Re: SATA-performance part 2
> after deinstallation of oprofile and only soft reboots (no hardware power > off) > these values STAYED (linux 48 MB/s) !! even for a brand new installation of > OpenSuSE 10.2 to another partition! > After a hardware power off everything was again like before (26 MB/s). > > So now the interesting questions to me are: > > 1. What is oprofile doing with my system ?? Especially what is been changed > that remains a reboot ?? this is odd. (but encouraging).. the one thing I can imagine oprofile doing is disabling the nmi_watchdog... you can simulate the same effect by passing "nmi_watchdog=0" on the kernel commandline (and there's something in /proc/sys as well to disable it at runtime) - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
SATA-performance part 2
Dear all, now I installed oprofile as suggested, and very interesting things happend: System: OpenSuSE 10.2 with AHCI on, disk: Solid State Disk (Flash Disk) Test: Write blocks of 1MB. Do fsync() every 1GB. Measure time for each GB. before installation of oprofile: testOpenSuSE 10.2 FreeBSD 6.2 write to raw device 25GB 26+/-1 MB/s at 4-10% CPU48+/-0 MB/s at 1% CPU write to ext3 2GB 39+/-5 MB/s at 10-15% CPU after installation of oprofile: testOpenSuSE 10.2 FreeBSD 6.2 write to raw device 25GB 48+/-0.5 MB/s at 4-10% CPU 49+/-0 MB/s at 1% CPU write to ext3 (writeback) 2GB 40+/-5 MB/s at 10-15% CPU after deinstallation of oprofile and only soft reboots (no hardware power off) these values STAYED (linux 48 MB/s) !! even for a brand new installation of OpenSuSE 10.2 to another partition! After a hardware power off everything was again like before (26 MB/s). So now the interesting questions to me are: 1. What is oprofile doing with my system ?? Especially what is been changed that remains a reboot ?? 2. Buffers: All those that told me, that linux raw devices are totally unbuffered and thus are slower than devices with filesystems. Are you sure? If yes, where do you think comes this increase of speed (26 to 48) ?? 3. Advices using ext3 with writeback option: I do not see an increase of performance with that. Thanks, Martin - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
SATA-performance part 2
Dear all, now I installed oprofile as suggested, and very interesting things happend: System: OpenSuSE 10.2 with AHCI on, disk: Solid State Disk (Flash Disk) Test: Write blocks of 1MB. Do fsync() every 1GB. Measure time for each GB. before installation of oprofile: testOpenSuSE 10.2 FreeBSD 6.2 write to raw device 25GB 26+/-1 MB/s at 4-10% CPU48+/-0 MB/s at 1% CPU write to ext3 2GB 39+/-5 MB/s at 10-15% CPU after installation of oprofile: testOpenSuSE 10.2 FreeBSD 6.2 write to raw device 25GB 48+/-0.5 MB/s at 4-10% CPU 49+/-0 MB/s at 1% CPU write to ext3 (writeback) 2GB 40+/-5 MB/s at 10-15% CPU after deinstallation of oprofile and only soft reboots (no hardware power off) these values STAYED (linux 48 MB/s) !! even for a brand new installation of OpenSuSE 10.2 to another partition! After a hardware power off everything was again like before (26 MB/s). So now the interesting questions to me are: 1. What is oprofile doing with my system ?? Especially what is been changed that remains a reboot ?? 2. Buffers: All those that told me, that linux raw devices are totally unbuffered and thus are slower than devices with filesystems. Are you sure? If yes, where do you think comes this increase of speed (26 to 48) ?? 3. Advices using ext3 with writeback option: I do not see an increase of performance with that. Thanks, Martin - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: SATA-performance part 2
after deinstallation of oprofile and only soft reboots (no hardware power off) these values STAYED (linux 48 MB/s) !! even for a brand new installation of OpenSuSE 10.2 to another partition! After a hardware power off everything was again like before (26 MB/s). So now the interesting questions to me are: 1. What is oprofile doing with my system ?? Especially what is been changed that remains a reboot ?? this is odd. (but encouraging).. the one thing I can imagine oprofile doing is disabling the nmi_watchdog... you can simulate the same effect by passing nmi_watchdog=0 on the kernel commandline (and there's something in /proc/sys as well to disable it at runtime) - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/