Re: Still "eth0: trigger_send() called with the transmitter busy" in 2.4.0-test12
On Tue, 12 Dec 2000 18:46:42 +0100, Juan blurted forth: > Hi! > > This error exists since 2.4.0-test10preX or so. It occurs when the > network interface is activated. > > I'm using RedHat 7.0 and my ethernet card is a "Kingston EtheRx KNE20 > Plug and Play ISA Adapter". I'm unable to access the Internet because > the ethernet card doesn't work :-(. Besides, the card uses two > interrupts (?) and there are two interfaces (eth0 y eth1) when I have > only one (?). > [snip] > --- Next Part --- > > Card 1 'KTC2000:Kingston EtheRx KNE20 Plug and Play ISA Adapter' PnP version 1.0 >Product version 1.0 >Logical device 0 'RTL8019:Unknown' > Supported registers 0x2 > Compatible device PNP80d6 > Device is active > Active port 0x,0x,0x,0x,0x,0x,0x,0x > Active IRQ 255 [0xff],255 [0xff] > Active DMA 255,255 > Active memory 0x,0x,0x,0x > Resources 0 >Priority preferred >Port 0x240-0x380, align 0x1f, size 0x20, 10-bit address decoding >IRQ 3,4,5,2/9,10,11,12,15 High-Edge try loading the rtl81*.o module(s) until it works right... you should see a message for eth1 in dmesg about it -- .oO gnea at rochester dot rr dot com Oo. .oO url: http://garson.org/~gnea Oo. "You can tune a filesystem, but you can't tuna fish" -unknown - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/
Still "eth0: trigger_send() called with the transmitter busy" in 2.4.0-test12
Hi! This error exists since 2.4.0-test10preX or so. It occurs when the network interface is activated. I'm using RedHat 7.0 and my ethernet card is a "Kingston EtheRx KNE20 Plug and Play ISA Adapter". I'm unable to access the Internet because the ethernet card doesn't work :-(. Besides, the card uses two interrupts (?) and there are two interfaces (eth0 y eth1) when I have only one (?). Besides, mouse stops working and hangs the computer if the network interface is deactivated and I rerun the gpm program. Maybe, my hardware is buggy but it works fine with 2.2.18. Bye! -- D. Juan Piernas Cánovas Departamento de Ingeniería y Tecnología de Computadores Facultad de Informática. Universidad de Murcia Campus de Espinardo - 30080 Murcia (SPAIN) Tel.: +34968367657Fax: +34968364151 email: [EMAIL PROTECTED] PGP public key: http://pgp.rediris.es:11371/pks/lookup?search=piernas%40ditec.um.es=index CPU0 0: 11683 XT-PIC timer 1:258 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 1 XT-PIC NE2000 10: 0 XT-PIC es1371 12: 0 XT-PIC NE2000 14: 3047 XT-PIC ide0 15: 6 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0 -001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0213-0213 : isapnp read 0240-025f : eth1 02f8-02ff : serial(auto) 0300-031f : eth0 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0a79-0a79 : isapnp write 0cf8-0cff : PCI conf1 e000-e00f : VIA Technologies, Inc. Bus Master IDE e000-e007 : ide0 e008-e00f : ide1 e800-e83f : Ensoniq ES1371 [AudioPCI-97] e800-e83f : es1371 Card 1 'KTC2000:Kingston EtheRx KNE20 Plug and Play ISA Adapter' PnP version 1.0 Product version 1.0 Logical device 0 'RTL8019:Unknown' Supported registers 0x2 Compatible device PNP80d6 Device is active Active port 0x,0x,0x,0x,0x,0x,0x,0x Active IRQ 255 [0xff],255 [0xff] Active DMA 255,255 Active memory 0x,0x,0x,0x Resources 0 Priority preferred Port 0x240-0x380, align 0x1f, size 0x20, 10-bit address decoding IRQ 3,4,5,2/9,10,11,12,15 High-Edge
Still eth0: trigger_send() called with the transmitter busy in 2.4.0-test12
Hi! This error exists since 2.4.0-test10preX or so. It occurs when the network interface is activated. I'm using RedHat 7.0 and my ethernet card is a "Kingston EtheRx KNE20 Plug and Play ISA Adapter". I'm unable to access the Internet because the ethernet card doesn't work :-(. Besides, the card uses two interrupts (?) and there are two interfaces (eth0 y eth1) when I have only one (?). Besides, mouse stops working and hangs the computer if the network interface is deactivated and I rerun the gpm program. Maybe, my hardware is buggy but it works fine with 2.2.18. Bye! -- D. Juan Piernas Cánovas Departamento de Ingeniería y Tecnología de Computadores Facultad de Informática. Universidad de Murcia Campus de Espinardo - 30080 Murcia (SPAIN) Tel.: +34968367657Fax: +34968364151 email: [EMAIL PROTECTED] PGP public key: http://pgp.rediris.es:11371/pks/lookup?search=piernas%40ditec.um.esop=index CPU0 0: 11683 XT-PIC timer 1:258 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 1 XT-PIC NE2000 10: 0 XT-PIC es1371 12: 0 XT-PIC NE2000 14: 3047 XT-PIC ide0 15: 6 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0 -001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0213-0213 : isapnp read 0240-025f : eth1 02f8-02ff : serial(auto) 0300-031f : eth0 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0a79-0a79 : isapnp write 0cf8-0cff : PCI conf1 e000-e00f : VIA Technologies, Inc. Bus Master IDE e000-e007 : ide0 e008-e00f : ide1 e800-e83f : Ensoniq ES1371 [AudioPCI-97] e800-e83f : es1371 Card 1 'KTC2000:Kingston EtheRx KNE20 Plug and Play ISA Adapter' PnP version 1.0 Product version 1.0 Logical device 0 'RTL8019:Unknown' Supported registers 0x2 Compatible device PNP80d6 Device is active Active port 0x,0x,0x,0x,0x,0x,0x,0x Active IRQ 255 [0xff],255 [0xff] Active DMA 255,255 Active memory 0x,0x,0x,0x Resources 0 Priority preferred Port 0x240-0x380, align 0x1f, size 0x20, 10-bit address decoding IRQ 3,4,5,2/9,10,11,12,15 High-Edge