Re: [PATCH] usb id addition for Terratec Cinergy T Stick Dual rev. 2
On 01/07/2013 10:13 PM, Malcolm Priestley wrote: On Mon, 2013-01-07 at 21:37 +0200, Antti Palosaari wrote: On 10/06/2012 06:40 PM, Mauro Carvalho Chehab wrote: Em Mon, 01 Oct 2012 14:21:34 +0300 Antti Palosaari escreveu: On 10/01/2012 02:15 PM, Mauro Carvalho Chehab wrote: Em Sun, 30 Sep 2012 19:36:50 +0200 Damien Bally escreveu: Le 29/09/2012 19:33, Mauro Carvalho Chehab a écrit : It seems that the it931x variant has bcdDevice equal to 2.00, from Damien's email: idVendor 0x0ccd TerraTec Electronic GmbH idProduct 0x0099 bcdDevice2.00 iManufacturer 1 ITE Technologies, Inc. iProduct2 DVB-T TV Stick iSerial 0 If the af9015 variant uses another bcdDevice, the fix should be simple. Alas, according to http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_T_USB_Dual_RC the af9015 variant appears to have the same bcdDevice. I join both lsusb outputs for comparison. Well, then the alternative is to let both drivers to handle this USB ID, and add a code there on each of them that will check if the device is the right one, perhaps by looking at iProduct string. If the driver doesn't recognize it, it should return -ENODEV at .probe() time. The USB core will call the second driver. It is the easiest solution, but there should be very careful. Those strings could change from device to device. I used earlier af9015 eeprom hash (those string as coming from the eeprom) to map TerraTec dual remote controller and git bug report quite soon as it didn't worked. After I looked the reason I found out they was changed some not meaningful value. Yeah, those strings can change, especially when vendors don't care enough to use a different USB ID/bcdDevice for different models. Yet, seems to be the cleaner approach, among the alternatives. Damien, care to test? http://git.linuxtv.org/anttip/media_tree.git/shortlog/refs/heads/it9135_tuner I split tuner out from IT9135 driver and due to that AF9035 driver supports IT9135 too (difference between AF9035 and IT9135 is integrated RF-tuner). I added iManufacturer based checks for both AF9015 and AF9035 drivers I can't see the point of adding this to the af9035/af9033 driver. It is going to turn into one enormous blob. Stop speaking bullshit! It increases AF9035/AF9033 driver size marginally. I could guess total binary size of AF9035+AF9033+IT913X (IT913X == that new tuner driver) is smaller than size of your IT9135 blob. The it913x is a stable driver and has it own entity moving forward. The only thing that needs to happen is the id is added to it913x driver and if it doesn't apply drop it. Nack. If you remember about year back when IT9135 was mainlined I reviewed that stuff and criticized it wasn't split correctly. I also pointed out all what is needed is new RF-tuner driver as AF9035/AF9033 is just same silicon, but without a integrated tuner. You said on one mail something like it is too much different than AF9035 family, I didn't cared to start stupid yes/no discussion on that time. You don't have any technical reason to NACK it. Last time I was "discussing" with DS3000+TS2020 split with you and you were against. Same happens now. I ask you to look driver guidelines [1] and stop speaking BS, instead start fixing your own stuff and you will never end up situation like that. [1] http://lwn.net/Articles/529490/ Antti -- http://palosaari.fi/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] usb id addition for Terratec Cinergy T Stick Dual rev. 2
On Mon, 2013-01-07 at 21:37 +0200, Antti Palosaari wrote: > On 10/06/2012 06:40 PM, Mauro Carvalho Chehab wrote: > > Em Mon, 01 Oct 2012 14:21:34 +0300 > > Antti Palosaari escreveu: > > > >> On 10/01/2012 02:15 PM, Mauro Carvalho Chehab wrote: > >>> Em Sun, 30 Sep 2012 19:36:50 +0200 > >>> Damien Bally escreveu: > >>> > > > Le 29/09/2012 19:33, Mauro Carvalho Chehab a écrit : > It seems that the it931x variant has bcdDevice equal to 2.00, > > from Damien's email: > > > > idVendor 0x0ccd TerraTec Electronic GmbH > > idProduct 0x0099 > > bcdDevice2.00 > > iManufacturer 1 ITE Technologies, Inc. > > iProduct2 DVB-T TV Stick > > iSerial 0 > > > > If the af9015 variant uses another bcdDevice, the fix should be simple. > > Alas, according to > http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_T_USB_Dual_RC the > af9015 variant appears to have the same bcdDevice. I join both lsusb > outputs for comparison. > >>> > >>> Well, then the alternative is to let both drivers to handle this USB ID, > >>> and add a code there on each of them that will check if the device is the > >>> right one, perhaps by looking at iProduct string. If the driver doesn't > >>> recognize it, it should return -ENODEV at .probe() time. The USB core will > >>> call the second driver. > >> > >> It is the easiest solution, but there should be very careful. Those > >> strings could change from device to device. I used earlier af9015 eeprom > >> hash (those string as coming from the eeprom) to map TerraTec dual > >> remote controller and git bug report quite soon as it didn't worked. > >> After I looked the reason I found out they was changed some not > >> meaningful value. > > > > Yeah, those strings can change, especially when vendors don't care enough > > to use a different USB ID/bcdDevice for different models. Yet, seems to > > be the cleaner approach, among the alternatives. > > Damien, care to test? > http://git.linuxtv.org/anttip/media_tree.git/shortlog/refs/heads/it9135_tuner > > I split tuner out from IT9135 driver and due to that AF9035 driver > supports IT9135 too (difference between AF9035 and IT9135 is integrated > RF-tuner). I added iManufacturer based checks for both AF9015 and AF9035 > drivers I can't see the point of adding this to the af9035/af9033 driver. It is going to turn into one enormous blob. The it913x is a stable driver and has it own entity moving forward. The only thing that needs to happen is the id is added to it913x driver and if it doesn't apply drop it. Nack. Regards Malcolm -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] usb id addition for Terratec Cinergy T Stick Dual rev. 2
On 10/06/2012 06:40 PM, Mauro Carvalho Chehab wrote: Em Mon, 01 Oct 2012 14:21:34 +0300 Antti Palosaari escreveu: On 10/01/2012 02:15 PM, Mauro Carvalho Chehab wrote: Em Sun, 30 Sep 2012 19:36:50 +0200 Damien Bally escreveu: Le 29/09/2012 19:33, Mauro Carvalho Chehab a écrit : It seems that the it931x variant has bcdDevice equal to 2.00, from Damien's email: idVendor 0x0ccd TerraTec Electronic GmbH idProduct 0x0099 bcdDevice2.00 iManufacturer 1 ITE Technologies, Inc. iProduct2 DVB-T TV Stick iSerial 0 If the af9015 variant uses another bcdDevice, the fix should be simple. Alas, according to http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_T_USB_Dual_RC the af9015 variant appears to have the same bcdDevice. I join both lsusb outputs for comparison. Well, then the alternative is to let both drivers to handle this USB ID, and add a code there on each of them that will check if the device is the right one, perhaps by looking at iProduct string. If the driver doesn't recognize it, it should return -ENODEV at .probe() time. The USB core will call the second driver. It is the easiest solution, but there should be very careful. Those strings could change from device to device. I used earlier af9015 eeprom hash (those string as coming from the eeprom) to map TerraTec dual remote controller and git bug report quite soon as it didn't worked. After I looked the reason I found out they was changed some not meaningful value. Yeah, those strings can change, especially when vendors don't care enough to use a different USB ID/bcdDevice for different models. Yet, seems to be the cleaner approach, among the alternatives. Damien, care to test? http://git.linuxtv.org/anttip/media_tree.git/shortlog/refs/heads/it9135_tuner I split tuner out from IT9135 driver and due to that AF9035 driver supports IT9135 too (difference between AF9035 and IT9135 is integrated RF-tuner). I added iManufacturer based checks for both AF9015 and AF9035 drivers regards Antti -- http://palosaari.fi/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] usb id addition for Terratec Cinergy T Stick Dual rev. 2
Em Mon, 01 Oct 2012 14:21:34 +0300 Antti Palosaari escreveu: > On 10/01/2012 02:15 PM, Mauro Carvalho Chehab wrote: > > Em Sun, 30 Sep 2012 19:36:50 +0200 > > Damien Bally escreveu: > > > >> > >> > >> Le 29/09/2012 19:33, Mauro Carvalho Chehab a écrit : > >>It seems that the it931x variant has bcdDevice equal to 2.00, > >>> from Damien's email: > >>> > >>> idVendor 0x0ccd TerraTec Electronic GmbH > >>> idProduct 0x0099 > >>> bcdDevice2.00 > >>> iManufacturer 1 ITE Technologies, Inc. > >>> iProduct2 DVB-T TV Stick > >>> iSerial 0 > >>> > >>> If the af9015 variant uses another bcdDevice, the fix should be simple. > >> > >> Alas, according to > >> http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_T_USB_Dual_RC the > >> af9015 variant appears to have the same bcdDevice. I join both lsusb > >> outputs for comparison. > > > > Well, then the alternative is to let both drivers to handle this USB ID, > > and add a code there on each of them that will check if the device is the > > right one, perhaps by looking at iProduct string. If the driver doesn't > > recognize it, it should return -ENODEV at .probe() time. The USB core will > > call the second driver. > > It is the easiest solution, but there should be very careful. Those > strings could change from device to device. I used earlier af9015 eeprom > hash (those string as coming from the eeprom) to map TerraTec dual > remote controller and git bug report quite soon as it didn't worked. > After I looked the reason I found out they was changed some not > meaningful value. Yeah, those strings can change, especially when vendors don't care enough to use a different USB ID/bcdDevice for different models. Yet, seems to be the cleaner approach, among the alternatives. Regards, Mauro > > t. Antti -- Regards, Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] usb id addition for Terratec Cinergy T Stick Dual rev. 2
On 10/01/2012 02:15 PM, Mauro Carvalho Chehab wrote: Em Sun, 30 Sep 2012 19:36:50 +0200 Damien Bally escreveu: Le 29/09/2012 19:33, Mauro Carvalho Chehab a écrit : It seems that the it931x variant has bcdDevice equal to 2.00, from Damien's email: idVendor 0x0ccd TerraTec Electronic GmbH idProduct 0x0099 bcdDevice2.00 iManufacturer 1 ITE Technologies, Inc. iProduct2 DVB-T TV Stick iSerial 0 If the af9015 variant uses another bcdDevice, the fix should be simple. Alas, according to http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_T_USB_Dual_RC the af9015 variant appears to have the same bcdDevice. I join both lsusb outputs for comparison. Well, then the alternative is to let both drivers to handle this USB ID, and add a code there on each of them that will check if the device is the right one, perhaps by looking at iProduct string. If the driver doesn't recognize it, it should return -ENODEV at .probe() time. The USB core will call the second driver. It is the easiest solution, but there should be very careful. Those strings could change from device to device. I used earlier af9015 eeprom hash (those string as coming from the eeprom) to map TerraTec dual remote controller and git bug report quite soon as it didn't worked. After I looked the reason I found out they was changed some not meaningful value. t. Antti -- http://palosaari.fi/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] usb id addition for Terratec Cinergy T Stick Dual rev. 2
Em Sun, 30 Sep 2012 19:36:50 +0200 Damien Bally escreveu: > > > Le 29/09/2012 19:33, Mauro Carvalho Chehab a écrit : > It seems that the it931x variant has bcdDevice equal to 2.00, > > from Damien's email: > > > > idVendor 0x0ccd TerraTec Electronic GmbH > > idProduct 0x0099 > > bcdDevice2.00 > > iManufacturer 1 ITE Technologies, Inc. > > iProduct2 DVB-T TV Stick > > iSerial 0 > > > > If the af9015 variant uses another bcdDevice, the fix should be simple. > > Alas, according to > http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_T_USB_Dual_RC the > af9015 variant appears to have the same bcdDevice. I join both lsusb > outputs for comparison. Well, then the alternative is to let both drivers to handle this USB ID, and add a code there on each of them that will check if the device is the right one, perhaps by looking at iProduct string. If the driver doesn't recognize it, it should return -ENODEV at .probe() time. The USB core will call the second driver. Regards, Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] usb id addition for Terratec Cinergy T Stick Dual rev. 2
Le 29/09/2012 19:33, Mauro Carvalho Chehab a écrit : It seems that the it931x variant has bcdDevice equal to 2.00, from Damien's email: idVendor 0x0ccd TerraTec Electronic GmbH idProduct 0x0099 bcdDevice2.00 iManufacturer 1 ITE Technologies, Inc. iProduct2 DVB-T TV Stick iSerial 0 If the af9015 variant uses another bcdDevice, the fix should be simple. Alas, according to http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_T_USB_Dual_RC the af9015 variant appears to have the same bcdDevice. I join both lsusb outputs for comparison. Regards Damien Bus 003 Device 003: ID 0ccd:0099 TerraTec Electronic GmbH Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize064 idVendor 0x0ccd TerraTec Electronic GmbH idProduct 0x0099 bcdDevice2.00 iManufacturer 1 Afatech iProduct2 DVB-T 2 iSerial 3 xx bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 71 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType33 bcdHID 1.01 bCountryCode0 Not supported bNumDescriptors 1 bDescriptorType34 Report wDescriptorLength 65 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes3 Transfer TypeInterrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 10 Device Qualifier (for other device speed): bLength10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize064 bNumConfigurations 1 Device Status: 0x (Bus Powered) Bus 002 Device 003: ID 0ccd:0099 TerraTec Electronic GmbH Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass0 (Defined at Interfa
Re: [PATCH] usb id addition for Terratec Cinergy T Stick Dual rev. 2
Em Fri, 28 Sep 2012 20:30:17 +0100
Malcolm Priestley escreveu:
> On Fri, 2012-09-28 at 20:55 +0300, Antti Palosaari wrote:
> > On 09/28/2012 07:34 PM, Damien Bally wrote:
> > > > I will NACK that initially because that USB ID already used by AF9015
> > >> driver. You have to explain / study what happens when AF9015 driver
> > >> claims that device same time.
> > >>
> > >
> > > Hi Antti
> > >
> > > With the Cinergy stick alone, dvb_usb_af9015 is predictably loaded, but
> > > doesn't prevent dvb_usb_it913x from working nicely.
> > >
> > > If an afatech 9015 stick is connected, such as an AverTV Volar Black HD
> > > (A850), it will be recognized and doesn't affect the other device.
> > >
> > > *But* it runs into trouble if the two devices were connected at bootup,
> > > or if the Cinergy stick is inserted after the other one :
> >
> > I am not sure what you do here but let it be clear.
> > There is same ID used by af9015 and it913x. Both drivers are loaded when
> > that ID appears. What I understand *both* drivers, af9015 and it913x
> > should detect if device is correct or not. If device is af9015 then
> > it913x should reject it with -ENODEV most likely without a I/O. If
> > device is it913x then af9015 should reject the device similarly. And you
> > must find out how to do that. It is not acceptable both drivers starts
> > doing I/O for same device same time.
> >
> Hi All
>
> Which module is loaded first depends on the order in
>
> /lib/modules/$(uname -r)/modules.usbmap
>
> Its is likely that af9015 will be first, so the it913x will need to be
> loaded first by added it to /etc/modules.
Well, builtin modules are loaded before, so if it931x is built with 'Y'
and af9015 with 'M', then it913x will be the first one.
As a general rule, don't trust on one being loaded before the other: the
best thing to do is to detect different USB ID and bcdDevice at the USB
Table. It seems that the it931x variant has bcdDevice equal to 2.00,
from Damien's email:
idVendor 0x0ccd TerraTec Electronic GmbH
idProduct 0x0099
bcdDevice2.00
iManufacturer 1 ITE Technologies, Inc.
iProduct2 DVB-T TV Stick
iSerial 0
If the af9015 variant uses another bcdDevice, the fix should be simple.
Btw, cx231xx and dib0700 does that for some Pixelviel devices. This is
how cx231xx declares his device (bcd 40.00 to 40.01):
{USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x4000,
0x4001),
.driver_info = CX231XX_BOARD_PV_PLAYTV_USB_HYBRID},
And dib0700 declares the same USB ID with bcdDevice range from 0.00 to 3f.00:
{ USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000,
0x3f00) },
If the bcdDevice is identical, then the driver should find a way to check it
during
.probe time, and return -ENODEV if the device doesn't match. The other USB
driver
will handle it properly.
Regards,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] usb id addition for Terratec Cinergy T Stick Dual rev. 2
On Fri, 2012-09-28 at 20:55 +0300, Antti Palosaari wrote: > On 09/28/2012 07:34 PM, Damien Bally wrote: > > > I will NACK that initially because that USB ID already used by AF9015 > >> driver. You have to explain / study what happens when AF9015 driver > >> claims that device same time. > >> > > > > Hi Antti > > > > With the Cinergy stick alone, dvb_usb_af9015 is predictably loaded, but > > doesn't prevent dvb_usb_it913x from working nicely. > > > > If an afatech 9015 stick is connected, such as an AverTV Volar Black HD > > (A850), it will be recognized and doesn't affect the other device. > > > > *But* it runs into trouble if the two devices were connected at bootup, > > or if the Cinergy stick is inserted after the other one : > > I am not sure what you do here but let it be clear. > There is same ID used by af9015 and it913x. Both drivers are loaded when > that ID appears. What I understand *both* drivers, af9015 and it913x > should detect if device is correct or not. If device is af9015 then > it913x should reject it with -ENODEV most likely without a I/O. If > device is it913x then af9015 should reject the device similarly. And you > must find out how to do that. It is not acceptable both drivers starts > doing I/O for same device same time. > Hi All Which module is loaded first depends on the order in /lib/modules/$(uname -r)/modules.usbmap Its is likely that af9015 will be first, so the it913x will need to be loaded first by added it to /etc/modules. I recall a similar problem exists with the DiB3000M-B driver with its faulty IDs. A solution may be for Cinergy to have its own module with extern access to both dvb_usb_device_properties structures and dvb_usbv2_probe them twice. Regards Malcolm > regards > Antti > > > --- > > [1.264018] usb 2-1: new high speed USB device using ehci_hcd and > > address 2 > > [1.382487] usb 2-1: New USB device found, idVendor=0ccd, idProduct=0099 > > [1.382490] usb 2-1: New USB device strings: Mfr=1, Product=2, > > SerialNumber=0 > > [1.382492] usb 2-1: Product: DVB-T TV Stick > > [1.382494] usb 2-1: Manufacturer: ITE Technologies, Inc. > > [1.385073] input: ITE Technologies, Inc. DVB-T TV Stick as > > /devices/pci:00/:00:1d.7/usb2/2-1/2-1:1.1/input/input1 > > [1.385147] generic-usb 0003:0CCD:0099.0001: input,hidraw0: USB HID > > v1.01 Keyboard [ITE Technologies, Inc. DVB-T TV Stick] on > > usb-:00:1d.7-1 input1 > > [5.045527] usbcore: registered new interface driver dvb_usb_it913x > > [5.147276] it913x: Chip Version=01 Chip Type=9135 > > [5.147524] it913x: Firmware Version 33684956 > > [5.148649] it913x: Remote HID mode NOT SUPPORTED > > [5.149024] it913x: Dual mode=3 Tuner Type=0 > > [5.149028] usb 2-1: dvb_usbv2: found a 'ITE 9135(9006) Generic' in > > warm state > > [5.149077] usb 2-1: dvb_usbv2: will pass the complete MPEG2 > > transport stream to the software demuxer > > [5.149307] DVB: registering new adapter (ITE 9135(9006) Generic) > > [5.174907] usb 1-4: dvb_usbv2: downloading firmware from file > > 'dvb-usb-af9015.fw' > > [5.241934] usb 1-4: dvb_usbv2: found a 'AverMedia AVerTV Volar Black > > HD (A850)' in warm state > > [5.614827] usb 1-4: dvb_usbv2: will pass the complete MPEG2 > > transport stream to the software demuxer > > [5.614866] DVB: registering new adapter (AverMedia AVerTV Volar > > Black HD (A850)) > > [5.710026] af9013: firmware version 4.95.0.0 > > [5.712151] DVB: registering adapter 1 frontend 0 (Afatech AF9013)... > > [5.813139] MXL5005S: Attached at address 0xc6 > > [5.818896] usb 1-4: dvb_usbv2: 'AverMedia AVerTV Volar Black HD > > (A850)' successfully initialized and connected > > [7.266161] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 > > [7.266247] it913x-fe: ADF table value:00 > > [9.267200] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 > > [ 11.267153] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 > > [ 13.267250] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 > > [ 15.267089] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 > > [ 17.267162] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 > > [ 19.267139] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 > > [ 19.267218] it913x-fe: Crystal Frequency :1200 Adc Frequency > > :2025 ADC X2: 01 > > [ 19.267296] usb 2-1: dvb_usbv2: 'ITE 9135(9006) Generic' error while > > loading driver (-19) > > [ 19.267472] usb 2-1: dvb_usbv2: 'ITE 9135(9006) Generic' successfully > > deinitialized and disconnected > > --- > > > > I'm unfortunately not able to rewrite the driver, but I'm willing to > > provide any information about the device to help its correct > > identification. Here is what lsusb yields : > >
Re: [PATCH] usb id addition for Terratec Cinergy T Stick Dual rev. 2
Le 28/09/2012 19:55, Antti Palosaari a écrit : I am not sure what you do here but let it be clear. There is same ID used by af9015 and it913x. Both drivers are loaded when that ID appears. What I understand *both* drivers, af9015 and it913x should detect if device is correct or not. If device is af9015 then it913x should reject it with -ENODEV most likely without a I/O. If device is it913x then af9015 should reject the device similarly. And you must find out how to do that. It is not acceptable both drivers starts doing I/O for same device same time. I'd gladly implement this, but I'm not a developper, for the moment ;-) I'm unfortunately not able to rewrite the driver, but I'm willing to provide any information about the device to help its correct identification. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] usb id addition for Terratec Cinergy T Stick Dual rev. 2
On 09/28/2012 07:34 PM, Damien Bally wrote: > I will NACK that initially because that USB ID already used by AF9015 driver. You have to explain / study what happens when AF9015 driver claims that device same time. Hi Antti With the Cinergy stick alone, dvb_usb_af9015 is predictably loaded, but doesn't prevent dvb_usb_it913x from working nicely. If an afatech 9015 stick is connected, such as an AverTV Volar Black HD (A850), it will be recognized and doesn't affect the other device. *But* it runs into trouble if the two devices were connected at bootup, or if the Cinergy stick is inserted after the other one : I am not sure what you do here but let it be clear. There is same ID used by af9015 and it913x. Both drivers are loaded when that ID appears. What I understand *both* drivers, af9015 and it913x should detect if device is correct or not. If device is af9015 then it913x should reject it with -ENODEV most likely without a I/O. If device is it913x then af9015 should reject the device similarly. And you must find out how to do that. It is not acceptable both drivers starts doing I/O for same device same time. regards Antti --- [1.264018] usb 2-1: new high speed USB device using ehci_hcd and address 2 [1.382487] usb 2-1: New USB device found, idVendor=0ccd, idProduct=0099 [1.382490] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [1.382492] usb 2-1: Product: DVB-T TV Stick [1.382494] usb 2-1: Manufacturer: ITE Technologies, Inc. [1.385073] input: ITE Technologies, Inc. DVB-T TV Stick as /devices/pci:00/:00:1d.7/usb2/2-1/2-1:1.1/input/input1 [1.385147] generic-usb 0003:0CCD:0099.0001: input,hidraw0: USB HID v1.01 Keyboard [ITE Technologies, Inc. DVB-T TV Stick] on usb-:00:1d.7-1 input1 [5.045527] usbcore: registered new interface driver dvb_usb_it913x [5.147276] it913x: Chip Version=01 Chip Type=9135 [5.147524] it913x: Firmware Version 33684956 [5.148649] it913x: Remote HID mode NOT SUPPORTED [5.149024] it913x: Dual mode=3 Tuner Type=0 [5.149028] usb 2-1: dvb_usbv2: found a 'ITE 9135(9006) Generic' in warm state [5.149077] usb 2-1: dvb_usbv2: will pass the complete MPEG2 transport stream to the software demuxer [5.149307] DVB: registering new adapter (ITE 9135(9006) Generic) [5.174907] usb 1-4: dvb_usbv2: downloading firmware from file 'dvb-usb-af9015.fw' [5.241934] usb 1-4: dvb_usbv2: found a 'AverMedia AVerTV Volar Black HD (A850)' in warm state [5.614827] usb 1-4: dvb_usbv2: will pass the complete MPEG2 transport stream to the software demuxer [5.614866] DVB: registering new adapter (AverMedia AVerTV Volar Black HD (A850)) [5.710026] af9013: firmware version 4.95.0.0 [5.712151] DVB: registering adapter 1 frontend 0 (Afatech AF9013)... [5.813139] MXL5005S: Attached at address 0xc6 [5.818896] usb 1-4: dvb_usbv2: 'AverMedia AVerTV Volar Black HD (A850)' successfully initialized and connected [7.266161] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 [7.266247] it913x-fe: ADF table value:00 [9.267200] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 [ 11.267153] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 [ 13.267250] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 [ 15.267089] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 [ 17.267162] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 [ 19.267139] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 [ 19.267218] it913x-fe: Crystal Frequency :1200 Adc Frequency :2025 ADC X2: 01 [ 19.267296] usb 2-1: dvb_usbv2: 'ITE 9135(9006) Generic' error while loading driver (-19) [ 19.267472] usb 2-1: dvb_usbv2: 'ITE 9135(9006) Generic' successfully deinitialized and disconnected --- I'm unfortunately not able to rewrite the driver, but I'm willing to provide any information about the device to help its correct identification. Here is what lsusb yields : --- Bus 002 Device 003: ID 0ccd:0099 TerraTec Electronic GmbH Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize064 idVendor 0x0ccd TerraTec Electronic GmbH idProduct 0x0099 bcdDevice2.00 iManufacturer 1 ITE Technologies, Inc. iProduct2 DVB-T TV Stick iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 71 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (B
Re: [PATCH] usb id addition for Terratec Cinergy T Stick Dual rev. 2
> I will NACK that initially because that USB ID already used by AF9015 driver. You have to explain / study what happens when AF9015 driver claims that device same time. Hi Antti With the Cinergy stick alone, dvb_usb_af9015 is predictably loaded, but doesn't prevent dvb_usb_it913x from working nicely. If an afatech 9015 stick is connected, such as an AverTV Volar Black HD (A850), it will be recognized and doesn't affect the other device. *But* it runs into trouble if the two devices were connected at bootup, or if the Cinergy stick is inserted after the other one : --- [1.264018] usb 2-1: new high speed USB device using ehci_hcd and address 2 [1.382487] usb 2-1: New USB device found, idVendor=0ccd, idProduct=0099 [1.382490] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [1.382492] usb 2-1: Product: DVB-T TV Stick [1.382494] usb 2-1: Manufacturer: ITE Technologies, Inc. [1.385073] input: ITE Technologies, Inc. DVB-T TV Stick as /devices/pci:00/:00:1d.7/usb2/2-1/2-1:1.1/input/input1 [1.385147] generic-usb 0003:0CCD:0099.0001: input,hidraw0: USB HID v1.01 Keyboard [ITE Technologies, Inc. DVB-T TV Stick] on usb-:00:1d.7-1 input1 [5.045527] usbcore: registered new interface driver dvb_usb_it913x [5.147276] it913x: Chip Version=01 Chip Type=9135 [5.147524] it913x: Firmware Version 33684956 [5.148649] it913x: Remote HID mode NOT SUPPORTED [5.149024] it913x: Dual mode=3 Tuner Type=0 [5.149028] usb 2-1: dvb_usbv2: found a 'ITE 9135(9006) Generic' in warm state [5.149077] usb 2-1: dvb_usbv2: will pass the complete MPEG2 transport stream to the software demuxer [5.149307] DVB: registering new adapter (ITE 9135(9006) Generic) [5.174907] usb 1-4: dvb_usbv2: downloading firmware from file 'dvb-usb-af9015.fw' [5.241934] usb 1-4: dvb_usbv2: found a 'AverMedia AVerTV Volar Black HD (A850)' in warm state [5.614827] usb 1-4: dvb_usbv2: will pass the complete MPEG2 transport stream to the software demuxer [5.614866] DVB: registering new adapter (AverMedia AVerTV Volar Black HD (A850)) [5.710026] af9013: firmware version 4.95.0.0 [5.712151] DVB: registering adapter 1 frontend 0 (Afatech AF9013)... [5.813139] MXL5005S: Attached at address 0xc6 [5.818896] usb 1-4: dvb_usbv2: 'AverMedia AVerTV Volar Black HD (A850)' successfully initialized and connected [7.266161] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 [7.266247] it913x-fe: ADF table value :00 [9.267200] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 [ 11.267153] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 [ 13.267250] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 [ 15.267089] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 [ 17.267162] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 [ 19.267139] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110 [ 19.267218] it913x-fe: Crystal Frequency :1200 Adc Frequency :2025 ADC X2: 01 [ 19.267296] usb 2-1: dvb_usbv2: 'ITE 9135(9006) Generic' error while loading driver (-19) [ 19.267472] usb 2-1: dvb_usbv2: 'ITE 9135(9006) Generic' successfully deinitialized and disconnected --- I'm unfortunately not able to rewrite the driver, but I'm willing to provide any information about the device to help its correct identification. Here is what lsusb yields : --- Bus 002 Device 003: ID 0ccd:0099 TerraTec Electronic GmbH Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize064 idVendor 0x0ccd TerraTec Electronic GmbH idProduct 0x0099 bcdDevice2.00 iManufacturer 1 ITE Technologies, Inc. iProduct2 DVB-T TV Stick iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 71 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes2 Transfer
Re: [PATCH] usb id addition for Terratec Cinergy T Stick Dual rev. 2
On 09/27/2012 10:06 PM, Damien Bally wrote: This patch adds support for new Terratec Cinergy T Stick Dual rev. 2. Signed-off-by: Damien Bally I will NACK that initially because that USB ID already used by AF9015 driver. You have to explain / study what happens when AF9015 driver claims that device same time. Antti -- http://palosaari.fi/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH] usb id addition for Terratec Cinergy T Stick Dual rev. 2
This patch adds support for new Terratec Cinergy T Stick Dual rev. 2.
Signed-off-by: Damien Bally
--- drivers/media/usb/dvb-usb-v2/it913x.c.orig 2012-09-17 19:04:59.819197365 +0200
+++ drivers/media/usb/dvb-usb-v2/it913x.c 2012-09-17 19:07:27.314015768 +0200
@@ -773,6 +773,9 @@ static const struct usb_device_id it913x
{ DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9006,
&it913x_properties, "ITE 9135(9006) Generic",
RC_MAP_IT913X_V1) },
+ { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC,
+ &it913x_properties, "ITE 9135(9006) Generic",
+ RC_MAP_IT913X_V1) },
{} /* Terminating entry */
};
