Re: How to boot 2.6 kernel using hp ski simulator ???
Please check out http://www.gelato.unsw.edu.au/IA64wiki/SkiSimulator for lots of info on Ski. It works fine with Linux 2.6; and hugepage work too. > 1) I used 'make ARCH=ia64 menuconfig' to configure and followed the > steps to get kernel image of version 2.6 ! I also selected the generic > type as Ski-simulator and also selected the HP-ski drivers something > simscsi,etc.etc. I suggest you start with make sim_defconfig Your symptoms look like a misconigured or misbuilt vmlinux. The sim_defconfig If you're running on IA32, then you need something like: make CROSS_COMPILE=ia64-linux-gnu ARCH=ia64 boot to build kernel and bootloader. You need to get or build yourself a disk image. Instructions for building at http://www.gelato.unsw.edu.au/IA64wiki/skidiskimage -- Dr Peter Chubb http://www.gelato.unsw.edu.au peterc AT gelato.unsw.edu.au http://www.ertos.nicta.com.au ERTOS within National ICT Australia - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: How to boot 2.6 kernel using hp ski simulator ???
Please check out http://www.gelato.unsw.edu.au/IA64wiki/SkiSimulator for lots of info on Ski. It works fine with Linux 2.6; and hugepage work too. 1) I used 'make ARCH=ia64 menuconfig' to configure and followed the steps to get kernel image of version 2.6 ! I also selected the generic type as Ski-simulator and also selected the HP-ski drivers something simscsi,etc.etc. I suggest you start with make sim_defconfig Your symptoms look like a misconigured or misbuilt vmlinux. The sim_defconfig If you're running on IA32, then you need something like: make CROSS_COMPILE=ia64-linux-gnu ARCH=ia64 boot to build kernel and bootloader. You need to get or build yourself a disk image. Instructions for building at http://www.gelato.unsw.edu.au/IA64wiki/skidiskimage -- Dr Peter Chubb http://www.gelato.unsw.edu.au peterc AT gelato.unsw.edu.au http://www.ertos.nicta.com.au ERTOS within National ICT Australia - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
How to boot 2.6 kernel using hp ski simulator ???
Hey all ! I wanted to boot 2.6 kernel configured for ia64 architecture on ia32 archi using hp ski simulator ! But I failed to do so ! I followed the following steps: 1) I used 'make ARCH=ia64 menuconfig' to configure and followed the steps to get kernel image of version 2.6 ! I also selected the generic type as Ski-simulator and also selected the HP-ski drivers something simscsi,etc.etc. 2) After this I gave the following command for the ski installed in my OS kernel version 2.6 : $ ski bootloader vmlinux simscsi=/var/ski-disks/sd 3) Then gave run to start the process.The screen with the output as "loading vmlinux" was displayed and the process haltedno working further ! Querries: 1) I am not getting what is happenning for 2.6 configured with ia64??? ..But I also downloaded the bootloader and vmlinux for 2.4 from Hp ski simulator home site and tried with the above 2 steps and the 2.4 kernel was booted successfullyI dont know whether this kernel image is configured for ia64 but whatever it worked ! 2) Does ski supports for 2.6 kernel configured with ia64 archi as done in above stepno : 2) ?? 3) How can we use sda i.e simulated filesystemlike can we mount it ?? Or whenever the kernel is booted using ski command the filesystem it uses is sda ??? Thank You Please kindly Reply ! - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
How to boot 2.6 kernel using hp ski simulator ???
Hey all ! I wanted to boot 2.6 kernel configured for ia64 architecture on ia32 archi using hp ski simulator ! But I failed to do so ! I followed the following steps: 1) I used 'make ARCH=ia64 menuconfig' to configure and followed the steps to get kernel image of version 2.6 ! I also selected the generic type as Ski-simulator and also selected the HP-ski drivers something simscsi,etc.etc. 2) After this I gave the following command for the ski installed in my OS kernel version 2.6 : $ ski bootloader vmlinux simscsi=/var/ski-disks/sd 3) Then gave run to start the process.The screen with the output as loading vmlinux was displayed and the process haltedno working further ! Querries: 1) I am not getting what is happenning for 2.6 configured with ia64??? ..But I also downloaded the bootloader and vmlinux for 2.4 from Hp ski simulator home site and tried with the above 2 steps and the 2.4 kernel was booted successfullyI dont know whether this kernel image is configured for ia64 but whatever it worked ! 2) Does ski supports for 2.6 kernel configured with ia64 archi as done in above stepno : 2) ?? 3) How can we use sda i.e simulated filesystemlike can we mount it ?? Or whenever the kernel is booted using ski command the filesystem it uses is sda ??? Thank You Please kindly Reply ! - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/