Re: [RFC PATCH 2/6] x86/apic: Construct a framework for setuping APIC mode as soon as possible
Hi Thomas, At 04/05/2017 07:46 PM, Thomas Gleixner wrote: On Wed, 29 Mar 2017, Dou Liyang wrote: Now, there are two ways to setup local apic and io-apic in X86 arch: 1. In an SMP-capable system, it will be done when preparing the cpus in native_smp_prepare_boot_cpu(). 2. If UP_LATE_INIT is y, it will be done in smp_init() And, there are many switches in kernel which can determine the way of APIC mode setup, as shown below: 1. kconfig : CONFIG_X86_64; CONFIG_X86_LOCAL_APIC; CONFIG_x86_IO_APIC 2. kernel option: disable_apic; skip_ioapic_setup 3. BIOS : boot_cpu_has(X86_FEATURE_APIC) 4. MP table: smp_found_config 5. ACPI: acpi_lapic; acpi_ioapic; nr_ioapic The setup is late which cause the dump-capture kernel hangs with 'notsc' option in 1st kernel option. and the use of these switches is messily. Before make the APIC mode setup earlier, construct a framework first to prepare for the work and make the logic clear. Calling that a framework is slightly exaggerated. It's a selector function for the interrupt delivery mode. Yes, Selector is what I want. To tell the truth, I've been looking for a word that can summarize this patch for a long time. :) #ifdef CONFIG_X86_X2APIC diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index f4fc949..bf4ccd0 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1153,6 +1153,63 @@ void __init sync_Arb_IDs(void) APIC_INT_LEVELTRIG | APIC_DM_INIT); } +enum apic_bsp_mode { + APIC_BSP_MODEL_PIC = 0, + APIC_BSP_MODEL_VIRTUAL_WIRE, + APIC_BSP_MODEL_SYMMETRIC_IO, + APIC_BSP_MODEL_COUNT +}; + +static int __init apic_bsp_mode_check(void) +{ + + /* Check kernel option */ + if (disable_apic) { + pr_info("APIC disabled by kernel option\n"); kernel option is ambiguous. "APIC disabled via kernel command line" is telling clearly where this comes from. Thanks, will modify in my next version. + return APIC_BSP_MODEL_PIC; + } + /* Check BOIS */ +#ifdef CONFIG_X86_64 + /* On 64-bit, The APIC is integrated, So, must have APIC feature */ + if (!boot_cpu_has(X86_FEATURE_APIC)) { + disable_apic = 1; + pr_info("Apic disabled by BIOS\n"); Please use APIC consistently. Oops, Yes. + return APIC_BSP_MODEL_PIC; + } +#else + if (!boot_cpu_has(X86_FEATURE_APIC) && + APIC_INTEGRATED(boot_cpu_apic_version)) { + pr_err("BIOS bug, local APIC #%d not detected!...\n", + boot_cpu_physical_apicid); Please make that pr_err(FW_BUG, "Local APIC %d not detected, force emulation", boot_cpu_physical_apicid); and for consistency reasosns this should also set disable_apic to 1. + return APIC_BSP_MODEL_PIC; Yes. I will. + } +#endif + /* +* Check MP table, if neither an integrated nor a separate chip +* doesn't exist. +*/ + if (!boot_cpu_has(X86_FEATURE_APIC) && !smp_found_config) { + pr_info("BOIS don't support APIC, and no SMP configuration.\n"); s/BOIS/BIOS/ and for consistency reasosns this should also set disable_apic to 1. OK. + return APIC_BSP_MODEL_PIC; + } + + /* Check MP table, ps: if the virtual wire has been setup */ + if (!smp_found_config) { + disable_ioapic_support(); + + /* Check local APIC, if SMP_NO_CONFIG */ + if (!acpi_lapic) + pr_info("SMP motherboard not detected\n"); + + return APIC_BSP_MODEL_VIRTUAL_WIRE; + } + + /* Other checks of ACPI options will be done in each setup function */ + + return APIC_BSP_MODEL_SYMMETRIC_IO; +} + /* * Setup the through-local-APIC virtual wire mode. */ @@ -1202,6 +1259,22 @@ void apic_virture_wire_mode_setup(void) apic_write(APIC_LVT1, value); } +/* init the interrupt routing model for the BSP */ +void __init init_bsp_APIC(void) +{ + switch (apic_bsp_mode_check()) { + case APIC_BSP_MODEL_PIC: + pr_info("Keep in PIC mode(8259)\n"); + return; + case APIC_BSP_MODEL_VIRTUAL_WIRE: + pr_info("switch to virtual wire model.\n"); Please consistently start sentences with upper case letters. Yes, I will check all the sentences and comments again carefully. Thanks, Liyang Thanks, tglx
Re: [RFC PATCH 2/6] x86/apic: Construct a framework for setuping APIC mode as soon as possible
Hi Thomas, At 04/05/2017 07:46 PM, Thomas Gleixner wrote: On Wed, 29 Mar 2017, Dou Liyang wrote: Now, there are two ways to setup local apic and io-apic in X86 arch: 1. In an SMP-capable system, it will be done when preparing the cpus in native_smp_prepare_boot_cpu(). 2. If UP_LATE_INIT is y, it will be done in smp_init() And, there are many switches in kernel which can determine the way of APIC mode setup, as shown below: 1. kconfig : CONFIG_X86_64; CONFIG_X86_LOCAL_APIC; CONFIG_x86_IO_APIC 2. kernel option: disable_apic; skip_ioapic_setup 3. BIOS : boot_cpu_has(X86_FEATURE_APIC) 4. MP table: smp_found_config 5. ACPI: acpi_lapic; acpi_ioapic; nr_ioapic The setup is late which cause the dump-capture kernel hangs with 'notsc' option in 1st kernel option. and the use of these switches is messily. Before make the APIC mode setup earlier, construct a framework first to prepare for the work and make the logic clear. Calling that a framework is slightly exaggerated. It's a selector function for the interrupt delivery mode. Yes, Selector is what I want. To tell the truth, I've been looking for a word that can summarize this patch for a long time. :) #ifdef CONFIG_X86_X2APIC diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index f4fc949..bf4ccd0 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1153,6 +1153,63 @@ void __init sync_Arb_IDs(void) APIC_INT_LEVELTRIG | APIC_DM_INIT); } +enum apic_bsp_mode { + APIC_BSP_MODEL_PIC = 0, + APIC_BSP_MODEL_VIRTUAL_WIRE, + APIC_BSP_MODEL_SYMMETRIC_IO, + APIC_BSP_MODEL_COUNT +}; + +static int __init apic_bsp_mode_check(void) +{ + + /* Check kernel option */ + if (disable_apic) { + pr_info("APIC disabled by kernel option\n"); kernel option is ambiguous. "APIC disabled via kernel command line" is telling clearly where this comes from. Thanks, will modify in my next version. + return APIC_BSP_MODEL_PIC; + } + /* Check BOIS */ +#ifdef CONFIG_X86_64 + /* On 64-bit, The APIC is integrated, So, must have APIC feature */ + if (!boot_cpu_has(X86_FEATURE_APIC)) { + disable_apic = 1; + pr_info("Apic disabled by BIOS\n"); Please use APIC consistently. Oops, Yes. + return APIC_BSP_MODEL_PIC; + } +#else + if (!boot_cpu_has(X86_FEATURE_APIC) && + APIC_INTEGRATED(boot_cpu_apic_version)) { + pr_err("BIOS bug, local APIC #%d not detected!...\n", + boot_cpu_physical_apicid); Please make that pr_err(FW_BUG, "Local APIC %d not detected, force emulation", boot_cpu_physical_apicid); and for consistency reasosns this should also set disable_apic to 1. + return APIC_BSP_MODEL_PIC; Yes. I will. + } +#endif + /* +* Check MP table, if neither an integrated nor a separate chip +* doesn't exist. +*/ + if (!boot_cpu_has(X86_FEATURE_APIC) && !smp_found_config) { + pr_info("BOIS don't support APIC, and no SMP configuration.\n"); s/BOIS/BIOS/ and for consistency reasosns this should also set disable_apic to 1. OK. + return APIC_BSP_MODEL_PIC; + } + + /* Check MP table, ps: if the virtual wire has been setup */ + if (!smp_found_config) { + disable_ioapic_support(); + + /* Check local APIC, if SMP_NO_CONFIG */ + if (!acpi_lapic) + pr_info("SMP motherboard not detected\n"); + + return APIC_BSP_MODEL_VIRTUAL_WIRE; + } + + /* Other checks of ACPI options will be done in each setup function */ + + return APIC_BSP_MODEL_SYMMETRIC_IO; +} + /* * Setup the through-local-APIC virtual wire mode. */ @@ -1202,6 +1259,22 @@ void apic_virture_wire_mode_setup(void) apic_write(APIC_LVT1, value); } +/* init the interrupt routing model for the BSP */ +void __init init_bsp_APIC(void) +{ + switch (apic_bsp_mode_check()) { + case APIC_BSP_MODEL_PIC: + pr_info("Keep in PIC mode(8259)\n"); + return; + case APIC_BSP_MODEL_VIRTUAL_WIRE: + pr_info("switch to virtual wire model.\n"); Please consistently start sentences with upper case letters. Yes, I will check all the sentences and comments again carefully. Thanks, Liyang Thanks, tglx
Re: [RFC PATCH 2/6] x86/apic: Construct a framework for setuping APIC mode as soon as possible
On Wed, 29 Mar 2017, Dou Liyang wrote: > Now, there are two ways to setup local apic and io-apic in X86 arch: > 1. In an SMP-capable system, it will be done when preparing the > cpus in native_smp_prepare_boot_cpu(). > 2. If UP_LATE_INIT is y, it will be done in smp_init() > > And, there are many switches in kernel which can determine the way of > APIC mode setup, as shown below: > > 1. kconfig : > CONFIG_X86_64; CONFIG_X86_LOCAL_APIC; CONFIG_x86_IO_APIC > 2. kernel option: disable_apic; skip_ioapic_setup > 3. BIOS : boot_cpu_has(X86_FEATURE_APIC) > 4. MP table: smp_found_config > 5. ACPI: acpi_lapic; acpi_ioapic; nr_ioapic > > The setup is late which cause the dump-capture kernel hangs with 'notsc' > option in 1st kernel option. and the use of these switches is messily. > > Before make the APIC mode setup earlier, construct a framework first to > prepare for the work and make the logic clear. Calling that a framework is slightly exaggerated. It's a selector function for the interrupt delivery mode. > #ifdef CONFIG_X86_X2APIC > diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c > index f4fc949..bf4ccd0 100644 > --- a/arch/x86/kernel/apic/apic.c > +++ b/arch/x86/kernel/apic/apic.c > @@ -1153,6 +1153,63 @@ void __init sync_Arb_IDs(void) > APIC_INT_LEVELTRIG | APIC_DM_INIT); > } > > +enum apic_bsp_mode { > + APIC_BSP_MODEL_PIC = 0, > + APIC_BSP_MODEL_VIRTUAL_WIRE, > + APIC_BSP_MODEL_SYMMETRIC_IO, > + APIC_BSP_MODEL_COUNT > +}; > + > +static int __init apic_bsp_mode_check(void) > +{ > + > + /* Check kernel option */ > + if (disable_apic) { > + pr_info("APIC disabled by kernel option\n"); kernel option is ambiguous. "APIC disabled via kernel command line" is telling clearly where this comes from. > + return APIC_BSP_MODEL_PIC; > + } > + /* Check BOIS */ > +#ifdef CONFIG_X86_64 > + /* On 64-bit, The APIC is integrated, So, must have APIC feature */ > + if (!boot_cpu_has(X86_FEATURE_APIC)) { > + disable_apic = 1; > + pr_info("Apic disabled by BIOS\n"); Please use APIC consistently. > + return APIC_BSP_MODEL_PIC; > + } > +#else > + if (!boot_cpu_has(X86_FEATURE_APIC) && > + APIC_INTEGRATED(boot_cpu_apic_version)) { > + pr_err("BIOS bug, local APIC #%d not detected!...\n", > + boot_cpu_physical_apicid); Please make that pr_err(FW_BUG, "Local APIC %d not detected, force emulation", boot_cpu_physical_apicid); and for consistency reasosns this should also set disable_apic to 1. > + return APIC_BSP_MODEL_PIC; > + } > +#endif > + /* > + * Check MP table, if neither an integrated nor a separate chip > + * doesn't exist. > + */ > + if (!boot_cpu_has(X86_FEATURE_APIC) && !smp_found_config) { > + pr_info("BOIS don't support APIC, and no SMP configuration.\n"); s/BOIS/BIOS/ and for consistency reasosns this should also set disable_apic to 1. > + return APIC_BSP_MODEL_PIC; > + } > + > + /* Check MP table, ps: if the virtual wire has been setup */ > + if (!smp_found_config) { > + disable_ioapic_support(); > + > + /* Check local APIC, if SMP_NO_CONFIG */ > + if (!acpi_lapic) > + pr_info("SMP motherboard not detected\n"); > + > + return APIC_BSP_MODEL_VIRTUAL_WIRE; > + } > + > + /* Other checks of ACPI options will be done in each setup function */ > + > + return APIC_BSP_MODEL_SYMMETRIC_IO; > +} > + > /* > * Setup the through-local-APIC virtual wire mode. > */ > @@ -1202,6 +1259,22 @@ void apic_virture_wire_mode_setup(void) > apic_write(APIC_LVT1, value); > } > > +/* init the interrupt routing model for the BSP */ > +void __init init_bsp_APIC(void) > +{ > + switch (apic_bsp_mode_check()) { > + case APIC_BSP_MODEL_PIC: > + pr_info("Keep in PIC mode(8259)\n"); > + return; > + case APIC_BSP_MODEL_VIRTUAL_WIRE: > + pr_info("switch to virtual wire model.\n"); Please consistenly start sentences with upper case letters. Thanks, tglx
Re: [RFC PATCH 2/6] x86/apic: Construct a framework for setuping APIC mode as soon as possible
On Wed, 29 Mar 2017, Dou Liyang wrote: > Now, there are two ways to setup local apic and io-apic in X86 arch: > 1. In an SMP-capable system, it will be done when preparing the > cpus in native_smp_prepare_boot_cpu(). > 2. If UP_LATE_INIT is y, it will be done in smp_init() > > And, there are many switches in kernel which can determine the way of > APIC mode setup, as shown below: > > 1. kconfig : > CONFIG_X86_64; CONFIG_X86_LOCAL_APIC; CONFIG_x86_IO_APIC > 2. kernel option: disable_apic; skip_ioapic_setup > 3. BIOS : boot_cpu_has(X86_FEATURE_APIC) > 4. MP table: smp_found_config > 5. ACPI: acpi_lapic; acpi_ioapic; nr_ioapic > > The setup is late which cause the dump-capture kernel hangs with 'notsc' > option in 1st kernel option. and the use of these switches is messily. > > Before make the APIC mode setup earlier, construct a framework first to > prepare for the work and make the logic clear. Calling that a framework is slightly exaggerated. It's a selector function for the interrupt delivery mode. > #ifdef CONFIG_X86_X2APIC > diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c > index f4fc949..bf4ccd0 100644 > --- a/arch/x86/kernel/apic/apic.c > +++ b/arch/x86/kernel/apic/apic.c > @@ -1153,6 +1153,63 @@ void __init sync_Arb_IDs(void) > APIC_INT_LEVELTRIG | APIC_DM_INIT); > } > > +enum apic_bsp_mode { > + APIC_BSP_MODEL_PIC = 0, > + APIC_BSP_MODEL_VIRTUAL_WIRE, > + APIC_BSP_MODEL_SYMMETRIC_IO, > + APIC_BSP_MODEL_COUNT > +}; > + > +static int __init apic_bsp_mode_check(void) > +{ > + > + /* Check kernel option */ > + if (disable_apic) { > + pr_info("APIC disabled by kernel option\n"); kernel option is ambiguous. "APIC disabled via kernel command line" is telling clearly where this comes from. > + return APIC_BSP_MODEL_PIC; > + } > + /* Check BOIS */ > +#ifdef CONFIG_X86_64 > + /* On 64-bit, The APIC is integrated, So, must have APIC feature */ > + if (!boot_cpu_has(X86_FEATURE_APIC)) { > + disable_apic = 1; > + pr_info("Apic disabled by BIOS\n"); Please use APIC consistently. > + return APIC_BSP_MODEL_PIC; > + } > +#else > + if (!boot_cpu_has(X86_FEATURE_APIC) && > + APIC_INTEGRATED(boot_cpu_apic_version)) { > + pr_err("BIOS bug, local APIC #%d not detected!...\n", > + boot_cpu_physical_apicid); Please make that pr_err(FW_BUG, "Local APIC %d not detected, force emulation", boot_cpu_physical_apicid); and for consistency reasosns this should also set disable_apic to 1. > + return APIC_BSP_MODEL_PIC; > + } > +#endif > + /* > + * Check MP table, if neither an integrated nor a separate chip > + * doesn't exist. > + */ > + if (!boot_cpu_has(X86_FEATURE_APIC) && !smp_found_config) { > + pr_info("BOIS don't support APIC, and no SMP configuration.\n"); s/BOIS/BIOS/ and for consistency reasosns this should also set disable_apic to 1. > + return APIC_BSP_MODEL_PIC; > + } > + > + /* Check MP table, ps: if the virtual wire has been setup */ > + if (!smp_found_config) { > + disable_ioapic_support(); > + > + /* Check local APIC, if SMP_NO_CONFIG */ > + if (!acpi_lapic) > + pr_info("SMP motherboard not detected\n"); > + > + return APIC_BSP_MODEL_VIRTUAL_WIRE; > + } > + > + /* Other checks of ACPI options will be done in each setup function */ > + > + return APIC_BSP_MODEL_SYMMETRIC_IO; > +} > + > /* > * Setup the through-local-APIC virtual wire mode. > */ > @@ -1202,6 +1259,22 @@ void apic_virture_wire_mode_setup(void) > apic_write(APIC_LVT1, value); > } > > +/* init the interrupt routing model for the BSP */ > +void __init init_bsp_APIC(void) > +{ > + switch (apic_bsp_mode_check()) { > + case APIC_BSP_MODEL_PIC: > + pr_info("Keep in PIC mode(8259)\n"); > + return; > + case APIC_BSP_MODEL_VIRTUAL_WIRE: > + pr_info("switch to virtual wire model.\n"); Please consistenly start sentences with upper case letters. Thanks, tglx
[RFC PATCH 2/6] x86/apic: Construct a framework for setuping APIC mode as soon as possible
Now, there are two ways to setup local apic and io-apic in X86 arch: 1. In an SMP-capable system, it will be done when preparing the cpus in native_smp_prepare_boot_cpu(). 2. If UP_LATE_INIT is y, it will be done in smp_init() And, there are many switches in kernel which can determine the way of APIC mode setup, as shown below: 1. kconfig : CONFIG_X86_64; CONFIG_X86_LOCAL_APIC; CONFIG_x86_IO_APIC 2. kernel option: disable_apic; skip_ioapic_setup 3. BIOS : boot_cpu_has(X86_FEATURE_APIC) 4. MP table: smp_found_config 5. ACPI: acpi_lapic; acpi_ioapic; nr_ioapic The setup is late which cause the dump-capture kernel hangs with 'notsc' option in 1st kernel option. and the use of these switches is messily. Before make the APIC mode setup earlier, construct a framework first to prepare for the work and make the logic clear. Signed-off-by: Dou Liyang--- arch/x86/include/asm/apic.h | 2 ++ arch/x86/kernel/apic/apic.c | 73 + arch/x86/kernel/irqinit.c | 3 ++ 3 files changed, 78 insertions(+) diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 20ac73c..c973f18 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -172,6 +172,8 @@ static inline void disable_local_APIC(void) { } # define setup_secondary_APIC_clock x86_init_noop static inline void lapic_update_tsc_freq(void) { } static inline void apic_virture_wire_mode_setup(void) {} +static inline void init_bsp_APIC(void) {} + #endif /* !CONFIG_X86_LOCAL_APIC */ #ifdef CONFIG_X86_X2APIC diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index f4fc949..bf4ccd0 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1153,6 +1153,63 @@ void __init sync_Arb_IDs(void) APIC_INT_LEVELTRIG | APIC_DM_INIT); } +enum apic_bsp_mode { + APIC_BSP_MODEL_PIC = 0, + APIC_BSP_MODEL_VIRTUAL_WIRE, + APIC_BSP_MODEL_SYMMETRIC_IO, + APIC_BSP_MODEL_COUNT +}; + +static int __init apic_bsp_mode_check(void) +{ + + /* Check kernel option */ + if (disable_apic) { + pr_info("APIC disabled by kernel option\n"); + return APIC_BSP_MODEL_PIC; + } + /* Check BOIS */ +#ifdef CONFIG_X86_64 + /* On 64-bit, The APIC is integrated, So, must have APIC feature */ + if (!boot_cpu_has(X86_FEATURE_APIC)) { + disable_apic = 1; + pr_info("Apic disabled by BIOS\n"); + return APIC_BSP_MODEL_PIC; + } +#else + if (!boot_cpu_has(X86_FEATURE_APIC) && + APIC_INTEGRATED(boot_cpu_apic_version)) { + pr_err("BIOS bug, local APIC #%d not detected!...\n", + boot_cpu_physical_apicid); + pr_err("... forcing use of dummy APIC emulation (tell your hw vendor)\n"); + return APIC_BSP_MODEL_PIC; + } +#endif + /* +* Check MP table, if neither an integrated nor a separate chip +* doesn't exist. +*/ + if (!boot_cpu_has(X86_FEATURE_APIC) && !smp_found_config) { + pr_info("BOIS don't support APIC, and no SMP configuration.\n"); + return APIC_BSP_MODEL_PIC; + } + + /* Check MP table, ps: if the virtual wire has been setup */ + if (!smp_found_config) { + disable_ioapic_support(); + + /* Check local APIC, if SMP_NO_CONFIG */ + if (!acpi_lapic) + pr_info("SMP motherboard not detected\n"); + + return APIC_BSP_MODEL_VIRTUAL_WIRE; + } + + /* Other checks of ACPI options will be done in each setup function */ + + return APIC_BSP_MODEL_SYMMETRIC_IO; +} + /* * Setup the through-local-APIC virtual wire mode. */ @@ -1202,6 +1259,22 @@ void apic_virture_wire_mode_setup(void) apic_write(APIC_LVT1, value); } +/* init the interrupt routing model for the BSP */ +void __init init_bsp_APIC(void) +{ + switch (apic_bsp_mode_check()) { + case APIC_BSP_MODEL_PIC: + pr_info("Keep in PIC mode(8259)\n"); + return; + case APIC_BSP_MODEL_VIRTUAL_WIRE: + pr_info("switch to virtual wire model.\n"); + return; + case APIC_BSP_MODEL_SYMMETRIC_IO: + pr_info("switch to symmectic I/O model.\n"); + return; + } +} + static void lapic_setup_esr(void) { unsigned int oldvalue, value, maxlvt; diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index b6ef4ea..f30fb16 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -197,4 +197,7 @@ void __init native_init_IRQ(void) #ifdef CONFIG_X86_32 irq_ctx_init(smp_processor_id()); #endif + + /* init the IRQ Mode for BSP */ + init_bsp_APIC(); } -- 2.5.5
[RFC PATCH 2/6] x86/apic: Construct a framework for setuping APIC mode as soon as possible
Now, there are two ways to setup local apic and io-apic in X86 arch: 1. In an SMP-capable system, it will be done when preparing the cpus in native_smp_prepare_boot_cpu(). 2. If UP_LATE_INIT is y, it will be done in smp_init() And, there are many switches in kernel which can determine the way of APIC mode setup, as shown below: 1. kconfig : CONFIG_X86_64; CONFIG_X86_LOCAL_APIC; CONFIG_x86_IO_APIC 2. kernel option: disable_apic; skip_ioapic_setup 3. BIOS : boot_cpu_has(X86_FEATURE_APIC) 4. MP table: smp_found_config 5. ACPI: acpi_lapic; acpi_ioapic; nr_ioapic The setup is late which cause the dump-capture kernel hangs with 'notsc' option in 1st kernel option. and the use of these switches is messily. Before make the APIC mode setup earlier, construct a framework first to prepare for the work and make the logic clear. Signed-off-by: Dou Liyang --- arch/x86/include/asm/apic.h | 2 ++ arch/x86/kernel/apic/apic.c | 73 + arch/x86/kernel/irqinit.c | 3 ++ 3 files changed, 78 insertions(+) diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 20ac73c..c973f18 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -172,6 +172,8 @@ static inline void disable_local_APIC(void) { } # define setup_secondary_APIC_clock x86_init_noop static inline void lapic_update_tsc_freq(void) { } static inline void apic_virture_wire_mode_setup(void) {} +static inline void init_bsp_APIC(void) {} + #endif /* !CONFIG_X86_LOCAL_APIC */ #ifdef CONFIG_X86_X2APIC diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index f4fc949..bf4ccd0 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1153,6 +1153,63 @@ void __init sync_Arb_IDs(void) APIC_INT_LEVELTRIG | APIC_DM_INIT); } +enum apic_bsp_mode { + APIC_BSP_MODEL_PIC = 0, + APIC_BSP_MODEL_VIRTUAL_WIRE, + APIC_BSP_MODEL_SYMMETRIC_IO, + APIC_BSP_MODEL_COUNT +}; + +static int __init apic_bsp_mode_check(void) +{ + + /* Check kernel option */ + if (disable_apic) { + pr_info("APIC disabled by kernel option\n"); + return APIC_BSP_MODEL_PIC; + } + /* Check BOIS */ +#ifdef CONFIG_X86_64 + /* On 64-bit, The APIC is integrated, So, must have APIC feature */ + if (!boot_cpu_has(X86_FEATURE_APIC)) { + disable_apic = 1; + pr_info("Apic disabled by BIOS\n"); + return APIC_BSP_MODEL_PIC; + } +#else + if (!boot_cpu_has(X86_FEATURE_APIC) && + APIC_INTEGRATED(boot_cpu_apic_version)) { + pr_err("BIOS bug, local APIC #%d not detected!...\n", + boot_cpu_physical_apicid); + pr_err("... forcing use of dummy APIC emulation (tell your hw vendor)\n"); + return APIC_BSP_MODEL_PIC; + } +#endif + /* +* Check MP table, if neither an integrated nor a separate chip +* doesn't exist. +*/ + if (!boot_cpu_has(X86_FEATURE_APIC) && !smp_found_config) { + pr_info("BOIS don't support APIC, and no SMP configuration.\n"); + return APIC_BSP_MODEL_PIC; + } + + /* Check MP table, ps: if the virtual wire has been setup */ + if (!smp_found_config) { + disable_ioapic_support(); + + /* Check local APIC, if SMP_NO_CONFIG */ + if (!acpi_lapic) + pr_info("SMP motherboard not detected\n"); + + return APIC_BSP_MODEL_VIRTUAL_WIRE; + } + + /* Other checks of ACPI options will be done in each setup function */ + + return APIC_BSP_MODEL_SYMMETRIC_IO; +} + /* * Setup the through-local-APIC virtual wire mode. */ @@ -1202,6 +1259,22 @@ void apic_virture_wire_mode_setup(void) apic_write(APIC_LVT1, value); } +/* init the interrupt routing model for the BSP */ +void __init init_bsp_APIC(void) +{ + switch (apic_bsp_mode_check()) { + case APIC_BSP_MODEL_PIC: + pr_info("Keep in PIC mode(8259)\n"); + return; + case APIC_BSP_MODEL_VIRTUAL_WIRE: + pr_info("switch to virtual wire model.\n"); + return; + case APIC_BSP_MODEL_SYMMETRIC_IO: + pr_info("switch to symmectic I/O model.\n"); + return; + } +} + static void lapic_setup_esr(void) { unsigned int oldvalue, value, maxlvt; diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index b6ef4ea..f30fb16 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -197,4 +197,7 @@ void __init native_init_IRQ(void) #ifdef CONFIG_X86_32 irq_ctx_init(smp_processor_id()); #endif + + /* init the IRQ Mode for BSP */ + init_bsp_APIC(); } -- 2.5.5