Re: ide problems: 2.6.22-git17 working, 2.6.23-rc1* is not
Danny ter Haar wrote: [ added linux-acpi and Len to CC ] > Quoting Gabriel C ([EMAIL PROTECTED]): >> Maybe try to : >> disable BSG ( maybe some leftover bug ) >> boot acpi=off ( that got merged kind late ) > > My first git disected kernel wouldn't boot, but with > acpi=off it would indeed boot! Now while we think is ACPI this should be easy for you to bisect. This commit http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=39804b20f62532fa05c2a8c3e2d1ae551fd0327b merged ACPI so this one should be your first bad one. Maybe Len has some idea and you don't need to bisect :) > > As did the 2.6.23-rc1-git5 kernel... > > I will bisect further to find out exactly what patch is > playing up in my particular setup. > > thanks for the tip! ;-) You are welcome :) > > Danny > Gabriel - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: ide problems: 2.6.22-git17 working, 2.6.23-rc1* is not
Quoting Gabriel C ([EMAIL PROTECTED]): > Maybe try to : > disable BSG ( maybe some leftover bug ) > boot acpi=off ( that got merged kind late ) My first git disected kernel wouldn't boot, but with acpi=off it would indeed boot! As did the 2.6.23-rc1-git5 kernel... I will bisect further to find out exactly what patch is playing up in my particular setup. thanks for the tip! ;-) Danny -- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: ide problems: 2.6.22-git17 working, 2.6.23-rc1* is not
Danny ter Haar wrote: > Quoting Bartlomiej Zolnierkiewicz ([EMAIL PROTECTED]): >> Please retry with the latest -git kernel and if the problem is still >> there install git, get kernel tree and run git-bisect. > > I ran over "make menuconfig" and did a few changes. > > http://www.dth.net/kernel/config-2.6.23-rc1-git5 > Maybe try to : disable BSG ( maybe some leftover bug ) boot acpi=off ( that got merged kind late ) > > Danny Gabriel - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: ide problems: 2.6.22-git17 working, 2.6.23-rc1* is not
Quoting Bartlomiej Zolnierkiewicz ([EMAIL PROTECTED]): > Please retry with the latest -git kernel and if the problem is still > there install git, get kernel tree and run git-bisect. I ran over "make menuconfig" and did a few changes. http://www.dth.net/kernel/config-2.6.23-rc1-git5 It boots, but freezes solid before doing any "work" as a firewall. I was able to catch boot messages with netconsole http://www.dth.net/kernel/via_output_2.6.23-rc1-git5 It didn't respond after the last line. magig sysrq etc, all nada. Will start to get acquainted with git ;-) Danny -- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: ide problems: 2.6.22-git17 working, 2.6.23-rc1* is not
Quoting Bartlomiej Zolnierkiewicz ([EMAIL PROTECTED]): > Should be harmless for now but we would like to fix it the long-term, > please send "hdparm --Istdout /dev/hda" output. I allready made that available in the same subdir: http://www.dth.net/kernel/ Output repeated here: voyage:~# hdparm -I /dev/hda /dev/hda: ATA device, with non-removable media Model Number: PQI IDE DiskOnModule Serial Number: Firmware Revision: db01.20a Standards: Likely used: 1 Configuration: hard sectored not MFM encoded head switch time > 15us fixed drive disk xfer rate > 5Mbs Logical max current cylinders 500 500 heads 16 16 sectors/track 32 32 -- bytes/track: 0 bytes/sector: 528 CHS current addressable sectors: 256000 LBAuser addressable sectors: 256000 device size with M = 1024*1024: 125 MBytes device size with M = 1000*1000: 131 MBytes Capabilities: LBA, IORDY not likely Buffer type: 0002: dual port, multi-sector Buffer size: 1.0kB bytes avail on r/w long: 4 Cannot perform double-word IO R/W multiple sector transfer: Max = 1 Current = 0 DMA: not supported PIO: pio0 pio1 pio2 voyage:~# hdparm -tT /dev/hda /dev/hda: Timing cached reads: 116 MB in 2.00 seconds = 57.92 MB/sec Timing buffered disk reads: 16 MB in 3.01 seconds = 5.32 MB/sec # hdparm --Istdout /dev/hda /dev/hda: 045a 01f4 0010 0210 0020 0003 e800 2020 2020 2020 2020 2020 2020 2020 2020 2020 2020 0002 0002 0004 6462 3031 2e32 3061 5051 4920 4944 4520 4469 736b 4f6e 4d6f 6475 6c65 2020 2020 2020 2020 2020 2020 2020 2020 2020 2020 0001 0200 0200 0001 01f4 0010 0020 e800 0003 0100 e800 0003 > No IDE changes yet after 2.6.22-git17 so something else must have broke down. darn I also tried with libata driver on the 2.6.22 series but that wouldn't work as well. I contacted Alan Cox and he made some patches/suggestions that made 2.6.22-git16 with libata work! I hope his patch will make it into mainline soon. For the dmesg output of this kernel http://www.dth.net/kernel/via_output_2.6.22-git16-libata_fix_alan_cox > Please retry with the latest -git kernel and if the problem is still > there install git, get kernel tree and run git-bisect. > > Since 2.6.22-git17 works fine the initial "good" commit would be > e51f802babc5e368c60fbfd08c6c11269c9253b0 and the initial "bad" one > f695baf2df9e0413d3521661070103711545207a (for 2.6.23-rc1). > > If you need some practical examples on using git-bisect, this one > > http://www.reactivated.net/weblog/archives/2006/01/using-git-bisect-to-find-buggy-kernel-patches/ > > is a very good one (IMO). I will certainly will read/try that. > > VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci:00:11.1 > > ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:pio, hdb:pio > > ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:pio > > Marking TSC unstable due to: possible TSC halt in C2. > > Time: acpi_pm clocksource has been installed. > > hda: PQI IDE DiskOnModule, ATA DISK drive > > hda: IRQ probe failed (0xfff2) > > This message would indicate broken IRQ routing, however it is no > longer present in the log for the kernel 2.6.23-rc1-git4 ([3]). i booted with routeirq=pci but gave the same negative result. > Interesting that the kernel 2.6.22-git17 (log [2]) doesn't use via82cxxx > IDE host driver while the kernel 2.6.23-rc1-git4 (log [3]) does...? kernel configs are also in above mentioned webdir basically copied the 2.6.22-git17 and ran a make oldconfig. Did a diff -u on those config files and there is really a lot different: [snip] -# ATA/IDE/MFM/RLL support +# Device Drivers # [snip] # # IDE chipset support/bugfixes # +# CONFIG_BLK_DEV_TRM290 is not set
Re: ide problems: 2.6.22-git17 working, 2.6.23-rc1* is not
Hi, On Friday 27 July 2007, dth wrote: > I have a via mini-itx epia 5000 motherboard as a firewall. > It has an ide device: PQI 128MB flash DOM [1] which just plugs > directly into the ide connector on the motherboard. > 2.6.22-git17 works, although it gives some warning > hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } > hda: set_drive_speed_status: error=0x04 { DriveStatusError } Should be harmless for now but we would like to fix it the long-term, please send "hdparm --Istdout /dev/hda" output. > Full dmesg output [2] > > When i compiled any 2.6.23-rc1 kernel out so far it always froze on me. > Yesterday i tried 2.6.23-rc1-git3 and i booted until: No IDE changes yet after 2.6.22-git17 so something else must have broke down. Please retry with the latest -git kernel and if the problem is still there install git, get kernel tree and run git-bisect. Since 2.6.22-git17 works fine the initial "good" commit would be e51f802babc5e368c60fbfd08c6c11269c9253b0 and the initial "bad" one f695baf2df9e0413d3521661070103711545207a (for 2.6.23-rc1). If you need some practical examples on using git-bisect, this one http://www.reactivated.net/weblog/archives/2006/01/using-git-bisect-to-find-buggy-kernel-patches/ is a very good one (IMO). > VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci:00:11.1 > ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:pio, hdb:pio > ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:pio > Marking TSC unstable due to: possible TSC halt in C2. > Time: acpi_pm clocksource has been installed. > hda: PQI IDE DiskOnModule, ATA DISK drive > hda: IRQ probe failed (0xfff2) This message would indicate broken IRQ routing, however it is no longer present in the log for the kernel 2.6.23-rc1-git4 ([3]). Interesting that the kernel 2.6.22-git17 (log [2]) doesn't use via82cxxx IDE host driver while the kernel 2.6.23-rc1-git4 (log [3]) does...? > Clocksource tsc unstable (delta = 84358771493 ns) > > So i went back to 2.6.22-git17. > This morning i saw a fresh git4 and compiled/installed that. > This kernel actually booted! (once) > I had a netconsole running to catch the lucky event [3] > > After about 2 minutes of working however, the whole machine froze. > No message at the console, not able to toggle numlock, no magic > sysrq key features: solid frozen. > After the power cycle i was not able to boot the same kernel > ever again. It was just like a timer had run out and it wouldn't > work anymore. > > I know my hardware is "ancient" and the flash thing is probably > not current. My firewall however is solar powerpowered (10 watt Neat. :) > power consumption) and it would be fun if i could run the latest/ > greatest kernels on it. With the buggy commit number obtained from git-bisect it should be fixed quite quickly. > Config files and hdparm info on the DOM in the same directory as > dmesg output. > > Any comments appriciated. > > Danny > > [1] http://www.memorydepot.com/ssd_diskonmodule.asp > [2] http://www.dth.net/kernel/via_output_2.6.22_git17 > [3] http://www.dth.net/kernel/via_output_2.6.23-rc1-git4 Thanks, Bart - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: ide problems: 2.6.22-git17 working, 2.6.23-rc1* is not
Hi, On Friday 27 July 2007, dth wrote: I have a via mini-itx epia 5000 motherboard as a firewall. It has an ide device: PQI 128MB flash DOM [1] which just plugs directly into the ide connector on the motherboard. 2.6.22-git17 works, although it gives some warning hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hda: set_drive_speed_status: error=0x04 { DriveStatusError } Should be harmless for now but we would like to fix it the long-term, please send hdparm --Istdout /dev/hda output. Full dmesg output [2] When i compiled any 2.6.23-rc1 kernel out so far it always froze on me. Yesterday i tried 2.6.23-rc1-git3 and i booted until: No IDE changes yet after 2.6.22-git17 so something else must have broke down. Please retry with the latest -git kernel and if the problem is still there install git, get kernel tree and run git-bisect. Since 2.6.22-git17 works fine the initial good commit would be e51f802babc5e368c60fbfd08c6c11269c9253b0 and the initial bad one f695baf2df9e0413d3521661070103711545207a (for 2.6.23-rc1). If you need some practical examples on using git-bisect, this one http://www.reactivated.net/weblog/archives/2006/01/using-git-bisect-to-find-buggy-kernel-patches/ is a very good one (IMO). VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci:00:11.1 ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:pio Marking TSC unstable due to: possible TSC halt in C2. Time: acpi_pm clocksource has been installed. hda: PQI IDE DiskOnModule, ATA DISK drive hda: IRQ probe failed (0xfff2) This message would indicate broken IRQ routing, however it is no longer present in the log for the kernel 2.6.23-rc1-git4 ([3]). Interesting that the kernel 2.6.22-git17 (log [2]) doesn't use via82cxxx IDE host driver while the kernel 2.6.23-rc1-git4 (log [3]) does...? Clocksource tsc unstable (delta = 84358771493 ns) So i went back to 2.6.22-git17. This morning i saw a fresh git4 and compiled/installed that. This kernel actually booted! (once) I had a netconsole running to catch the lucky event [3] After about 2 minutes of working however, the whole machine froze. No message at the console, not able to toggle numlock, no magic sysrq key features: solid frozen. After the power cycle i was not able to boot the same kernel ever again. It was just like a timer had run out and it wouldn't work anymore. I know my hardware is ancient and the flash thing is probably not current. My firewall however is solar powerpowered (10 watt Neat. :) power consumption) and it would be fun if i could run the latest/ greatest kernels on it. With the buggy commit number obtained from git-bisect it should be fixed quite quickly. Config files and hdparm info on the DOM in the same directory as dmesg output. Any comments appriciated. Danny [1] http://www.memorydepot.com/ssd_diskonmodule.asp [2] http://www.dth.net/kernel/via_output_2.6.22_git17 [3] http://www.dth.net/kernel/via_output_2.6.23-rc1-git4 Thanks, Bart - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: ide problems: 2.6.22-git17 working, 2.6.23-rc1* is not
Quoting Bartlomiej Zolnierkiewicz ([EMAIL PROTECTED]): Should be harmless for now but we would like to fix it the long-term, please send hdparm --Istdout /dev/hda output. I allready made that available in the same subdir: http://www.dth.net/kernel/ Output repeated here: voyage:~# hdparm -I /dev/hda /dev/hda: ATA device, with non-removable media Model Number: PQI IDE DiskOnModule Serial Number: Firmware Revision: db01.20a Standards: Likely used: 1 Configuration: hard sectored not MFM encoded head switch time 15us fixed drive disk xfer rate 5Mbs Logical max current cylinders 500 500 heads 16 16 sectors/track 32 32 -- bytes/track: 0 bytes/sector: 528 CHS current addressable sectors: 256000 LBAuser addressable sectors: 256000 device size with M = 1024*1024: 125 MBytes device size with M = 1000*1000: 131 MBytes Capabilities: LBA, IORDY not likely Buffer type: 0002: dual port, multi-sector Buffer size: 1.0kB bytes avail on r/w long: 4 Cannot perform double-word IO R/W multiple sector transfer: Max = 1 Current = 0 DMA: not supported PIO: pio0 pio1 pio2 voyage:~# hdparm -tT /dev/hda /dev/hda: Timing cached reads: 116 MB in 2.00 seconds = 57.92 MB/sec Timing buffered disk reads: 16 MB in 3.01 seconds = 5.32 MB/sec # hdparm --Istdout /dev/hda /dev/hda: 045a 01f4 0010 0210 0020 0003 e800 2020 2020 2020 2020 2020 2020 2020 2020 2020 2020 0002 0002 0004 6462 3031 2e32 3061 5051 4920 4944 4520 4469 736b 4f6e 4d6f 6475 6c65 2020 2020 2020 2020 2020 2020 2020 2020 2020 2020 0001 0200 0200 0001 01f4 0010 0020 e800 0003 0100 e800 0003 No IDE changes yet after 2.6.22-git17 so something else must have broke down. darn I also tried with libata driver on the 2.6.22 series but that wouldn't work as well. I contacted Alan Cox and he made some patches/suggestions that made 2.6.22-git16 with libata work! I hope his patch will make it into mainline soon. For the dmesg output of this kernel http://www.dth.net/kernel/via_output_2.6.22-git16-libata_fix_alan_cox Please retry with the latest -git kernel and if the problem is still there install git, get kernel tree and run git-bisect. Since 2.6.22-git17 works fine the initial good commit would be e51f802babc5e368c60fbfd08c6c11269c9253b0 and the initial bad one f695baf2df9e0413d3521661070103711545207a (for 2.6.23-rc1). If you need some practical examples on using git-bisect, this one http://www.reactivated.net/weblog/archives/2006/01/using-git-bisect-to-find-buggy-kernel-patches/ is a very good one (IMO). I will certainly will read/try that. VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci:00:11.1 ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:pio Marking TSC unstable due to: possible TSC halt in C2. Time: acpi_pm clocksource has been installed. hda: PQI IDE DiskOnModule, ATA DISK drive hda: IRQ probe failed (0xfff2) This message would indicate broken IRQ routing, however it is no longer present in the log for the kernel 2.6.23-rc1-git4 ([3]). i booted with routeirq=pci but gave the same negative result. Interesting that the kernel 2.6.22-git17 (log [2]) doesn't use via82cxxx IDE host driver while the kernel 2.6.23-rc1-git4 (log [3]) does...? kernel configs are also in above mentioned webdir basically copied the 2.6.22-git17 and ran a make oldconfig. Did a diff -u on those config files and there is really a lot different: [snip] -# ATA/IDE/MFM/RLL support +# Device Drivers # [snip] # # IDE chipset support/bugfixes # +# CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_CHIPSETS is not
Re: ide problems: 2.6.22-git17 working, 2.6.23-rc1* is not
Quoting Bartlomiej Zolnierkiewicz ([EMAIL PROTECTED]): Please retry with the latest -git kernel and if the problem is still there install git, get kernel tree and run git-bisect. I ran over make menuconfig and did a few changes. http://www.dth.net/kernel/config-2.6.23-rc1-git5 It boots, but freezes solid before doing any work as a firewall. I was able to catch boot messages with netconsole http://www.dth.net/kernel/via_output_2.6.23-rc1-git5 It didn't respond after the last line. magig sysrq etc, all nada. Will start to get acquainted with git ;-) Danny -- - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: ide problems: 2.6.22-git17 working, 2.6.23-rc1* is not
Danny ter Haar wrote: Quoting Bartlomiej Zolnierkiewicz ([EMAIL PROTECTED]): Please retry with the latest -git kernel and if the problem is still there install git, get kernel tree and run git-bisect. I ran over make menuconfig and did a few changes. http://www.dth.net/kernel/config-2.6.23-rc1-git5 Maybe try to : disable BSG ( maybe some leftover bug ) boot acpi=off ( that got merged kind late ) Danny Gabriel - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: ide problems: 2.6.22-git17 working, 2.6.23-rc1* is not
Quoting Gabriel C ([EMAIL PROTECTED]): Maybe try to : disable BSG ( maybe some leftover bug ) boot acpi=off ( that got merged kind late ) My first git disected kernel wouldn't boot, but with acpi=off it would indeed boot! As did the 2.6.23-rc1-git5 kernel... I will bisect further to find out exactly what patch is playing up in my particular setup. thanks for the tip! ;-) Danny -- - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: ide problems: 2.6.22-git17 working, 2.6.23-rc1* is not
Danny ter Haar wrote: [ added linux-acpi and Len to CC ] Quoting Gabriel C ([EMAIL PROTECTED]): Maybe try to : disable BSG ( maybe some leftover bug ) boot acpi=off ( that got merged kind late ) My first git disected kernel wouldn't boot, but with acpi=off it would indeed boot! Now while we think is ACPI this should be easy for you to bisect. This commit http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=39804b20f62532fa05c2a8c3e2d1ae551fd0327b merged ACPI so this one should be your first bad one. Maybe Len has some idea and you don't need to bisect :) As did the 2.6.23-rc1-git5 kernel... I will bisect further to find out exactly what patch is playing up in my particular setup. thanks for the tip! ;-) You are welcome :) Danny Gabriel - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/