Re: UDMA(66) drive coming up as UDMA(33)?
I'm currently running a BP6 with a on board HPT366 and a 7200rpm drive. From what I've seen with my setup at home that 19.51 MB/s sounds just about right for a hdparm test. When the manual is refering to the "UDMA 4 66 Mb/s" their talking about the maximum burst rate for the ATA bus not the max transfer rate, someone please correct me if I'm worng. -Eric Olinger - Original Message - From: "David St.Clair" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, April 09, 2001 8:41 PM Subject: Re: UDMA(66) drive coming up as UDMA(33)? > Well, I'm positive what I have is an 80pin cable. I may try a diffrent > one. I guess I could benchmark the drive in windows and see how it > compares to linux. (Both are on the same drive). The HPT366 chip is > integrated on the BE6 motherboard. > > The manual says PIO 4 mode should get about 16.6 Mb/s, UDMA 2 33 Mb/s, > and UDMA 4 66 Mb/s. Does anyone know what the correct numbers I should > be seeing in linux? (/w hdparm -t) > > Again, my hardware is: > > Quantum Fireball KA 13.6 7200 rpm HD > Abit BE6 /w integrated HPT366 chip > > Kernel 2.4.3 > > > Thanks, > > David St.Clair > > > > > On 09 Apr 2001 19:39:23 -0700, Nicholas Knight wrote: > > - Original Message - > > From: "David St.Clair" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Saturday, April 07, 2001 10:36 AM > > Subject: UDMA(66) drive coming up as UDMA(33)? > > > > > > > I'm trying to get my hard drive to use UDMA/66. I'm thinking the cable > > > is not being detected. When the HPT366 bios is set to UDMA 4; using > > > hdparm -t, I get a transfer rate of 19.51 MB/s. When the HPT366 bios is > > > set to PIO 4 the transfer rate is the same. Is this normal for a UDMA/66 > > > drive? What makes me think something is wrong is that the log says > > > > The speed is dependant on the drive, and has absilutely nothing to do with > > the UDMA mode, beyond that the controller and cable need to be able to > > support at least the speed the drive is recieving/outputting data in order > > for the drive to operate at full speed, 19.51MB/sec sounds right for a good > > 7200RPM HDD > > > > > > > > "ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:pio" <-- PIO? > > > > hmm this is a little odd but I don't know the ins and outs of the HPT366 > > controller > > > > > > > > and > > > > > > "hde: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, > > > UDMA(33)" <--- UDMA(33)? shouldn't it be UDMA(66)? > > > > > > > this certainly sounds like it's not detecting the cable properly... have you > > tried replacing it with a new cable that you KNOW supports ATA/66? > > > > > > > HPT366: onboard version of chipset, pin1=1 pin2=2 > > > > is the HPT366 controller in an add-in card or built into the motherboard? it > > looks like it's builtin from this line > > > > the bottom line here is that the cable probably isn't being detected > > properly for some reason, I doubt if it's a kernel problem, the cable is > > probably "bad", try picking up a new ATA/66+ cable and putting it in there > > this shouldn't actually cause you problems unless you're often transferring > > more than 33MB/sec though, which isn't likely on a desktop system, ATA/66 > > and ATA/100 are *generaly* overkill for most desktop systems, even for many > > powerusers > > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: UDMA(66) drive coming up as UDMA(33)?
I'm currently running a BP6 with a on board HPT366 and a 7200rpm drive. From what I've seen with my setup at home that 19.51 MB/s sounds just about right for a hdparm test. When the manual is refering to the "UDMA 4 66 Mb/s" their talking about the maximum burst rate for the ATA bus not the max transfer rate, someone please correct me if I'm worng. -Eric Olinger - Original Message - From: "David St.Clair" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, April 09, 2001 8:41 PM Subject: Re: UDMA(66) drive coming up as UDMA(33)? Well, I'm positive what I have is an 80pin cable. I may try a diffrent one. I guess I could benchmark the drive in windows and see how it compares to linux. (Both are on the same drive). The HPT366 chip is integrated on the BE6 motherboard. The manual says PIO 4 mode should get about 16.6 Mb/s, UDMA 2 33 Mb/s, and UDMA 4 66 Mb/s. Does anyone know what the correct numbers I should be seeing in linux? (/w hdparm -t) Again, my hardware is: Quantum Fireball KA 13.6 7200 rpm HD Abit BE6 /w integrated HPT366 chip Kernel 2.4.3 Thanks, David St.Clair On 09 Apr 2001 19:39:23 -0700, Nicholas Knight wrote: - Original Message - From: "David St.Clair" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, April 07, 2001 10:36 AM Subject: UDMA(66) drive coming up as UDMA(33)? I'm trying to get my hard drive to use UDMA/66. I'm thinking the cable is not being detected. When the HPT366 bios is set to UDMA 4; using hdparm -t, I get a transfer rate of 19.51 MB/s. When the HPT366 bios is set to PIO 4 the transfer rate is the same. Is this normal for a UDMA/66 drive? What makes me think something is wrong is that the log says The speed is dependant on the drive, and has absilutely nothing to do with the UDMA mode, beyond that the controller and cable need to be able to support at least the speed the drive is recieving/outputting data in order for the drive to operate at full speed, 19.51MB/sec sounds right for a good 7200RPM HDD "ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:pio" -- PIO? hmm this is a little odd but I don't know the ins and outs of the HPT366 controller and "hde: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, UDMA(33)" --- UDMA(33)? shouldn't it be UDMA(66)? this certainly sounds like it's not detecting the cable properly... have you tried replacing it with a new cable that you KNOW supports ATA/66? HPT366: onboard version of chipset, pin1=1 pin2=2 is the HPT366 controller in an add-in card or built into the motherboard? it looks like it's builtin from this line the bottom line here is that the cable probably isn't being detected properly for some reason, I doubt if it's a kernel problem, the cable is probably "bad", try picking up a new ATA/66+ cable and putting it in there this shouldn't actually cause you problems unless you're often transferring more than 33MB/sec though, which isn't likely on a desktop system, ATA/66 and ATA/100 are *generaly* overkill for most desktop systems, even for many powerusers - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: UDMA(66) drive coming up as UDMA(33)?
Well, I'm positive what I have is an 80pin cable. I may try a diffrent one. I guess I could benchmark the drive in windows and see how it compares to linux. (Both are on the same drive). The HPT366 chip is integrated on the BE6 motherboard. The manual says PIO 4 mode should get about 16.6 Mb/s, UDMA 2 33 Mb/s, and UDMA 4 66 Mb/s. Does anyone know what the correct numbers I should be seeing in linux? (/w hdparm -t) Again, my hardware is: Quantum Fireball KA 13.6 7200 rpm HD Abit BE6 /w integrated HPT366 chip Kernel 2.4.3 Thanks, David St.Clair On 09 Apr 2001 19:39:23 -0700, Nicholas Knight wrote: > - Original Message - > From: "David St.Clair" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, April 07, 2001 10:36 AM > Subject: UDMA(66) drive coming up as UDMA(33)? > > > > I'm trying to get my hard drive to use UDMA/66. I'm thinking the cable > > is not being detected. When the HPT366 bios is set to UDMA 4; using > > hdparm -t, I get a transfer rate of 19.51 MB/s. When the HPT366 bios is > > set to PIO 4 the transfer rate is the same. Is this normal for a UDMA/66 > > drive? What makes me think something is wrong is that the log says > > The speed is dependant on the drive, and has absilutely nothing to do with > the UDMA mode, beyond that the controller and cable need to be able to > support at least the speed the drive is recieving/outputting data in order > for the drive to operate at full speed, 19.51MB/sec sounds right for a good > 7200RPM HDD > > > > > "ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:pio" <-- PIO? > > hmm this is a little odd but I don't know the ins and outs of the HPT366 > controller > > > > > and > > > > "hde: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, > > UDMA(33)" <--- UDMA(33)? shouldn't it be UDMA(66)? > > > > this certainly sounds like it's not detecting the cable properly... have you > tried replacing it with a new cable that you KNOW supports ATA/66? > > > > HPT366: onboard version of chipset, pin1=1 pin2=2 > > is the HPT366 controller in an add-in card or built into the motherboard? it > looks like it's builtin from this line > > the bottom line here is that the cable probably isn't being detected > properly for some reason, I doubt if it's a kernel problem, the cable is > probably "bad", try picking up a new ATA/66+ cable and putting it in there > this shouldn't actually cause you problems unless you're often transferring > more than 33MB/sec though, which isn't likely on a desktop system, ATA/66 > and ATA/100 are *generaly* overkill for most desktop systems, even for many > powerusers - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: UDMA(66) drive coming up as UDMA(33)?
- Original Message - From: "David St.Clair" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, April 07, 2001 10:36 AM Subject: UDMA(66) drive coming up as UDMA(33)? > I'm trying to get my hard drive to use UDMA/66. I'm thinking the cable > is not being detected. When the HPT366 bios is set to UDMA 4; using > hdparm -t, I get a transfer rate of 19.51 MB/s. When the HPT366 bios is > set to PIO 4 the transfer rate is the same. Is this normal for a UDMA/66 > drive? What makes me think something is wrong is that the log says The speed is dependant on the drive, and has absilutely nothing to do with the UDMA mode, beyond that the controller and cable need to be able to support at least the speed the drive is recieving/outputting data in order for the drive to operate at full speed, 19.51MB/sec sounds right for a good 7200RPM HDD > > "ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:pio" <-- PIO? hmm this is a little odd but I don't know the ins and outs of the HPT366 controller > > and > > "hde: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, > UDMA(33)" <--- UDMA(33)? shouldn't it be UDMA(66)? > this certainly sounds like it's not detecting the cable properly... have you tried replacing it with a new cable that you KNOW supports ATA/66? > HPT366: onboard version of chipset, pin1=1 pin2=2 is the HPT366 controller in an add-in card or built into the motherboard? it looks like it's builtin from this line the bottom line here is that the cable probably isn't being detected properly for some reason, I doubt if it's a kernel problem, the cable is probably "bad", try picking up a new ATA/66+ cable and putting it in there this shouldn't actually cause you problems unless you're often transferring more than 33MB/sec though, which isn't likely on a desktop system, ATA/66 and ATA/100 are *generaly* overkill for most desktop systems, even for many powerusers - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: UDMA(66) drive coming up as UDMA(33)?
- Original Message - From: "Wilfried Weissmann" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, April 08, 2001 10:44 AM Subject: Re: UDMA(66) drive coming up as UDMA(33)? > "David St.Clair" wrote: > > > > I'm trying to get my hard drive to use UDMA/66. I'm thinking the cable > > is not being detected. When the HPT366 bios is set to UDMA 4; using > > I think that should be UDMA 5 for 66? As far as I can remember UDMA4 is 33MHz with S.M.A.R.T. which > add some reporting functionality. But I might be wrong... 66 is 4, 100 is 5, - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: UDMA(66) drive coming up as UDMA(33)?
- Original Message - From: "Wilfried Weissmann" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, April 08, 2001 10:44 AM Subject: Re: UDMA(66) drive coming up as UDMA(33)? "David St.Clair" wrote: I'm trying to get my hard drive to use UDMA/66. I'm thinking the cable is not being detected. When the HPT366 bios is set to UDMA 4; using I think that should be UDMA 5 for 66? As far as I can remember UDMA4 is 33MHz with S.M.A.R.T. which add some reporting functionality. But I might be wrong... 66 is 4, 100 is 5, - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: UDMA(66) drive coming up as UDMA(33)?
- Original Message - From: "David St.Clair" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, April 07, 2001 10:36 AM Subject: UDMA(66) drive coming up as UDMA(33)? I'm trying to get my hard drive to use UDMA/66. I'm thinking the cable is not being detected. When the HPT366 bios is set to UDMA 4; using hdparm -t, I get a transfer rate of 19.51 MB/s. When the HPT366 bios is set to PIO 4 the transfer rate is the same. Is this normal for a UDMA/66 drive? What makes me think something is wrong is that the log says The speed is dependant on the drive, and has absilutely nothing to do with the UDMA mode, beyond that the controller and cable need to be able to support at least the speed the drive is recieving/outputting data in order for the drive to operate at full speed, 19.51MB/sec sounds right for a good 7200RPM HDD "ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:pio" -- PIO? hmm this is a little odd but I don't know the ins and outs of the HPT366 controller and "hde: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, UDMA(33)" --- UDMA(33)? shouldn't it be UDMA(66)? this certainly sounds like it's not detecting the cable properly... have you tried replacing it with a new cable that you KNOW supports ATA/66? HPT366: onboard version of chipset, pin1=1 pin2=2 is the HPT366 controller in an add-in card or built into the motherboard? it looks like it's builtin from this line the bottom line here is that the cable probably isn't being detected properly for some reason, I doubt if it's a kernel problem, the cable is probably "bad", try picking up a new ATA/66+ cable and putting it in there this shouldn't actually cause you problems unless you're often transferring more than 33MB/sec though, which isn't likely on a desktop system, ATA/66 and ATA/100 are *generaly* overkill for most desktop systems, even for many powerusers - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: UDMA(66) drive coming up as UDMA(33)?
Well, I'm positive what I have is an 80pin cable. I may try a diffrent one. I guess I could benchmark the drive in windows and see how it compares to linux. (Both are on the same drive). The HPT366 chip is integrated on the BE6 motherboard. The manual says PIO 4 mode should get about 16.6 Mb/s, UDMA 2 33 Mb/s, and UDMA 4 66 Mb/s. Does anyone know what the correct numbers I should be seeing in linux? (/w hdparm -t) Again, my hardware is: Quantum Fireball KA 13.6 7200 rpm HD Abit BE6 /w integrated HPT366 chip Kernel 2.4.3 Thanks, David St.Clair On 09 Apr 2001 19:39:23 -0700, Nicholas Knight wrote: - Original Message - From: "David St.Clair" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, April 07, 2001 10:36 AM Subject: UDMA(66) drive coming up as UDMA(33)? I'm trying to get my hard drive to use UDMA/66. I'm thinking the cable is not being detected. When the HPT366 bios is set to UDMA 4; using hdparm -t, I get a transfer rate of 19.51 MB/s. When the HPT366 bios is set to PIO 4 the transfer rate is the same. Is this normal for a UDMA/66 drive? What makes me think something is wrong is that the log says The speed is dependant on the drive, and has absilutely nothing to do with the UDMA mode, beyond that the controller and cable need to be able to support at least the speed the drive is recieving/outputting data in order for the drive to operate at full speed, 19.51MB/sec sounds right for a good 7200RPM HDD "ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:pio" -- PIO? hmm this is a little odd but I don't know the ins and outs of the HPT366 controller and "hde: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, UDMA(33)" --- UDMA(33)? shouldn't it be UDMA(66)? this certainly sounds like it's not detecting the cable properly... have you tried replacing it with a new cable that you KNOW supports ATA/66? HPT366: onboard version of chipset, pin1=1 pin2=2 is the HPT366 controller in an add-in card or built into the motherboard? it looks like it's builtin from this line the bottom line here is that the cable probably isn't being detected properly for some reason, I doubt if it's a kernel problem, the cable is probably "bad", try picking up a new ATA/66+ cable and putting it in there this shouldn't actually cause you problems unless you're often transferring more than 33MB/sec though, which isn't likely on a desktop system, ATA/66 and ATA/100 are *generaly* overkill for most desktop systems, even for many powerusers - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: UDMA(66) drive coming up as UDMA(33)?
"David St.Clair" wrote: > > I'm trying to get my hard drive to use UDMA/66. I'm thinking the cable > is not being detected. When the HPT366 bios is set to UDMA 4; using I think that should be UDMA 5 for 66? As far as I can remember UDMA4 is 33MHz with S.M.A.R.T. which add some reporting functionality. But I might be wrong... > hdparm -t, I get a transfer rate of 19.51 MB/s. When the HPT366 bios is > set to PIO 4 the transfer rate is the same. Is this normal for a UDMA/66 > drive? What makes me think something is wrong is that the log says > > "ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:pio" <-- PIO? > > and > > "hde: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, > UDMA(33)" <--- UDMA(33)? shouldn't it be UDMA(66)? I got (kernel 2.2.18): HPT370: IDE controller on PCI bus 00 dev 98 HPT370: chipset revision 3 HPT370: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:pio hda and hdc are my hd's. My mainboard is a Abit KT7-RAID. > > Any ideas what might be wrong? Possible bug? I would set the UDMA5 for the HDs in the HPT bios. good luck, Wilfried - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
UDMA(66) drive coming up as UDMA(33)?
I'm trying to get my hard drive to use UDMA/66. I'm thinking the cable is not being detected. When the HPT366 bios is set to UDMA 4; using hdparm -t, I get a transfer rate of 19.51 MB/s. When the HPT366 bios is set to PIO 4 the transfer rate is the same. Is this normal for a UDMA/66 drive? What makes me think something is wrong is that the log says "ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:pio" <-- PIO? and "hde: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, UDMA(33)" <--- UDMA(33)? shouldn't it be UDMA(66)? Any ideas what might be wrong? Possible bug? Hardware: Abit BE6 Motherboard with HPT366 controller Quantum Fireball KA 13.6 UDMA/66 HD 80 pin connector Linux Partition is on /dev/hde2 Software: Redhat 7.0 Kernel 2.4.3 (non-modified) Use multi-mode by default = Y CMD640 chipset bugfix/support = Y RZ1000 chipset bugfix/support = Y Generic PCI IDE chipset support = Y Shareing PCI IDE interrupts support = Y Generic PCI bus-master DMA support = Y Use PCI DMA by default when available = Y HPT366 chipset support = Y Intel PIIXn chipsets support = Y PIIXn Tuning support = Y IGNORE word93 Validation BITS = Y My Log: Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx automount[415]: starting automounter version 3.1.6, path = /misc, maptype = file, mapname = /etc/auto.misc PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100%% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio HPT366: onboard version of chipset, pin1=1 pin2=2 HPT366: IDE controller on PCI bus 00 dev 98 PCI: Found IRQ 11 for device 00:13.0 PCI: The same IRQ used for device 00:0b.0 PCI: The same IRQ used for device 00:13.1 HPT366: chipset revision 1 HPT366: not 100%% native mode: will probe irqs later ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:pio, hdf:pio HPT366: IDE controller on PCI bus 00 dev 99 PCI: Found IRQ 11 for device 00:13.1 PCI: The same IRQ used for device 00:0b.0 PCI: The same IRQ used for device 00:13.0 HPT366: chipset revision 1 Initializing random number generator: succeeded HPT366: not 100%% native mode: will probe irqs later ide3: BM-DMA at 0xc800-0xc807, BIOS settings: hdg:pio, hdh:pio hdc: Pioneer DVD-ROM ATAPIModel DVD-113 0114, ATAPI CD/DVD-ROM drive hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive hde: QUANTUM FIREBALLP KA13.6, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xb400-0xb407,0xb802 on irq 11 hde: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, UDMA(33) hdc: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 hdd: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm Thank you, David St.Clair [EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
UDMA(66) drive coming up as UDMA(33)?
I'm trying to get my hard drive to use UDMA/66. I'm thinking the cable is not being detected. When the HPT366 bios is set to UDMA 4; using hdparm -t, I get a transfer rate of 19.51 MB/s. When the HPT366 bios is set to PIO 4 the transfer rate is the same. Is this normal for a UDMA/66 drive? What makes me think something is wrong is that the log says "ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:pio" -- PIO? and "hde: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, UDMA(33)" --- UDMA(33)? shouldn't it be UDMA(66)? Any ideas what might be wrong? Possible bug? Hardware: Abit BE6 Motherboard with HPT366 controller Quantum Fireball KA 13.6 UDMA/66 HD 80 pin connector Linux Partition is on /dev/hde2 Software: Redhat 7.0 Kernel 2.4.3 (non-modified) Use multi-mode by default = Y CMD640 chipset bugfix/support = Y RZ1000 chipset bugfix/support = Y Generic PCI IDE chipset support = Y Shareing PCI IDE interrupts support = Y Generic PCI bus-master DMA support = Y Use PCI DMA by default when available = Y HPT366 chipset support = Y Intel PIIXn chipsets support = Y PIIXn Tuning support = Y IGNORE word93 Validation BITS = Y My Log: Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx automount[415]: starting automounter version 3.1.6, path = /misc, maptype = file, mapname = /etc/auto.misc PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100%% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio HPT366: onboard version of chipset, pin1=1 pin2=2 HPT366: IDE controller on PCI bus 00 dev 98 PCI: Found IRQ 11 for device 00:13.0 PCI: The same IRQ used for device 00:0b.0 PCI: The same IRQ used for device 00:13.1 HPT366: chipset revision 1 HPT366: not 100%% native mode: will probe irqs later ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:pio, hdf:pio HPT366: IDE controller on PCI bus 00 dev 99 PCI: Found IRQ 11 for device 00:13.1 PCI: The same IRQ used for device 00:0b.0 PCI: The same IRQ used for device 00:13.0 HPT366: chipset revision 1 Initializing random number generator: succeeded HPT366: not 100%% native mode: will probe irqs later ide3: BM-DMA at 0xc800-0xc807, BIOS settings: hdg:pio, hdh:pio hdc: Pioneer DVD-ROM ATAPIModel DVD-113 0114, ATAPI CD/DVD-ROM drive hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive hde: QUANTUM FIREBALLP KA13.6, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xb400-0xb407,0xb802 on irq 11 hde: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, UDMA(33) hdc: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 hdd: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm Thank you, David St.Clair [EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/