Re: Hauppauge WinTV HVR-1400 (XC3028L) firmware loading problem
> > Hi, > > beginning with kernel 2.6.34.? the HVR-1400 stops working completely. > If I run the scan utility, only the fist tuning works and after that it > fails >always. On the next run of the utility it says "Device or resource busy". >Watching TV with vlc works never. I think that all the WinTV-HVR will be effected by theese problems. See thread "Wintv-HVR-1120 woes" > > This bug persist up to the current developer kernel 2.6.37-rc1-git7. > > Any ideas? Maybe it's a PCIe/ExpressCard related problem? Some more > popular USB sticks use the same chipset. > > Regards, > Alina > > Original-Nachricht > > Datum: Wed, 17 Mar 2010 02:14:43 +0100 > > Von: Alina Friedrichsen > > An: linux-media@vger.kernel.org > > Betreff: Hauppauge WinTV HVR-1400 firmware loading problem > > > My kernel is 2.6.33. > > When I want to watch DVB-T with VLC, loading the firmwares stops after > > the following and don't see any pictures: > > > > cx23885 :03:00.0: firmware: requesting xc3028L-v36.fw > > xc2028 3-0064: Loading 81 firmware images from xc3028L-v36.fw, type: > > xc2028 firmware, ver 3.6 > > xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id > > . > > xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id > > . > > > > And hangs forever. Any retries has the same effect. > > > > But if I start "scan /usr/share/dvb/dvb-t/de-Berlin" the tuning fails > > two times, then all firmwares load correctly and scanning works. > > > > xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id > > . > > xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id > > . > > xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id > > . > > xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id > > . > > xc2028 3-0064: Loading firmware for type=D2633 DTV78 (110), id > > . > > xc2028 3-0064: Loading SCODE for type=DTV78 DTV8 DIBCOM52 SCODE > > HAS_IF_5200 (61000300), id . > > > > After that all other firmware loadings works fine and I can watch TV. > > > > Any idea whats goes wrong? Is this a problem of the driver, or is my > > express card broken? I unfortunately has no other card to test. > > > > Thanks! > > Alina > > > > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Wintv-HVR-1120 woes
I have tried again. rm -i dvb-fe-tda10048-1.0.fw cp dvb-fe-tda10046.fw dvb-fe-tda10048-1.0.fw Now shutdown and boot dmesg [ 47.724011] tda18271: RF tracking filter calibration complete [ 47.780018] tda829x 8-004b: type set to tda8290+18271 [ 52.756163] saa7133[0]: registered device video0 [v4l2] [ 52.756260] saa7133[0]: registered device vbi0 [ 52.756312] saa7133[0]: registered device radio0 [ 52.774804] saa7134 ALSA driver for DMA sound loaded [ 52.774818] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 52.774837] saa7133[0]/alsa: saa7133[0] at 0xfcfff800 irq 16 registered as card -2 [ 52.826225] dvb_init() allocating 1 frontend [ 53.176016] tda829x 8-004b: type set to tda8290 [ 53.216128] tda18271 8-0060: attaching existing instance [ 53.216133] DVB: registering new adapter (saa7133[0]) [ 53.216137] DVB: registering adapter 3 frontend 0 (NXP TDA10048HN DVB-T)... [ 53.744012] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... [ 53.744470] saa7134 :01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw [ 53.789956] tda10048_firmware_upload: firmware read 24478 bytes. [ 53.789959] tda10048_firmware_upload: firmware incorrect size [ 53.789963] tda10048_firmware_upload: firmware upload failed [ 55.240026] tda18271_read_regs: ERROR: i2c_transfer returned: -5 [ 55.852518] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 55.852526] tda18271_set_analog_params: error -5 on line 1041 [ 91.004017] Clocksource tsc unstable (delta = -308694953 ns) [ 810.460024] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... [ 810.460039] saa7134 :01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw [ 810.463999] tda10048_firmware_upload: firmware read 24478 bytes. [ 810.464081] tda10048_firmware_upload: firmware incorrect size [ 810.464091] tda10048_firmware_upload: firmware upload failed now my WinTv-1120 works - Messaggio originale - > Da: Sasha Sirotkin > A: fabio tirapelle > Cc: Albin Kauffmann ; linux-media@vger.kernel.org > Inviato: Lun 25 ottobre 2010, 18:39:59 > Oggetto: Re: Wintv-HVR-1120 woes > > On Mon, Oct 25, 2010 at 1:51 PM, fabio tirapelle wrote: > > > > > >> Da: Albin Kauffmann > >> A: Sasha Sirotkin > >> Cc: fabio tirapelle ; linux-media@vger.kernel.org > >> Inviato: Lun 25 ottobre 2010, 13:20:13 > >> Oggetto: Re: Wintv-HVR-1120 woes > >> > >> On Mon, Oct 25, 2010 at 9:46 AM, Sasha Sirotkin > >>wrote: > >> > On Mon, Oct 25, 2010 at 9:24 AM, fabio tirapelle > >>wrote: > >> >> > >> >> > >> >>> Da: Sasha Sirotkin > >> >>> A: fabio tirapelle > >> >>> Cc: Albin Kauffmann ; > >>linux-media@vger.kernel.org > >> >>> Inviato: Lun 25 ottobre 2010, 09:18:28 > >> >>> Oggetto: Re: Wintv-HVR-1120 woes > >> >>> > >> >>> On Mon, Oct 25, 2010 at 8:16 AM, fabio tirapelle > >>wrote: > >> >>> > My WinTV-HVR-1120 works if I delete dvb-fe-tda10048-1.0.fw and > >> >>> > rename dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw > >> >>> > (see cf "HauppaugeWinTV-HVR-1120 on Unbuntu 10.04" thread). > >> >>> > After reboot my WinTV-HVR-1120 works. Ubuntu recognizes that the > >>firmware > >> >>>isn't > >> >>> > correct and doesn't load the firmware. > >> >>> > >> >>> How come it works without the firmware !? Is it possible that you > >> >>> booted into Windows before that and there is a correct firmware > >> >>> already running in the card ? > >> >> > >> >> No my mediacenter works only on Ubuntu > >> > > >> > This is weird. I will try this workaround tonight. > >> > >> Actually, I think that the dvb-fe-tda10048-1.0.fw firmware is still > >> loaded in the TV card and that this scenario has not changed anything. > >> > >> Fabio, have you tried to reboot several times in order to see if the > >> problem is really fixed? > >> And are you still getting some ERROR messages in `dmesg`? If not, this > >> is good but I don't understand :) > > > > Yes, if "several times" means 3 times. But I think this isn't a good >practice. > > So I have bought another card (NOVA-T-Stick) and I wait for a real solution. > > > > As I have written, the WinTV-1120 did work correctly with Ubunt 9.10. I >haven't >
Re: Wintv-HVR-1120 woes
> Da: Albin Kauffmann > A: Sasha Sirotkin > Cc: fabio tirapelle ; linux-media@vger.kernel.org > Inviato: Lun 25 ottobre 2010, 13:20:13 > Oggetto: Re: Wintv-HVR-1120 woes > > On Mon, Oct 25, 2010 at 9:46 AM, Sasha Sirotkin >wrote: > > On Mon, Oct 25, 2010 at 9:24 AM, fabio tirapelle >wrote: > >> > >> > >>> Da: Sasha Sirotkin > >>> A: fabio tirapelle > >>> Cc: Albin Kauffmann ; >linux-media@vger.kernel.org > >>> Inviato: Lun 25 ottobre 2010, 09:18:28 > >>> Oggetto: Re: Wintv-HVR-1120 woes > >>> > >>> On Mon, Oct 25, 2010 at 8:16 AM, fabio tirapelle >wrote: > >>> > My WinTV-HVR-1120 works if I delete dvb-fe-tda10048-1.0.fw and > >>> > rename dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw > >>> > (see cf "Hauppauge WinTV-HVR-1120 on Unbuntu 10.04" thread). > >>> > After reboot my WinTV-HVR-1120 works. Ubuntu recognizes that the >firmware > >>>isn't > >>> > correct and doesn't load the firmware. > >>> > >>> How come it works without the firmware !? Is it possible that you > >>> booted into Windows before that and there is a correct firmware > >>> already running in the card ? > >> > >> No my mediacenter works only on Ubuntu > > > > This is weird. I will try this workaround tonight. > > Actually, I think that the dvb-fe-tda10048-1.0.fw firmware is still > loaded in the TV card and that this scenario has not changed anything. > > Fabio, have you tried to reboot several times in order to see if the > problem is really fixed? > And are you still getting some ERROR messages in `dmesg`? If not, this > is good but I don't understand :) Yes, if "several times" means 3 times. But I think this isn't a good practice. So I have bought another card (NOVA-T-Stick) and I wait for a real solution. As I have written, the WinTV-1120 did work correctly with Ubunt 9.10. I haven't had problems with this version of Ubuntu. But the linux-firmware-nonfree package for Ubuntu 9.10 (karmic) didn't contain the dvb-fe-tda10048-1.0.fw (see http://packages.ubuntu.com/karmic/all/linux-firmware-nonfree/filelist) The dvb-fe-tda10048-1.0.fw was introduced with lucid (see http://packages.ubuntu.com/lucid/all/linux-firmware-nonfree/filelist). And now the question. Why without dvb-fe-tda10048-1.0.fw I haven't had problems and now with Ubuntu 10.04 I have problem exactly with this firmware? So I have renamed the dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw but I have seen that Ubuntu checks if the firmware is consistent. In the next two days I cannot post my dmesg, as I cannot access to my mediacenter. Tuesday night I will post it. What you think about my consideration about Ubuntu 9.10 and 10.04? > > Cheers, > > -- > Albin Kauffmann > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Wintv-HVR-1120 woes
> Da: Sasha Sirotkin > A: fabio tirapelle > Cc: Albin Kauffmann ; linux-media@vger.kernel.org > Inviato: Lun 25 ottobre 2010, 09:18:28 > Oggetto: Re: Wintv-HVR-1120 woes > > On Mon, Oct 25, 2010 at 8:16 AM, fabio tirapelle wrote: > > My WinTV-HVR-1120 works if I delete dvb-fe-tda10048-1.0.fw and > > rename dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw > > (see cf "Hauppauge WinTV-HVR-1120 on Unbuntu 10.04" thread). > > After reboot my WinTV-HVR-1120 works. Ubuntu recognizes that the firmware >isn't > > correct and doesn't load the firmware. > > How come it works without the firmware !? Is it possible that you > booted into Windows before that and there is a correct firmware > already running in the card ? No my mediacenter works only on Ubuntu > > > But I know that isn't a good practice. > > > > > > - Messaggio originale - > >> Da: Sasha Sirotkin > >> A: Albin Kauffmann > >> Cc: linux-media@vger.kernel.org > >> Inviato: Dom 24 ottobre 2010, 23:45:55 > >> Oggetto: Re: Wintv-HVR-1120 woes > >> > >> On Sun, Oct 24, 2010 at 10:22 PM, Sasha Sirotkin > >>wrote: > >> > On Sun, Oct 24, 2010 at 8:55 PM, Albin Kauffmann > >> >wrote: > >> >> On Thursday 21 October 2010 23:25:29 Sasha Sirotkin wrote: > >> >>> I'm having all sorts of troubles with Wintv-HVR-1120 on Ubuntu 10.10 > >> >>> (kernel 2.6.35-22). Judging from what I've seen on the net, including > >> >>> this mailing list, I'm not the only one not being able to use this > >> >>> card and no solution seem to exist. > >> >>> > >> >>> Problems: > >> >>> 1. The driver yells various cryptic error messages > >> >>> ("tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1, > >> >>> i2c_transfer returned: -5", "tda18271_set_analog_params: [1-0060|M] > >> >>> error -5 on line 1045", etc) > >> >> > >> >> yes, indeed :( > >> >> (cf "Hauppauge WinTV-HVR-1120 on Unbuntu 10.04" thread) > >> >> > >> >>> 2. DVB-T scan (using w_scan) produces no results > >> >> > >> >> Is this happening after each reboot? As far as I'm concerned, I've >never > >>had > >> >> problems with DVB-T scans. > >> >> > >> > > >> > Almost always. I think I had a lucky reboot or two, but most of the > >> > time DVB-T scan produces nothing. > >> > > >> >>> 3. Analog seems to work, but with very poor quality > >> >> > >> >> I just tried to use Analog TV in order to confirm the problem but I >cannot > >>get > >> >> any picture. Maybe I just don't know how to use it. I'm using commands > > like > >> >> (I'm located in France): > >> >> > >> >> mplayer tv:// -tv driver=v4l2:norm=SECAM:chanlist=france -tvscan >autostart > >> >> > >> >> ... and just get some "snow" on scanned channels. > >> >> As I might have a problem with my antenna (an interior one), I am > >> >> going >to > >> >> test it under Windows and report back my experience. > >> > > >> > I'm using tvtime-scanner > >> >> > >> >> Cheers, > >> >> > >> >> -- > >> >> Albin Kauffmann > >> >> > >> > > >> > > >> > I'm trying to downgrade the kernel now to see if it helps > >> > > >> > >> I went back as far as 2.6.30 and I still have this problem. 2.6.29 > >> does not recognize this card at all. > >> -- > >> To unsubscribe from this list: send the line "unsubscribe linux-media" in > >> the body of a message to majord...@vger.kernel.org > >> More majordomo info at http://vger.kernel.org/majordomo-info.html > >> > > > > > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-media" in > > the body of a message to majord...@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Wintv-HVR-1120 woes
My WinTV-HVR-1120 works if I delete dvb-fe-tda10048-1.0.fw and rename dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw (see cf "Hauppauge WinTV-HVR-1120 on Unbuntu 10.04" thread). After reboot my WinTV-HVR-1120 works. Ubuntu recognizes that the firmware isn't correct and doesn't load the firmware. But I know that isn't a good practice. - Messaggio originale - > Da: Sasha Sirotkin > A: Albin Kauffmann > Cc: linux-media@vger.kernel.org > Inviato: Dom 24 ottobre 2010, 23:45:55 > Oggetto: Re: Wintv-HVR-1120 woes > > On Sun, Oct 24, 2010 at 10:22 PM, Sasha Sirotkin >wrote: > > On Sun, Oct 24, 2010 at 8:55 PM, Albin Kauffmann > > wrote: > >> On Thursday 21 October 2010 23:25:29 Sasha Sirotkin wrote: > >>> I'm having all sorts of troubles with Wintv-HVR-1120 on Ubuntu 10.10 > >>> (kernel 2.6.35-22). Judging from what I've seen on the net, including > >>> this mailing list, I'm not the only one not being able to use this > >>> card and no solution seem to exist. > >>> > >>> Problems: > >>> 1. The driver yells various cryptic error messages > >>> ("tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1, > >>> i2c_transfer returned: -5", "tda18271_set_analog_params: [1-0060|M] > >>> error -5 on line 1045", etc) > >> > >> yes, indeed :( > >> (cf "Hauppauge WinTV-HVR-1120 on Unbuntu 10.04" thread) > >> > >>> 2. DVB-T scan (using w_scan) produces no results > >> > >> Is this happening after each reboot? As far as I'm concerned, I've never >had > >> problems with DVB-T scans. > >> > > > > Almost always. I think I had a lucky reboot or two, but most of the > > time DVB-T scan produces nothing. > > > >>> 3. Analog seems to work, but with very poor quality > >> > >> I just tried to use Analog TV in order to confirm the problem but I > >> cannot >get > >> any picture. Maybe I just don't know how to use it. I'm using commands like > >> (I'm located in France): > >> > >> mplayer tv:// -tv driver=v4l2:norm=SECAM:chanlist=france -tvscan autostart > >> > >> ... and just get some "snow" on scanned channels. > >> As I might have a problem with my antenna (an interior one), I am going to > >> test it under Windows and report back my experience. > > > > I'm using tvtime-scanner > >> > >> Cheers, > >> > >> -- > >> Albin Kauffmann > >> > > > > > > I'm trying to downgrade the kernel now to see if it helps > > > > I went back as far as 2.6.30 and I still have this problem. 2.6.29 > does not recognize this card at all. > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
Hi Yes, the same behaviour: random (after 3-4 boots) the card works correctly. The WinTV did work correctly with ubuntu 9.10. In Ubuntu 9.10 the package linux-firmware-nonfree didn't include the dvb-fe-tda10048-1.0.fw. I remember that Ubuntu 9.10 used for my card the dvb-fe-tda10046.fw. Now, Ubuntu 10.04 loads for my card the dvb-fe-tda10048-1.0.fw Its seems that with the 9.10 version, the card is recognized as WinTV-HVR-1100 or 1110 and now as WinTV-HVR-1120. I wait until you recompile the kernel with the v4l. Please tell me if this solves the problem Thanks - Messaggio originale - > Da: Albin Kauffmann > A: fabio tirapelle > Cc: linux-media@vger.kernel.org > Inviato: Mar 19 ottobre 2010, 20:32:50 > Oggetto: Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 > > On Monday 11 October 2010 11:57:14 fabio tirapelle wrote: > > Hi > > > > After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge > > WinTV-HVR-1120 (sometimes) doesn't work correctly. > > I get random the following errors: > > > > [ 53.216153] DVB: registering new adapter (saa7133[0]) > > [ 53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN > > DVB-T)... [ 53.840013] tda10048_firmware_upload: waiting for firmware > > upload (dvb-fe-tda10048-1.0.fw)... > > [ 53.840019] saa7134 :01:06.0: firmware: requesting > > dvb-fe-tda10048-1.0.fw [ 53.880505] tda10048_firmware_upload: firmware > > read 24878 bytes. [ 53.880509] tda10048_firmware_upload: firmware > > uploading > > [ 58.280136] tda10048_firmware_upload: firmware uploaded > > [ 59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer > > returned: -5 > > [ 59.024541] tda18271c2_rf_tracking_filters_correction: error -5 on line > > 264 [ 59.420153] tda18271_write_regs: ERROR: idx = 0x5, len = 1, > > i2c_transfer returned: -5 > > [ 59.420157] tda18271_toggle_output: error -5 on line 47 > > [ 91.004019] Clocksource tsc unstable (delta = -295012684 ns) > > [ 256.293639] eth0: link up. > > [ 256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > > [ 263.523498] eth0: link down. > > [ 265.258740] eth0: link up. > > [ 266.460026] eth0: no IPv6 routers present > > [ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer > > returned: -5 > > [ 9869.636178] tda18271_init: error -5 on line 826 > > [ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer > > returned: -5 > > [ 9872.636232] tda18271_toggle_output: error -5 on line 47 > > [ 9998.240167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer > > returned: -5 > > [ 9998.240178] tda18271_init: error -5 on line 826 > > [10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer > > returned: -5 > > [10001.240190] tda18271_toggle_output: error -5 on line 47 > > Hi, > > I have the same HVR-1120 TV card and I get the same kind of errors happening > on my ArchLinux installation (kernel 2.6.35). However, these errors are not > occuring after all boots. Indeed, I can watch TV (DVB-T) with no problem > after > > 3/4 of my reboots. Is your problem happening at all time ? > > I've started to recompile my own kernel with the v4l module from the hg > repository. I'll tell you if it improves the behavior. > > I don't use Ubuntu on my desktop computer but, as far as you are concerned, > you could first try to update your installation to the last Ubuntu 10.10 or > to > > compile the last Linux kernel. And tell us if it improves something ;) > > Cheers, > > -- > Albin Kauffmann > Open Wide - Architecte Open Source > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
Hi After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge WinTV-HVR-1120 (sometimes) doesn't work correctly. I get random the following errors: [ 53.216153] DVB: registering new adapter (saa7133[0]) [ 53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN DVB-T)... [ 53.840013] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... [ 53.840019] saa7134 :01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw [ 53.880505] tda10048_firmware_upload: firmware read 24878 bytes. [ 53.880509] tda10048_firmware_upload: firmware uploading [ 58.280136] tda10048_firmware_upload: firmware uploaded [ 59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 59.024541] tda18271c2_rf_tracking_filters_correction: error -5 on line 264 [ 59.420153] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 59.420157] tda18271_toggle_output: error -5 on line 47 [ 91.004019] Clocksource tsc unstable (delta = -295012684 ns) [ 256.293639] eth0: link up. [ 256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 263.523498] eth0: link down. [ 265.258740] eth0: link up. [ 266.460026] eth0: no IPv6 routers present [ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 9869.636178] tda18271_init: error -5 on line 826 [ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 9872.636232] tda18271_toggle_output: error -5 on line 47 [ 9998.240167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 9998.240178] tda18271_init: error -5 on line 826 [10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [10001.240190] tda18271_toggle_output: error -5 on line 47 Any ideas? Thanks -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
WinTV 1100 HD Model 1108
Hi I use the Hauppauge WinTV 1100 HD Model 1108 on Ubuntu 9.10 with Mythtv 0.22 Do you know if there is problem with this card? This question as the signal sometimes scratch. It seems a problem during process the mpeg stream from DVB-T Thanks -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Haupp. HVR-1100 problem and DVB-T card
- Messaggio originale - > Da: hermann pitton > A: fabio tirapelle > > > > I have installed mythtv on this configuration: > > > > Asus M3N78-VM GF8200 RGVSM > > > > AMD Ath64 X2LV 3100BOX6000+ 1MB > > > > Haupp. WinTV HVR-1100 -t/a PCI > > > > TechniSat SkyStar 2 DVB-S PCI > > > > nVidia GeForce 8200 > > > > Ubuntu 8.10 - Linux htpc 2.6.27-11-generic > I would try to test the HVR1110 next on another PC with known working > PCI hardware, also above different operating systems if possible. Hi Hermann! Thank you for your quick response. I tested the card on a M2N-VM DH and it works. So my best guess is that the card does not work on my actual motherboard. > We know that the HVR1110s are properly detected on almost all hardware. > Before thinking about replacing mobo/PSU, make sure the card is OK. Do you have a suggestion for a new mobo that you know is working (if I can keep my other hardware that would be great)? Thank you very mutch for your time, Fabio -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Haupp. HVR-1100 problem and DVB-T card
Hi Hermann > Hi Fabio, > > Am Donnerstag, den 08.10.2009, 20:02 + schrieb fabio tirapelle: > > Hi > > > > I have installed mythtv on this configuration: > > Asus M3N78-VM GF8200 RGVSM > > AMD Ath64 X2LV 3100BOX6000+ 1MB > > Haupp. WinTV HVR-1100 -t/a PCI > > TechniSat SkyStar 2 DVB-S PCI > > nVidia GeForce 8200 > > Ubuntu 8.10 - Linux htpc 2.6.27-11-generic > > did send to those likely interested too and might be able to give better > advice. > > > Two questions > > > > 1) But the Haupp. WinTV will not be found even if I have followed > > http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1110 > > http://ubuntuforums.org/showthread.php?t=623126&page=2 (#12) > > > > Output of dmesg > > > > [ 13.062214] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 > > [ 13.062223] b2c2_flexcop_pci :01:06.0: PCI INT A -> Link[LNKA] -> > > GSI > 17 (level, low) -> IRQ 17 > > [ 13.076654] DVB: registering new adapter (FlexCop Digital TV device) > > [ 13.078432] b2c2-flexcop: MAC address = 00:d0:d7:0d:30:88 > > [ 13.078664] b2c2-flexcop: i2c master_xfer failed > > [ 13.078893] b2c2-flexcop: i2c master_xfer failed > > [ 13.078895] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) > > [ 13.078897] CX24123: wrong demod revision: 87 > > [ 13.101063] saa7130/34: v4l2 driver version 0.2.14 loaded > > [ 13.360642] b2c2-flexcop: found 'ST STV0299 DVB-S' . > > [ 13.360647] DVB: registering frontend 0 (ST STV0299 DVB-S)... > > [ 13.360768] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at > > the > 'PCI' bus controlled by a 'FlexCopIIb' complete > > [ 13.363507] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 16 > > [ 13.363517] saa7134 :01:07.0: PCI INT A -> Link[LNKB] -> GSI 16 > > (level, > low) -> IRQ 16 > > [ 13.363523] saa7133[0]: found at :01:07.0, rev: 255, irq: 16, > > latency: > 255, mmio: 0x0 > > Memory allocation at the PCI bus fails and PCI latency is very high for > nothing in the end. > > > [ 13.363528] saa7133[0]: subsystem: :, board: UNKNOWN/GENERIC > [card=0,autodetected] > > Either the eeprom is corrupted, or more likely, this fails because of > the previous failing. > > > [ 13.363531] saa7133[0]: can't get MMIO memory @ 0x0 > > [ 13.363538] saa7134: probe of :01:07.0 failed with error -16 > > [ 13.393682] saa7134 ALSA driver for DMA sound loaded > > [ 13.393685] saa7134 ALSA: no saa7134 cards found > > > > ouput lspci > > 01:06.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB > > chip > / Technisat SkyStar2 DVB card (rev 02) > > 01:07.0 Multimedia controller: Philips Semiconductors > > SAA7131/SAA7133/SAA7135 > Video Broadcast Decoder (rev d1) > > > > 2) What kind of DVB-T card will you suggest for my configuration instead of > "Hauppage WinTv"? > > > > We have some unknowns on the various Hauppauge 1110s, but in general > they are assumed to be well supported. > > They are all auto eeprom detectable and only for latest revisions you > need some latest mercurial v4l-dvb. These look good now too. > > Could you try again with the HVR1110 as the only PCI card? I have tried without success > > If this still fails, the mobo seems not to be best treated anyway too, I > would guess the card is broken. What kind of mobo do you suggest? If necessary I can buy a new mobo > > Cheers, > Hermann Thanks Fabio -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Haupp. HVR-1100 problem and DVB-T card
Hi I have installed mythtv on this configuration: Asus M3N78-VM GF8200 RGVSM AMD Ath64 X2LV 3100BOX6000+ 1MB Haupp. WinTV HVR-1100 -t/a PCI TechniSat SkyStar 2 DVB-S PCI nVidia GeForce 8200 Ubuntu 8.10 - Linux htpc 2.6.27-11-generic Two questions 1) But the Haupp. WinTV will not be found even if I have followed http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1110 http://ubuntuforums.org/showthread.php?t=623126&page=2 (#12) Output of dmesg [ 13.062214] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 [ 13.062223] b2c2_flexcop_pci :01:06.0: PCI INT A -> Link[LNKA] -> GSI 17 (level, low) -> IRQ 17 [ 13.076654] DVB: registering new adapter (FlexCop Digital TV device) [ 13.078432] b2c2-flexcop: MAC address = 00:d0:d7:0d:30:88 [ 13.078664] b2c2-flexcop: i2c master_xfer failed [ 13.078893] b2c2-flexcop: i2c master_xfer failed [ 13.078895] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) [ 13.078897] CX24123: wrong demod revision: 87 [ 13.101063] saa7130/34: v4l2 driver version 0.2.14 loaded [ 13.360642] b2c2-flexcop: found 'ST STV0299 DVB-S' . [ 13.360647] DVB: registering frontend 0 (ST STV0299 DVB-S)... [ 13.360768] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete [ 13.363507] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 16 [ 13.363517] saa7134 :01:07.0: PCI INT A -> Link[LNKB] -> GSI 16 (level, low) -> IRQ 16 [ 13.363523] saa7133[0]: found at :01:07.0, rev: 255, irq: 16, latency: 255, mmio: 0x0 [ 13.363528] saa7133[0]: subsystem: :, board: UNKNOWN/GENERIC [card=0,autodetected] [ 13.363531] saa7133[0]: can't get MMIO memory @ 0x0 [ 13.363538] saa7134: probe of :01:07.0 failed with error -16 [ 13.393682] saa7134 ALSA driver for DMA sound loaded [ 13.393685] saa7134 ALSA: no saa7134 cards found ouput lspci 01:06.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02) 01:07.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1) 2) What kind of DVB-T card will you suggest for my configuration instead of "Hauppage WinTv"? Thanks for help -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html