Re: [PATCH V7 0/4] phy: USB and PCIe phy drivers for Qcom chipsets

2017-04-05 Thread Vivek Gautam
Hi Kishon,


On Wed, Apr 5, 2017 at 7:08 PM, Kishon Vijay Abraham I  wrote:
> Hi Vivek,
>
> On Wednesday 05 April 2017 06:02 PM, Vivek Gautam wrote:
>> This patch series adds couple of PHY drivers for Qualcomm chipsets.
>> a) qcom-qusb2 phy driver: that provides High Speed USB functionality.
>> b) qcom-qmp phy driver: that is a combo phy providing support for
>>USB3, PCIe, UFS and few other controllers.
>>
>> The patches are based on next branch of linux-phy tree.
>>
>> These patches have been tested on Dragon board db820c hardware with
>> required set of dt patches and the patches to get rpm up on msm8996.
>> Couple of other patches [1, 2] fixing DMA config for XHCI are also
>> pulled in for testing.
>> A branch based on torvald's master is available in github [3].
>
> I get a bunch of checkpatch errors/warnings when I run checkpatch with 
> --strict
> option. Those look simple enough to be fixed. Can you respin your series 
> fixing
> those?

Sure, I am on it.
Thanks for pointing out.

Regards
Vivek

>
> Thanks
> Kishon
>
>>
>> Changes since v6:
>>  - Rebased on phy/next and *not* including phy grouping series[4].
>>  - qusb2-phy: addressed Stephen's comment.
>>- Dropped pm8994_s2 corner regulator from QUSB2 phy bindings.
>>  - qmp-phy: none on functionality side.
>>
>> Changes since v5:
>>  - Addressed review comments from Bjorn:
>>- Removed instances of readl/wirtel_relaxed calls from the drivers.
>>  Instead, using simple readl/writel. Inserting a readl after a writel
>>  to ensure the write is through to the device.
>>- Replaced regulator handling with regulator_bulk_** apis. This helps
>>  in cutting down a lot of regulator handling code.
>>- Fixed minor return statements.
>>
>> Changes since v4:
>>  - Addressed comment to add child nodes for qmp phy driver. Each phy lane
>>now has a separate child node under the main qmp node.
>>  - Modified the clock and reset initialization and enable methods.
>>Different phys - pcie, usb and later ufs, have varying number of clocks
>>and resets that are mandatory. So adding provision for clocks and reset
>>lists helps in requesting all mandatory resources for individual phys
>>and handle their failure cases accordingly.
>>
>> Changes since v3:
>>  - Addressed review comments given by Rob and Stephen for qusb2 phy
>>and qmp phy bindings respectively.
>>  - Addressed review comments given by Stephen and Bjorn for qmp phy driver.
>>
>> Changes since v2:
>>  - Addressed review comments given by Rob and Stephen for bindings.
>>  - Addressed the review comments given by Stephen for the qusb2 and qmp
>>phy drivers.
>>
>> Changes since v1:
>>  - Moved device tree binding documentation to separate patches, as suggested
>>by Rob.
>>  - Addressed review comment regarding qfprom accesses by qusb2 phy driver,
>>given by Rob.
>>  - Addressed review comments from Kishon.
>>  - Addressed review comments from Srinivas for QMP phy driver.
>>  - Addressed kbuild warning.
>>
>> Please see individual patches for detailed changelogs.
>>
>> [1] https://patchwork.kernel.org/patch/9567767/
>> [2] https://patchwork.kernel.org/patch/9567779/
>> [3] https://github.com/vivekgautam1/linux/tree/linux-v4.11-rc5-qmp-phy-db820c
>> [4] https://lkml.org/lkml/2017/3/20/407
>>
>> Vivek Gautam (4):
>>   dt-bindings: phy: Add support for QUSB2 phy
>>   phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips
>>   dt-bindings: phy: Add support for QMP phy
>>   phy: qcom-qmp: new qmp phy driver for qcom-chipsets
>>
>>  .../devicetree/bindings/phy/qcom-qmp-phy.txt   |  106 ++
>>  .../devicetree/bindings/phy/qcom-qusb2-phy.txt |   43 +
>>  drivers/phy/Kconfig|   18 +
>>  drivers/phy/Makefile   |2 +
>>  drivers/phy/phy-qcom-qmp.c | 1153 
>> 
>>  drivers/phy/phy-qcom-qusb2.c   |  491 +
>>  6 files changed, 1813 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
>>  create mode 100644 Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
>>  create mode 100644 drivers/phy/phy-qcom-qmp.c
>>  create mode 100644 drivers/phy/phy-qcom-qusb2.c
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project


Re: [PATCH V7 0/4] phy: USB and PCIe phy drivers for Qcom chipsets

2017-04-05 Thread Kishon Vijay Abraham I
Hi Vivek,

On Wednesday 05 April 2017 06:02 PM, Vivek Gautam wrote:
> This patch series adds couple of PHY drivers for Qualcomm chipsets.
> a) qcom-qusb2 phy driver: that provides High Speed USB functionality.
> b) qcom-qmp phy driver: that is a combo phy providing support for
>USB3, PCIe, UFS and few other controllers.
> 
> The patches are based on next branch of linux-phy tree.
> 
> These patches have been tested on Dragon board db820c hardware with
> required set of dt patches and the patches to get rpm up on msm8996.
> Couple of other patches [1, 2] fixing DMA config for XHCI are also
> pulled in for testing.
> A branch based on torvald's master is available in github [3].

I get a bunch of checkpatch errors/warnings when I run checkpatch with --strict
option. Those look simple enough to be fixed. Can you respin your series fixing
those?

Thanks
Kishon

> 
> Changes since v6:
>  - Rebased on phy/next and *not* including phy grouping series[4].
>  - qusb2-phy: addressed Stephen's comment.
>- Dropped pm8994_s2 corner regulator from QUSB2 phy bindings.
>  - qmp-phy: none on functionality side.
>  
> Changes since v5:
>  - Addressed review comments from Bjorn:
>- Removed instances of readl/wirtel_relaxed calls from the drivers.
>  Instead, using simple readl/writel. Inserting a readl after a writel
>  to ensure the write is through to the device.
>- Replaced regulator handling with regulator_bulk_** apis. This helps
>  in cutting down a lot of regulator handling code.
>- Fixed minor return statements.
> 
> Changes since v4:
>  - Addressed comment to add child nodes for qmp phy driver. Each phy lane
>now has a separate child node under the main qmp node.
>  - Modified the clock and reset initialization and enable methods.
>Different phys - pcie, usb and later ufs, have varying number of clocks
>and resets that are mandatory. So adding provision for clocks and reset
>lists helps in requesting all mandatory resources for individual phys
>and handle their failure cases accordingly.
> 
> Changes since v3:
>  - Addressed review comments given by Rob and Stephen for qusb2 phy
>and qmp phy bindings respectively.
>  - Addressed review comments given by Stephen and Bjorn for qmp phy driver.
> 
> Changes since v2:
>  - Addressed review comments given by Rob and Stephen for bindings.
>  - Addressed the review comments given by Stephen for the qusb2 and qmp
>phy drivers.
> 
> Changes since v1:
>  - Moved device tree binding documentation to separate patches, as suggested
>by Rob.
>  - Addressed review comment regarding qfprom accesses by qusb2 phy driver,
>given by Rob.
>  - Addressed review comments from Kishon.
>  - Addressed review comments from Srinivas for QMP phy driver.
>  - Addressed kbuild warning.
> 
> Please see individual patches for detailed changelogs.
> 
> [1] https://patchwork.kernel.org/patch/9567767/
> [2] https://patchwork.kernel.org/patch/9567779/
> [3] https://github.com/vivekgautam1/linux/tree/linux-v4.11-rc5-qmp-phy-db820c
> [4] https://lkml.org/lkml/2017/3/20/407
> 
> Vivek Gautam (4):
>   dt-bindings: phy: Add support for QUSB2 phy
>   phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips
>   dt-bindings: phy: Add support for QMP phy
>   phy: qcom-qmp: new qmp phy driver for qcom-chipsets
> 
>  .../devicetree/bindings/phy/qcom-qmp-phy.txt   |  106 ++
>  .../devicetree/bindings/phy/qcom-qusb2-phy.txt |   43 +
>  drivers/phy/Kconfig|   18 +
>  drivers/phy/Makefile   |2 +
>  drivers/phy/phy-qcom-qmp.c | 1153 
> 
>  drivers/phy/phy-qcom-qusb2.c   |  491 +
>  6 files changed, 1813 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
>  create mode 100644 Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
>  create mode 100644 drivers/phy/phy-qcom-qmp.c
>  create mode 100644 drivers/phy/phy-qcom-qusb2.c
>