Re: ASUS U3100 Mini

2012-04-15 Thread Jan Prunk
The trick was with bad reception indoors.
I went testing to the balcony and framedrop dissapeared,
and I get a clear picture.
It seems that the Antenna is too weak in my apartment
to have a clear signal.

Kind regards,
Jan

On Sat, Apr 14, 2012 at 4:43 PM, Jan Prunk janpr...@gmail.com wrote:
 Hello Oliver,

 Thank you for your hint.

 I have written up a WIKI page for this device, which hasn't been
 written earlier.
 I am willing to test the device further, if any of the devs can give
 me further hints
 for that. It's still not in a full working mode. I mean video is
 somehow partially visible
 with VLC, but I am no expert in fine-tuning the device.

 The wiki page is located at
 http://linuxtv.org/wiki/index.php/ASUS_My_Cinema-U3100_Mini

 I will update the information there, if I will receive any further hints.

 Kind regards,
 Jan

 On Tue, Apr 10, 2012 at 11:32 AM, Oliver Schinagl
 oliver+l...@schinagl.nl wrote:
 Unfortunatly I am not familiar with the dib0700 device, so not sure if you
 need firmware (I assume so, check linuxtv wiki on any dib0700 device.

 To test the device in its most basic level, I think w_scan is the best bet,
 as it works without any other extra files.

 Oliver


 On 07-04-12 23:32Hello , Jan Prunk wrote:

 Hi Oliver !

 Thank you for your quick response.

 I assume that mine is a non-plus version.
 Do you know how I could proceed tuning the channel list,
 which I could then use in the combination with MPlayer ?

 Kind regards,
 Jan

 On Sat, Apr 7, 2012 at 10:15 PM, Oliver Schinagloliverl...@schinagl.nl
  wrote:

 Hi Jan,

 That page is probably not supported by linux-media and shows support
 (currently not working afaik) forthe U3100 mini PLUS. yes, minor
 difference
 in name, huge difference inside. The non-plus is a dib0700 based device,
 whereas the Plus is a af9035 based device. The non-plus should work out
 of
 the box on most distro's.

 Oliver


 On 07-04-12 20:21, Jan Prunk wrote:

 Hi !

 I have ASUS U3100 Mini USB Dongle and I would like to watch DVB-T
 TV streams with it on Debian. The dongle when its plugged in lights with
 the green light. Performing (dvb)scan segfaults.

 I (partially) followed these guides:

 http://linuxtv.org/wiki/index.php/Asus_U3100_Mini_plus_DVB-T

 I am using debian testing and it seems the device gets somehow
 recognised:

 [15120.976095] usb 3-1: USB disconnect, device number 2
 [15124.716041] usb 1-3: new high-speed USB device number 5 using
 ehci_hcd
 [15124.848958] usb 1-3: New USB device found, idVendor=0b05,
 idProduct=173f
 [15124.848964] usb 1-3: New USB device strings: Mfr=1, Product=2,
 SerialNumber=3
 [15124.848970] usb 1-3: Product: ASUS DVBT Tuner
 [15124.848974] usb 1-3: Manufacturer: ASUSTeK
 [15124.848977] usb 1-3: SerialNumber: 8500500875
 [15125.344564] IR NEC protocol handler initialized
 [15125.370992] IR RC5(x) protocol handler initialized
 [15125.409376] dib0700: loaded with support for 21 different
 device-types
 [15125.409588] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
 in cold state, will try to load a firmware
 [15125.412893] IR RC6 protocol handler initialized
 [15125.440888] IR JVC protocol handler initialized
 [15125.463698] dvb-usb: downloading firmware from file
 'dvb-usb-dib0700-1.20.fw'
 [15125.465236] IR Sony protocol handler initialized
 [15125.468745] IR MCE Keyboard/mouse protocol handler initialized
 [15125.473597] lirc_dev: IR Remote Control driver registered, major 249
 [15125.474883] IR LIRC bridge handler initialized
 [15125.671203] dib0700: firmware started successfully.
 [15126.172240] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
 in warm state.
 [15126.172346] dvb-usb: will pass the complete MPEG2 transport stream
 to the software demuxer.
 [15126.172902] DVB: registering new adapter (ASUS My Cinema U3100 Mini
 DVBT Tuner)
 [15126.390206] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
 [15126.607078] DiB0070: successfully identified
 [15126.708031] Registered IR keymap rc-dib0700-rc5
 [15126.708271] input: IR-receiver inside an USB DVB receiver as
 /devices/pci:00/:00:1d.7/usb1/1-3/rc/rc0/input12
 [15126.709054] rc0: IR-receiver inside an USB DVB receiver as
 /devices/pci:00/:00:1d.7/usb1/1-3/rc/rc0
 [15126.710265] dvb-usb: schedule remote query interval to 50 msecs.
 [15126.710273] dvb-usb: ASUS My Cinema U3100 Mini DVBT Tuner
 successfully initialized and connected.
 [15126.710492] usbcore: registered new interface driver dvb_usb_dib0700
 [15557.359129] scan[3798]: segfault at 3 ip b7620aa6 sp bfc268ac error
 4 in libc-2.13.so[b75e2000+156000]
 [15650.161033] scan[3836]: segfault at 3 ip b766faa6 sp bf9974dc error
 4 in libc-2.13.so[b7631000+156000]

 After this I used the guide at:
 http://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device

 Which resulted into:
 yang@vaio:~$ scan /usr/share/dvb/dvb-t/si-Ljubljana
  ~/.tzap/channels.conf
 scanning /usr/share/dvb/dvb-t/si-Ljubljana
 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb

Re: ASUS U3100 Mini

2012-04-14 Thread Jan Prunk
Hello Oliver,

Thank you for your hint.

I have written up a WIKI page for this device, which hasn't been
written earlier.
I am willing to test the device further, if any of the devs can give
me further hints
for that. It's still not in a full working mode. I mean video is
somehow partially visible
with VLC, but I am no expert in fine-tuning the device.

The wiki page is located at
http://linuxtv.org/wiki/index.php/ASUS_My_Cinema-U3100_Mini

I will update the information there, if I will receive any further hints.

Kind regards,
Jan

On Tue, Apr 10, 2012 at 11:32 AM, Oliver Schinagl
oliver+l...@schinagl.nl wrote:
 Unfortunatly I am not familiar with the dib0700 device, so not sure if you
 need firmware (I assume so, check linuxtv wiki on any dib0700 device.

 To test the device in its most basic level, I think w_scan is the best bet,
 as it works without any other extra files.

 Oliver


 On 07-04-12 23:32Hello , Jan Prunk wrote:

 Hi Oliver !

 Thank you for your quick response.

 I assume that mine is a non-plus version.
 Do you know how I could proceed tuning the channel list,
 which I could then use in the combination with MPlayer ?

 Kind regards,
 Jan

 On Sat, Apr 7, 2012 at 10:15 PM, Oliver Schinagloliverl...@schinagl.nl
  wrote:

 Hi Jan,

 That page is probably not supported by linux-media and shows support
 (currently not working afaik) forthe U3100 mini PLUS. yes, minor
 difference
 in name, huge difference inside. The non-plus is a dib0700 based device,
 whereas the Plus is a af9035 based device. The non-plus should work out
 of
 the box on most distro's.

 Oliver


 On 07-04-12 20:21, Jan Prunk wrote:

 Hi !

 I have ASUS U3100 Mini USB Dongle and I would like to watch DVB-T
 TV streams with it on Debian. The dongle when its plugged in lights with
 the green light. Performing (dvb)scan segfaults.

 I (partially) followed these guides:

 http://linuxtv.org/wiki/index.php/Asus_U3100_Mini_plus_DVB-T

 I am using debian testing and it seems the device gets somehow
 recognised:

 [15120.976095] usb 3-1: USB disconnect, device number 2
 [15124.716041] usb 1-3: new high-speed USB device number 5 using
 ehci_hcd
 [15124.848958] usb 1-3: New USB device found, idVendor=0b05,
 idProduct=173f
 [15124.848964] usb 1-3: New USB device strings: Mfr=1, Product=2,
 SerialNumber=3
 [15124.848970] usb 1-3: Product: ASUS DVBT Tuner
 [15124.848974] usb 1-3: Manufacturer: ASUSTeK
 [15124.848977] usb 1-3: SerialNumber: 8500500875
 [15125.344564] IR NEC protocol handler initialized
 [15125.370992] IR RC5(x) protocol handler initialized
 [15125.409376] dib0700: loaded with support for 21 different
 device-types
 [15125.409588] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
 in cold state, will try to load a firmware
 [15125.412893] IR RC6 protocol handler initialized
 [15125.440888] IR JVC protocol handler initialized
 [15125.463698] dvb-usb: downloading firmware from file
 'dvb-usb-dib0700-1.20.fw'
 [15125.465236] IR Sony protocol handler initialized
 [15125.468745] IR MCE Keyboard/mouse protocol handler initialized
 [15125.473597] lirc_dev: IR Remote Control driver registered, major 249
 [15125.474883] IR LIRC bridge handler initialized
 [15125.671203] dib0700: firmware started successfully.
 [15126.172240] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
 in warm state.
 [15126.172346] dvb-usb: will pass the complete MPEG2 transport stream
 to the software demuxer.
 [15126.172902] DVB: registering new adapter (ASUS My Cinema U3100 Mini
 DVBT Tuner)
 [15126.390206] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
 [15126.607078] DiB0070: successfully identified
 [15126.708031] Registered IR keymap rc-dib0700-rc5
 [15126.708271] input: IR-receiver inside an USB DVB receiver as
 /devices/pci:00/:00:1d.7/usb1/1-3/rc/rc0/input12
 [15126.709054] rc0: IR-receiver inside an USB DVB receiver as
 /devices/pci:00/:00:1d.7/usb1/1-3/rc/rc0
 [15126.710265] dvb-usb: schedule remote query interval to 50 msecs.
 [15126.710273] dvb-usb: ASUS My Cinema U3100 Mini DVBT Tuner
 successfully initialized and connected.
 [15126.710492] usbcore: registered new interface driver dvb_usb_dib0700
 [15557.359129] scan[3798]: segfault at 3 ip b7620aa6 sp bfc268ac error
 4 in libc-2.13.so[b75e2000+156000]
 [15650.161033] scan[3836]: segfault at 3 ip b766faa6 sp bf9974dc error
 4 in libc-2.13.so[b7631000+156000]

 After this I used the guide at:
 http://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device

 Which resulted into:
 yang@vaio:~$ scan /usr/share/dvb/dvb-t/si-Ljubljana
  ~/.tzap/channels.conf
 scanning /usr/share/dvb/dvb-t/si-Ljubljana
 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
 initial transponder 60200 0 2 9 3 1 3 0
 initial transponder 51400 0 2 9 3 1 2 0

 tune to:

 60200:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE

 WARNING:    tuning failed!!!

 tune to:

 60200

Re: ASUS U3100 Mini

2012-04-07 Thread Jan Prunk
Hi Oliver !

Thank you for your quick response.

I assume that mine is a non-plus version.
Do you know how I could proceed tuning the channel list,
which I could then use in the combination with MPlayer ?

Kind regards,
Jan

On Sat, Apr 7, 2012 at 10:15 PM, Oliver Schinagl oliverl...@schinagl.nl wrote:
 Hi Jan,

 That page is probably not supported by linux-media and shows support
 (currently not working afaik) forthe U3100 mini PLUS. yes, minor difference
 in name, huge difference inside. The non-plus is a dib0700 based device,
 whereas the Plus is a af9035 based device. The non-plus should work out of
 the box on most distro's.

 Oliver


 On 07-04-12 20:21, Jan Prunk wrote:

 Hi !

 I have ASUS U3100 Mini USB Dongle and I would like to watch DVB-T
 TV streams with it on Debian. The dongle when its plugged in lights with
 the green light. Performing (dvb)scan segfaults.

 I (partially) followed these guides:

 http://linuxtv.org/wiki/index.php/Asus_U3100_Mini_plus_DVB-T

 I am using debian testing and it seems the device gets somehow recognised:

 [15120.976095] usb 3-1: USB disconnect, device number 2
 [15124.716041] usb 1-3: new high-speed USB device number 5 using ehci_hcd
 [15124.848958] usb 1-3: New USB device found, idVendor=0b05,
 idProduct=173f
 [15124.848964] usb 1-3: New USB device strings: Mfr=1, Product=2,
 SerialNumber=3
 [15124.848970] usb 1-3: Product: ASUS DVBT Tuner
 [15124.848974] usb 1-3: Manufacturer: ASUSTeK
 [15124.848977] usb 1-3: SerialNumber: 8500500875
 [15125.344564] IR NEC protocol handler initialized
 [15125.370992] IR RC5(x) protocol handler initialized
 [15125.409376] dib0700: loaded with support for 21 different device-types
 [15125.409588] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
 in cold state, will try to load a firmware
 [15125.412893] IR RC6 protocol handler initialized
 [15125.440888] IR JVC protocol handler initialized
 [15125.463698] dvb-usb: downloading firmware from file
 'dvb-usb-dib0700-1.20.fw'
 [15125.465236] IR Sony protocol handler initialized
 [15125.468745] IR MCE Keyboard/mouse protocol handler initialized
 [15125.473597] lirc_dev: IR Remote Control driver registered, major 249
 [15125.474883] IR LIRC bridge handler initialized
 [15125.671203] dib0700: firmware started successfully.
 [15126.172240] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
 in warm state.
 [15126.172346] dvb-usb: will pass the complete MPEG2 transport stream
 to the software demuxer.
 [15126.172902] DVB: registering new adapter (ASUS My Cinema U3100 Mini
 DVBT Tuner)
 [15126.390206] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
 [15126.607078] DiB0070: successfully identified
 [15126.708031] Registered IR keymap rc-dib0700-rc5
 [15126.708271] input: IR-receiver inside an USB DVB receiver as
 /devices/pci:00/:00:1d.7/usb1/1-3/rc/rc0/input12
 [15126.709054] rc0: IR-receiver inside an USB DVB receiver as
 /devices/pci:00/:00:1d.7/usb1/1-3/rc/rc0
 [15126.710265] dvb-usb: schedule remote query interval to 50 msecs.
 [15126.710273] dvb-usb: ASUS My Cinema U3100 Mini DVBT Tuner
 successfully initialized and connected.
 [15126.710492] usbcore: registered new interface driver dvb_usb_dib0700
 [15557.359129] scan[3798]: segfault at 3 ip b7620aa6 sp bfc268ac error
 4 in libc-2.13.so[b75e2000+156000]
 [15650.161033] scan[3836]: segfault at 3 ip b766faa6 sp bf9974dc error
 4 in libc-2.13.so[b7631000+156000]

 After this I used the guide at:
 http://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device

 Which resulted into:
 yang@vaio:~$ scan /usr/share/dvb/dvb-t/si-Ljubljana
  ~/.tzap/channels.conf
 scanning /usr/share/dvb/dvb-t/si-Ljubljana
 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
 initial transponder 60200 0 2 9 3 1 3 0
 initial transponder 51400 0 2 9 3 1 2 0

 tune to:
 60200:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE

 WARNING:  tuning failed!!!

 tune to:
 60200:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
 (tuning failed)

 WARNING:  tuning failed!!!

 tune to:
 51400:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE

 WARNING:  tuning failed!!!

 tune to:
 51400:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
 (tuning failed)

 WARNING:  tuning failed!!!
 ERROR: initial tuning failed
 dumping lists (0 services)
 Done.

 So I seem to be stuck here.

 I please for some guidance here, thank you !

 Kind regards,
 Jan Prunk





-- 
Jan Prunk   http://www.prunk.si
0x00E80E86  http://pgp.prunk.si
http://AS50763.peeringdb.com
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html