Re: [PATCH] drm/msm/a6xx: fix for kernels without CONFIG_NVMEM
On 4/2/2021 3:19 AM, Rob Clark wrote: On Thu, Apr 1, 2021 at 2:03 PM Dmitry Baryshkov wrote: On Thu, 1 Apr 2021 at 23:09, Rob Clark wrote: On Mon, Feb 22, 2021 at 8:06 AM Rob Clark wrote: On Mon, Feb 22, 2021 at 7:45 AM Akhil P Oommen wrote: On 2/19/2021 9:30 PM, Rob Clark wrote: On Fri, Feb 19, 2021 at 2:44 AM Akhil P Oommen wrote: On 2/18/2021 9:41 PM, Rob Clark wrote: On Thu, Feb 18, 2021 at 4:28 AM Akhil P Oommen wrote: On 2/18/2021 2:05 AM, Jonathan Marek wrote: On 2/17/21 3:18 PM, Rob Clark wrote: On Wed, Feb 17, 2021 at 11:08 AM Jordan Crouse wrote: On Wed, Feb 17, 2021 at 07:14:16PM +0530, Akhil P Oommen wrote: On 2/17/2021 8:36 AM, Rob Clark wrote: On Tue, Feb 16, 2021 at 12:10 PM Jonathan Marek wrote: Ignore nvmem_cell_get() EOPNOTSUPP error in the same way as a ENOENT error, to fix the case where the kernel was compiled without CONFIG_NVMEM. Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 gpu") Signed-off-by: Jonathan Marek --- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index ba8e9d3cf0fe..7fe5d97606aa 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -1356,10 +1356,10 @@ static int a6xx_set_supported_hw(struct device *dev, struct a6xx_gpu *a6xx_gpu, cell = nvmem_cell_get(dev, "speed_bin"); /* -* -ENOENT means that the platform doesn't support speedbin which is -* fine +* -ENOENT means no speed bin in device tree, +* -EOPNOTSUPP means kernel was built without CONFIG_NVMEM very minor nit, it would be nice to at least preserve the gist of the "which is fine" (ie. some variation of "this is an optional thing and things won't catch fire without it" ;-)) (which is, I believe, is true, hopefully Akhil could confirm.. if not we should have a harder dependency on CONFIG_NVMEM..) IIRC, if the gpu opp table in the DT uses the 'opp-supported-hw' property, we will see some error during boot up if we don't call dev_pm_opp_set_supported_hw(). So calling "nvmem_cell_get(dev, "speed_bin")" is a way to test this. If there is no other harm, we can put a hard dependency on CONFIG_NVMEM. I'm not sure if we want to go this far given the squishiness about module dependencies. As far as I know we are the only driver that uses this seriously on QCOM SoCs and this is only needed for certain targets. I don't know if we want to force every target to build NVMEM and QFPROM on our behalf. But maybe I'm just saying that because Kconfig dependencies tend to break my brain (and then Arnd has to send a patch to fix it). Hmm, good point.. looks like CONFIG_NVMEM itself doesn't have any other dependencies, so I suppose it wouldn't be the end of the world to select that.. but I guess we don't want to require QFPROM I guess at the end of the day, what is the failure mode if you have a speed-bin device, but your kernel config misses QFPROM (and possibly NVMEM)? If the result is just not having the highest clk rate(s) Atleast on sc7180's gpu, using an unsupported FMAX breaks gmu. It won't be very obvious what went wrong when this happens! Ugg, ok.. I suppose we could select NVMEM, but not QFPROM, and then the case where QFPROM is not enabled on platforms that have the speed-bin field in DT will fail gracefully and all other platforms would continue on happily? BR, -R Sounds good to me. You probably should do a quick test with NVMEM enabled but QFPROM disabled to confirm my theory, but I *think* that should work BR, -R I tried it on an sc7180 device. The suggested combo (CONFIG_NVMEM + no CONFIG_QCOM_QFPROM) makes the gpu probe fail with error "failed to read speed-bin. Some OPPs may not be supported by hardware". This is good enough clue for the developer that he should fix the broken speedbin detection. Ok, great.. then sounds like selecting NVMEM is a good approach btw, did anyone ever send a patch to select NVMEM? I'm not seeing one but I could be overlooking something I thought Jonathan would send it as the discussion was going on in his patch. No problem, I will send it out. :) -Akhil. Judging by the amount of issues surrounding speed-bin, I might have a bold suggestion to revert these patches for now and get them once all the issues are sorted, so that we'd have a single working commit instead of scattered patch series breaking git bisect, having bad side-effects on non-sc7180 platforms, etc. We do really need some pre-merge CI like we have on the mesa side of things (and we at least have 845 devices in our CI farm, but it would be useful to add more generations).. but other than the config issue, I *think* this fixes the last of the speedbin fallout? https://patchwork.freedesktop.org/patch/426538/?series=88558&rev=1 Planning to include that in a -fixes pull req in the next day or
Re: [PATCH] drm/msm/a6xx: fix for kernels without CONFIG_NVMEM
On Thu, Apr 1, 2021 at 2:03 PM Dmitry Baryshkov wrote: > > On Thu, 1 Apr 2021 at 23:09, Rob Clark wrote: > > > > On Mon, Feb 22, 2021 at 8:06 AM Rob Clark wrote: > > > > > > On Mon, Feb 22, 2021 at 7:45 AM Akhil P Oommen > > > wrote: > > > > > > > > On 2/19/2021 9:30 PM, Rob Clark wrote: > > > > > On Fri, Feb 19, 2021 at 2:44 AM Akhil P Oommen > > > > > wrote: > > > > >> > > > > >> On 2/18/2021 9:41 PM, Rob Clark wrote: > > > > >>> On Thu, Feb 18, 2021 at 4:28 AM Akhil P Oommen > > > > >>> wrote: > > > > > > > > On 2/18/2021 2:05 AM, Jonathan Marek wrote: > > > > > On 2/17/21 3:18 PM, Rob Clark wrote: > > > > >> On Wed, Feb 17, 2021 at 11:08 AM Jordan Crouse > > > > >> wrote: > > > > >>> > > > > >>> On Wed, Feb 17, 2021 at 07:14:16PM +0530, Akhil P Oommen wrote: > > > > On 2/17/2021 8:36 AM, Rob Clark wrote: > > > > > On Tue, Feb 16, 2021 at 12:10 PM Jonathan Marek > > > > > > > > > > wrote: > > > > >> > > > > >> Ignore nvmem_cell_get() EOPNOTSUPP error in the same way as a > > > > >> ENOENT error, > > > > >> to fix the case where the kernel was compiled without > > > > >> CONFIG_NVMEM. > > > > >> > > > > >> Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 > > > > >> gpu") > > > > >> Signed-off-by: Jonathan Marek > > > > >> --- > > > > >> drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 +++--- > > > > >> 1 file changed, 3 insertions(+), 3 deletions(-) > > > > >> > > > > >> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > > > > >> b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > > > > >> index ba8e9d3cf0fe..7fe5d97606aa 100644 > > > > >> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > > > > >> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > > > > >> @@ -1356,10 +1356,10 @@ static int > > > > >> a6xx_set_supported_hw(struct > > > > >> device *dev, struct a6xx_gpu *a6xx_gpu, > > > > >> > > > > >>cell = nvmem_cell_get(dev, "speed_bin"); > > > > >>/* > > > > >> -* -ENOENT means that the platform doesn't support > > > > >> speedbin which is > > > > >> -* fine > > > > >> +* -ENOENT means no speed bin in device tree, > > > > >> +* -EOPNOTSUPP means kernel was built without > > > > >> CONFIG_NVMEM > > > > > > > > > > very minor nit, it would be nice to at least preserve the > > > > > gist of the > > > > > "which is fine" (ie. some variation of "this is an optional > > > > > thing and > > > > > things won't catch fire without it" ;-)) > > > > > > > > > > (which is, I believe, is true, hopefully Akhil could > > > > > confirm.. if not > > > > > we should have a harder dependency on CONFIG_NVMEM..) > > > > IIRC, if the gpu opp table in the DT uses the > > > > 'opp-supported-hw' > > > > property, > > > > we will see some error during boot up if we don't call > > > > dev_pm_opp_set_supported_hw(). So calling "nvmem_cell_get(dev, > > > > "speed_bin")" > > > > is a way to test this. > > > > > > > > If there is no other harm, we can put a hard dependency on > > > > CONFIG_NVMEM. > > > > >>> > > > > >>> I'm not sure if we want to go this far given the squishiness > > > > >>> about > > > > >>> module > > > > >>> dependencies. As far as I know we are the only driver that uses > > > > >>> this > > > > >>> seriously > > > > >>> on QCOM SoCs and this is only needed for certain targets. I > > > > >>> don't > > > > >>> know if we > > > > >>> want to force every target to build NVMEM and QFPROM on our > > > > >>> behalf. > > > > >>> But maybe > > > > >>> I'm just saying that because Kconfig dependencies tend to break > > > > >>> my > > > > >>> brain (and > > > > >>> then Arnd has to send a patch to fix it). > > > > >>> > > > > >> > > > > >> Hmm, good point.. looks like CONFIG_NVMEM itself doesn't have any > > > > >> other dependencies, so I suppose it wouldn't be the end of the > > > > >> world > > > > >> to select that.. but I guess we don't want to require QFPROM > > > > >> > > > > >> I guess at the end of the day, what is the failure mode if you > > > > >> have a > > > > >> speed-bin device, but your kernel config misses QFPROM (and > > > > >> possibly > > > > >> NVMEM)? If the result is just not having the highest clk rate(s) > > > > > > > > Atleast on sc7180's gpu, using an unsupported FMAX breaks gmu. It > > > > won't > > > > be very obvious what went wrong when this happens! > > > > >>> > > > > >>> Ugg, ok.. > > > > >>> > > > > >>> I sup
Re: [PATCH] drm/msm/a6xx: fix for kernels without CONFIG_NVMEM
On Thu, 1 Apr 2021 at 23:09, Rob Clark wrote: > > On Mon, Feb 22, 2021 at 8:06 AM Rob Clark wrote: > > > > On Mon, Feb 22, 2021 at 7:45 AM Akhil P Oommen > > wrote: > > > > > > On 2/19/2021 9:30 PM, Rob Clark wrote: > > > > On Fri, Feb 19, 2021 at 2:44 AM Akhil P Oommen > > > > wrote: > > > >> > > > >> On 2/18/2021 9:41 PM, Rob Clark wrote: > > > >>> On Thu, Feb 18, 2021 at 4:28 AM Akhil P Oommen > > > >>> wrote: > > > > > > On 2/18/2021 2:05 AM, Jonathan Marek wrote: > > > > On 2/17/21 3:18 PM, Rob Clark wrote: > > > >> On Wed, Feb 17, 2021 at 11:08 AM Jordan Crouse > > > >> wrote: > > > >>> > > > >>> On Wed, Feb 17, 2021 at 07:14:16PM +0530, Akhil P Oommen wrote: > > > On 2/17/2021 8:36 AM, Rob Clark wrote: > > > > On Tue, Feb 16, 2021 at 12:10 PM Jonathan Marek > > > > > > > > wrote: > > > >> > > > >> Ignore nvmem_cell_get() EOPNOTSUPP error in the same way as a > > > >> ENOENT error, > > > >> to fix the case where the kernel was compiled without > > > >> CONFIG_NVMEM. > > > >> > > > >> Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 > > > >> gpu") > > > >> Signed-off-by: Jonathan Marek > > > >> --- > > > >> drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 +++--- > > > >> 1 file changed, 3 insertions(+), 3 deletions(-) > > > >> > > > >> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > > > >> b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > > > >> index ba8e9d3cf0fe..7fe5d97606aa 100644 > > > >> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > > > >> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > > > >> @@ -1356,10 +1356,10 @@ static int a6xx_set_supported_hw(struct > > > >> device *dev, struct a6xx_gpu *a6xx_gpu, > > > >> > > > >>cell = nvmem_cell_get(dev, "speed_bin"); > > > >>/* > > > >> -* -ENOENT means that the platform doesn't support > > > >> speedbin which is > > > >> -* fine > > > >> +* -ENOENT means no speed bin in device tree, > > > >> +* -EOPNOTSUPP means kernel was built without > > > >> CONFIG_NVMEM > > > > > > > > very minor nit, it would be nice to at least preserve the gist > > > > of the > > > > "which is fine" (ie. some variation of "this is an optional > > > > thing and > > > > things won't catch fire without it" ;-)) > > > > > > > > (which is, I believe, is true, hopefully Akhil could confirm.. > > > > if not > > > > we should have a harder dependency on CONFIG_NVMEM..) > > > IIRC, if the gpu opp table in the DT uses the 'opp-supported-hw' > > > property, > > > we will see some error during boot up if we don't call > > > dev_pm_opp_set_supported_hw(). So calling "nvmem_cell_get(dev, > > > "speed_bin")" > > > is a way to test this. > > > > > > If there is no other harm, we can put a hard dependency on > > > CONFIG_NVMEM. > > > >>> > > > >>> I'm not sure if we want to go this far given the squishiness about > > > >>> module > > > >>> dependencies. As far as I know we are the only driver that uses > > > >>> this > > > >>> seriously > > > >>> on QCOM SoCs and this is only needed for certain targets. I don't > > > >>> know if we > > > >>> want to force every target to build NVMEM and QFPROM on our > > > >>> behalf. > > > >>> But maybe > > > >>> I'm just saying that because Kconfig dependencies tend to break my > > > >>> brain (and > > > >>> then Arnd has to send a patch to fix it). > > > >>> > > > >> > > > >> Hmm, good point.. looks like CONFIG_NVMEM itself doesn't have any > > > >> other dependencies, so I suppose it wouldn't be the end of the > > > >> world > > > >> to select that.. but I guess we don't want to require QFPROM > > > >> > > > >> I guess at the end of the day, what is the failure mode if you > > > >> have a > > > >> speed-bin device, but your kernel config misses QFPROM (and > > > >> possibly > > > >> NVMEM)? If the result is just not having the highest clk rate(s) > > > > > > Atleast on sc7180's gpu, using an unsupported FMAX breaks gmu. It > > > won't > > > be very obvious what went wrong when this happens! > > > >>> > > > >>> Ugg, ok.. > > > >>> > > > >>> I suppose we could select NVMEM, but not QFPROM, and then the case > > > >>> where QFPROM is not enabled on platforms that have the speed-bin field > > > >>> in DT will fail gracefully and all other platforms would continue on > > > >>> happily? > > > >>> > > > >>> BR, > > > >>> -R > > > >> > > > >> Sounds good to me. > > > >> > > > > > > > > You probably should d
Re: [PATCH] drm/msm/a6xx: fix for kernels without CONFIG_NVMEM
On Mon, Feb 22, 2021 at 8:06 AM Rob Clark wrote: > > On Mon, Feb 22, 2021 at 7:45 AM Akhil P Oommen wrote: > > > > On 2/19/2021 9:30 PM, Rob Clark wrote: > > > On Fri, Feb 19, 2021 at 2:44 AM Akhil P Oommen > > > wrote: > > >> > > >> On 2/18/2021 9:41 PM, Rob Clark wrote: > > >>> On Thu, Feb 18, 2021 at 4:28 AM Akhil P Oommen > > >>> wrote: > > > > On 2/18/2021 2:05 AM, Jonathan Marek wrote: > > > On 2/17/21 3:18 PM, Rob Clark wrote: > > >> On Wed, Feb 17, 2021 at 11:08 AM Jordan Crouse > > >> wrote: > > >>> > > >>> On Wed, Feb 17, 2021 at 07:14:16PM +0530, Akhil P Oommen wrote: > > On 2/17/2021 8:36 AM, Rob Clark wrote: > > > On Tue, Feb 16, 2021 at 12:10 PM Jonathan Marek > > > > > > wrote: > > >> > > >> Ignore nvmem_cell_get() EOPNOTSUPP error in the same way as a > > >> ENOENT error, > > >> to fix the case where the kernel was compiled without > > >> CONFIG_NVMEM. > > >> > > >> Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 > > >> gpu") > > >> Signed-off-by: Jonathan Marek > > >> --- > > >> drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 +++--- > > >> 1 file changed, 3 insertions(+), 3 deletions(-) > > >> > > >> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > > >> b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > > >> index ba8e9d3cf0fe..7fe5d97606aa 100644 > > >> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > > >> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > > >> @@ -1356,10 +1356,10 @@ static int a6xx_set_supported_hw(struct > > >> device *dev, struct a6xx_gpu *a6xx_gpu, > > >> > > >>cell = nvmem_cell_get(dev, "speed_bin"); > > >>/* > > >> -* -ENOENT means that the platform doesn't support > > >> speedbin which is > > >> -* fine > > >> +* -ENOENT means no speed bin in device tree, > > >> +* -EOPNOTSUPP means kernel was built without > > >> CONFIG_NVMEM > > > > > > very minor nit, it would be nice to at least preserve the gist of > > > the > > > "which is fine" (ie. some variation of "this is an optional thing > > > and > > > things won't catch fire without it" ;-)) > > > > > > (which is, I believe, is true, hopefully Akhil could confirm.. if > > > not > > > we should have a harder dependency on CONFIG_NVMEM..) > > IIRC, if the gpu opp table in the DT uses the 'opp-supported-hw' > > property, > > we will see some error during boot up if we don't call > > dev_pm_opp_set_supported_hw(). So calling "nvmem_cell_get(dev, > > "speed_bin")" > > is a way to test this. > > > > If there is no other harm, we can put a hard dependency on > > CONFIG_NVMEM. > > >>> > > >>> I'm not sure if we want to go this far given the squishiness about > > >>> module > > >>> dependencies. As far as I know we are the only driver that uses this > > >>> seriously > > >>> on QCOM SoCs and this is only needed for certain targets. I don't > > >>> know if we > > >>> want to force every target to build NVMEM and QFPROM on our behalf. > > >>> But maybe > > >>> I'm just saying that because Kconfig dependencies tend to break my > > >>> brain (and > > >>> then Arnd has to send a patch to fix it). > > >>> > > >> > > >> Hmm, good point.. looks like CONFIG_NVMEM itself doesn't have any > > >> other dependencies, so I suppose it wouldn't be the end of the world > > >> to select that.. but I guess we don't want to require QFPROM > > >> > > >> I guess at the end of the day, what is the failure mode if you have a > > >> speed-bin device, but your kernel config misses QFPROM (and possibly > > >> NVMEM)? If the result is just not having the highest clk rate(s) > > > > Atleast on sc7180's gpu, using an unsupported FMAX breaks gmu. It won't > > be very obvious what went wrong when this happens! > > >>> > > >>> Ugg, ok.. > > >>> > > >>> I suppose we could select NVMEM, but not QFPROM, and then the case > > >>> where QFPROM is not enabled on platforms that have the speed-bin field > > >>> in DT will fail gracefully and all other platforms would continue on > > >>> happily? > > >>> > > >>> BR, > > >>> -R > > >> > > >> Sounds good to me. > > >> > > > > > > You probably should do a quick test with NVMEM enabled but QFPROM > > > disabled to confirm my theory, but I *think* that should work > > > > > > BR, > > > -R > > > > > > > I tried it on an sc7180 device. The suggested combo (CONFIG_NVMEM + no > > CONFIG_QCOM_QFPROM) makes the gpu probe fail with error "failed to read > > speed-bin. Some OPPs may not be supported by hardware
Re: [PATCH] drm/msm/a6xx: fix for kernels without CONFIG_NVMEM
On Mon, Feb 22, 2021 at 7:45 AM Akhil P Oommen wrote: > > On 2/19/2021 9:30 PM, Rob Clark wrote: > > On Fri, Feb 19, 2021 at 2:44 AM Akhil P Oommen > > wrote: > >> > >> On 2/18/2021 9:41 PM, Rob Clark wrote: > >>> On Thu, Feb 18, 2021 at 4:28 AM Akhil P Oommen > >>> wrote: > > On 2/18/2021 2:05 AM, Jonathan Marek wrote: > > On 2/17/21 3:18 PM, Rob Clark wrote: > >> On Wed, Feb 17, 2021 at 11:08 AM Jordan Crouse > >> wrote: > >>> > >>> On Wed, Feb 17, 2021 at 07:14:16PM +0530, Akhil P Oommen wrote: > On 2/17/2021 8:36 AM, Rob Clark wrote: > > On Tue, Feb 16, 2021 at 12:10 PM Jonathan Marek > > wrote: > >> > >> Ignore nvmem_cell_get() EOPNOTSUPP error in the same way as a > >> ENOENT error, > >> to fix the case where the kernel was compiled without CONFIG_NVMEM. > >> > >> Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 gpu") > >> Signed-off-by: Jonathan Marek > >> --- > >> drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 +++--- > >> 1 file changed, 3 insertions(+), 3 deletions(-) > >> > >> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > >> b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > >> index ba8e9d3cf0fe..7fe5d97606aa 100644 > >> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > >> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > >> @@ -1356,10 +1356,10 @@ static int a6xx_set_supported_hw(struct > >> device *dev, struct a6xx_gpu *a6xx_gpu, > >> > >>cell = nvmem_cell_get(dev, "speed_bin"); > >>/* > >> -* -ENOENT means that the platform doesn't support > >> speedbin which is > >> -* fine > >> +* -ENOENT means no speed bin in device tree, > >> +* -EOPNOTSUPP means kernel was built without CONFIG_NVMEM > > > > very minor nit, it would be nice to at least preserve the gist of > > the > > "which is fine" (ie. some variation of "this is an optional thing > > and > > things won't catch fire without it" ;-)) > > > > (which is, I believe, is true, hopefully Akhil could confirm.. if > > not > > we should have a harder dependency on CONFIG_NVMEM..) > IIRC, if the gpu opp table in the DT uses the 'opp-supported-hw' > property, > we will see some error during boot up if we don't call > dev_pm_opp_set_supported_hw(). So calling "nvmem_cell_get(dev, > "speed_bin")" > is a way to test this. > > If there is no other harm, we can put a hard dependency on > CONFIG_NVMEM. > >>> > >>> I'm not sure if we want to go this far given the squishiness about > >>> module > >>> dependencies. As far as I know we are the only driver that uses this > >>> seriously > >>> on QCOM SoCs and this is only needed for certain targets. I don't > >>> know if we > >>> want to force every target to build NVMEM and QFPROM on our behalf. > >>> But maybe > >>> I'm just saying that because Kconfig dependencies tend to break my > >>> brain (and > >>> then Arnd has to send a patch to fix it). > >>> > >> > >> Hmm, good point.. looks like CONFIG_NVMEM itself doesn't have any > >> other dependencies, so I suppose it wouldn't be the end of the world > >> to select that.. but I guess we don't want to require QFPROM > >> > >> I guess at the end of the day, what is the failure mode if you have a > >> speed-bin device, but your kernel config misses QFPROM (and possibly > >> NVMEM)? If the result is just not having the highest clk rate(s) > > Atleast on sc7180's gpu, using an unsupported FMAX breaks gmu. It won't > be very obvious what went wrong when this happens! > >>> > >>> Ugg, ok.. > >>> > >>> I suppose we could select NVMEM, but not QFPROM, and then the case > >>> where QFPROM is not enabled on platforms that have the speed-bin field > >>> in DT will fail gracefully and all other platforms would continue on > >>> happily? > >>> > >>> BR, > >>> -R > >> > >> Sounds good to me. > >> > > > > You probably should do a quick test with NVMEM enabled but QFPROM > > disabled to confirm my theory, but I *think* that should work > > > > BR, > > -R > > > > I tried it on an sc7180 device. The suggested combo (CONFIG_NVMEM + no > CONFIG_QCOM_QFPROM) makes the gpu probe fail with error "failed to read > speed-bin. Some OPPs may not be supported by hardware". This is good > enough clue for the developer that he should fix the broken speedbin > detection. > Ok, great.. then sounds like selecting NVMEM is a good approach BR, -R
Re: [PATCH] drm/msm/a6xx: fix for kernels without CONFIG_NVMEM
On 2/19/2021 9:30 PM, Rob Clark wrote: On Fri, Feb 19, 2021 at 2:44 AM Akhil P Oommen wrote: On 2/18/2021 9:41 PM, Rob Clark wrote: On Thu, Feb 18, 2021 at 4:28 AM Akhil P Oommen wrote: On 2/18/2021 2:05 AM, Jonathan Marek wrote: On 2/17/21 3:18 PM, Rob Clark wrote: On Wed, Feb 17, 2021 at 11:08 AM Jordan Crouse wrote: On Wed, Feb 17, 2021 at 07:14:16PM +0530, Akhil P Oommen wrote: On 2/17/2021 8:36 AM, Rob Clark wrote: On Tue, Feb 16, 2021 at 12:10 PM Jonathan Marek wrote: Ignore nvmem_cell_get() EOPNOTSUPP error in the same way as a ENOENT error, to fix the case where the kernel was compiled without CONFIG_NVMEM. Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 gpu") Signed-off-by: Jonathan Marek --- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index ba8e9d3cf0fe..7fe5d97606aa 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -1356,10 +1356,10 @@ static int a6xx_set_supported_hw(struct device *dev, struct a6xx_gpu *a6xx_gpu, cell = nvmem_cell_get(dev, "speed_bin"); /* -* -ENOENT means that the platform doesn't support speedbin which is -* fine +* -ENOENT means no speed bin in device tree, +* -EOPNOTSUPP means kernel was built without CONFIG_NVMEM very minor nit, it would be nice to at least preserve the gist of the "which is fine" (ie. some variation of "this is an optional thing and things won't catch fire without it" ;-)) (which is, I believe, is true, hopefully Akhil could confirm.. if not we should have a harder dependency on CONFIG_NVMEM..) IIRC, if the gpu opp table in the DT uses the 'opp-supported-hw' property, we will see some error during boot up if we don't call dev_pm_opp_set_supported_hw(). So calling "nvmem_cell_get(dev, "speed_bin")" is a way to test this. If there is no other harm, we can put a hard dependency on CONFIG_NVMEM. I'm not sure if we want to go this far given the squishiness about module dependencies. As far as I know we are the only driver that uses this seriously on QCOM SoCs and this is only needed for certain targets. I don't know if we want to force every target to build NVMEM and QFPROM on our behalf. But maybe I'm just saying that because Kconfig dependencies tend to break my brain (and then Arnd has to send a patch to fix it). Hmm, good point.. looks like CONFIG_NVMEM itself doesn't have any other dependencies, so I suppose it wouldn't be the end of the world to select that.. but I guess we don't want to require QFPROM I guess at the end of the day, what is the failure mode if you have a speed-bin device, but your kernel config misses QFPROM (and possibly NVMEM)? If the result is just not having the highest clk rate(s) Atleast on sc7180's gpu, using an unsupported FMAX breaks gmu. It won't be very obvious what went wrong when this happens! Ugg, ok.. I suppose we could select NVMEM, but not QFPROM, and then the case where QFPROM is not enabled on platforms that have the speed-bin field in DT will fail gracefully and all other platforms would continue on happily? BR, -R Sounds good to me. You probably should do a quick test with NVMEM enabled but QFPROM disabled to confirm my theory, but I *think* that should work BR, -R I tried it on an sc7180 device. The suggested combo (CONFIG_NVMEM + no CONFIG_QCOM_QFPROM) makes the gpu probe fail with error "failed to read speed-bin. Some OPPs may not be supported by hardware". This is good enough clue for the developer that he should fix the broken speedbin detection. -Akhil.
Re: [PATCH] drm/msm/a6xx: fix for kernels without CONFIG_NVMEM
On Fri, Feb 19, 2021 at 2:44 AM Akhil P Oommen wrote: > > On 2/18/2021 9:41 PM, Rob Clark wrote: > > On Thu, Feb 18, 2021 at 4:28 AM Akhil P Oommen > > wrote: > >> > >> On 2/18/2021 2:05 AM, Jonathan Marek wrote: > >>> On 2/17/21 3:18 PM, Rob Clark wrote: > On Wed, Feb 17, 2021 at 11:08 AM Jordan Crouse > wrote: > > > > On Wed, Feb 17, 2021 at 07:14:16PM +0530, Akhil P Oommen wrote: > >> On 2/17/2021 8:36 AM, Rob Clark wrote: > >>> On Tue, Feb 16, 2021 at 12:10 PM Jonathan Marek > >>> wrote: > > Ignore nvmem_cell_get() EOPNOTSUPP error in the same way as a > ENOENT error, > to fix the case where the kernel was compiled without CONFIG_NVMEM. > > Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 gpu") > Signed-off-by: Jonathan Marek > --- > drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > index ba8e9d3cf0fe..7fe5d97606aa 100644 > --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > @@ -1356,10 +1356,10 @@ static int a6xx_set_supported_hw(struct > device *dev, struct a6xx_gpu *a6xx_gpu, > > cell = nvmem_cell_get(dev, "speed_bin"); > /* > -* -ENOENT means that the platform doesn't support > speedbin which is > -* fine > +* -ENOENT means no speed bin in device tree, > +* -EOPNOTSUPP means kernel was built without CONFIG_NVMEM > >>> > >>> very minor nit, it would be nice to at least preserve the gist of the > >>> "which is fine" (ie. some variation of "this is an optional thing and > >>> things won't catch fire without it" ;-)) > >>> > >>> (which is, I believe, is true, hopefully Akhil could confirm.. if not > >>> we should have a harder dependency on CONFIG_NVMEM..) > >> IIRC, if the gpu opp table in the DT uses the 'opp-supported-hw' > >> property, > >> we will see some error during boot up if we don't call > >> dev_pm_opp_set_supported_hw(). So calling "nvmem_cell_get(dev, > >> "speed_bin")" > >> is a way to test this. > >> > >> If there is no other harm, we can put a hard dependency on > >> CONFIG_NVMEM. > > > > I'm not sure if we want to go this far given the squishiness about > > module > > dependencies. As far as I know we are the only driver that uses this > > seriously > > on QCOM SoCs and this is only needed for certain targets. I don't > > know if we > > want to force every target to build NVMEM and QFPROM on our behalf. > > But maybe > > I'm just saying that because Kconfig dependencies tend to break my > > brain (and > > then Arnd has to send a patch to fix it). > > > > Hmm, good point.. looks like CONFIG_NVMEM itself doesn't have any > other dependencies, so I suppose it wouldn't be the end of the world > to select that.. but I guess we don't want to require QFPROM > > I guess at the end of the day, what is the failure mode if you have a > speed-bin device, but your kernel config misses QFPROM (and possibly > NVMEM)? If the result is just not having the highest clk rate(s) > >> > >> Atleast on sc7180's gpu, using an unsupported FMAX breaks gmu. It won't > >> be very obvious what went wrong when this happens! > > > > Ugg, ok.. > > > > I suppose we could select NVMEM, but not QFPROM, and then the case > > where QFPROM is not enabled on platforms that have the speed-bin field > > in DT will fail gracefully and all other platforms would continue on > > happily? > > > > BR, > > -R > > Sounds good to me. > You probably should do a quick test with NVMEM enabled but QFPROM disabled to confirm my theory, but I *think* that should work BR, -R
Re: [PATCH] drm/msm/a6xx: fix for kernels without CONFIG_NVMEM
On 2/18/2021 9:41 PM, Rob Clark wrote: On Thu, Feb 18, 2021 at 4:28 AM Akhil P Oommen wrote: On 2/18/2021 2:05 AM, Jonathan Marek wrote: On 2/17/21 3:18 PM, Rob Clark wrote: On Wed, Feb 17, 2021 at 11:08 AM Jordan Crouse wrote: On Wed, Feb 17, 2021 at 07:14:16PM +0530, Akhil P Oommen wrote: On 2/17/2021 8:36 AM, Rob Clark wrote: On Tue, Feb 16, 2021 at 12:10 PM Jonathan Marek wrote: Ignore nvmem_cell_get() EOPNOTSUPP error in the same way as a ENOENT error, to fix the case where the kernel was compiled without CONFIG_NVMEM. Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 gpu") Signed-off-by: Jonathan Marek --- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index ba8e9d3cf0fe..7fe5d97606aa 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -1356,10 +1356,10 @@ static int a6xx_set_supported_hw(struct device *dev, struct a6xx_gpu *a6xx_gpu, cell = nvmem_cell_get(dev, "speed_bin"); /* -* -ENOENT means that the platform doesn't support speedbin which is -* fine +* -ENOENT means no speed bin in device tree, +* -EOPNOTSUPP means kernel was built without CONFIG_NVMEM very minor nit, it would be nice to at least preserve the gist of the "which is fine" (ie. some variation of "this is an optional thing and things won't catch fire without it" ;-)) (which is, I believe, is true, hopefully Akhil could confirm.. if not we should have a harder dependency on CONFIG_NVMEM..) IIRC, if the gpu opp table in the DT uses the 'opp-supported-hw' property, we will see some error during boot up if we don't call dev_pm_opp_set_supported_hw(). So calling "nvmem_cell_get(dev, "speed_bin")" is a way to test this. If there is no other harm, we can put a hard dependency on CONFIG_NVMEM. I'm not sure if we want to go this far given the squishiness about module dependencies. As far as I know we are the only driver that uses this seriously on QCOM SoCs and this is only needed for certain targets. I don't know if we want to force every target to build NVMEM and QFPROM on our behalf. But maybe I'm just saying that because Kconfig dependencies tend to break my brain (and then Arnd has to send a patch to fix it). Hmm, good point.. looks like CONFIG_NVMEM itself doesn't have any other dependencies, so I suppose it wouldn't be the end of the world to select that.. but I guess we don't want to require QFPROM I guess at the end of the day, what is the failure mode if you have a speed-bin device, but your kernel config misses QFPROM (and possibly NVMEM)? If the result is just not having the highest clk rate(s) Atleast on sc7180's gpu, using an unsupported FMAX breaks gmu. It won't be very obvious what went wrong when this happens! Ugg, ok.. I suppose we could select NVMEM, but not QFPROM, and then the case where QFPROM is not enabled on platforms that have the speed-bin field in DT will fail gracefully and all other platforms would continue on happily? BR, -R Sounds good to me. -Akhil. available, that isn't the end of the world. But if it makes things not-work, that is sub-optimal. Generally, especially on ARM, kconfig seems to be way harder than it should be to build a kernel that works, if we could somehow not add to that problem (for both people with a6xx and older gens) that would be nice ;-) There is a "imply" kconfig option which solves exactly this problem. (you would "imply NVMEM" instead of "select NVMEM". then it would be possible to disable NVMEM but it would get enabled by default) BR, -R ___ dri-devel mailing list dri-de...@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH] drm/msm/a6xx: fix for kernels without CONFIG_NVMEM
On Thu, Feb 18, 2021 at 4:28 AM Akhil P Oommen wrote: > > On 2/18/2021 2:05 AM, Jonathan Marek wrote: > > On 2/17/21 3:18 PM, Rob Clark wrote: > >> On Wed, Feb 17, 2021 at 11:08 AM Jordan Crouse > >> wrote: > >>> > >>> On Wed, Feb 17, 2021 at 07:14:16PM +0530, Akhil P Oommen wrote: > On 2/17/2021 8:36 AM, Rob Clark wrote: > > On Tue, Feb 16, 2021 at 12:10 PM Jonathan Marek > > wrote: > >> > >> Ignore nvmem_cell_get() EOPNOTSUPP error in the same way as a > >> ENOENT error, > >> to fix the case where the kernel was compiled without CONFIG_NVMEM. > >> > >> Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 gpu") > >> Signed-off-by: Jonathan Marek > >> --- > >> drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 +++--- > >> 1 file changed, 3 insertions(+), 3 deletions(-) > >> > >> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > >> b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > >> index ba8e9d3cf0fe..7fe5d97606aa 100644 > >> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > >> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > >> @@ -1356,10 +1356,10 @@ static int a6xx_set_supported_hw(struct > >> device *dev, struct a6xx_gpu *a6xx_gpu, > >> > >> cell = nvmem_cell_get(dev, "speed_bin"); > >> /* > >> -* -ENOENT means that the platform doesn't support > >> speedbin which is > >> -* fine > >> +* -ENOENT means no speed bin in device tree, > >> +* -EOPNOTSUPP means kernel was built without CONFIG_NVMEM > > > > very minor nit, it would be nice to at least preserve the gist of the > > "which is fine" (ie. some variation of "this is an optional thing and > > things won't catch fire without it" ;-)) > > > > (which is, I believe, is true, hopefully Akhil could confirm.. if not > > we should have a harder dependency on CONFIG_NVMEM..) > IIRC, if the gpu opp table in the DT uses the 'opp-supported-hw' > property, > we will see some error during boot up if we don't call > dev_pm_opp_set_supported_hw(). So calling "nvmem_cell_get(dev, > "speed_bin")" > is a way to test this. > > If there is no other harm, we can put a hard dependency on > CONFIG_NVMEM. > >>> > >>> I'm not sure if we want to go this far given the squishiness about > >>> module > >>> dependencies. As far as I know we are the only driver that uses this > >>> seriously > >>> on QCOM SoCs and this is only needed for certain targets. I don't > >>> know if we > >>> want to force every target to build NVMEM and QFPROM on our behalf. > >>> But maybe > >>> I'm just saying that because Kconfig dependencies tend to break my > >>> brain (and > >>> then Arnd has to send a patch to fix it). > >>> > >> > >> Hmm, good point.. looks like CONFIG_NVMEM itself doesn't have any > >> other dependencies, so I suppose it wouldn't be the end of the world > >> to select that.. but I guess we don't want to require QFPROM > >> > >> I guess at the end of the day, what is the failure mode if you have a > >> speed-bin device, but your kernel config misses QFPROM (and possibly > >> NVMEM)? If the result is just not having the highest clk rate(s) > > Atleast on sc7180's gpu, using an unsupported FMAX breaks gmu. It won't > be very obvious what went wrong when this happens! Ugg, ok.. I suppose we could select NVMEM, but not QFPROM, and then the case where QFPROM is not enabled on platforms that have the speed-bin field in DT will fail gracefully and all other platforms would continue on happily? BR, -R > > >> available, that isn't the end of the world. But if it makes things > >> not-work, that is sub-optimal. Generally, especially on ARM, kconfig > >> seems to be way harder than it should be to build a kernel that works, > >> if we could somehow not add to that problem (for both people with a6xx > >> and older gens) that would be nice ;-) > >> > > > > There is a "imply" kconfig option which solves exactly this problem. > > (you would "imply NVMEM" instead of "select NVMEM". then it would be > > possible to disable NVMEM but it would get enabled by default) > > > >> BR, > >> -R > >> > > ___ > > dri-devel mailing list > > dri-de...@lists.freedesktop.org > > https://lists.freedesktop.org/mailman/listinfo/dri-devel >
Re: [PATCH] drm/msm/a6xx: fix for kernels without CONFIG_NVMEM
On 2/18/2021 2:05 AM, Jonathan Marek wrote: On 2/17/21 3:18 PM, Rob Clark wrote: On Wed, Feb 17, 2021 at 11:08 AM Jordan Crouse wrote: On Wed, Feb 17, 2021 at 07:14:16PM +0530, Akhil P Oommen wrote: On 2/17/2021 8:36 AM, Rob Clark wrote: On Tue, Feb 16, 2021 at 12:10 PM Jonathan Marek wrote: Ignore nvmem_cell_get() EOPNOTSUPP error in the same way as a ENOENT error, to fix the case where the kernel was compiled without CONFIG_NVMEM. Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 gpu") Signed-off-by: Jonathan Marek --- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index ba8e9d3cf0fe..7fe5d97606aa 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -1356,10 +1356,10 @@ static int a6xx_set_supported_hw(struct device *dev, struct a6xx_gpu *a6xx_gpu, cell = nvmem_cell_get(dev, "speed_bin"); /* - * -ENOENT means that the platform doesn't support speedbin which is - * fine + * -ENOENT means no speed bin in device tree, + * -EOPNOTSUPP means kernel was built without CONFIG_NVMEM very minor nit, it would be nice to at least preserve the gist of the "which is fine" (ie. some variation of "this is an optional thing and things won't catch fire without it" ;-)) (which is, I believe, is true, hopefully Akhil could confirm.. if not we should have a harder dependency on CONFIG_NVMEM..) IIRC, if the gpu opp table in the DT uses the 'opp-supported-hw' property, we will see some error during boot up if we don't call dev_pm_opp_set_supported_hw(). So calling "nvmem_cell_get(dev, "speed_bin")" is a way to test this. If there is no other harm, we can put a hard dependency on CONFIG_NVMEM. I'm not sure if we want to go this far given the squishiness about module dependencies. As far as I know we are the only driver that uses this seriously on QCOM SoCs and this is only needed for certain targets. I don't know if we want to force every target to build NVMEM and QFPROM on our behalf. But maybe I'm just saying that because Kconfig dependencies tend to break my brain (and then Arnd has to send a patch to fix it). Hmm, good point.. looks like CONFIG_NVMEM itself doesn't have any other dependencies, so I suppose it wouldn't be the end of the world to select that.. but I guess we don't want to require QFPROM I guess at the end of the day, what is the failure mode if you have a speed-bin device, but your kernel config misses QFPROM (and possibly NVMEM)? If the result is just not having the highest clk rate(s) Atleast on sc7180's gpu, using an unsupported FMAX breaks gmu. It won't be very obvious what went wrong when this happens! -Akhil. available, that isn't the end of the world. But if it makes things not-work, that is sub-optimal. Generally, especially on ARM, kconfig seems to be way harder than it should be to build a kernel that works, if we could somehow not add to that problem (for both people with a6xx and older gens) that would be nice ;-) There is a "imply" kconfig option which solves exactly this problem. (you would "imply NVMEM" instead of "select NVMEM". then it would be possible to disable NVMEM but it would get enabled by default) BR, -R ___ dri-devel mailing list dri-de...@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH] drm/msm/a6xx: fix for kernels without CONFIG_NVMEM
On 2/17/21 3:18 PM, Rob Clark wrote: On Wed, Feb 17, 2021 at 11:08 AM Jordan Crouse wrote: On Wed, Feb 17, 2021 at 07:14:16PM +0530, Akhil P Oommen wrote: On 2/17/2021 8:36 AM, Rob Clark wrote: On Tue, Feb 16, 2021 at 12:10 PM Jonathan Marek wrote: Ignore nvmem_cell_get() EOPNOTSUPP error in the same way as a ENOENT error, to fix the case where the kernel was compiled without CONFIG_NVMEM. Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 gpu") Signed-off-by: Jonathan Marek --- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index ba8e9d3cf0fe..7fe5d97606aa 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -1356,10 +1356,10 @@ static int a6xx_set_supported_hw(struct device *dev, struct a6xx_gpu *a6xx_gpu, cell = nvmem_cell_get(dev, "speed_bin"); /* -* -ENOENT means that the platform doesn't support speedbin which is -* fine +* -ENOENT means no speed bin in device tree, +* -EOPNOTSUPP means kernel was built without CONFIG_NVMEM very minor nit, it would be nice to at least preserve the gist of the "which is fine" (ie. some variation of "this is an optional thing and things won't catch fire without it" ;-)) (which is, I believe, is true, hopefully Akhil could confirm.. if not we should have a harder dependency on CONFIG_NVMEM..) IIRC, if the gpu opp table in the DT uses the 'opp-supported-hw' property, we will see some error during boot up if we don't call dev_pm_opp_set_supported_hw(). So calling "nvmem_cell_get(dev, "speed_bin")" is a way to test this. If there is no other harm, we can put a hard dependency on CONFIG_NVMEM. I'm not sure if we want to go this far given the squishiness about module dependencies. As far as I know we are the only driver that uses this seriously on QCOM SoCs and this is only needed for certain targets. I don't know if we want to force every target to build NVMEM and QFPROM on our behalf. But maybe I'm just saying that because Kconfig dependencies tend to break my brain (and then Arnd has to send a patch to fix it). Hmm, good point.. looks like CONFIG_NVMEM itself doesn't have any other dependencies, so I suppose it wouldn't be the end of the world to select that.. but I guess we don't want to require QFPROM I guess at the end of the day, what is the failure mode if you have a speed-bin device, but your kernel config misses QFPROM (and possibly NVMEM)? If the result is just not having the highest clk rate(s) available, that isn't the end of the world. But if it makes things not-work, that is sub-optimal. Generally, especially on ARM, kconfig seems to be way harder than it should be to build a kernel that works, if we could somehow not add to that problem (for both people with a6xx and older gens) that would be nice ;-) There is a "imply" kconfig option which solves exactly this problem. (you would "imply NVMEM" instead of "select NVMEM". then it would be possible to disable NVMEM but it would get enabled by default) BR, -R
Re: [PATCH] drm/msm/a6xx: fix for kernels without CONFIG_NVMEM
On Wed, Feb 17, 2021 at 11:08 AM Jordan Crouse wrote: > > On Wed, Feb 17, 2021 at 07:14:16PM +0530, Akhil P Oommen wrote: > > On 2/17/2021 8:36 AM, Rob Clark wrote: > > >On Tue, Feb 16, 2021 at 12:10 PM Jonathan Marek wrote: > > >> > > >>Ignore nvmem_cell_get() EOPNOTSUPP error in the same way as a ENOENT > > >>error, > > >>to fix the case where the kernel was compiled without CONFIG_NVMEM. > > >> > > >>Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 gpu") > > >>Signed-off-by: Jonathan Marek > > >>--- > > >> drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 +++--- > > >> 1 file changed, 3 insertions(+), 3 deletions(-) > > >> > > >>diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > > >>b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > > >>index ba8e9d3cf0fe..7fe5d97606aa 100644 > > >>--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > > >>+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > > >>@@ -1356,10 +1356,10 @@ static int a6xx_set_supported_hw(struct device > > >>*dev, struct a6xx_gpu *a6xx_gpu, > > >> > > >> cell = nvmem_cell_get(dev, "speed_bin"); > > >> /* > > >>-* -ENOENT means that the platform doesn't support speedbin which > > >>is > > >>-* fine > > >>+* -ENOENT means no speed bin in device tree, > > >>+* -EOPNOTSUPP means kernel was built without CONFIG_NVMEM > > > > > >very minor nit, it would be nice to at least preserve the gist of the > > >"which is fine" (ie. some variation of "this is an optional thing and > > >things won't catch fire without it" ;-)) > > > > > >(which is, I believe, is true, hopefully Akhil could confirm.. if not > > >we should have a harder dependency on CONFIG_NVMEM..) > > IIRC, if the gpu opp table in the DT uses the 'opp-supported-hw' property, > > we will see some error during boot up if we don't call > > dev_pm_opp_set_supported_hw(). So calling "nvmem_cell_get(dev, "speed_bin")" > > is a way to test this. > > > > If there is no other harm, we can put a hard dependency on CONFIG_NVMEM. > > I'm not sure if we want to go this far given the squishiness about module > dependencies. As far as I know we are the only driver that uses this seriously > on QCOM SoCs and this is only needed for certain targets. I don't know if we > want to force every target to build NVMEM and QFPROM on our behalf. But maybe > I'm just saying that because Kconfig dependencies tend to break my brain (and > then Arnd has to send a patch to fix it). > Hmm, good point.. looks like CONFIG_NVMEM itself doesn't have any other dependencies, so I suppose it wouldn't be the end of the world to select that.. but I guess we don't want to require QFPROM I guess at the end of the day, what is the failure mode if you have a speed-bin device, but your kernel config misses QFPROM (and possibly NVMEM)? If the result is just not having the highest clk rate(s) available, that isn't the end of the world. But if it makes things not-work, that is sub-optimal. Generally, especially on ARM, kconfig seems to be way harder than it should be to build a kernel that works, if we could somehow not add to that problem (for both people with a6xx and older gens) that would be nice ;-) BR, -R
Re: [PATCH] drm/msm/a6xx: fix for kernels without CONFIG_NVMEM
On Wed, Feb 17, 2021 at 07:14:16PM +0530, Akhil P Oommen wrote: > On 2/17/2021 8:36 AM, Rob Clark wrote: > >On Tue, Feb 16, 2021 at 12:10 PM Jonathan Marek wrote: > >> > >>Ignore nvmem_cell_get() EOPNOTSUPP error in the same way as a ENOENT error, > >>to fix the case where the kernel was compiled without CONFIG_NVMEM. > >> > >>Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 gpu") > >>Signed-off-by: Jonathan Marek > >>--- > >> drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 +++--- > >> 1 file changed, 3 insertions(+), 3 deletions(-) > >> > >>diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > >>b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > >>index ba8e9d3cf0fe..7fe5d97606aa 100644 > >>--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > >>+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > >>@@ -1356,10 +1356,10 @@ static int a6xx_set_supported_hw(struct device > >>*dev, struct a6xx_gpu *a6xx_gpu, > >> > >> cell = nvmem_cell_get(dev, "speed_bin"); > >> /* > >>-* -ENOENT means that the platform doesn't support speedbin which is > >>-* fine > >>+* -ENOENT means no speed bin in device tree, > >>+* -EOPNOTSUPP means kernel was built without CONFIG_NVMEM > > > >very minor nit, it would be nice to at least preserve the gist of the > >"which is fine" (ie. some variation of "this is an optional thing and > >things won't catch fire without it" ;-)) > > > >(which is, I believe, is true, hopefully Akhil could confirm.. if not > >we should have a harder dependency on CONFIG_NVMEM..) > IIRC, if the gpu opp table in the DT uses the 'opp-supported-hw' property, > we will see some error during boot up if we don't call > dev_pm_opp_set_supported_hw(). So calling "nvmem_cell_get(dev, "speed_bin")" > is a way to test this. > > If there is no other harm, we can put a hard dependency on CONFIG_NVMEM. I'm not sure if we want to go this far given the squishiness about module dependencies. As far as I know we are the only driver that uses this seriously on QCOM SoCs and this is only needed for certain targets. I don't know if we want to force every target to build NVMEM and QFPROM on our behalf. But maybe I'm just saying that because Kconfig dependencies tend to break my brain (and then Arnd has to send a patch to fix it). Jordan > -Akhil. > > > >BR, > >-R > > > >> */ > >>- if (PTR_ERR(cell) == -ENOENT) > >>+ if (PTR_ERR(cell) == -ENOENT || PTR_ERR(cell) == -EOPNOTSUPP) > >> return 0; > >> else if (IS_ERR(cell)) { > >> DRM_DEV_ERROR(dev, > >>-- > >>2.26.1 > >> > -- The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
Re: [PATCH] drm/msm/a6xx: fix for kernels without CONFIG_NVMEM
On 2/17/2021 8:36 AM, Rob Clark wrote: On Tue, Feb 16, 2021 at 12:10 PM Jonathan Marek wrote: Ignore nvmem_cell_get() EOPNOTSUPP error in the same way as a ENOENT error, to fix the case where the kernel was compiled without CONFIG_NVMEM. Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 gpu") Signed-off-by: Jonathan Marek --- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index ba8e9d3cf0fe..7fe5d97606aa 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -1356,10 +1356,10 @@ static int a6xx_set_supported_hw(struct device *dev, struct a6xx_gpu *a6xx_gpu, cell = nvmem_cell_get(dev, "speed_bin"); /* -* -ENOENT means that the platform doesn't support speedbin which is -* fine +* -ENOENT means no speed bin in device tree, +* -EOPNOTSUPP means kernel was built without CONFIG_NVMEM very minor nit, it would be nice to at least preserve the gist of the "which is fine" (ie. some variation of "this is an optional thing and things won't catch fire without it" ;-)) (which is, I believe, is true, hopefully Akhil could confirm.. if not we should have a harder dependency on CONFIG_NVMEM..) IIRC, if the gpu opp table in the DT uses the 'opp-supported-hw' property, we will see some error during boot up if we don't call dev_pm_opp_set_supported_hw(). So calling "nvmem_cell_get(dev, "speed_bin")" is a way to test this. If there is no other harm, we can put a hard dependency on CONFIG_NVMEM. -Akhil. BR, -R */ - if (PTR_ERR(cell) == -ENOENT) + if (PTR_ERR(cell) == -ENOENT || PTR_ERR(cell) == -EOPNOTSUPP) return 0; else if (IS_ERR(cell)) { DRM_DEV_ERROR(dev, -- 2.26.1
Re: [PATCH] drm/msm/a6xx: fix for kernels without CONFIG_NVMEM
On Tue, Feb 16, 2021 at 12:10 PM Jonathan Marek wrote: > > Ignore nvmem_cell_get() EOPNOTSUPP error in the same way as a ENOENT error, > to fix the case where the kernel was compiled without CONFIG_NVMEM. > > Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 gpu") > Signed-off-by: Jonathan Marek > --- > drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > index ba8e9d3cf0fe..7fe5d97606aa 100644 > --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > @@ -1356,10 +1356,10 @@ static int a6xx_set_supported_hw(struct device *dev, > struct a6xx_gpu *a6xx_gpu, > > cell = nvmem_cell_get(dev, "speed_bin"); > /* > -* -ENOENT means that the platform doesn't support speedbin which is > -* fine > +* -ENOENT means no speed bin in device tree, > +* -EOPNOTSUPP means kernel was built without CONFIG_NVMEM very minor nit, it would be nice to at least preserve the gist of the "which is fine" (ie. some variation of "this is an optional thing and things won't catch fire without it" ;-)) (which is, I believe, is true, hopefully Akhil could confirm.. if not we should have a harder dependency on CONFIG_NVMEM..) BR, -R > */ > - if (PTR_ERR(cell) == -ENOENT) > + if (PTR_ERR(cell) == -ENOENT || PTR_ERR(cell) == -EOPNOTSUPP) > return 0; > else if (IS_ERR(cell)) { > DRM_DEV_ERROR(dev, > -- > 2.26.1 >