Re: [linux-lvm] The size specified by "lvcreate -L" is not accurate
Dne 02. 09. 21 v 15:24 Gionatan Danti napsal(a): Il 2021-09-02 05:26 Yu, Mingli ha scritto: Per https://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git/tree/doc/RelNotes/v1.46.4.txt [1], after e2fsprogs upgrades to 1.46.4, the defaults for mke2fs now call for 256 byte inodes for all file systems (with the exception of file systems for the GNU Hurd, which only supports 128 byte inodes) and use "lvcreate -L 50 -n lv_test1 vg_test && mke2fs /dev/vg_test/lv_test1" and then continue to check the partiontion as below.(use lvm2 2.03.11 for the test) # df -h | grep dev/mapper/vg_test-lv_test1 /dev/mapper/vg_test-lv_test1 48M 14K 46M 1% /mnt/lv-test Though claim 50M as above, but it turns out to be only 48M. I think that allocation are done in multiple of physical extent size which, by default, is at 4 MB. 50 is not a multiple of 4 while 48 is, so "lvcreate" probably rounded down the required size. Using one or more "-v" should bring progressively more details. Hi As correctly pointed out by Gionatan - lvm2 allocates LVs in 'extent_size' allocation units. So with default 4M - you could have either 48M or 52M. In your case - you likely get 52M (as that's how lvm2 behaves - you get at least specified amount of space rounded up to nearest extent - see output of 'lvs' command. However your formatted extX volume also does have some internal 'filesystem' metadata - so LV of size 52M gives reduced ext4 space to 48M in your case as most likely 'ext4' header size 'cuts' away possibly 4M alignment used by ext4. Anyway - you if you care about max usage of every single byte on your storage - you could further tune/lower lvm2 metadata size + alignment + extent_size and also same you could tuning you could try with ext4 settings. This way you could take back some wasted space on alignments - which normally is negligible amount of disk space on modern high capacity sized drives. Regards Zdenek ___ linux-lvm mailing list linux-lvm@redhat.com https://listman.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Re: [linux-lvm] The size specified by "lvcreate -L" is not accurate
Il 2021-09-02 05:26 Yu, Mingli ha scritto: Per https://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git/tree/doc/RelNotes/v1.46.4.txt [1], after e2fsprogs upgrades to 1.46.4, the defaults for mke2fs now call for 256 byte inodes for all file systems (with the exception of file systems for the GNU Hurd, which only supports 128 byte inodes) and use "lvcreate -L 50 -n lv_test1 vg_test && mke2fs /dev/vg_test/lv_test1" and then continue to check the partiontion as below.(use lvm2 2.03.11 for the test) # df -h | grep dev/mapper/vg_test-lv_test1 /dev/mapper/vg_test-lv_test1 48M 14K 46M 1% /mnt/lv-test Though claim 50M as above, but it turns out to be only 48M. I think that allocation are done in multiple of physical extent size which, by default, is at 4 MB. 50 is not a multiple of 4 while 48 is, so "lvcreate" probably rounded down the required size. Using one or more "-v" should bring progressively more details. Regards. -- Danti Gionatan Supporto Tecnico Assyoma S.r.l. - www.assyoma.it email: g.da...@assyoma.it - i...@assyoma.it GPG public key ID: FF5F32A8 ___ linux-lvm mailing list linux-lvm@redhat.com https://listman.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
[linux-lvm] The size specified by "lvcreate -L" is not accurate
Per https://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git/tree/doc/RelNotes/v1.46.4.txt, after e2fsprogs upgrades to 1.46.4, the defaults for mke2fs now call for 256 byte inodes for all file systems (with the exception of file systems for the GNU Hurd, which only supports 128 byte inodes) and use "lvcreate -L 50 -n lv_test1 vg_test && mke2fs /dev/vg_test/lv_test1" and then continue to check the partiontion as below.(use lvm2 2.03.11 for the test) # df -h | grep dev/mapper/vg_test-lv_test1 /dev/mapper/vg_test-lv_test1 48M 14K 46M 1% /mnt/lv-test Though claim 50M as above, but it turns out to be only 48M. Thanks, ___ linux-lvm mailing list linux-lvm@redhat.com https://listman.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
