[PATCH v4 1/2] media: atmel-isi: add runtime pm support
The runtime pm resume/suspend will enable/disable pclk (ISI peripheral clock). And we need to call runtime_pm_get_sync()/runtime_pm_put() when we need access ISI registers. In atmel_isi_probe(), remove the isi disable code as in the moment ISI peripheral clock is not enable yet. In the meantime, as clock_start()/clock_stop() is used to control the mclk not ISI peripheral clock. So move this to start[stop]_streaming() function. Signed-off-by: Josh Wu josh...@atmel.com --- Changes in v4: - need to call pm_runtime_disable() in atmel_isi_remove(). - merged the patch which remove isi disable code in atmel_isi_probe() as isi peripherial clock is not enabled in this moment. - refine the commit log Changes in v3: None Changes in v2: - merged v1 two patch into one. - use runtime_pm_put() instead of runtime_pm_put_sync() - enable peripheral clock before access ISI registers. drivers/media/platform/soc_camera/atmel-isi.c | 54 +++ 1 file changed, 46 insertions(+), 8 deletions(-) diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c index 2879026..194e875 100644 --- a/drivers/media/platform/soc_camera/atmel-isi.c +++ b/drivers/media/platform/soc_camera/atmel-isi.c @@ -20,6 +20,7 @@ #include linux/kernel.h #include linux/module.h #include linux/platform_device.h +#include linux/pm_runtime.h #include linux/slab.h #include media/atmel-isi.h @@ -386,6 +387,8 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count) struct atmel_isi *isi = ici-priv; int ret; + pm_runtime_get_sync(ici-v4l2_dev.dev); + /* Reset ISI */ ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET); if (ret 0) { @@ -445,6 +448,8 @@ static void stop_streaming(struct vb2_queue *vq) ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE); if (ret 0) dev_err(icd-parent, Disable ISI timed out\n); + + pm_runtime_put(ici-v4l2_dev.dev); } static struct vb2_ops isi_video_qops = { @@ -516,7 +521,13 @@ static int isi_camera_set_fmt(struct soc_camera_device *icd, if (mf-code != xlate-code) return -EINVAL; + /* Enable PM and peripheral clock before operate isi registers */ + pm_runtime_get_sync(ici-v4l2_dev.dev); + ret = configure_geometry(isi, pix-width, pix-height, xlate-code); + + pm_runtime_put(ici-v4l2_dev.dev); + if (ret 0) return ret; @@ -736,14 +747,9 @@ static int isi_camera_clock_start(struct soc_camera_host *ici) struct atmel_isi *isi = ici-priv; int ret; - ret = clk_prepare_enable(isi-pclk); - if (ret) - return ret; - if (!IS_ERR(isi-mck)) { ret = clk_prepare_enable(isi-mck); if (ret) { - clk_disable_unprepare(isi-pclk); return ret; } } @@ -758,7 +764,6 @@ static void isi_camera_clock_stop(struct soc_camera_host *ici) if (!IS_ERR(isi-mck)) clk_disable_unprepare(isi-mck); - clk_disable_unprepare(isi-pclk); } static unsigned int isi_camera_poll(struct file *file, poll_table *pt) @@ -855,9 +860,14 @@ static int isi_camera_set_bus_param(struct soc_camera_device *icd) cfg1 |= ISI_CFG1_THMASK_BEATS_16; + /* Enable PM and peripheral clock before operate isi registers */ + pm_runtime_get_sync(ici-v4l2_dev.dev); + isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); isi_writel(isi, ISI_CFG1, cfg1); + pm_runtime_put(ici-v4l2_dev.dev); + return 0; } @@ -889,6 +899,7 @@ static int atmel_isi_remove(struct platform_device *pdev) sizeof(struct fbd) * MAX_BUFFER_NUM, isi-p_fb_descriptors, isi-fb_descriptors_phys); + pm_runtime_disable(pdev-dev); return 0; } @@ -1027,8 +1038,6 @@ static int atmel_isi_probe(struct platform_device *pdev) if (isi-pdata.data_width_flags ISI_DATAWIDTH_10) isi-width_flags |= 1 9; - isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); - irq = platform_get_irq(pdev, 0); if (IS_ERR_VALUE(irq)) { ret = irq; @@ -1049,6 +1058,9 @@ static int atmel_isi_probe(struct platform_device *pdev) soc_host-v4l2_dev.dev = pdev-dev; soc_host-nr= pdev-id; + pm_suspend_ignore_children(pdev-dev, true); + pm_runtime_enable(pdev-dev); + if (isi-pdata.asd_sizes) { soc_host-asd = isi-pdata.asd; soc_host-asd_sizes = isi-pdata.asd_sizes; @@ -1062,6 +1074,7 @@ static int atmel_isi_probe(struct platform_device *pdev) return 0; err_register_soc_camera_host: + pm_runtime_disable(pdev-dev); err_req_irq: err_ioremap: vb2_dma_contig_cleanup_ctx(isi-alloc_ctx); @@ -1074,6 +1087,30 @@ err_alloc_ctx: return ret; }
Re: [PATCH v4 1/2] media: atmel-isi: add runtime pm support
Hi Josh, Thank you for the patch. On Tuesday 26 May 2015 16:00:09 Josh Wu wrote: The runtime pm resume/suspend will enable/disable pclk (ISI peripheral clock). And we need to call runtime_pm_get_sync()/runtime_pm_put() when we need access ISI registers. In atmel_isi_probe(), remove the isi disable code as in the moment ISI peripheral clock is not enable yet. In the meantime, as clock_start()/clock_stop() is used to control the mclk not ISI peripheral clock. So move this to start[stop]_streaming() function. Signed-off-by: Josh Wu josh...@atmel.com --- Changes in v4: - need to call pm_runtime_disable() in atmel_isi_remove(). - merged the patch which remove isi disable code in atmel_isi_probe() as isi peripherial clock is not enabled in this moment. - refine the commit log Changes in v3: None Changes in v2: - merged v1 two patch into one. - use runtime_pm_put() instead of runtime_pm_put_sync() - enable peripheral clock before access ISI registers. drivers/media/platform/soc_camera/atmel-isi.c | 54 1 file changed, 46 insertions(+), 8 deletions(-) diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c index 2879026..194e875 100644 --- a/drivers/media/platform/soc_camera/atmel-isi.c +++ b/drivers/media/platform/soc_camera/atmel-isi.c @@ -20,6 +20,7 @@ #include linux/kernel.h #include linux/module.h #include linux/platform_device.h +#include linux/pm_runtime.h #include linux/slab.h #include media/atmel-isi.h @@ -386,6 +387,8 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count) struct atmel_isi *isi = ici-priv; int ret; + pm_runtime_get_sync(ici-v4l2_dev.dev); + /* Reset ISI */ ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET); if (ret 0) { You need to call pm_runtime_put() in the error path, otherwise an atmel_isi_wait_status() failure will keep the device enabled. @@ -445,6 +448,8 @@ static void stop_streaming(struct vb2_queue *vq) ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE); if (ret 0) dev_err(icd-parent, Disable ISI timed out\n); + + pm_runtime_put(ici-v4l2_dev.dev); } static struct vb2_ops isi_video_qops = { @@ -516,7 +521,13 @@ static int isi_camera_set_fmt(struct soc_camera_device *icd, if (mf-code != xlate-code) return -EINVAL; + /* Enable PM and peripheral clock before operate isi registers */ + pm_runtime_get_sync(ici-v4l2_dev.dev); + ret = configure_geometry(isi, pix-width, pix-height, xlate-code); + + pm_runtime_put(ici-v4l2_dev.dev); I think it would simplify the code to move the configure_geometry() call to start_streaming() as you already call pm_runtime_get_sync() there. That can be done in a separate patch though. + if (ret 0) return ret; @@ -736,14 +747,9 @@ static int isi_camera_clock_start(struct soc_camera_host *ici) struct atmel_isi *isi = ici-priv; int ret; - ret = clk_prepare_enable(isi-pclk); - if (ret) - return ret; - if (!IS_ERR(isi-mck)) { ret = clk_prepare_enable(isi-mck); if (ret) { - clk_disable_unprepare(isi-pclk); return ret; } } @@ -758,7 +764,6 @@ static void isi_camera_clock_stop(struct soc_camera_host *ici) if (!IS_ERR(isi-mck)) clk_disable_unprepare(isi-mck); - clk_disable_unprepare(isi-pclk); } static unsigned int isi_camera_poll(struct file *file, poll_table *pt) @@ -855,9 +860,14 @@ static int isi_camera_set_bus_param(struct soc_camera_device *icd) cfg1 |= ISI_CFG1_THMASK_BEATS_16; + /* Enable PM and peripheral clock before operate isi registers */ + pm_runtime_get_sync(ici-v4l2_dev.dev); + isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); isi_writel(isi, ISI_CFG1, cfg1); + pm_runtime_put(ici-v4l2_dev.dev); + return 0; } @@ -889,6 +899,7 @@ static int atmel_isi_remove(struct platform_device *pdev) sizeof(struct fbd) * MAX_BUFFER_NUM, isi-p_fb_descriptors, isi-fb_descriptors_phys); + pm_runtime_disable(pdev-dev); return 0; } @@ -1027,8 +1038,6 @@ static int atmel_isi_probe(struct platform_device *pdev) if (isi-pdata.data_width_flags ISI_DATAWIDTH_10) isi-width_flags |= 1 9; - isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); - irq = platform_get_irq(pdev, 0); if (IS_ERR_VALUE(irq)) { ret = irq; @@ -1049,6 +1058,9 @@ static int atmel_isi_probe(struct platform_device *pdev) soc_host-v4l2_dev.dev = pdev-dev; soc_host-nr= pdev-id; + pm_suspend_ignore_children(pdev-dev, true); + pm_runtime_enable(pdev-dev); + if (isi-pdata.asd_sizes) { soc_host-asd = isi-pdata.asd;
Re: [PATCH v4 1/2] media: atmel-isi: add runtime pm support
Hi, Laurent On 5/26/2015 4:16 PM, Laurent Pinchart wrote: Hi Josh, Thank you for the patch. On Tuesday 26 May 2015 16:00:09 Josh Wu wrote: The runtime pm resume/suspend will enable/disable pclk (ISI peripheral clock). And we need to call runtime_pm_get_sync()/runtime_pm_put() when we need access ISI registers. In atmel_isi_probe(), remove the isi disable code as in the moment ISI peripheral clock is not enable yet. In the meantime, as clock_start()/clock_stop() is used to control the mclk not ISI peripheral clock. So move this to start[stop]_streaming() function. Signed-off-by: Josh Wu josh...@atmel.com --- Changes in v4: - need to call pm_runtime_disable() in atmel_isi_remove(). - merged the patch which remove isi disable code in atmel_isi_probe() as isi peripherial clock is not enabled in this moment. - refine the commit log Changes in v3: None Changes in v2: - merged v1 two patch into one. - use runtime_pm_put() instead of runtime_pm_put_sync() - enable peripheral clock before access ISI registers. drivers/media/platform/soc_camera/atmel-isi.c | 54 1 file changed, 46 insertions(+), 8 deletions(-) diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c index 2879026..194e875 100644 --- a/drivers/media/platform/soc_camera/atmel-isi.c +++ b/drivers/media/platform/soc_camera/atmel-isi.c @@ -20,6 +20,7 @@ #include linux/kernel.h #include linux/module.h #include linux/platform_device.h +#include linux/pm_runtime.h #include linux/slab.h #include media/atmel-isi.h @@ -386,6 +387,8 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count) struct atmel_isi *isi = ici-priv; int ret; + pm_runtime_get_sync(ici-v4l2_dev.dev); + /* Reset ISI */ ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET); if (ret 0) { You need to call pm_runtime_put() in the error path, otherwise an atmel_isi_wait_status() failure will keep the device enabled. Nice catch. Thanks. @@ -445,6 +448,8 @@ static void stop_streaming(struct vb2_queue *vq) ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE); if (ret 0) dev_err(icd-parent, Disable ISI timed out\n); + + pm_runtime_put(ici-v4l2_dev.dev); } static struct vb2_ops isi_video_qops = { @@ -516,7 +521,13 @@ static int isi_camera_set_fmt(struct soc_camera_device *icd, if (mf-code != xlate-code) return -EINVAL; + /* Enable PM and peripheral clock before operate isi registers */ + pm_runtime_get_sync(ici-v4l2_dev.dev); + ret = configure_geometry(isi, pix-width, pix-height, xlate-code); + + pm_runtime_put(ici-v4l2_dev.dev); I think it would simplify the code to move the configure_geometry() call to start_streaming() as you already call pm_runtime_get_sync() there. That can be done in a separate patch though. I think it's a good idea. I would like to make this in a separate patch and not include in this series. In summary, I'll resend this patch just with the fix you mentioned in above (fix the error path in start_streaming). Is that okay for you? Best Regards, Josh Wu + if (ret 0) return ret; @@ -736,14 +747,9 @@ static int isi_camera_clock_start(struct soc_camera_host *ici) struct atmel_isi *isi = ici-priv; int ret; - ret = clk_prepare_enable(isi-pclk); - if (ret) - return ret; - if (!IS_ERR(isi-mck)) { ret = clk_prepare_enable(isi-mck); if (ret) { - clk_disable_unprepare(isi-pclk); return ret; } } @@ -758,7 +764,6 @@ static void isi_camera_clock_stop(struct soc_camera_host *ici) if (!IS_ERR(isi-mck)) clk_disable_unprepare(isi-mck); - clk_disable_unprepare(isi-pclk); } static unsigned int isi_camera_poll(struct file *file, poll_table *pt) @@ -855,9 +860,14 @@ static int isi_camera_set_bus_param(struct soc_camera_device *icd) cfg1 |= ISI_CFG1_THMASK_BEATS_16; + /* Enable PM and peripheral clock before operate isi registers */ + pm_runtime_get_sync(ici-v4l2_dev.dev); + isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); isi_writel(isi, ISI_CFG1, cfg1); + pm_runtime_put(ici-v4l2_dev.dev); + return 0; } @@ -889,6 +899,7 @@ static int atmel_isi_remove(struct platform_device *pdev) sizeof(struct fbd) * MAX_BUFFER_NUM, isi-p_fb_descriptors, isi-fb_descriptors_phys); + pm_runtime_disable(pdev-dev); return 0; } @@ -1027,8 +1038,6 @@ static int atmel_isi_probe(struct platform_device *pdev) if (isi-pdata.data_width_flags ISI_DATAWIDTH_10) isi-width_flags |= 1 9; - isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); - irq = platform_get_irq(pdev, 0); if (IS_ERR_VALUE(irq)) { ret = irq; @@
Re: [PATCH v4 1/2] media: atmel-isi: add runtime pm support
On 5/26/2015 5:14 PM, Josh Wu wrote: Hi, Laurent On 5/26/2015 4:16 PM, Laurent Pinchart wrote: Hi Josh, Thank you for the patch. On Tuesday 26 May 2015 16:00:09 Josh Wu wrote: The runtime pm resume/suspend will enable/disable pclk (ISI peripheral clock). And we need to call runtime_pm_get_sync()/runtime_pm_put() when we need access ISI registers. In atmel_isi_probe(), remove the isi disable code as in the moment ISI peripheral clock is not enable yet. In the meantime, as clock_start()/clock_stop() is used to control the mclk not ISI peripheral clock. So move this to start[stop]_streaming() function. Signed-off-by: Josh Wu josh...@atmel.com --- Changes in v4: - need to call pm_runtime_disable() in atmel_isi_remove(). - merged the patch which remove isi disable code in atmel_isi_probe() as isi peripherial clock is not enabled in this moment. - refine the commit log Changes in v3: None Changes in v2: - merged v1 two patch into one. - use runtime_pm_put() instead of runtime_pm_put_sync() - enable peripheral clock before access ISI registers. drivers/media/platform/soc_camera/atmel-isi.c | 54 1 file changed, 46 insertions(+), 8 deletions(-) diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c index 2879026..194e875 100644 --- a/drivers/media/platform/soc_camera/atmel-isi.c +++ b/drivers/media/platform/soc_camera/atmel-isi.c @@ -20,6 +20,7 @@ #include linux/kernel.h #include linux/module.h #include linux/platform_device.h +#include linux/pm_runtime.h #include linux/slab.h #include media/atmel-isi.h @@ -386,6 +387,8 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count) struct atmel_isi *isi = ici-priv; int ret; +pm_runtime_get_sync(ici-v4l2_dev.dev); + /* Reset ISI */ ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET); if (ret 0) { You need to call pm_runtime_put() in the error path, otherwise an atmel_isi_wait_status() failure will keep the device enabled. Nice catch. Thanks. @@ -445,6 +448,8 @@ static void stop_streaming(struct vb2_queue *vq) ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE); if (ret 0) dev_err(icd-parent, Disable ISI timed out\n); + +pm_runtime_put(ici-v4l2_dev.dev); } static struct vb2_ops isi_video_qops = { @@ -516,7 +521,13 @@ static int isi_camera_set_fmt(struct soc_camera_device *icd, if (mf-code != xlate-code) return -EINVAL; +/* Enable PM and peripheral clock before operate isi registers */ +pm_runtime_get_sync(ici-v4l2_dev.dev); + ret = configure_geometry(isi, pix-width, pix-height, xlate-code); + +pm_runtime_put(ici-v4l2_dev.dev); I think it would simplify the code to move the configure_geometry() call to start_streaming() as you already call pm_runtime_get_sync() there. That can be done in a separate patch though. I think it's a good idea. I would like to make this in a separate patch and not include in this series. In summary, I'll resend this patch just with the fix you mentioned in above (fix the error path in start_streaming). Is that okay for you? As I found another issue on stop_streaming(), so I sent a v5 series for this whole patch set with a new fix. Please check it. BTW: I don't include the simplify method: move configure_geometry() into start_streaming(), I perfer do that after this series is merged. Best Regards, Josh Wu Best Regards, Josh Wu + if (ret 0) return ret; @@ -736,14 +747,9 @@ static int isi_camera_clock_start(struct soc_camera_host *ici) struct atmel_isi *isi = ici-priv; int ret; -ret = clk_prepare_enable(isi-pclk); -if (ret) -return ret; - if (!IS_ERR(isi-mck)) { ret = clk_prepare_enable(isi-mck); if (ret) { -clk_disable_unprepare(isi-pclk); return ret; } } @@ -758,7 +764,6 @@ static void isi_camera_clock_stop(struct soc_camera_host *ici) if (!IS_ERR(isi-mck)) clk_disable_unprepare(isi-mck); -clk_disable_unprepare(isi-pclk); } static unsigned int isi_camera_poll(struct file *file, poll_table *pt) @@ -855,9 +860,14 @@ static int isi_camera_set_bus_param(struct soc_camera_device *icd) cfg1 |= ISI_CFG1_THMASK_BEATS_16; +/* Enable PM and peripheral clock before operate isi registers */ +pm_runtime_get_sync(ici-v4l2_dev.dev); + isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); isi_writel(isi, ISI_CFG1, cfg1); +pm_runtime_put(ici-v4l2_dev.dev); + return 0; } @@ -889,6 +899,7 @@ static int atmel_isi_remove(struct platform_device *pdev) sizeof(struct fbd) * MAX_BUFFER_NUM, isi-p_fb_descriptors, isi-fb_descriptors_phys); +pm_runtime_disable(pdev-dev); return 0; } @@ -1027,8 +1038,6 @@ static int atmel_isi_probe(struct platform_device *pdev) if (isi-pdata.data_width_flags ISI_DATAWIDTH_10)