg:0x01 val:0x79ad kworker/64:2-1028 [064] 172.296938: mdio_access: mii-:bd:00.0 read phy:0x01 reg:0x0f val:0x2000 kworker/64:2-1028 [064] 172.321213: mdio_access: mii-:bd:00.0 read phy:0x01 reg:0x00 val:0x1040 kworker/64:2-1028 [064] 172.343209: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x02 val:0x001c kworker/64:2-1028 [064] 172.343245: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x03 val:0xc916 kworker/64:2-1028 [064] 172.343882: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x01 val:0x79ad kworker/64:2-1028 [064] 172.343918: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x0f val:0x2000 kworker/64:2-1028 [064] 172.362658: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x00 val:0x1040 kworker/64:2-1028 [064] 172.385961: mdio_access: mii-:bd:00.2 read phy:0x05 reg:0x02 val:0x001c kworker/64:2-1028 [064] 172.385996: mdio_access: mii-:bd:00.2 read phy:0x05 reg:0x03 val:0xc916 kworker/64:2-1028 [064] 172.386646: mdio_access: mii-:bd:00.2 read phy:0x05 reg:0x01 val:0x79ad kworker/64:2-1028 [064] 172.386681: mdio_access: mii-:bd:00.2 read phy:0x05 reg:0x0f val:0x2000 kworker/64:2-1028 [064] 172.411286: mdio_access: mii-:bd:00.2 read phy:0x05 reg:0x00 val:0x1040 kworker/64:2-1028 [064] 172.433225: mdio_access: mii-:bd:00.3 read phy:0x07 reg:0x02 val:0x001c kworker/64:2-1028 [064] 172.433260: mdio_access: mii-:bd:00.3 read phy:0x07 reg:0x03 val:0xc916 kworker/64:2-1028 [064] 172.433887: mdio_access: mii-:bd:00.3 read phy:0x07 reg:0x01 val:0x79ad kworker/64:2-1028 [064] 172.433922: mdio_access: mii-:bd:00.3 read phy:0x07 reg:0x0f val:0x2000 kworker/64:2-1028 [064] 172.452862: mdio_access: mii-:bd:00.3 read phy:0x07 reg:0x00 val:0x1040 ifconfig-1324 [011] 177.325585: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x00 val:0x1040 kworker/u257:0-8 [012] 177.325642: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x04 val:0x01e1 kworker/u257:0-8 [012] 177.325654: mdio_access: mii-:bd:00.1 write phy:0x03 reg:0x04 val:0x05e1 kworker/u257:0-8 [012] 177.325708: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x01 val:0x79ad kworker/u257:0-8 [012] 177.325744: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x09 val:0x0200 kworker/u257:0-8 [012] 177.325779: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x00 val:0x1040 kworker/u257:0-8 [012] 177.325788: mdio_access: mii-:bd:00.1 write phy:0x03 reg:0x00 val:0x1240 kworker/u257:0-8 [012] 177.325843: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x01 val:0x798d >>> >>> What I think that happens here: >>> Writing 0x1240 to BMCR starts aneg. When reading BMSR immediately after >>> that then the PHY seems to have cleared >>> the "aneg complete" bit already, but not yet the "link up" bit. This >>> results in the false "link up" notification. >>> The following patch is based on the fact that in case of enabled aneg we >>> can't have a valid link if aneg isn't >>> finished. Could you please test whether this works for you? >>> >>> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c >>> index 6b5cb87f3..7ddd91df9 100644 >>> --- a/drivers/net/phy/phy_device.c >>> +++ b/drivers/net/phy/phy_device.c >>> @@ -1774,6 +1774,12 @@ int genphy_update_link(struct phy_device *phydev) >>> phydev->link = status & BMSR_LSTATUS ? 1 : 0; >>>
Re: [RFC] net: phy: read link status twice when phy_check_link_status()
On 31.07.2019 05:33, liuyonglong wrote: > > > On 2019/7/31 3:04, Heiner Kallweit wrote: >> On 30.07.2019 08:35, liuyonglong wrote: >>> :/sys/kernel/debug/tracing$ cat trace >>> # tracer: nop >>> # >>> # entries-in-buffer/entries-written: 45/45 #P:128 >>> # >>> # _-=> irqs-off >>> # / _=> need-resched >>> #| / _---=> hardirq/softirq >>> #|| / _--=> preempt-depth >>> #||| / delay >>> # TASK-PID CPU# TIMESTAMP FUNCTION >>> # | | | | | >>> kworker/64:2-1028 [064] 172.295687: mdio_access: >>> mii-:bd:00.0 read phy:0x01 reg:0x02 val:0x001c >>> kworker/64:2-1028 [064] 172.295726: mdio_access: >>> mii-:bd:00.0 read phy:0x01 reg:0x03 val:0xc916 >>> kworker/64:2-1028 [064] 172.296902: mdio_access: >>> mii-:bd:00.0 read phy:0x01 reg:0x01 val:0x79ad >>> kworker/64:2-1028 [064] 172.296938: mdio_access: >>> mii-:bd:00.0 read phy:0x01 reg:0x0f val:0x2000 >>> kworker/64:2-1028 [064] 172.321213: mdio_access: >>> mii-:bd:00.0 read phy:0x01 reg:0x00 val:0x1040 >>> kworker/64:2-1028 [064] 172.343209: mdio_access: >>> mii-:bd:00.1 read phy:0x03 reg:0x02 val:0x001c >>> kworker/64:2-1028 [064] 172.343245: mdio_access: >>> mii-:bd:00.1 read phy:0x03 reg:0x03 val:0xc916 >>> kworker/64:2-1028 [064] 172.343882: mdio_access: >>> mii-:bd:00.1 read phy:0x03 reg:0x01 val:0x79ad >>> kworker/64:2-1028 [064] 172.343918: mdio_access: >>> mii-:bd:00.1 read phy:0x03 reg:0x0f val:0x2000 >>> kworker/64:2-1028 [064] 172.362658: mdio_access: >>> mii-:bd:00.1 read phy:0x03 reg:0x00 val:0x1040 >>> kworker/64:2-1028 [064] 172.385961: mdio_access: >>> mii-:bd:00.2 read phy:0x05 reg:0x02 val:0x001c >>> kworker/64:2-1028 [064] 172.385996: mdio_access: >>> mii-:bd:00.2 read phy:0x05 reg:0x03 val:0xc916 >>> kworker/64:2-1028 [064] 172.386646: mdio_access: >>> mii-:bd:00.2 read phy:0x05 reg:0x01 val:0x79ad >>> kworker/64:2-1028 [064] 172.386681: mdio_access: >>> mii-:bd:00.2 read phy:0x05 reg:0x0f val:0x2000 >>> kworker/64:2-1028 [064] 172.411286: mdio_access: >>> mii-:bd:00.2 read phy:0x05 reg:0x00 val:0x1040 >>> kworker/64:2-1028 [064] 172.433225: mdio_access: >>> mii-:bd:00.3 read phy:0x07 reg:0x02 val:0x001c >>> kworker/64:2-1028 [064] 172.433260: mdio_access: >>> mii-:bd:00.3 read phy:0x07 reg:0x03 val:0xc916 >>> kworker/64:2-1028 [064] 172.433887: mdio_access: >>> mii-:bd:00.3 read phy:0x07 reg:0x01 val:0x79ad >>> kworker/64:2-1028 [064] 172.433922: mdio_access: >>> mii-:bd:00.3 read phy:0x07 reg:0x0f val:0x2000 >>> kworker/64:2-1028 [064] 172.452862: mdio_access: >>> mii-:bd:00.3 read phy:0x07 reg:0x00 val:0x1040 >>> ifconfig-1324 [011] 177.325585: mdio_access: >>> mii-:bd:00.1 read phy:0x03 reg:0x00 val:0x1040 >>> kworker/u257:0-8 [012] 177.325642: mdio_access: >>> mii-:bd:00.1 read phy:0x03 reg:0x04 val:0x01e1 >>> kworker/u257:0-8 [012] 177.325654: mdio_access: >>> mii-:bd:00.1 write phy:0x03 reg:0x04 val:0x05e1 >>> kworker/u257:0-8 [012] 177.325708: mdio_access: >>> mii-:bd:00.1 read phy:0x03 reg:0x01 val:0x79ad >>> kworker/u257:0-8 [012] 177.325744: mdio_access: >>> mii-:bd:00.1 read phy:0x03 reg:0x09 val:0x0200 >>> kworker/u257:0-8 [012] 177.325779: mdio_access: >>> mii-:bd:00.1 read phy:0x03 reg:0x00 val:0x1040 >>> kworker/u257:0-8 [012] 177.325788: mdio_access: >>> mii-:bd:00.1 write phy:0x03 reg:0x00 val:0x1240 >>> kworker/u257:0-8 [012] 177.325843: mdio_access: >>> mii-:bd:00.1 read phy:0x03 reg:0x01 val:0x798d >> >> What I think that happens here: >> Writing 0x1240 to BMCR starts aneg. When reading BMSR immediately after that >> then the PHY seems to have cleared >> the "aneg complete" bit already, but not yet the "link up" bit. This results >> in the false "link up" notification. >> The following patch is based on the fact that in case of enabled aneg we >> can't have a valid link if aneg isn't >> finished. Could you please test whether this works for you? >> >> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c >> index 6b5cb87f3..7ddd91df9 100644 >> --- a/drivers/net/phy/phy_device.c >> +++ b/drivers/net/phy/phy_device.c >> @@ -1774,6 +1774,12 @@ int genphy_update_link(struct phy_device *phydev) >> phydev->link = status & BMSR_LSTATUS ? 1 : 0; >> phydev->autoneg_complete = status & BMSR_ANEGCOMPLETE ? 1 : 0; >> >> +/* Consider the case that autoneg was started and "aneg
Re: [RFC] net: phy: read link status twice when phy_check_link_status()
On 2019/7/31 3:04, Heiner Kallweit wrote: > On 30.07.2019 08:35, liuyonglong wrote: >> :/sys/kernel/debug/tracing$ cat trace >> # tracer: nop >> # >> # entries-in-buffer/entries-written: 45/45 #P:128 >> # >> # _-=> irqs-off >> # / _=> need-resched >> #| / _---=> hardirq/softirq >> #|| / _--=> preempt-depth >> #||| / delay >> # TASK-PID CPU# TIMESTAMP FUNCTION >> # | | | | | >> kworker/64:2-1028 [064] 172.295687: mdio_access: >> mii-:bd:00.0 read phy:0x01 reg:0x02 val:0x001c >> kworker/64:2-1028 [064] 172.295726: mdio_access: >> mii-:bd:00.0 read phy:0x01 reg:0x03 val:0xc916 >> kworker/64:2-1028 [064] 172.296902: mdio_access: >> mii-:bd:00.0 read phy:0x01 reg:0x01 val:0x79ad >> kworker/64:2-1028 [064] 172.296938: mdio_access: >> mii-:bd:00.0 read phy:0x01 reg:0x0f val:0x2000 >> kworker/64:2-1028 [064] 172.321213: mdio_access: >> mii-:bd:00.0 read phy:0x01 reg:0x00 val:0x1040 >> kworker/64:2-1028 [064] 172.343209: mdio_access: >> mii-:bd:00.1 read phy:0x03 reg:0x02 val:0x001c >> kworker/64:2-1028 [064] 172.343245: mdio_access: >> mii-:bd:00.1 read phy:0x03 reg:0x03 val:0xc916 >> kworker/64:2-1028 [064] 172.343882: mdio_access: >> mii-:bd:00.1 read phy:0x03 reg:0x01 val:0x79ad >> kworker/64:2-1028 [064] 172.343918: mdio_access: >> mii-:bd:00.1 read phy:0x03 reg:0x0f val:0x2000 >> kworker/64:2-1028 [064] 172.362658: mdio_access: >> mii-:bd:00.1 read phy:0x03 reg:0x00 val:0x1040 >> kworker/64:2-1028 [064] 172.385961: mdio_access: >> mii-:bd:00.2 read phy:0x05 reg:0x02 val:0x001c >> kworker/64:2-1028 [064] 172.385996: mdio_access: >> mii-:bd:00.2 read phy:0x05 reg:0x03 val:0xc916 >> kworker/64:2-1028 [064] 172.386646: mdio_access: >> mii-:bd:00.2 read phy:0x05 reg:0x01 val:0x79ad >> kworker/64:2-1028 [064] 172.386681: mdio_access: >> mii-:bd:00.2 read phy:0x05 reg:0x0f val:0x2000 >> kworker/64:2-1028 [064] 172.411286: mdio_access: >> mii-:bd:00.2 read phy:0x05 reg:0x00 val:0x1040 >> kworker/64:2-1028 [064] 172.433225: mdio_access: >> mii-:bd:00.3 read phy:0x07 reg:0x02 val:0x001c >> kworker/64:2-1028 [064] 172.433260: mdio_access: >> mii-:bd:00.3 read phy:0x07 reg:0x03 val:0xc916 >> kworker/64:2-1028 [064] 172.433887: mdio_access: >> mii-:bd:00.3 read phy:0x07 reg:0x01 val:0x79ad >> kworker/64:2-1028 [064] 172.433922: mdio_access: >> mii-:bd:00.3 read phy:0x07 reg:0x0f val:0x2000 >> kworker/64:2-1028 [064] 172.452862: mdio_access: >> mii-:bd:00.3 read phy:0x07 reg:0x00 val:0x1040 >> ifconfig-1324 [011] 177.325585: mdio_access: >> mii-:bd:00.1 read phy:0x03 reg:0x00 val:0x1040 >> kworker/u257:0-8 [012] 177.325642: mdio_access: >> mii-:bd:00.1 read phy:0x03 reg:0x04 val:0x01e1 >> kworker/u257:0-8 [012] 177.325654: mdio_access: >> mii-:bd:00.1 write phy:0x03 reg:0x04 val:0x05e1 >> kworker/u257:0-8 [012] 177.325708: mdio_access: >> mii-:bd:00.1 read phy:0x03 reg:0x01 val:0x79ad >> kworker/u257:0-8 [012] 177.325744: mdio_access: >> mii-:bd:00.1 read phy:0x03 reg:0x09 val:0x0200 >> kworker/u257:0-8 [012] 177.325779: mdio_access: >> mii-:bd:00.1 read phy:0x03 reg:0x00 val:0x1040 >> kworker/u257:0-8 [012] 177.325788: mdio_access: >> mii-:bd:00.1 write phy:0x03 reg:0x00 val:0x1240 >> kworker/u257:0-8 [012] 177.325843: mdio_access: >> mii-:bd:00.1 read phy:0x03 reg:0x01 val:0x798d > > What I think that happens here: > Writing 0x1240 to BMCR starts aneg. When reading BMSR immediately after that > then the PHY seems to have cleared > the "aneg complete" bit already, but not yet the "link up" bit. This results > in the false "link up" notification. > The following patch is based on the fact that in case of enabled aneg we > can't have a valid link if aneg isn't > finished. Could you please test whether this works for you? > > diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c > index 6b5cb87f3..7ddd91df9 100644 > --- a/drivers/net/phy/phy_device.c > +++ b/drivers/net/phy/phy_device.c > @@ -1774,6 +1774,12 @@ int genphy_update_link(struct phy_device *phydev) > phydev->link = status & BMSR_LSTATUS ? 1 : 0; > phydev->autoneg_complete = status & BMSR_ANEGCOMPLETE ? 1 : 0; > > + /* Consider the case that autoneg was started and "aneg complete" > + * bit has been reset, but "link up" bit not yet. > + */ > + if (phydev->autoneg == AUTONEG_ENABLE &&
Re: [RFC] net: phy: read link status twice when phy_check_link_status()
On 30.07.2019 08:35, liuyonglong wrote: > :/sys/kernel/debug/tracing$ cat trace > # tracer: nop > # > # entries-in-buffer/entries-written: 45/45 #P:128 > # > # _-=> irqs-off > # / _=> need-resched > #| / _---=> hardirq/softirq > #|| / _--=> preempt-depth > #||| / delay > # TASK-PID CPU# TIMESTAMP FUNCTION > # | | | | | > kworker/64:2-1028 [064] 172.295687: mdio_access: mii-:bd:00.0 > read phy:0x01 reg:0x02 val:0x001c > kworker/64:2-1028 [064] 172.295726: mdio_access: mii-:bd:00.0 > read phy:0x01 reg:0x03 val:0xc916 > kworker/64:2-1028 [064] 172.296902: mdio_access: mii-:bd:00.0 > read phy:0x01 reg:0x01 val:0x79ad > kworker/64:2-1028 [064] 172.296938: mdio_access: mii-:bd:00.0 > read phy:0x01 reg:0x0f val:0x2000 > kworker/64:2-1028 [064] 172.321213: mdio_access: mii-:bd:00.0 > read phy:0x01 reg:0x00 val:0x1040 > kworker/64:2-1028 [064] 172.343209: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x02 val:0x001c > kworker/64:2-1028 [064] 172.343245: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x03 val:0xc916 > kworker/64:2-1028 [064] 172.343882: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x01 val:0x79ad > kworker/64:2-1028 [064] 172.343918: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x0f val:0x2000 > kworker/64:2-1028 [064] 172.362658: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x00 val:0x1040 > kworker/64:2-1028 [064] 172.385961: mdio_access: mii-:bd:00.2 > read phy:0x05 reg:0x02 val:0x001c > kworker/64:2-1028 [064] 172.385996: mdio_access: mii-:bd:00.2 > read phy:0x05 reg:0x03 val:0xc916 > kworker/64:2-1028 [064] 172.386646: mdio_access: mii-:bd:00.2 > read phy:0x05 reg:0x01 val:0x79ad > kworker/64:2-1028 [064] 172.386681: mdio_access: mii-:bd:00.2 > read phy:0x05 reg:0x0f val:0x2000 > kworker/64:2-1028 [064] 172.411286: mdio_access: mii-:bd:00.2 > read phy:0x05 reg:0x00 val:0x1040 > kworker/64:2-1028 [064] 172.433225: mdio_access: mii-:bd:00.3 > read phy:0x07 reg:0x02 val:0x001c > kworker/64:2-1028 [064] 172.433260: mdio_access: mii-:bd:00.3 > read phy:0x07 reg:0x03 val:0xc916 > kworker/64:2-1028 [064] 172.433887: mdio_access: mii-:bd:00.3 > read phy:0x07 reg:0x01 val:0x79ad > kworker/64:2-1028 [064] 172.433922: mdio_access: mii-:bd:00.3 > read phy:0x07 reg:0x0f val:0x2000 > kworker/64:2-1028 [064] 172.452862: mdio_access: mii-:bd:00.3 > read phy:0x07 reg:0x00 val:0x1040 > ifconfig-1324 [011] 177.325585: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x00 val:0x1040 > kworker/u257:0-8 [012] 177.325642: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x04 val:0x01e1 > kworker/u257:0-8 [012] 177.325654: mdio_access: mii-:bd:00.1 > write phy:0x03 reg:0x04 val:0x05e1 > kworker/u257:0-8 [012] 177.325708: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x01 val:0x79ad > kworker/u257:0-8 [012] 177.325744: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x09 val:0x0200 > kworker/u257:0-8 [012] 177.325779: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x00 val:0x1040 > kworker/u257:0-8 [012] 177.325788: mdio_access: mii-:bd:00.1 > write phy:0x03 reg:0x00 val:0x1240 > kworker/u257:0-8 [012] 177.325843: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x01 val:0x798d What I think that happens here: Writing 0x1240 to BMCR starts aneg. When reading BMSR immediately after that then the PHY seems to have cleared the "aneg complete" bit already, but not yet the "link up" bit. This results in the false "link up" notification. The following patch is based on the fact that in case of enabled aneg we can't have a valid link if aneg isn't finished. Could you please test whether this works for you? diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 6b5cb87f3..7ddd91df9 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1774,6 +1774,12 @@ int genphy_update_link(struct phy_device *phydev) phydev->link = status & BMSR_LSTATUS ? 1 : 0; phydev->autoneg_complete = status & BMSR_ANEGCOMPLETE ? 1 : 0; + /* Consider the case that autoneg was started and "aneg complete" +* bit has been reset, but "link up" bit not yet. +*/ + if (phydev->autoneg == AUTONEG_ENABLE && !phydev->autoneg_complete) + phydev->link = 0; + return 0; } EXPORT_SYMBOL(genphy_update_link); -- 2.22.0 >
Re: [RFC] net: phy: read link status twice when phy_check_link_status()
On 2019/7/30 14:35, liuyonglong wrote: > :/sys/kernel/debug/tracing$ cat trace > # tracer: nop > # > # entries-in-buffer/entries-written: 45/45 #P:128 > # > # _-=> irqs-off > # / _=> need-resched > #| / _---=> hardirq/softirq > #|| / _--=> preempt-depth > #||| / delay > # TASK-PID CPU# TIMESTAMP FUNCTION > # | | | | | > kworker/64:2-1028 [064] 172.295687: mdio_access: mii-:bd:00.0 > read phy:0x01 reg:0x02 val:0x001c > kworker/64:2-1028 [064] 172.295726: mdio_access: mii-:bd:00.0 > read phy:0x01 reg:0x03 val:0xc916 > kworker/64:2-1028 [064] 172.296902: mdio_access: mii-:bd:00.0 > read phy:0x01 reg:0x01 val:0x79ad > kworker/64:2-1028 [064] 172.296938: mdio_access: mii-:bd:00.0 > read phy:0x01 reg:0x0f val:0x2000 > kworker/64:2-1028 [064] 172.321213: mdio_access: mii-:bd:00.0 > read phy:0x01 reg:0x00 val:0x1040 > kworker/64:2-1028 [064] 172.343209: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x02 val:0x001c > kworker/64:2-1028 [064] 172.343245: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x03 val:0xc916 > kworker/64:2-1028 [064] 172.343882: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x01 val:0x79ad > kworker/64:2-1028 [064] 172.343918: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x0f val:0x2000 > kworker/64:2-1028 [064] 172.362658: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x00 val:0x1040 > kworker/64:2-1028 [064] 172.385961: mdio_access: mii-:bd:00.2 > read phy:0x05 reg:0x02 val:0x001c > kworker/64:2-1028 [064] 172.385996: mdio_access: mii-:bd:00.2 > read phy:0x05 reg:0x03 val:0xc916 > kworker/64:2-1028 [064] 172.386646: mdio_access: mii-:bd:00.2 > read phy:0x05 reg:0x01 val:0x79ad > kworker/64:2-1028 [064] 172.386681: mdio_access: mii-:bd:00.2 > read phy:0x05 reg:0x0f val:0x2000 > kworker/64:2-1028 [064] 172.411286: mdio_access: mii-:bd:00.2 > read phy:0x05 reg:0x00 val:0x1040 > kworker/64:2-1028 [064] 172.433225: mdio_access: mii-:bd:00.3 > read phy:0x07 reg:0x02 val:0x001c > kworker/64:2-1028 [064] 172.433260: mdio_access: mii-:bd:00.3 > read phy:0x07 reg:0x03 val:0xc916 > kworker/64:2-1028 [064] 172.433887: mdio_access: mii-:bd:00.3 > read phy:0x07 reg:0x01 val:0x79ad > kworker/64:2-1028 [064] 172.433922: mdio_access: mii-:bd:00.3 > read phy:0x07 reg:0x0f val:0x2000 > kworker/64:2-1028 [064] 172.452862: mdio_access: mii-:bd:00.3 > read phy:0x07 reg:0x00 val:0x1040 > ifconfig-1324 [011] 177.325585: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x00 val:0x1040 > kworker/u257:0-8 [012] 177.325642: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x04 val:0x01e1 > kworker/u257:0-8 [012] 177.325654: mdio_access: mii-:bd:00.1 > write phy:0x03 reg:0x04 val:0x05e1 > kworker/u257:0-8 [012] 177.325708: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x01 val:0x79ad > kworker/u257:0-8 [012] 177.325744: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x09 val:0x0200 > kworker/u257:0-8 [012] 177.325779: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x00 val:0x1040 > kworker/u257:0-8 [012] 177.325788: mdio_access: mii-:bd:00.1 > write phy:0x03 reg:0x00 val:0x1240 > kworker/u257:0-8 [012] 177.325843: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x01 val:0x798d > kworker/u257:0-8 [003] 178.360488: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x01 val:0x7989 > kworker/u257:0-8 [000] 179.384479: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x01 val:0x7989 > kworker/u257:0-8 [000] 180.408477: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x01 val:0x7989 > kworker/u257:0-8 [000] 181.432474: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x01 val:0x79a9 > kworker/u257:0-8 [000] 181.432510: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x0a val:0x7800 > kworker/u257:0-8 [000] 181.432546: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x09 val:0x0200 > kworker/u257:0-8 [000] 181.432582: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x05 val:0xc1e1 > kworker/u257:0-8 [000] 182.456510: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x01 val:0x79ad > kworker/u257:0-8 [000] 182.456546: mdio_access: mii-:bd:00.1 > read phy:0x03 reg:0x0a val:0x4800 > kworker/u257:0-8 [000] 182.456582: mdio_access: mii-:bd:00.1 > read
Re: [RFC] net: phy: read link status twice when phy_check_link_status()
:/sys/kernel/debug/tracing$ cat trace # tracer: nop # # entries-in-buffer/entries-written: 45/45 #P:128 # # _-=> irqs-off # / _=> need-resched #| / _---=> hardirq/softirq #|| / _--=> preempt-depth #||| / delay # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | kworker/64:2-1028 [064] 172.295687: mdio_access: mii-:bd:00.0 read phy:0x01 reg:0x02 val:0x001c kworker/64:2-1028 [064] 172.295726: mdio_access: mii-:bd:00.0 read phy:0x01 reg:0x03 val:0xc916 kworker/64:2-1028 [064] 172.296902: mdio_access: mii-:bd:00.0 read phy:0x01 reg:0x01 val:0x79ad kworker/64:2-1028 [064] 172.296938: mdio_access: mii-:bd:00.0 read phy:0x01 reg:0x0f val:0x2000 kworker/64:2-1028 [064] 172.321213: mdio_access: mii-:bd:00.0 read phy:0x01 reg:0x00 val:0x1040 kworker/64:2-1028 [064] 172.343209: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x02 val:0x001c kworker/64:2-1028 [064] 172.343245: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x03 val:0xc916 kworker/64:2-1028 [064] 172.343882: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x01 val:0x79ad kworker/64:2-1028 [064] 172.343918: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x0f val:0x2000 kworker/64:2-1028 [064] 172.362658: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x00 val:0x1040 kworker/64:2-1028 [064] 172.385961: mdio_access: mii-:bd:00.2 read phy:0x05 reg:0x02 val:0x001c kworker/64:2-1028 [064] 172.385996: mdio_access: mii-:bd:00.2 read phy:0x05 reg:0x03 val:0xc916 kworker/64:2-1028 [064] 172.386646: mdio_access: mii-:bd:00.2 read phy:0x05 reg:0x01 val:0x79ad kworker/64:2-1028 [064] 172.386681: mdio_access: mii-:bd:00.2 read phy:0x05 reg:0x0f val:0x2000 kworker/64:2-1028 [064] 172.411286: mdio_access: mii-:bd:00.2 read phy:0x05 reg:0x00 val:0x1040 kworker/64:2-1028 [064] 172.433225: mdio_access: mii-:bd:00.3 read phy:0x07 reg:0x02 val:0x001c kworker/64:2-1028 [064] 172.433260: mdio_access: mii-:bd:00.3 read phy:0x07 reg:0x03 val:0xc916 kworker/64:2-1028 [064] 172.433887: mdio_access: mii-:bd:00.3 read phy:0x07 reg:0x01 val:0x79ad kworker/64:2-1028 [064] 172.433922: mdio_access: mii-:bd:00.3 read phy:0x07 reg:0x0f val:0x2000 kworker/64:2-1028 [064] 172.452862: mdio_access: mii-:bd:00.3 read phy:0x07 reg:0x00 val:0x1040 ifconfig-1324 [011] 177.325585: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x00 val:0x1040 kworker/u257:0-8 [012] 177.325642: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x04 val:0x01e1 kworker/u257:0-8 [012] 177.325654: mdio_access: mii-:bd:00.1 write phy:0x03 reg:0x04 val:0x05e1 kworker/u257:0-8 [012] 177.325708: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x01 val:0x79ad kworker/u257:0-8 [012] 177.325744: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x09 val:0x0200 kworker/u257:0-8 [012] 177.325779: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x00 val:0x1040 kworker/u257:0-8 [012] 177.325788: mdio_access: mii-:bd:00.1 write phy:0x03 reg:0x00 val:0x1240 kworker/u257:0-8 [012] 177.325843: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x01 val:0x798d kworker/u257:0-8 [003] 178.360488: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x01 val:0x7989 kworker/u257:0-8 [000] 179.384479: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x01 val:0x7989 kworker/u257:0-8 [000] 180.408477: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x01 val:0x7989 kworker/u257:0-8 [000] 181.432474: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x01 val:0x79a9 kworker/u257:0-8 [000] 181.432510: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x0a val:0x7800 kworker/u257:0-8 [000] 181.432546: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x09 val:0x0200 kworker/u257:0-8 [000] 181.432582: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x05 val:0xc1e1 kworker/u257:0-8 [000] 182.456510: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x01 val:0x79ad kworker/u257:0-8 [000] 182.456546: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x0a val:0x4800 kworker/u257:0-8 [000] 182.456582: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x09 val:0x0200 kworker/u257:0-8 [000] 182.456618: mdio_access: mii-:bd:00.1 read phy:0x03 reg:0x05 val:0xc1e1 kworker/u257:0-8 [001] 183.480476: mdio_access: mii-:bd:00.1
Re: [RFC] net: phy: read link status twice when phy_check_link_status()
On 30.07.2019 06:03, liuyonglong wrote:
>
>
> On 2019/7/30 4:57, Heiner Kallweit wrote:
>> On 29.07.2019 05:59, liuyonglong wrote:
>>>
>>>
>>> On 2019/7/27 2:14, Heiner Kallweit wrote:
On 26.07.2019 11:53, Yonglong Liu wrote:
> According to the datasheet of Marvell phy and Realtek phy, the
> copper link status should read twice, or it may get a fake link
> up status, and cause up->down->up at the first time when link up.
> This happens more oftem at Realtek phy.
>
This is not correct, there is no fake link up status.
Read the comment in genphy_update_link, only link-down events
are latched. Means if the first read returns link up, then there
is no need for a second read. And in polling mode we don't do a
second read because we want to detect also short link drops.
It would be helpful if you could describe your actual problem
and whether you use polling or interrupt mode.
>>>
>>> [ 44.498633] hns3 :bd:00.1 eth5: net open
>>> [ 44.504273] hns3 :bd:00.1: reg=0x1, data=0x79ad -> called from
>>> phy_start_aneg
>>> [ 44.532348] hns3 :bd:00.1: reg=0x1, data=0x798d -> called from
>>> phy_state_machine,update link.
>>
>> This should not happen. The PHY indicates link up w/o having aneg finished.
>>
>>>
>>> According to the datasheet:
>>> reg 1.5=0 now, means copper auto-negotiation not complete
>>> reg 1.2=1 now, means link is up
>>>
>>> We can see that, when we read the link up, the auto-negotiation
>>> is not complete yet, so the speed is invalid.
>>>
>>> I don't know why this happen, maybe this state is keep from bios?
>>> Or we may do something else in the phy initialize to fix it?
>>> And also confuse that why read twice can fix it?
>>>
>> I suppose that basically any delay would do.
>>
>>> [ 44.554063] hns3 :bd:00.1: invalid speed (-1)
>>> [ 44.560412] hns3 :bd:00.1 eth5: failed to adjust link.
>>> [ 45.194870] hns3 :bd:00.1 eth5: link up
>>> [ 45.574095] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x7989
>>> [ 46.150051] hns3 :bd:00.1 eth5: link down
>>> [ 46.598074] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x7989
>>> [ 47.622075] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x79a9
>>> [ 48.646077] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x79ad
>>> [ 48.934050] hns3 :bd:00.1 eth5: link up
>>> [ 49.702140] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x79ad
>>>
> I add a fake status read, and can solve this problem.
>
> I also see that in genphy_update_link(), had delete the fake
> read in polling mode, so I don't know whether my solution is
> correct.
>
>>
>> Can you test whether the following fixes the issue for you?
>> Also it would be interesting which exact PHY models you tested
>> and whether you built the respective PHY drivers or whether you
>> rely on the genphy driver. Best use the second patch to get the
>> needed info. It may make sense anyway to add the call to
>> phy_attached_info() to the hns3 driver.
>>
>
> [ 40.100716] RTL8211F Gigabit Ethernet mii-:bd:00.3:07: attached PHY
> driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=mii-:bd:00.3:07,
> irq=POLL)
> [ 40.932133] hns3 :bd:00.3 eth7: net open
> [ 40.932458] hns3 :bd:00.3: invalid speed (-1)
> [ 40.932541] 8021q: adding VLAN 0 to HW filter on device eth7
> [ 40.937149] hns3 :bd:00.3 eth7: failed to adjust link.
>
> [ 40.662050] Generic PHY mii-:bd:00.2:05: attached PHY driver [Generic
> PHY] (mii_bus:phy_addr=mii-:bd:00.2:05, irq=POLL)
> [ 41.563511] hns3 :bd:00.2 eth6: net open
> [ 41.563853] hns3 :bd:00.2: invalid speed (-1)
> [ 41.563943] 8021q: adding VLAN 0 to HW filter on device eth6
> [ 41.568578] IPv6: ADDRCONF(NETDEV_CHANGE): eth6: link becomes ready
> [ 41.568898] hns3 :bd:00.2 eth6: failed to adjust link.
>
> I am using RTL8211F, but you can see that, both genphy driver and
> RTL8211F driver have the same issue.
>
>>
>> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
>> index 6b5cb87f3..fbecfe210 100644
>> --- a/drivers/net/phy/phy_device.c
>> +++ b/drivers/net/phy/phy_device.c
>> @@ -1807,7 +1807,8 @@ int genphy_read_status(struct phy_device *phydev)
>>
>> linkmode_zero(phydev->lp_advertising);
>>
>> -if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
>> +if (phydev->autoneg == AUTONEG_ENABLE &&
>> +(phydev->autoneg_complete || phydev->link)) {
>> if (phydev->is_gigabit_capable) {
>> lpagb = phy_read(phydev, MII_STAT1000);
>> if (lpagb < 0)
>>
>
> I have try this patch, have no effect. I suppose that at this time,
> the autoneg actually not complete yet.
>
> Maybe the wrong phy state is passed from bios? Invalid speed just
> happen at the first time when ethX up, after that, repeat the
> ifconfig down/ifconfig up command can not see that again.
>
> So I think the bios should power off
Re: [RFC] net: phy: read link status twice when phy_check_link_status()
On 2019/7/30 4:57, Heiner Kallweit wrote:
> On 29.07.2019 05:59, liuyonglong wrote:
>>
>>
>> On 2019/7/27 2:14, Heiner Kallweit wrote:
>>> On 26.07.2019 11:53, Yonglong Liu wrote:
According to the datasheet of Marvell phy and Realtek phy, the
copper link status should read twice, or it may get a fake link
up status, and cause up->down->up at the first time when link up.
This happens more oftem at Realtek phy.
>>> This is not correct, there is no fake link up status.
>>> Read the comment in genphy_update_link, only link-down events
>>> are latched. Means if the first read returns link up, then there
>>> is no need for a second read. And in polling mode we don't do a
>>> second read because we want to detect also short link drops.
>>>
>>> It would be helpful if you could describe your actual problem
>>> and whether you use polling or interrupt mode.
>>>
>>
>> [ 44.498633] hns3 :bd:00.1 eth5: net open
>> [ 44.504273] hns3 :bd:00.1: reg=0x1, data=0x79ad -> called from
>> phy_start_aneg
>> [ 44.532348] hns3 :bd:00.1: reg=0x1, data=0x798d -> called from
>> phy_state_machine,update link.
>
> This should not happen. The PHY indicates link up w/o having aneg finished.
>
>>
>> According to the datasheet:
>> reg 1.5=0 now, means copper auto-negotiation not complete
>> reg 1.2=1 now, means link is up
>>
>> We can see that, when we read the link up, the auto-negotiation
>> is not complete yet, so the speed is invalid.
>>
>> I don't know why this happen, maybe this state is keep from bios?
>> Or we may do something else in the phy initialize to fix it?
>> And also confuse that why read twice can fix it?
>>
> I suppose that basically any delay would do.
>
>> [ 44.554063] hns3 :bd:00.1: invalid speed (-1)
>> [ 44.560412] hns3 :bd:00.1 eth5: failed to adjust link.
>> [ 45.194870] hns3 :bd:00.1 eth5: link up
>> [ 45.574095] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x7989
>> [ 46.150051] hns3 :bd:00.1 eth5: link down
>> [ 46.598074] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x7989
>> [ 47.622075] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x79a9
>> [ 48.646077] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x79ad
>> [ 48.934050] hns3 :bd:00.1 eth5: link up
>> [ 49.702140] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x79ad
>>
I add a fake status read, and can solve this problem.
I also see that in genphy_update_link(), had delete the fake
read in polling mode, so I don't know whether my solution is
correct.
>
> Can you test whether the following fixes the issue for you?
> Also it would be interesting which exact PHY models you tested
> and whether you built the respective PHY drivers or whether you
> rely on the genphy driver. Best use the second patch to get the
> needed info. It may make sense anyway to add the call to
> phy_attached_info() to the hns3 driver.
>
[ 40.100716] RTL8211F Gigabit Ethernet mii-:bd:00.3:07: attached PHY
driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=mii-:bd:00.3:07,
irq=POLL)
[ 40.932133] hns3 :bd:00.3 eth7: net open
[ 40.932458] hns3 :bd:00.3: invalid speed (-1)
[ 40.932541] 8021q: adding VLAN 0 to HW filter on device eth7
[ 40.937149] hns3 :bd:00.3 eth7: failed to adjust link.
[ 40.662050] Generic PHY mii-:bd:00.2:05: attached PHY driver [Generic
PHY] (mii_bus:phy_addr=mii-:bd:00.2:05, irq=POLL)
[ 41.563511] hns3 :bd:00.2 eth6: net open
[ 41.563853] hns3 :bd:00.2: invalid speed (-1)
[ 41.563943] 8021q: adding VLAN 0 to HW filter on device eth6
[ 41.568578] IPv6: ADDRCONF(NETDEV_CHANGE): eth6: link becomes ready
[ 41.568898] hns3 :bd:00.2 eth6: failed to adjust link.
I am using RTL8211F, but you can see that, both genphy driver and
RTL8211F driver have the same issue.
>
> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> index 6b5cb87f3..fbecfe210 100644
> --- a/drivers/net/phy/phy_device.c
> +++ b/drivers/net/phy/phy_device.c
> @@ -1807,7 +1807,8 @@ int genphy_read_status(struct phy_device *phydev)
>
> linkmode_zero(phydev->lp_advertising);
>
> - if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
> + if (phydev->autoneg == AUTONEG_ENABLE &&
> + (phydev->autoneg_complete || phydev->link)) {
> if (phydev->is_gigabit_capable) {
> lpagb = phy_read(phydev, MII_STAT1000);
> if (lpagb < 0)
>
I have try this patch, have no effect. I suppose that at this time,
the autoneg actually not complete yet.
Maybe the wrong phy state is passed from bios? Invalid speed just
happen at the first time when ethX up, after that, repeat the
ifconfig down/ifconfig up command can not see that again.
So I think the bios should power off the phy(writing reg 1.11 to 1)
before it starts the OS? Or any other way to fix this in the OS?
Re: [RFC] net: phy: read link status twice when phy_check_link_status()
On 29.07.2019 05:59, liuyonglong wrote:
>
>
> On 2019/7/27 2:14, Heiner Kallweit wrote:
>> On 26.07.2019 11:53, Yonglong Liu wrote:
>>> According to the datasheet of Marvell phy and Realtek phy, the
>>> copper link status should read twice, or it may get a fake link
>>> up status, and cause up->down->up at the first time when link up.
>>> This happens more oftem at Realtek phy.
>>>
>> This is not correct, there is no fake link up status.
>> Read the comment in genphy_update_link, only link-down events
>> are latched. Means if the first read returns link up, then there
>> is no need for a second read. And in polling mode we don't do a
>> second read because we want to detect also short link drops.
>>
>> It would be helpful if you could describe your actual problem
>> and whether you use polling or interrupt mode.
>>
>
> [ 44.498633] hns3 :bd:00.1 eth5: net open
> [ 44.504273] hns3 :bd:00.1: reg=0x1, data=0x79ad -> called from
> phy_start_aneg
> [ 44.532348] hns3 :bd:00.1: reg=0x1, data=0x798d -> called from
> phy_state_machine,update link.
This should not happen. The PHY indicates link up w/o having aneg finished.
>
> According to the datasheet:
> reg 1.5=0 now, means copper auto-negotiation not complete
> reg 1.2=1 now, means link is up
>
> We can see that, when we read the link up, the auto-negotiation
> is not complete yet, so the speed is invalid.
>
> I don't know why this happen, maybe this state is keep from bios?
> Or we may do something else in the phy initialize to fix it?
> And also confuse that why read twice can fix it?
>
I suppose that basically any delay would do.
> [ 44.554063] hns3 :bd:00.1: invalid speed (-1)
> [ 44.560412] hns3 :bd:00.1 eth5: failed to adjust link.
> [ 45.194870] hns3 :bd:00.1 eth5: link up
> [ 45.574095] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x7989
> [ 46.150051] hns3 :bd:00.1 eth5: link down
> [ 46.598074] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x7989
> [ 47.622075] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x79a9
> [ 48.646077] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x79ad
> [ 48.934050] hns3 :bd:00.1 eth5: link up
> [ 49.702140] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x79ad
>
>>> I add a fake status read, and can solve this problem.
>>>
>>> I also see that in genphy_update_link(), had delete the fake
>>> read in polling mode, so I don't know whether my solution is
>>> correct.
>>>
Can you test whether the following fixes the issue for you?
Also it would be interesting which exact PHY models you tested
and whether you built the respective PHY drivers or whether you
rely on the genphy driver. Best use the second patch to get the
needed info. It may make sense anyway to add the call to
phy_attached_info() to the hns3 driver.
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 6b5cb87f3..fbecfe210 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1807,7 +1807,8 @@ int genphy_read_status(struct phy_device *phydev)
linkmode_zero(phydev->lp_advertising);
- if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
+ if (phydev->autoneg == AUTONEG_ENABLE &&
+ (phydev->autoneg_complete || phydev->link)) {
if (phydev->is_gigabit_capable) {
lpagb = phy_read(phydev, MII_STAT1000);
if (lpagb < 0)
--
2.22.0
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index abb1b4385..dc4dfd460 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -231,6 +231,8 @@ int hclge_mac_connect_phy(struct hnae3_handle *handle)
linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
phydev->advertising);
+ phy_attached_info(phydev);
+
return 0;
}
--
2.22.0
>>> Or provide a phydev->drv->read_status functions for the phy I
>>> used is more acceptable?
>>>
>>> Signed-off-by: Yonglong Liu
>>> ---
>>> drivers/net/phy/phy.c | 8
>>> 1 file changed, 8 insertions(+)
>>>
>>> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
>>> index ef7aa73..0c03edc 100644
>>> --- a/drivers/net/phy/phy.c
>>> +++ b/drivers/net/phy/phy.c
>>> @@ -1,4 +1,7 @@
>>> // SPDX-License-Identifier: GPL-2.0+
>>> + err = phy_read_status(phydev);
>>> + if (err)
>>> + return err;
>>
>> This seems to be completely wrong at that place.
>>
>
> Sorry, this can be ignore.
>
>>> /* Framework for configuring and reading PHY devices
>>> * Based on code in sungem_phy.c and gianfar_phy.c
>>> *
>>> @@ -525,6 +528,11 @@ static int phy_check_link_status(struct phy_device
>>> *phydev)
>>>
>>> WARN_ON(!mutex_is_locked(>lock));
>>>
>>> + /* Do a fake read */
>>> + err = phy_read(phydev, MII_BMSR);
>>> + if (err < 0)
>>> + return
Re: [RFC] net: phy: read link status twice when phy_check_link_status()
On 2019/7/27 2:14, Heiner Kallweit wrote: > On 26.07.2019 11:53, Yonglong Liu wrote: >> According to the datasheet of Marvell phy and Realtek phy, the >> copper link status should read twice, or it may get a fake link >> up status, and cause up->down->up at the first time when link up. >> This happens more oftem at Realtek phy. >> > This is not correct, there is no fake link up status. > Read the comment in genphy_update_link, only link-down events > are latched. Means if the first read returns link up, then there > is no need for a second read. And in polling mode we don't do a > second read because we want to detect also short link drops. > > It would be helpful if you could describe your actual problem > and whether you use polling or interrupt mode. > [ 44.498633] hns3 :bd:00.1 eth5: net open [ 44.504273] hns3 :bd:00.1: reg=0x1, data=0x79ad -> called from phy_start_aneg [ 44.532348] hns3 :bd:00.1: reg=0x1, data=0x798d -> called from phy_state_machine,update link. According to the datasheet: reg 1.5=0 now, means copper auto-negotiation not complete reg 1.2=1 now, means link is up We can see that, when we read the link up, the auto-negotiation is not complete yet, so the speed is invalid. I don't know why this happen, maybe this state is keep from bios? Or we may do something else in the phy initialize to fix it? And also confuse that why read twice can fix it? [ 44.554063] hns3 :bd:00.1: invalid speed (-1) [ 44.560412] hns3 :bd:00.1 eth5: failed to adjust link. [ 45.194870] hns3 :bd:00.1 eth5: link up [ 45.574095] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x7989 [ 46.150051] hns3 :bd:00.1 eth5: link down [ 46.598074] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x7989 [ 47.622075] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x79a9 [ 48.646077] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x79ad [ 48.934050] hns3 :bd:00.1 eth5: link up [ 49.702140] hns3 :bd:00.1: phyid=3, reg=0x1, data=0x79ad >> I add a fake status read, and can solve this problem. >> >> I also see that in genphy_update_link(), had delete the fake >> read in polling mode, so I don't know whether my solution is >> correct. >> >> Or provide a phydev->drv->read_status functions for the phy I >> used is more acceptable? >> >> Signed-off-by: Yonglong Liu >> --- >> drivers/net/phy/phy.c | 8 >> 1 file changed, 8 insertions(+) >> >> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c >> index ef7aa73..0c03edc 100644 >> --- a/drivers/net/phy/phy.c >> +++ b/drivers/net/phy/phy.c >> @@ -1,4 +1,7 @@ >> // SPDX-License-Identifier: GPL-2.0+ >> +err = phy_read_status(phydev); >> +if (err) >> +return err; > > This seems to be completely wrong at that place. > Sorry, this can be ignore. >> /* Framework for configuring and reading PHY devices >> * Based on code in sungem_phy.c and gianfar_phy.c >> * >> @@ -525,6 +528,11 @@ static int phy_check_link_status(struct phy_device >> *phydev) >> >> WARN_ON(!mutex_is_locked(>lock)); >> >> +/* Do a fake read */ >> +err = phy_read(phydev, MII_BMSR); >> +if (err < 0) >> +return err; >> + >> err = phy_read_status(phydev); >> if (err) >> return err; >> > > > . >
Re: [RFC] net: phy: read link status twice when phy_check_link_status()
On 26.07.2019 11:53, Yonglong Liu wrote: > According to the datasheet of Marvell phy and Realtek phy, the > copper link status should read twice, or it may get a fake link > up status, and cause up->down->up at the first time when link up. > This happens more oftem at Realtek phy. > This is not correct, there is no fake link up status. Read the comment in genphy_update_link, only link-down events are latched. Means if the first read returns link up, then there is no need for a second read. And in polling mode we don't do a second read because we want to detect also short link drops. It would be helpful if you could describe your actual problem and whether you use polling or interrupt mode. > I add a fake status read, and can solve this problem. > > I also see that in genphy_update_link(), had delete the fake > read in polling mode, so I don't know whether my solution is > correct. > > Or provide a phydev->drv->read_status functions for the phy I > used is more acceptable? > > Signed-off-by: Yonglong Liu > --- > drivers/net/phy/phy.c | 8 > 1 file changed, 8 insertions(+) > > diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c > index ef7aa73..0c03edc 100644 > --- a/drivers/net/phy/phy.c > +++ b/drivers/net/phy/phy.c > @@ -1,4 +1,7 @@ > // SPDX-License-Identifier: GPL-2.0+ > + err = phy_read_status(phydev); > + if (err) > + return err; This seems to be completely wrong at that place. > /* Framework for configuring and reading PHY devices > * Based on code in sungem_phy.c and gianfar_phy.c > * > @@ -525,6 +528,11 @@ static int phy_check_link_status(struct phy_device > *phydev) > > WARN_ON(!mutex_is_locked(>lock)); > > + /* Do a fake read */ > + err = phy_read(phydev, MII_BMSR); > + if (err < 0) > + return err; > + > err = phy_read_status(phydev); > if (err) > return err; >
[RFC] net: phy: read link status twice when phy_check_link_status()
According to the datasheet of Marvell phy and Realtek phy, the copper link status should read twice, or it may get a fake link up status, and cause up->down->up at the first time when link up. This happens more oftem at Realtek phy. I add a fake status read, and can solve this problem. I also see that in genphy_update_link(), had delete the fake read in polling mode, so I don't know whether my solution is correct. Or provide a phydev->drv->read_status functions for the phy I used is more acceptable? Signed-off-by: Yonglong Liu --- drivers/net/phy/phy.c | 8 1 file changed, 8 insertions(+) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index ef7aa73..0c03edc 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -1,4 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ + err = phy_read_status(phydev); + if (err) + return err; /* Framework for configuring and reading PHY devices * Based on code in sungem_phy.c and gianfar_phy.c * @@ -525,6 +528,11 @@ static int phy_check_link_status(struct phy_device *phydev) WARN_ON(!mutex_is_locked(>lock)); + /* Do a fake read */ + err = phy_read(phydev, MII_BMSR); + if (err < 0) + return err; + err = phy_read_status(phydev); if (err) return err; -- 2.8.1
